Search

This study aims to improve the learning environment of a university viewing room by rehabilitating and refurbishing its ceiling, highlighting the critical role of infrastructure in education. The project is driven by the recognition that a well-maintained ceiling is essential for students' physiological well-being, eyesight health, safety, and comfort. Research indicates that poor air circulation in congested spaces with low ceilings can exacerbate the spread of airborne diseases, while inadequate ceiling illumination can harm visual health. Furthermore, exposed electric wires and an aesthetically unpleasing environment can distract students, negatively impacting their focus and learning outcomes. Upon approval, the project will proceed with planning, designing, and estimating, followed by the procurement of construction materials based on competitive bidding. All supplies will undergo thorough quality inspections. By addressing the structural inadequacies of the viewing room ceiling, this study aims to foster a safer and more conducive learning atmosphere, ultimately enhancing literacy outcomes and nurturing students' overall well-being. The findings of this project will underscore the significant impact of proper infrastructure on educational experiences, offering insights to the administration on the importance of maintaining high standards in school facilities. [ABSTRACT FROM AUTHOR]

Underwater electric wire explosion (UEWE) has great potential as a shockwave source for medical and industrial applications. This paper focuses on the process of the sub-millisecond underwater electrical wire explosion (smUEWE). The study compared the smUEWE and the microsecond underwater electrical wire explosion, which revealed the occurrence of partial vaporization under smUEWE, leading to the formation of bamboo-shaped cavities and frontal shock waves. The experiments of smUEWE were carried out under different stored energy, the results indicated the plasma shrinkage and cavity separation during the overall ionization process. Additionally, the study observed secondary breakdown caused by the uneven distribution of ionization products. An analysis was conducted on smUEWE considering partial vaporization, which divided the electrical explosion into a positive feedback process which promoted the axial instability and a negative feedback process which formed the uniform plasma channel. The analysis results was consistent with the experimental results. [ABSTRACT FROM AUTHOR]

The global focus is directed towards extensive ingestion and bioaccumulation of plastic additives and organic dyes such as Tetrabromobisphenol A (TBBPA) and Auramine-O (AO). However, their recalcitrant properties make them toxic chemicals and require an efficient removal strategy based on waste-derived semiconductor nanocomposite. The present study involves the structural configuration of NiFe 2 O 4 created through green methods, integrated into waste shell CaO to create the NiFe 2 O 4 @CaO (NFC) nanocomposite. P-XRD verified the crystalline catalyst, while microscopic examination unveiled spherical NiFe 2 O 4 particles decorating the irregular surface of CaO. The green NFC nanocomposite exhibited superior degradation efficiency for TBBPA (92 %) and AO (95 %) compared to the individual CaO and NiFe 2 O 4 nanoparticles under conditions of minimal pollutant concentration (10 mg L−1), utilizing a catalyst load of 30 mg at neutral pH under natural Sunlight. 1st-order reaction kinetics following early Langmuir adsorption and degradation at optimum conditions. Involvement of •OH, O 2 −•, and holes in the photocatalysis mechanism suggested that hydroxyl radicals significantly contributed to breaking complex molecules of TBBPA and AO, as revealed in Scavenger analysis. The removal of real water samples was also analyzed. The release of TBPPA from underwater, which has toy materials and electric wire materials, was investigated at various time intervals, along with the evaluation of the degradation of the leached TBBPA. Also, NFC has exhibited exceptional sustainability, retaining its usefulness over nine cycles without significant action decreases. In conclusion, the environmentally welcoming NFC is a cost-effective composite for industries and wastewater pollutants removal with good surface properties. [ABSTRACT FROM AUTHOR]

Owing to the intrinsic excellent mechanical, electrical, and thermal properties of carbon nanotubes (CNTs), carbon nanotube fibers (CNTFs) have been expected to become promising candidates for the next-generation of high-performance fibers. They have received considerable interest for cutting-edge applications, such as ultra-light electric wire, aerospace craft, military equipment, and space elevators. Wet-spinning is a broadly utilized commercial technique for high-performance fiber manufacturing. Thus, compared with array spinning from drawable CNTs vertical array and direct dry spinning from floating catalyst chemical vapor deposition (FCCVD), the wet-spinning technique is considered to be a promising strategy to realize the production of CNTFs on a large scale. In this tutorial review, we begin with a summative description of CNTFs wet-spinning process. Then, we discuss the high-concentration CNTs wet-spinning dope preparation strategies and corresponding non-covalent adsorption/charge transfer mechanisms. The filament solidification during the coagulation process is another critical procedure for determining the configurations and properties for derived CNTFs. Next, we discuss post-treatment, including continuous drafting and thermal annealing, to further optimize the CNTs orientation and compact configuration. Finally, we summarize the physical property-structure relationship to give insights for further performance promotion in order to satisfy the prerequisite for detailed application. Insights into propelling high-performance CNTFs production from lab-scale to industry-scale are proposed, in anticipation of this novel fiber having an impact on our lives in the near future. [ABSTRACT FROM AUTHOR]

Over the many decades of studying the electric explosion of thin wires (EEW), researchers have developed and accepted certain notions about this process. Despite the lack of proof behind certain established assertions and, sometimes, their contradiction with the results of recent experiments, they are still widely used to describe and interpret new data. In the first place, this concerns the concept that the EEW is a fast evaporation of metal as a result of the dissipation of Joule energy inside it. Another fundamental notion that is used during the analysis of the experimental results and in model calculations is the uniform distribution of matter along the cross section of the wire core during the explosion. To date, the nature and mechanism of the appearance of strata, i.e., the periodicity observed in many images of the EEW, remain unexplained. Using the traditional notions of the EEW, even in experiments conducted at a high level, does not allow one to correctly interpret the obtained results and, as a whole, does not facilitate the progress in understanding the complicated physics of the process of wire explosion. Therefore, the traditional concepts of the EEW have long required a revision. This work summarizes the results of modern research in this area and considers its relation to the previous works. It also proposes new approaches to the studies of the EEW dynamics and to the understanding of the processes of energy transformation in matter during its rapid heating by the electric current. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to investigate the surface integrity features, including surface roughness (SR), recast layer (RL), material migration, topography and wire wear pattern in rough and trim-cut wire electric discharge machine (WEDM) of hybrid composite (Al6061-90%/SiC-2.5%/TiB2-7.5%). Design/methodology/approach: Effects of four important factors, namely, rough-cut history (RCH), pulse on time (Ton), peak current (IP) and wire offset (WO) have been assessed on the responses of interest for trim-cut WEDM. Box–Behnken design (RSM) was used to formulate the experimentation plan. Quantitative indices of surface integrity, namely, SR and RL, and selected samples have been investigated for qualitative analysis, namely, surface topography, material migration and wire wear pattern. Findings: Ton and IP are found to be most significant, whereas RCH and WO are found insignificant for SR. Ton and WO were found to be the most significant factors affecting RL. After trim cut, an RL of thickness 8.26 µm is observed if the initial rough cut has been accomplished at high discharge energy setting. Whereas the best value of RL thickness, i.e. 5.36 µm, can be realized with low level of RCH. A significant decrease in the presence of foreign materials is recorded, indicating its strong correlation with the discharge energy used during machining. Originality/value: Investigation on surface integrity features for machining of hybrid composite through rough and trim-cut WEDM has been reported by only a limited number of researchers in the past. This study is attempted at fulfilling few vital gaps by addressing the issues such as evaluation of the efficacy of trim cutting under different discharge energy conditions (using RCH), analysis of wire wear pattern in both rough and trim-cut modes and investigation of the wire breakage phenomenon during machining. [ABSTRACT FROM AUTHOR]

Solar‐driven interfacial evaporation is an emerging desalination technology that can potentially relieve the freshwater scarcity issue. To obtain high and continuous evaporation rates for all‐weather, chemically engineered structural materials have been widely explored for simultaneous photothermal and electrothermal conversion. However, many previously reported fabrication processes involve poor integration and considerable energy loss. Herein, a scalable photo‐electro‐thermal textile is proposed to enable high efficiency, long‐term salt rejection, and solar‐driven desalination. Specifically, the photo‐electro‐thermal yarns with a core (commercial electric wire)‐shell (polypyrrole‐decorated Tencel) structure realize the integration of electrothermal and photothermal conversion. The wrapping eccentricity of 1.53 mm and pitch of 3 T cm−1 for the electric wire are rationally regulated to achieve a high surface temperature of over 52 °C at a 3 V DC input. As a result, exceptional and stable evaporation rates of 5.57 kg m−2 h−1 (pure water) and 4.89 kg m−2 h−1 (3.5 wt.% brine) under 1 kW m−2·radiation with a 3 V input voltage are realized. Practical application shows that the textiles can achieve high water collection of over 46 kg m−2 d−1 over the whole day of operation. The constructed photo‐electro‐thermal textile‐based evaporator provides an effective method for commercial and scalable photo‐electro‐thermal conversion to achieve high‐performance and salt‐resistant solar‐driven desalination. [ABSTRACT FROM AUTHOR]

Obstructive sleep apnea (OSA) is a prevalent source of sleep-disordered breathing. OSA is most commonly associated with dysfunctions in the genioglossus (GG) muscle. In this study, we present the first version of a medical device that produces an electromyogram (EMG) of the GG. The prototype is composed of a (custom-made) 3D-printed mouthpiece. Impressions were taken for the lower arch and scanned with a lab scanner to be converted into digital impressions. ExoCad software was used to design the appliance. Fusion 360 software was then used to modify the design and create tubes to house the electrodes in a bilateral configuration to secure excellent and continuous contact with the GG muscle. Silver–silver chloride electrodes were incorporated within the appliance through the created tubes to produce a muscle EMG. In this preliminary prototype, an EMG amplifier was placed outside the mouth, and isolated electric wires were connected to the amplifier input. To test the design, we ran experiments to acquire EMG signals from a group of OSA patients and a control group in wakefulness. The GG EMGs were acquired from the participants for 60 s in a resting state whereby they rested their tongues without performing any movement. Then, the subjects pushed their tongues against the fontal teeth with steady force while keeping the mouth closed (active state). Several features were extracted from the acquired EMGs, and statistical tests were applied to evaluate the significant differences in these features between the two groups. The results showed that the mean power and standard deviation were higher in the control group than in the OSA group (p < 0.01). Regarding the wavelength during the active state, the control group had a significantly longer wavelength than the OSA group (p < 0.01). Meanwhile, the mean frequency was higher in the OSA group (p < 0.01) at rest. These findings support research that showed that impairment in GG activity continues in the daytime and does not only occur during sleep. Future research should focus on developing the device to be more user-friendly and easily used at home during wakefulness and sleep. [ABSTRACT FROM AUTHOR]

Emulsion explosives have become a hot topic in various studies due to their explosive combustion characteristics and detonation performance under different environmental pressures. The thermal safety of an emulsified matrix was studied with ignition energy as the characterization. A minimum ignition energy test experimental system for emulsion matrices was established in this research. The system simulated the occurrence of hot spots inside emulsion matrices using an electric heating wire. The effect of bubbles on the thermal safety of the emulsified matrix was studied by adding expanded perlite additive to the emulsified matrix. This study investigated the variation trend in the minimum ignition energy of the emulsion matrix under the coupled effect of bubbles and ambient pressure using the orthogonal experimental method. The impacts of two factors on the thermal safety of the emulsion matrix were studied at different hot-spot temperatures. Coupled analysis experiments were conducted on emulsion matrices containing 0%, 1.5%, and 3% expanded perlite under pressure environments of 1 atm, 2 atm, and 3 atm. The critical hot-spot temperature of the emulsion matrix significantly decreases with increasing bubble content at 1 atm and 2 atm pressures, as revealed by intuitive analysis and analysis of variance. However, at 3 atm of pressure, the bubble content in the emulsion matrix has no significant effect on its critical hot-spot temperature. The results show that the thermal safety of the emulsified matrix decreases with the increase in the content of expanded perlite and environmental pressure, and the influence of environmental pressure is more significant than that of the bubble content. This paper's research content serves as a reference for a safe emulsified matrix and as an experimental basis for establishing a production line for developing new equipment. [ABSTRACT FROM AUTHOR]

Wire saw cutting technology has been widely used in the processing of various hard and brittle materials, but there are also some shortcomings and limitations gradually emerging. Hybrid cutting technology based on wire sawing has gradually developed to further meet the needs of high efficiency, high surface quality, and low tool wear for cutting hard and brittle materials. The research progress of four wire sawing-based hybrid cutting methods, including electrochemical wire sawing, diamond wire electric discharge sawing, diamond wire electrochemical discharge sawing, and ultrasonic-assisted diamond wire sawing, is reviewed from the aspects of basic principles, process performance, and influencing factors in this paper. The advantages and disadvantages of each method are also briefly summarized. Finally, the future development and research direction are prospected. The content of this paper would provide help for present and future researchers and engineers in the identification of the significant parameters for getting better process performance. [ABSTRACT FROM AUTHOR]

A model of opposed flame spread along thin electric wires is developed to estimate the variation of flame spread rate ( $ {V_\textrm{f}} $ V f ) with oxygen concentrations and oxidiser flow velocity. The length of pyrolysis zone ( $ {L_{\textrm{py}}} $ L py ) and $ {V_\textrm{f}} $ V f are treated as eigenvalues of the problem, and one-dimensional energy balance equations for the wire core and insulation are formulated to derive their solutions. To obtain a set of steady solutions for $ {L_{\textrm{py}}} $ L py and $ {V_\textrm{f}} $ V f , the macroscopic energy balance equation for the entire system is calculated from the one-dimensional energy balance equations with appropriate boundary conditions. Since the equations are nonlinear function of $ {L_{\textrm{py}}} $ L py and $ {V_\textrm{f}} $ V f , multiple solutions appear. The physical meaning of each solution is evaluated based on the deviation of energy from the equilibrium. Comparison of the temperature distribution along the wire with experimental data confirms that the model reproduces well the actual flame spread process. The variation of $ {V_\textrm{f}} $ V f with oxygen concentration shows a C-shaped curve. The upper branch is the stable solution, and the lower branch is the unstable solution and the merging point of two branches correspond to the limit condition for flame spread. Therefore, the model can be used to estimate the limiting oxygen concentration based on the existence of a solution for $ {V_\textrm{f}} $ V f . Furthermore, the variation of $ {V_\textrm{f}} $ V f with oxidiser flow velocity shows O-shaped curve, and it is confirmed that radiative extinction under low flow velocity and blow-off under high flow velocity can also be estimated with the model. Mapping of variations of radiative extinction and blow-off extinction with oxygen concentration reveals the U-shaped flammability diagram. The predicted flame spread limits are in good agreement with the limiting oxygen concentrations measured in both microgravity and normal gravity, demonstrating the validity of using this model to predict flammability characteristics of electric wires under various oxidiser flow velocity. [ABSTRACT FROM AUTHOR]

Machining of accurate geometrical profiles like triangles, squares or circles with good surface finish and high productivity in metal matrix composites is required for various industrial applications. Thermoelectic principle-based wire electric discharge machine (WEDM) can be conventionally used to overcome the difficulty which occurs during the machining of composites due to the presence of hard abrasive particles. Therefore, in this investigation, three geometrical profiles possessing equal perimeters were produced in 5 mm thick aluminum metal matrix composites (AMMCs) by WEDM. In order to analyze the effect of reinforcements three different AMMCs containing Al6061 as a matrix were produced by stir casting method. The fabricated composites, respectively, contain 10% alumina ( Al 2 O 3 ), 10% silicon carbide (SiC) and a mixture of 5% Al 2 O 3 with 5% SiC. The individual effect of various input parameters like pulse-on time (T on = 30-50 μ s), pulse-off time (T off = 6–12 μ s), current (I = 1–5 A) and geometrical shapes (circle, triangle, and square) on cutting velocity (CV) and surface roughness (SR) were investigated. Furthermore, parametric analysis using regression models was also performed to evaluate the simultaneous effect of two interacting parameters on CV and SR. The study reveals that in the case of hybrid composite, CV decreases with T on and SR is always higher for triangular profiles when T on and I change. The regression plots indicate that the interaction effect of T off × I plays a major role in CV for all three composites. Multiobjective optimization using a composite desirability approach reveals a marginal increase in CV (8.58%) and a significant reduction (57.72%) in SR at optimal input parameters for Al6061–10% SiC. The morphological analysis at optimal input parameters indicates a significant reduction in resolidified metal drops and microcraters. [ABSTRACT FROM AUTHOR]

Glycidyl azide polymer (GAP)-coated sub-micron aluminum (sub-mAl@GAP) particles exhibit higher heat release than their uncoated counterparts under low heating rates. However, their application in explosives has been hindered due to a lack of understanding of their energy release characteristics under heating rates of detonation levels. To address this problem, the energy release performances of sub-mAl@GAP particles under ultrafast heating rates stimulated by an electric explosion of wire and high-energy laser were studied. The results showed that the reaction of sub-mAl@GAP particles was more violent than that of an uncoated counterpart under an electric explosion stimulus. Additionally, the reaction time of the former was 0.4 ms shorter than that of the latter. In addition, the propagations of shock waves of the sub-mAl@GAP and sub-mAl were analyzed. The propagation distances of shock waves of the sub-mAl@GAP were all longer than those of sub-mAl under laser fluences of 0.5 J/cm2, 1.2 J/cm2, and 2.4 J/cm2. The distance difference gradually increased with the decrease in the laser fluence. Under a laser fluence of 0.5 J/cm2, the velocity and distance differences of the sub-mAl@GAP and sub-mAl were both the largest due to the energy contribution from the GAP. In conclusion, the fast decomposition rate of the GAP and its energy contribution would benefit the energy release of sub-mAl under ultrafast heating rates. [ABSTRACT FROM AUTHOR]

Melt pond is one of the most significant and important features of Arctic sea ice in the summer and can dramatically reduce the albedo of ice, promoting more energy into the upper ocean. The observation of the seasonal evolution of melt pond can improve our fundamental understanding of the role and sensitivity of sea ice in the context of global climate change. In this study, an ice-tethered observation system is developed for melt pond evolution with vision and temperature profile measurements. The system composition, structure of the ice-tethered buoy, freeze-resistant camera, and thermistor chain are analyzed. A sealed shell and electric heating wires are used to increase the temperature to around the camera in low-temperature environments. The ice thickness and depth of melt pond can be inverted using a specific interface recognition algorithm. A low-light image enhancement strategy is proposed to improve the quality of images under the low lighting conditions in polar regions. The proposed system was tested in the second reservoir of Fen River, Yellow River, from 15 January to 27 January 2021. An artificial freshwater pond was used as the location for thermistor chain deployment and observation. The differences in mean square error (MSE), peak signal-to-noise ratio (PSNR), and feature similarity index (FSIM) between the original and enhanced images indicate that the proposed algorithm is suitable for low-light image enhancement. The research on the ice-tethered observation system will provide a new framework and technical support for the seasonal observation for melt pond. [ABSTRACT FROM AUTHOR]

With the development of the social economy and the improvement of electrification, cables and wires play an important role in people's lives and industrial development. Meanwhile, the large-scale laying of cables has also made them a fire hazard that cannot be ignored in land construction such as residential buildings, utility tunnels, nuclear power plants, refineries, marine systems such as submarines and ships, and airborne systems such as spacecrafts and aircrafts. In this work, studies on fire the characteristics of cables and wires over the last decades have been reviewed. Based on different experimental forms and objects (laboratory wires and commercial cables), this paper summarizes the theories of the fire dynamics in wire combustion, including the models of ignition and flame propagation, the criteria for blowing off and quenching, and the critical conditions for dripping behavior. The effects of materials, layouts, and environments on wire combustion phenomena such as airflow, ambient pressure, oxygen, gravity, and orientation angle have been discussed in detail according to the theories of heat transfer and combustion. In addition, test standards and studies on the fire behavior and release of toxic gases of commercial cables have also been fully described. Through the summary of the above content, it is expected to build a preliminary theoretical framework and future research directions for researchers in the field of cable fires. [ABSTRACT FROM AUTHOR]

The authors previously developed a flexible and multi-degree-of-freedom pneumatic artificial rubber muscle that uses shape-memory polymer (SMP) sheets with an embedded electrical heating wire. The bending direction and initial shape of the muscle can be changed by utilizing the large difference in the elastic modulus below and above the glass transition temperature, shape fixity, and shape recovery of SMPs. In this study, to improve performance, we propose a shape-memory composite (SMC) sheet that consists of SMP sheets with an embedded shape-memory alloy (SMA) wire used as an electric heating wire. The mechanical properties of the previously developed SMP sheets and the proposed SMC sheets are compared through shape recovery, bending, and tensile tests using prototypes. The motion of the artificial muscle with various samples attached is evaluated through an isometric test and bending angle measurements. The experimental results confirm that the use of the SMA wire improves the production reproducibility and shape recovery of the SMP sheets without degrading other mechanical properties or actuator performance. [ABSTRACT FROM AUTHOR]

It is the refrigerator that is frequently used in homes. Freezing and refrigerating temperature sensors are significant temperature-sensing components in the refrigerator. However, it is simple to insert the temperature sensor wires erroneously during the manufacturing process. Currently, there is no effective method to detect the correctness of the wiring harnesses. We propose a novel detection method that combines machine vision and resistance analysis for the wiring harnesses of refrigerator temperature sensors. We utilized machine vision technology to determine the color and insertion position of each wire in the wiring harnesses. We distinguish the types of sensors by analyzing the resistance range of the temperature sensors. We combine two approaches to detect the wiring harnesses connecting the temperature sensors. The experimental results demonstrate that the proposed method can effectively detect the correctness of the wiring harnesses connecting the temperature sensors, and the accuracy reaches 99.19%. The proposed method has a good generalization in other electrical wiring harness detection problems. [ABSTRACT FROM AUTHOR]

Modern aircraft are being equipped with high-voltage and direct current (HVDC) architectures to address the increase in electrical power. Unfortunately, the rise of voltage in low pressure environments brings about a problem with unexpected ionisation phenomena such as arcing. Series arcs in HVDC cannot be detected with conventional means, and finding methods to avoid the potentially catastrophic hazards of these events becomes critical to assure further development of more electric and all electric aviation. Inductive sensors are one of the most promising detectors in terms of sensitivity, cost, weight and adaptability to the circuit wiring in aircraft electric systems. In particular, the solutions based on the detection of the high-frequency (HF) pulses created by the arc have been found to be good candidates in practical applications. This paper proposes a method for designing series arc fault inductive sensors able to capture the aforementioned HF pulses. The methodology relies on modelling the parameters of the sensor based on the physics that intervenes in the HF pulses interaction with the sensor itself. To this end, a comparative analysis with different topologies is carried out. For every approach, the key parameters influencing the HF pulses detection are studied theoretically, modelled with a finite elements method and tested in the laboratory in terms of frequency response. The final validation tests were conducted using the prototypes in real cases of detection of DC series arcs. [ABSTRACT FROM AUTHOR]

The intend of current study was focused on the prediction of material removal rate (MRR) and surface roughness (SR) for the AA7050-SiO2 composite during wire electric erosion or discharge machining (WEDM) process using a brass (Br) wire electrode. Here, stir casting process was employed to develop the AA7050 matrix composite with inclusion of 10wt.% SiO2 particle reinforcement. The multi-objective optimization method of Technique for order preference by similarity to ideal solution (TOP SIS) approach has been applied to find out the optimal setting of input machining parameters such as peak current (Ip), pulse-on time (Ton) and pulse-off time (Toff). Furthermore, the significant effects of parameters were identified by analysis of variance (ANOVA). Taguchi L9 (33) orthogonal design has been formulated to perform the experimental work. TOP SIS results stated that the optimal setting of Ip at 30 amps, Ton of 130 µs and Toff of 55 µs provide the better MRR with lesser SR. The ANOVA results noticed that Ip has the prime noteworthy parameter over the adopted responses having a contribution of 45.67%, followed by Ton (32.34%) and Toff (12.26%), respectively. The confirmation test was carried out by the optimal parameters setting to verify the predicted results. Finally, the scanning electron microscopy (SEM) test was carried out for the machined surface of the composite specimen and it was reveals that the formation of craters and recast layer thickness in the machined surfaces. [ABSTRACT FROM AUTHOR]

The pantograph is an essential component that provides electrical contact between the overhead wires and the electric train. The quality of the current collection in high-speed trains is directly influenced by the mechanical interaction between the pantograph collector head and the overhead contact line. To overcome these challenges and improve pantograph performance, researchers and engineers have explored innovative solutions, including the introduction of active control mechanisms. Excitation by the vehicle is one of the normal disturbances in the dynamic interaction of the pantograph and the overhead line. The vertical effects of vehicle-track vibrations on the interaction between the pantograph and the overhead contact line have not yet been adequately researched. To fill this research gap, this study establishes models for both the pantograph-catenary interaction and the vehicle-track system. In this study, the performance of the modified Skyhook-Proportional-Integral-Derivative (PID) controller was investigated for a half-body of a railway pantograph-catenary system. Track irregularities such as step, sine, and random were applied to perturb the suspension system. The performance of both passive and active systems was investigated by considering the track irregularities as a basis. The root mean square analysis (RMS) found that active displacement control of pantograph-catenary systems for a half-body railway model equipped with modified Skyhook-PID controllers performed better than the passive systems. In summary, the future experimental approach for active half-body railway model could incorporate this simple modification of the Skyhook-PID controller. [ABSTRACT FROM AUTHOR]

In response to the challenges associated with the misassembly, omission, and low manual inspection efficiency in automobile wiring harness relay assemblies, a novel online detection system has been engineered. This system consists of a mobile-based visual imaging system and an improved YOLOv5-based detection algorithm that tracks human movement to acquire images and videos. The system is coupled with deep learning for real-time detection and recognition for error-proofing the installation process of automotive wiring harness relays. This innovation aims to facilitate error-proof inspection during the assembly process of automotive wiring harness relays. The YOLOv5s model is augmented with an Adaptive Spatial Feature Fusion (ASFF) module, enhancing multi-scale feature integration capabilities. A Global Context Network (GCNet) is incorporated into the C3 module to emphasize target information from a global perspective. Additionally, the replacement of standard Convolution (Conv) modules with Global Sparse Convolution (GSConv) modules in the Neck section effectively reduces computational costs while sustaining overall performance efficacy. The experimental results show that the detection system achieved a comprehensive accuracy rate of 99.2% and an F1 score of 99.29. The system possesses high accuracy and stability, enabling flexible and intelligent target detection applications in the automotive industry. [ABSTRACT FROM AUTHOR]

We describe the creation of a conductive microcavity based on the assembly of two pieces of carbon nanotube buckypaper for the entrapment of two enzymes, horseradish peroxidase (HRP) and glucose oxidase (GOx), as well as a redox mediator: 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid diammonium salt (ABTS). The hollow electrode, employing GOx, HRP, and the mediator, as an electrochemical enzyme cascade model, is utilized for glucose sensing at a potential of 50 mV vs. Ag/AgCl. This bienzyme electrode demonstrates the ability to oxidize glucose by GOx and subsequently convert H2O2 to water via the electrical wiring of HRP by ABTS. Different redox mediators (ABTS, potassium hexacyanoferrate (III), and hydroquinone) are tested for HRP wiring, with ABTS being the best candidate for the electroenzymatic reduction of H2O2. To demonstrate the possibility to optimize the enzyme cascade configuration, the enzyme ratio is studied with 1 mg HRP combined with variable amounts of GOx (1–4 mg) and 2 mg GOx combined with variable amounts of HRP (0.5–2 mg). The bienzyme electrode shows continuous operational stability for over a week and an excellent storage stability in phosphate buffer, with a decay of catalytic current by only 29% for 1 mM glucose after 100 days. [ABSTRACT FROM AUTHOR]

Interpretation of extracellular recordings can be challenging due to the long range of electric field. This challenge can be mitigated by estimating the current source density (CSD). Here we introduce kCSD-python, an open Python package implementing Kernel Current Source Density (kCSD) method and related tools to facilitate CSD analysis of experimental data and the interpretation of results. We show how to counter the limitations imposed by noise and assumptions in the method itself. kCSD-python allows CSD estimation for an arbitrary distribution of electrodes in 1D, 2D, and 3D, assuming distributions of sources in tissue, a slice, or in a single cell, and includes a range of diagnostic aids. We demonstrate its features in a Jupyter Notebook tutorial which illustrates a typical analytical workflow and main functionalities useful in validating analysis results. Author summary: Recording electric potential with wires inserted in the brain is a standard method in neuroscientist's arsenal for a century. This extracellular potential reflects electric activity of billions of neural cells processing incoming information and our deepest thoughts. It is difficult to interpret because the effect of every single cell activity propagates in space like a wave in a lake after a stone is thrown. Therefore, every electric recording is a sum of billions of stronger and weaker contributions from close and remote cells, respectively. It is easier to understand the local activity of the brain when we reconstruct the distribution of the sources contributing to the measurements. This is similar to reconstructing the information on where and when stones where thrown into the lake from wiggling of multiple buoys placed on the water surface. The techniques for source reconstruction are called the Current Source Density methods. Early techniques required distributions of electrodes on regular grids. Our kernel Current Source Density method can reconstruct this activity from arbitrary distribution of electrodes and can take into account measurement noise. Here we present our software toolbox, kCSD-python, which implements this method. It comes with a number of tools for efficient estimation, for testing reliability of the results, and with several tutorials showing how to use it. [ABSTRACT FROM AUTHOR]

Wire cut electric discharge machining (WCEDM) is a flexible and more essential for the precise machining of hard materials like composites and super alloys. In order to improve the surface texture as the main focus of the WCEDM process, the expansion of the fundamental procedural perceptive is very important. This paper mainly focuses on the prediction of surface quality of Al-Fe-Si alloy (AA8011) matrix composites during the WCEDM process. For the fabrication of composites, the varying proportions (0, 5, 10 and 15 wt.%) of ZrO2 ceramic particle were incorporated with AA8011 matrix alloy by using stir casting method. In the machining studies, to investigate the effects of reinforcement (wt. %) and the WCEDM process parameters, namely pulse current (amps), pulse-on time (μ s) and pulse-off time (μ s) on machining performance like surface roughness (SR) of the proposed composites. Based on the selection of parameters and their levels, an L16 (44) orthogonal array was most suitable for conducting the WCEDM experiments. A Taguchi technique was employed in this study to determine the optimal conditions of machining parameters through the signal-to-noise (S/N) ratio analysis. The result shows that the minimum SR is achieved at 5 wt.% of reinforcement, 6 amps of pulse current, 110 μ s of pulse-on time and 50 μ s of pulse-off time, respectively. Analysis of variance (ANOVA) results revealed that the reinforcement wt.% has the primary significant factor on SR, trailed by pulse-on time and pulse current, respectively. Furthermore, the regression equation was also developed to predict the SR and that values well agree with the experimental SR. [ABSTRACT FROM AUTHOR]

Electrocution deaths are mostly accidental. However, reconstruction of events in unusual electrocution death is challenging. This article reports an accidental death due to electrocution in a highly unusual circumstance, in which a truck driver reversing his vehicle was electrocuted when his truck inadvertently touched an overhead high‐voltage wire. The electric injury marks were present over the sole of the right foot. The scene investigation revealed that the high‐voltage wire was loose and was below the level of the prescribed height. The truck was passing over an elevated area made up of dirt and stone. The interior of the cabin of the truck revealed a few non‐insulated metallic areas over the floor of the truck, between the accelerator and the brake, which were attributed as the sources of entry of electricity into the body. The electric injury marks were different than those usually seen in high‐voltage electrocution as there was an intermediate object (truck) involved, and the contact period between the truck and the electric wire was minimal. This fatality was attributed to the non‐proper insulation of the interior of the truck, the negligent driving of the truck driver over the elevated surface, and the loose high‐voltage wire without proper maintenance. [ABSTRACT FROM AUTHOR]

The transmission capacity of electrical wiring has come to be viewed as a bottleneck in system processing performance in conjunction with increases in datacenter traffic and the development of high-performance large-scale integration (LSI) by transistor miniaturization. To solve this problem, there is a strong demand for photonics-electronics convergence technologies for applying optical transmission that can easily increase capacity to wiring positioned close to electronic circuits. In this article, we talk with NTT Distinguished Researcher Tatsurou Hiraki to learn about his research and development of "high-performance optical devices with integration of heterogeneous materials" as a rising researcher opening up a new future. [ABSTRACT FROM AUTHOR]

A new composite with a core–shell structure based on magnesium hydride and finely dispersed aluminum powder with an aluminum oxide shell was mechanically synthesized. We used magnesium chips to produce magnesium hydride and aluminum wire after exploitation to produce nano-sized aluminum powder. The beginning of the hydrogen release from the composite occurred at the temperature of 117 °C. The maximum desorption temperature from the MgH2-EEWAl composite (10 wt.%) was 336 °C, compared to pure magnesium hydride—417 °C. The mass content of hydrogen in the composite was 5.5 wt.%. The positive effect of the aluminum powder produced by the electric explosion of wires method on reducing the activation energy of desorption was demonstrated. The composite's desorption activation energy was found to be 109 ± 1 kJ/mol, while pure magnesium hydride had an activation energy of 161 ± 2 kJ/mol. The results obtained make it possible to expand the possibility of using magnesium and aluminum waste for hydrogen energy. [ABSTRACT FROM AUTHOR]

In this work, the samples of the WC-Fe-Ni-Co composition were obtained and studied. Alloy NiCo 29-18 is used as a binder (Fe-Ni-Co). In this paper, a comparative analysis of the samples obtained using commercial micron-sized WC powder and the samples obtained is carried out using nano-WC synthesized via the electric explosion of wire (EEW) method. The samples were subjected to vacuum sintering, then their structure, density, and porosity, as well as microhardness and oxidation resistance, were studied. Five different additives were used to stabilize sintering: VC, Cr3C2, NbC, Y2O3, and Nd2O3. All these additives are described in the literature as additives that are used in the sintering of materials of the WC-Co system. Also, the samples from the WC-Fe-Ni-Co material were obtained using additive manufacturing technology with material extrusion. Bending strength and hardness of the additively fabricated samples were determined. [ABSTRACT FROM AUTHOR]

Optical waveguides create interesting opportunities in the area of soft sensing and electronic skins due to their potential for high flexibility, quick response time, and compactness. The loss or change of light intensities inside a waveguide can be measured and converted into useful sensing feedback such as strain or shape sensing. Compared to other approaches such as those based on microelectromechanical system modules or flexible conductors, the entire sensor state can be characterized by fewer sensing nodes and less encumbering wiring, allowing greater scalability. Herein, simple light‐emitting diodes (LEDs) and photodetectors (PDs) combined with an intelligent shape decoding framework are utilized to enable 3D shape sensing of a self‐contained flexible substrate. Multiphysics finite element analysis is leveraged to optimize the PDs/LEDs layout and enrich ground‐truth data from sparse to dense points for model training. The mapping from light intensities to overall sensor shape is achieved with an autoregression‐based model that considers temporal continuity and spatial locality. The sensing framework is evaluated on an A5‐sized flexible sensor prototype and a fish‐shaped prototype, where sensing accuracy (RMSE = 0.27 mm) and repeatability (Δ light intensity <0.31% over 1000 cycles) are tested underwater. [ABSTRACT FROM AUTHOR]

We investigated an electromagnetically induced transparency metamaterial and provided a comprehensive demonstration of its tunable electromagnetic characteristics in the terahertz region. Within a unit cell, a pair of horizontally aligned metal wires induces electric resonance, functioning as bright mode resonators. Additionally, a hybrid structure composed of metal and vanadium dioxide is employed to generate toroidal resonance, serving as dark mode resonators. Analysis of the scattered power reveals an enhancement of the energy associated with toroidal resonance within the transparent window. Simulation results illustrate a gradual reduction in the coupling strength of the electromagnetically induced transparency effect, and the transparency peak shifts toward the lower frequency range with decreasing conductivity of vanadium dioxide. Ultimately, the electromagnetically induced transparency phenomenon dissipates, resulting in a transmission spectrum characterized by a resonance curve. Theoretical analysis based on a two-coupled oscillator model unveils that the tunable effect of the electromagnetically induced transparency metamaterial is attributed to the modulation of damping rate and intrinsic resonant frequency of the dark mode resonator, achieved through adjustments in the conductivity of vanadium dioxide. This proposed approach holds promise for enhancing electromagnetically induced transparency implementations and expanding the application domains of toroidal metamaterials. [ABSTRACT FROM AUTHOR]

The present retrospective study has been carried out to find the occurrence of deaths due to electrocution in Eastern part of Bengaluru with special emphasis on finding out the conditions along with pattern of injuries sustained by the victims. Medico legal autopsy cases with history of electrocution over period of three years between January 2019 to December 2021 were included in this study. A total of 799 cases were autopsied at our Institute during that period, out of which 51 deaths (6.38%) were deaths due to electrocution, in which male's outnumbered females. The highest number of cases were observed in the age group of 21-30 years (n=18, 35.3%). 27 victims (52.9%) were electrocuted by low tensions domestic supply. Majority of the victims (n=31, 60.8%) died on the spot. Most cases (n=38, 74.5%) were reported during the daytime between 7 am and 7 pm. The incidence of deaths during rainy season were typically higher (n=29, 56.9%). Limbs were the most common body parts affected by electrocution (n=27, 52.9%). 37 (72.5%) victims were electrocuted in dry conditions according to the surrounding places of incidence. As per police documents and history by relatives all cases of the electrocution deaths in the present series were accidental in nature. The hazard of getting electrocuted in domestic surroundings from the chaotically connected electric wires without correct maintenance is certainly a matter of worry. Implementation of correct insulation safety procedures are important factors required for prevention of fatal electrocution. [ABSTRACT FROM AUTHOR]

Efficiently manipulating objects in a group state poses an emerging challenge for soft robot hands. Overcoming this problem necessitates the development of hands with highly stable structures to bear heavy loads and highly compliant designs to universally adapt to various object geometries. This study introduces a novel platform for the development of robot hands aimed at manipulating multiple objects in each trial. In this setup, the objects come into soft contact with an elastic wire affixed to the finger skeletons. This combination results in a harmonious hybrid finger, inheriting both the soft, flexible properties of the wire and the robust stability provided by the finger skeleton. To facilitate this approach, a theoretical model was proposed to estimate the kinematics of manipulating multiple objects using wiring-based fingers. Based on this model, we designed a hybrid gripper comprising two wiring-based fingers for conducting experimental evaluations in manipulating four groups of samples: a pair of bevel gears, a pair of bevel gears plus a pneumatic connector, a pair of glue bottles, and a pair of silicon bottles. The experimental results demonstrated that our proposed gripper reached good performance with high success rates in durability tests conducted at various lifting velocities and high adaption with objects in soft-friendly ways. These findings hold promise for efficiently manipulating multiple complex objects in each trial without the need for complex control systems. [ABSTRACT FROM AUTHOR]

Wire Arc Additive Manufacturing (WAAM) is a metallic additive manufacturing process based on the fusion of metallic wires using an electric arc as a heat source. The challenge associated with WAAM is heat management and understanding bead geometry. All of the process variables, such as travel speed (TS), wire feed speed (WFS), idle time, combine to produce the geometry of the deposited bead that results in the desired component shape. Therefore, determining a method for selecting a good combination of process parameters is critical to obtain a high-quality part. This article presents a study on how to control the WAAM process to produce a thick part of aluminium alloys. An experimental design is determined to study the influence between various process parameters such as WFS, TS, the layer height, or the length of the bead. Different samples are made using a Yaskawa robot, and the classic CMT (Cold Metal Transfer) mode as a manufacturing method. A new manufacturing method is then proposed by adding an important step in the process parameters determination. The results indicate that the length of the bead has a significant impact on the torch speed of the process. [ABSTRACT FROM AUTHOR]

Micro-tools comprising difficult-to-machine materials have seen widespread application in micro-manufacturing to satisfy the demands of micro-part processing and micro-device development. Taking micro-shafts as an example, the related developmental technology, based on wire electric discharge grinding (WEDG) as the core method, is one of the key technologies used to prepare high-precision micro-shafts. To enable efficient and high-precision machining of micro-shafts with target diameters, instead of performing multiple repeated on-machine measurements and reprocessing, a geometric constraint strategy is proposed based on the previously introduced twin-mirroring-wire tangential feed electrical discharge grinding (TMTF-WEDG). This strategy encompasses the tool setting method, tangential feed distance compensation, and an equation that establishes the relationship between tangential distance and diameter variation. These components are derived from a key points analysis of the geometric constraints. The micro-shafts with diameters of 50 µm and consistencies of ±1.5 µm are repeatedly processed. A series of micro-shafts with diameters ranging from 30 µm to 120 µm achieve geometric constraints with a diameter accuracy of ±2 µm, accompanied by the complete continuous automation of the entire process. Accordingly, it can be concluded that the geometric constraint strategy is flexible and stable and can be controlled with high precision in the TMTF-WEDG process. [ABSTRACT FROM AUTHOR]

Form-cutting tools are an economical choice for turning parts with defined profiles in mass production. The effects of the form contour of these tools—produced by the wire electrical discharge machining (WEDM) process—on tool quality were investigated in this research. This study focuses on reducing the adverse effects of the recast layer induced by WEDM on form-cutting tools. The basic component types of profile forms in form-cutting tools can be summarized by a combination of four modes, i.e., concave and convex arcs and flat and oblique surfaces. Hence, sample cutting tools with three different radii of convex and concave arcs and a flat surface were produced. During the WEDM operation, one-pass mode was used for roughing, two passes for semi-finishing, and three passes for finishing. Furthermore, the difference between the percentage of oxygen and carbon elements on the recast layer in the two areas above the workpiece or wire entry point and the bottom area of the workpiece or wire exit point was investigated. Finally, the influences of the direction, size of the curvature, and the number of passes in the wire electric discharge process on the recast layer were analyzed. It was observed that the recast layer thickness could be reduced by increasing the number of WEDM process. Additionally, the uniformity of the cutting contour was superior in the entry region of the wire going into the workpiece compared with the exit region of the wire. [ABSTRACT FROM AUTHOR]

In tunnel construction, hazardous water structures pose significant risks. The transient electromagnetic method (TEM) is widely used for advanced geological prediction due to its sensitivity to conductive targets. Currently, loop sources are generally used to detect these structures, but the space in the tunnel limits the magnetic moment and detection distance. This article proposes using an electric wire source TEM configuration on the tunnel sidewall for lateral exploration. The feasibility of this configuration is preliminarily analyzed using 3D numerical simulations based on tensor grids. The simulations include the six electromagnetic components under the axial electric source and the effects of offset, tunnel spatial conductivity, and tunnel size on the response. The results show that the inline electric field component and the vertical-induced electromotive force component are more sensitive to the target body in this configuration. We also found that when there is a small difference in resistivity between the target body and the surrounding rock, the sensitivity of the induced electromotive force z-component to the abnormal body will be reduced. When the distance between the source and the receiver is large, the broadside-induced electromotive force component can also be used to identify anomalous body electrical properties. Moreover, the conductivity and size of the tunnel have a certain impact on the detection results. In the next research, it is necessary to select more suitable model parameters for numerical simulations based on the actual conditions. [ABSTRACT FROM AUTHOR]

Simple Summary: Deforestation is increasingly forcing primates into proximity with people. It is vitally important, especially for globally threatened species, that we understand how species navigate human-dominated environments and if these interactions incur threats to their populations. Local knowledge is a valuable source of information on underrepresented and cryptic species, and studies relating to nocturnal species are limited in Thailand, including those of the Endangered slow lorises (Nycticebus bengalensis and N. coucang). Here, we analyze data regarding the knowledge, beliefs, and experiences of local people from Khao Lak, in southern Thailand, an area that is composed of rural and urban areas. We conducted 36 interviews using photo cards to determine (1) where and how often people see slow lorises, (2) what they see them doing, and (3) what they know about them. We analyzed meaningful common words and how they clustered together. We identified 11 key concepts that define the local beliefs about slow lorises. We found that people believed that slow lorises ate fruit, were not aggressive, but were "bad omens"; they also reported that there used to be more lorises, but the interviewees did not specify how recently. We also determined that slow lorises were often seen in rural and urban areas and we posit that the people of Khao Lak live in passive coexistence with lorises with minimal conflict and exploitation. Lastly, we determined that electrocutions and road accidents are the principal threats to slow lorises in Khao Lak. We discuss how local knowledge can be a vital first step in developing conservation action plans for the species. Natural landscapes are being converted for agriculture and other human uses across Asia and this development presents potential threats for specialist species of primates, like the Endangered slow lorises of Thailand (Nycticebus bengalensis and N. coucang). It is crucial to understand the interface between humans and slow lorises in order to conserve these primates. Local ecological knowledge provides valuable information about these cryptic nocturnal species. We conducted 36 semi-structured interviews in Khao Lak, in southern Thailand, asking (1) where slow lorises were seen, (2) what they were doing, (3) how often people see slow lorises, and (4) what people knew about them. We converted the interviews to free lists and determined the importance of key words. Our results show that the informants saw lorises frequently in six general locations: forests/trees (58%), electric wires (47%), towns/villages (36%), plantations (33%), homesteads (28%), and roads (17%). The most prominent places were forests/trees, wires, and plantations. Eleven key concepts defined local beliefs, with the most prominent being that lorises are awake at night (69%), eat fruit (42%), are not aggressive (25%), are bad omens (25%), and there used to be more of them (25%). Due to a minimal presence of persecution or exploitation of slow lorises by humans in the study area and general tolerance in the face of competition for the same resources and spaces, we suggest that, despite extensive persecution for the illegal photo prop trade in nearby Phuket, the people of Khao Lak seem to live in a state of passive coexistence with slow lorises. However, we did find some evidence that the pet and photo prop trade are still present in the area. It is crucial that coexistence be struck within the context of deforestation and urbanization so that conservation initiatives can take place within the community to further improve the lives of humans and the status of lorises. [ABSTRACT FROM AUTHOR]

Hastelloy-X is one of the wrought nickel-base superalloy comprising of oxidation resistance and high-temperature strength. Wire electric discharge machining process is the favoured technique for precise component fabrication of such materials. Apart from precision the most essential aspect with surface integrity and cutting velocity in manufacturing. This investigation deals with the effects of cutting speed override, corner dwell time, wire guide distance and wire offset on taper profile response characteristics. The variation of these parameters is studied by machining a simple square profile at 0°, 15° and 30° taper angles. It is observed that as the taper angle gets increased, both the machined errors at corners and machined roughness increased although the machining speed gets reduced. The recast layer and micro-hardness are explored for the taper square profile components. It is observed that the recast layer thickness was least for 30° taper profiles indicating least thermal degradation which was validated by micro-hardness. It was established that in a machined profile, that corners possessed lower hardness than the edges. The micro-hardness of inner profile corners was found to be lower than outer profile corners. Adaptive neuro-fuzzy interference system is better prediction computing method having least error ranging from 0–4.89%. In conclusion, the machining speed and taper angle also contribute to the output characteristics in wire electric discharge taper profiling. [ABSTRACT FROM AUTHOR]

Optical-electrode (optrode) arrays use light to modulate excitable biological tissues and/or transduce bioelectrical signals into the optical domain. Light offers several advantages over electrical wiring, including the ability to encode multiple data channels within a single beam. This approach is at the forefront of innovation aimed at increasing spatial resolution and channel count in multichannel electrophysiology systems. This review presents an overview of devices and material systems that utilize light for electrophysiology recording and stimulation. The work focuses on the current and emerging methods and their applications, and provides a detailed discussion of the design and fabrication of flexible arrayed devices. Optrode arrays feature components non-existent in conventional multi-electrode arrays, such as waveguides, optical circuitry, light-emitting diodes, and optoelectronic and light-sensitive functional materials, packaged in planar, penetrating, or endoscopic forms. Often these are combined with dielectric and conductive structures and, less frequently, with multi-functional sensors. While creating flexible optrode arrays is feasible and necessary to minimize tissue–device mechanical mismatch, key factors must be considered for regulatory approval and clinical use. These include the biocompatibility of optical and photonic components. Additionally, material selection should match the operating wavelength of the specific electrophysiology application, minimizing light scattering and optical losses under physiologically induced stresses and strains. Flexible and soft variants of traditionally rigid photonic circuitry for passive optical multiplexing should be developed to advance the field. We evaluate fabrication techniques against these requirements. We foresee a future whereby established telecommunications techniques are engineered into flexible optrode arrays to enable unprecedented large-scale high-resolution electrophysiology systems. [ABSTRACT FROM AUTHOR]

Copyright of Journal of the Japan Association for College of Technology is the property of Japan Association for College of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: Displaced olecranon fractures with a stable elbow joint are classified as Mayo type 2a or 2b and are commonly operated with tension band wiring, i.e. two K-wires and a cerclage. Retrospective studies have reported fewer reoperations and complications with cerclage fixation alone when compared to tension band wiring, though with similar long-term results. We decided to compare tension band wiring to cerclage fixation of displaced, stable olecranon fractures in adults in a randomized controlled trial. Methods: All patients ≥ 18 years old with Mayo type 2a and 2b fractures presenting at Skåne University hospital will be eligible for study inclusion, unless exclusion criteria are met. Two hundred participants will be included and randomized 1:1 to cerclage fixation or tension band wiring. Outpatient physiotherapist follow-up appointments will be scheduled at 2 and 6 weeks and at 3, 12, and 36 months at the Dept. of Orthopaedics. A lateral view radiograph of the elbow will be analysed at 6 months. The primary outcome of our study is the rate of reoperations. Secondary outcomes are complication rates, severity of complications, and patient-reported outcome measures (QuickDASH, Short Musculoskeletal Function Assessment, pain level, and patient satisfaction). The sample size was calculated to give 80% power for detecting a statistically significant difference in reoperation rates (with alpha-value 0.05), based on a previous retrospective study. Discussion: Reoperation and complication rates after tension band wiring of olecranon fractures are high. Treatment of these injuries is debated, and several ongoing trials compare tension band wiring with plate fixation, suture fixation, and non-operative treatment. As data from retrospective studies indicate that cerclage fixation may be superior to tension band wiring, we see a need for a randomized controlled trial comparing these methods. The WOW-OK Trial aims to obtain level-1 evidence that may influence treatment choice for this type of fracture. Trial registration: ClinicalTrials.gov NCT05657899. Registered on 16 November 2022. The trial complies with SPIRIT and CONSORT guidelines. The SPIRIT figure is found in Table 2. [ABSTRACT FROM AUTHOR]

The deposition energy and the peak overpressure of shockwaves are the leading engineering parameters of wire electric explosion technology applied to enhance oil recovery. The thicker Cu wire deposits more energy, which transforms into the shockwave efficiently. Therefore, the effects of three diameters (0.3, 0.4, and 0.5 mm) and hollow ratios (0, 0.5, and 0.7) on the electric explosion efficiency were studied by collecting pulse current, explosion products, and shockwaves during the test. All spatial structure designs of the wire depend on the skin effect parameters of the pulse discharge current. The results found that the peak overpressure of the shockwave soars with the increase of the hollow ratios when the diameter is constant. The range of the peak overpressure is 25.2~47.7 MPa. However, the correlation between shockwave and wire diameter changes from negative to positive with the increase of the hollow ratio from 0 to 0.7. The phase distribution deduced by the particle morphology and quantity distribution indicates that it is going to be uniform gradually with the hollow ratio rising from 0 to 0.7. When the extreme simplification is carried out without considering the magnetic diffusion process, it is indicated that the distribution of temperature and phase states along the wire radial is a Bessel function depending on the skin effect of the current density when three times the theoretical enthalpy drives the Cu wire. It means that the desired shockwave could be obtained efficiently by increasing the diameter and the hollow ratio of wire during a wire electric explosion. [ABSTRACT FROM AUTHOR]

This paper reports the analysis of studies on the use of secondary copper for the production of articles based on it, namely the contact wire for electric transport. The effect of the drawing step on the macro- and microstructure and physical and mechanical properties of the copper wire was studied. The optimal draw pitch for continuous copper cast- ing is 8.2 mm. At a temperature of the melt (cast- ing) of 1200 °C and a draw step of 8.2 mm, the average crystallization rate is ~300 °C/s. This provides sufficient time for crystallization, and with such parameters, the heat transfer from the metal receiver does not have a noticeable effect on the structure. At the same time, it was estab- lished that Mg is a modifier for liquid Cu while all other elements do not have such an effect and form solid solutions with copper. It is shown that the increase in the concen- tration of silver from 0.082 at% to 0.092 at% led to an increase in specific electrical resis- tance by 0.582 %. As for other elements, name- ly, iron, the change in its amount from 0.002 at% to 0.005 at% increased the specific resistance of copper by 1.733 %. The change in nickel con- centration from 0.024 at% to 0.036 at% and tin from 0.0010 at% to 0.0035 at% led to its growth by 2.927 % and 1.269 %, respectively. [ABSTRACT FROM AUTHOR]

In this paper, the effect of different forms of electric heating wire forms on the anti-icing performance of the refrigerated container was studied based on numerical simulation. The heat transfer and the thermal conductivity of the refrigerated container door wall, and the uniformity of air-flow distribution in the refrigerated container are analyzed. The heating wire form 2 has the best anti-icing performance and meets the anti-icing requirement when the thermal conductivity is from 0.005-0.01 W/mK. The electric heating wires nearest to the inner wall surface is the optimal anti-icing solution. The spare electric heating wires placement can be determined according to the thickness of the refrigerated container door. The specific lay-out of electric heating wires in the future can be further optimized in combination with carbon emissions. [ABSTRACT FROM AUTHOR]