Search

Response surface methodology (RSM) was used to optimize present in considerable concentrations in olive oil mill wastewaters. The variables studied were solvant ratio (τ), salinity (S) and medium acidity (pH) and were carried out using central composite design. The results of experimental showed that the ratio of solvent (τ), was the most significant parameters on the extraction yield. Although this experimental design showed that the values of pH at the range 2 did not have a significant role in yield extraction, the 2³ fractional design revealed that the highest selectivity extraction of pyrocatechol is reached when salinity (S) and solvent ratio (τ), values were higher. [ABSTRACT FROM AUTHOR]

The increasing interest in lignin, a complex and abundant biopolymer, stems from its ability to produce environmentally beneficial biobased products. β-Etherases play a crucial role by breaking down the β-aryl ether bonds in lignin. This comprehensive review covers the latest advancements in β-etherase-mediated lignin valorization, focusing on substrate selectivity, enzymatic oxidative activity, and engineering methods. Research on the microbial origin, protein modification, and molecular structure determination of β-etherases has improved our understanding of their effectiveness. Furthermore, the use of these enzymes in biorefinery processes is promising for enhancing lignin breakdown and creating more valuable products. The review also discusses the challenges and future potential of β-etherases in advancing lignin valorization for biorefinery applications that are economically viable and environmentally sustainable., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A theoretical study of monolayer boron phosphorous nitride (B 2 PN) is performed to explore its electronic and thermoelectric properties. The thermodynamic stability is determined by the formation energy of a monolayer. The dynamic stability is obtained from the phonon dispersion curve. We performed an AMID simulation to ensure the thermal stability and found that our material is thermally stable at 700 K. The system possesses direct band gaps of 0.25 eV and 0.4 eV with Perdew-Burke-Ernzerhof (PBE) and hybrid functional (HSE), respectively. The Seebeck coefficient is found to be the same in both directions, and the maximum value is 1.55 mV K -1 . The relaxation time is found to be longer for the hole-doped system than the electron-doped system. It is observed that electrical conductivity is greater for hole-doped system in both directions, and a similar trend is observed for electronic thermal conductivity. We found that the lattice thermal conductivity of our systems is anisotropic. The lattice thermal conductivity along the Y -direction is greater than that in the X -direction. The calculation performed for the figure of merit ( ZT ) reveals that the system has a high ZT of 1.14 for a hole-doped system. The figure of merit makes the system a promising candidate for potential thermoelectric device applications., Competing Interests: The authors declare no conflicting of interest., (This journal is © The Royal Society of Chemistry.)

This study introduces a pH-responsive hydrogel developed from Delonix regia and mucin co-poly(acrylate) through free radical polymerization to enhance controlled drug delivery systems. Characterization using FTIR, DSC, TGA, SEM, PXRD, and EDX spectroscopy detailed the hydrogel's amorphous and crystalline structures, thermal stability, surface characteristics, and elemental composition. Tested at a pH of 7.4-mimicking intestinal conditions-the hydrogel demonstrated significant swelling, indicating its capability for targeted drug release. With Metformin HCl as a model drug, the hydrogel exhibited a promising sustained release profile, underscoring its potential for oral administration. Safety and biocompatibility were assessed through acute oral toxicity studies in albino rabbits, encompassing biochemical, hematological, and histopathological evaluations. X-ray imaging confirmed the hydrogel's navigability through the gastrointestinal tract, affirming its application in drug delivery. By potentially mitigating gastrointestinal side effects, enhancing patient compliance, and improving therapeutic efficacy, this Delonix regia/mucin co-poly(acrylate) hydrogel represents a step in pharmaceutical sciences, exploring innovative materials and methodologies for drug delivery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

This research focused on developing pH-regulated intelligent networks using quince and mimosa seed mucilage through aqueous polymerization to sustain Capecitabine release while overcoming issues like short half-life, high dosing frequency, and low bioavailability. The resulting MSM/QSM-co-poly(MAA) hydrogel was evaluated for several parameters, including complex structure formation, stability, pH sensitivity, morphology, and elemental composition. FTIR, DSC, and TGA analyses confirmed the formation of a stable, complex cross-linked network, demonstrating excellent stability at elevated temperatures. SEM analysis revealed the hydrogels' smooth, fine texture with porous surfaces. PXRD and EDX results indicated the amorphous dispersion of Capecitabine within the network. The QMM9 formulation achieved an optimal Capecitabine loading of 87.17 %. The gel content of the developed formulations ranged from 65.21 % to 90.23 %. All formulations exhibited excellent swelling behavior, with ratios between 65.91 % and 91.93 % at alkaline pH. In vitro dissolution studies indicated that up to 98 % of Capecitabine was released after 24 h at pH 7.4, demonstrating the potential for sustained release. Furthermore, toxicological evaluation in healthy rabbits confirmed the system's safety, non-toxicity, and biocompatibility., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This review focuses on exploring the intricate relationship between the catalyst particle size and shape on a nanoscale level and how it affects the performance of reactions. Drawing from decades of research, valuable insights have been gained. Intentionally shaping catalyst particles makes exposing a more significant percentage of reactive facets possible, enabling the control of overactive sites. In this study, the effectiveness of Co 3 O 4 nanoparticles (NPs) with nanometric size as a catalyst is examined, with a particular emphasis on the coordination patterns between oxygen and cobalt atoms on the surface of these NPs. Investigating the correlation between the structure and reactivity of the exposed NPs reveals that the form of Co 3 O 4 with nanometric size can be modified to tune its catalytic capabilities finely. Morphology-dependent nanocatalysis is often attributed to the advantageous exposure of reactive crystal facets accumulating numerous active sites. However, experimental evidences highlight the importance of considering the reorganization of NPs throughout their actions and the potential synergistic effects between nearby reactive and less-active aspects. Despite the significant role played by the atomic structure of Co 3 O 4 NPs with nanometric size, limited attention has been given to this aspect due to challenges in high-resolution characterizations. To bridge this gap, this review strongly advocates for a comprehensive understanding of the relationship between the structure and reactivity through real-time observation of individual NPs during the operation. Proposed techniques enable the assessment of dimensions, configuration, and interfacial arrangement, along with the monitoring of structural alterations caused by fluctuating temperature and gaseous conditions. Integrating this live data with spectroscopic methods commonly employed in studying inactive catalysts holds the potential for an enhanced understanding of the fundamental active sites and the dynamic behavior exhibited in catalytic settings., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (This journal is © The Royal Society of Chemistry.)

Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

In this comprehensive investigation, we evaluate the efficacy of the Fenton process in degrading basic fuchsin (BF), a resistant dye. Our primary focus is on the utilization of readily available, environmentally benign, and cost-effective reagents for the degradation process. Furthermore, we delve into various operational parameters, including the quantity of sodium percarbonate (SPC), pH levels, and the dimensions of waste iron bars, to optimize the treatment efficiency. In the course of our research, we employed an initial SPC concentration of 0.5 mM, a pH level of 3, a waste iron bar measuring 3.5 cm in length and 0.4 cm in diameter, and a processing time of 10 min. Our findings reveal the successful elimination of the BF dye, even when subjected to treatment with diverse salts and surfactants under elevated temperatures and acidic conditions (pH below 3). This underscores the robustness of the Fenton process in purifying wastewater contaminated with dye compounds. The outcomes of our study not only demonstrate the efficiency of the Fenton process but highlight its adaptability to address dye contamination challenges across various industries. Critically, this research pioneers the application of waste iron bars as a source of iron in the Fenton reaction, introducing a novel, sustainable approach that enhances the environmental and economic viability of the process. This innovative use of recycled materials as catalysts represents a significant advancement in sustainable chemical engineering practices., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Weed communities influence the dynamics of ecosystems, particularly in disturbed environments where anthropogenic activities often result in higher pollution. Understanding the dynamics existing between native weed communities and invasive species in disturbed environments is crucial for effective management and normal ecosystem functioning. Recognising the potential resistance of native weed communities to invasion in disturbed environments can help identify suitable native plants for restoration operations. This review aims to investigate the adaptations exhibited by native and non-native weeds that may affect invasions within disturbed environments. Factors such as ecological characteristics, altered soil conditions, and adaptations of native weed communities that potentially confer a competitive advantage relative to non-native or invasive weeds in disturbed environments are analysed. Moreover, the roles of biotic interactions such as competition, mutualistic relationships, and allelopathy in shaping the invasion resistance of native weed communities are described. Emphasis is given to the consideration of the resistance of native weeds as a key factor in invasion dynamics that provides insights for conservation and restoration efforts in disturbed environments. Additionally, this review underscores the need for further research to unravel the underlying mechanisms and to devise targeted management strategies. These strategies aim to promote the resistance of native weed communities and mitigate the negative effects of invasive weed species in disturbed environments. By delving deeper into these insights, we can gain an understanding of the ecological dynamics within disturbed ecosystems and develop valuable insights for the management of invasive species, and to restore long-term ecosystem sustainability., (© 2024 Cambridge Philosophical Society.)

In this study, batch flotation tests were conducted to investigate the flotation of oxidized copper ore from the supergene zone of the Bounhas deposit. Utilizing the Response Surface Methodology (RSM) anchored on the Box-Behnken Design (BBD), the effects of parameters such as collector dosage, sulfidizing agent, copper oxide and iron oxide grades, and particle size on copper recovery were explored. ANOVA and response surface plots elucidated the complex behavior of copper flotation. Mineralogical analyses of the initial feed and postflotation tails were performed on an industrial scale using advanced Zeiss microscopy. The quadratic model with an R 2 of 94.49% accurately captured the impact of the process parameters on copper recovery. Among the key findings, the sulfidizing agent exhibited the most substantial quadratic effect, while the copper oxide grade had the most substantial linear impact on recovery. A pivotal observation was the link between copper losses in tailings and specific iron oxide-copper associations. Optimization identified conditions leading to a maximum copper recovery rate of 71.49%. When validated industrially, the model demonstrated robust applicability for analogous mineral processing contexts. The study's mineralogical insights enhance our understanding of the supergene zone mineralization and offer a solid foundation for subsequent in-depth mineral processing studies., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

In this comprehensive investigation, a novel pH-responsive hydrogel system comprising mimosa seed mucilage (MSM), β-cyclodextrin (β-CD), and methacrylic acid (MAA) was developed via free radical polymerization technique to promote controlled drug delivery. The hydrogel synthesis involved strategic variations in polymer, monomer, and crosslinker content in fine-tuning its drug-release properties. The resultant hydrogel exhibited remarkable pH sensitivity, selectively liberating the model drug (Capecitabine = CAP) under basic conditions while significantly reducing release in an acidic environment. Morphological, thermal, and structural analyses proved that CAP has a porous texture, high stability, and an amorphous nature. In vitro drug release experiments showcased a sustained and controlled release profile. Optimum release (85.33 %) results were recorded over 24 h at pH 7.4 in the case of MMB9. Pharmacokinetic evaluation in healthy male rabbits confirmed bioavailability enhancement and sustained release capabilities. Furthermore, rigorous toxicity evaluations and histopathological analyses ensured the safety and biocompatibility of the hydrogel. This pH-triggered drug delivery system can be a promising carrier system for drugs involving frequent administrations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

The performance of a Pelton wheel is influenced by the jet created by the nozzle. Therefore, a Computational Fluid Dynamics (CFD) simulation was proposed. In this study, the significant output parameters (outlet velocity, outlet pressure, and tangential force component) and input parameters (different pressure and spear locations) were examined. In addition, the influencing parameters and their contributing percentages to the performance of the Pelton wheel were calculated using different optimisation techniques such as Taguchi Design of Experiments (DoE), Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), Grey Relational Analysis (GRA) and Criteria Importance Through Intercriteria Correlation (CRITIC). The effect of input factors on the output response was examined with DoE, and the results show that the inlet pressure had the most significant impact (97.38%, 99.18%, and 97.38%, respectively, for all different spear sites with a 99% confidence level). In terms of preference values, the TOPSIS and GRA results are comparable (best ranks for simulation runs #24 and #25 and least ranks for simulations #2 and #3, respectively). The CRITIC results for the pressure parameter are in good agreement with the Taguchi ANOVA analysis. The last spear location (5 mm after the nozzle outlet), with an inlet pressure of 413685 Pa generated the best result when employing the TOPSIS and GRA techniques. The outlet pressure of the nozzle was found to have a significant impact on the flow pattern of the Pelton Wheel based on the analysis of the CRITIC, Taguchi, and CFD results., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 Published by Elsevier Ltd.)

Industrialization and population growth are leading to the production of significant amounts of sewage containing hazardous xenobiotic compounds. These compounds pose a threat to human and animal health, as well as the overall ecosystem. To combat this issue, chemical, physical, and biological techniques have been used to remove these contaminants from water bodies affected by human activity. Biotechnological methods have proven effective in utilizing microorganisms and enzymes, particularly laccases, to address this problem. Laccases possess versatile enzymatic characteristics and have shown promise in degrading different xenobiotic compounds found in municipal, industrial, and medical wastewater. Both free enzymes and crude enzyme extracts have demonstrated success in the biotransformation of these compounds. Despite these advancements, the widespread use of laccases for bioremediation and wastewater treatment faces challenges due to the complex composition, high salt concentration, and extreme pH often present in contaminated media. These factors negatively impact protein stability, recovery, and recycling processes, hindering their large-scale application. These issues can be addressed by focusing on large-scale production, resolving operation problems, and utilizing cutting-edge genetic and protein engineering techniques. Additionally, finding novel sources of laccases, understanding their biochemical properties, enhancing their catalytic activity and thermostability, and improving their production processes are crucial steps towards overcoming these limitations. By doing so, enzyme-based biological degradation processes can be improved, resulting in more efficient removal of xenobiotics from water systems. This review summarizes the latest research on bacterial laccases over the past decade. It covers the advancements in identifying their structures, characterizing their biochemical properties, exploring their modes of action, and discovering their potential applications in the biotransformation and bioremediation of xenobiotic pollutants commonly present in water sources., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Metal-organic framework (MOF)--based composites have received significant attention in a variety of applications, including pollutant adsorption processes. The current investigation was designed to model, forecast, and optimize heavy metal (Cu 2+ ) removal from wastewater using a MOF nanocomposite. This work has been modeled by response surface methodology (RSM) and artificial neural network (ANN) algorithms. In addition, the optimization of the mentioned factors has been performed through the RSM method to find the optimal conditions. The findings show that RSM and ANN can accurately forecast the adsorption process's the Cu 2+ removal efficiency (RE). The maximum values of RE are achieved at the highest value of time (150 min), the highest value of adsorbent dosage (0.008 g), and the highest value of pH (=6). The R 2 values obtained were 0.9995, 0.9992, and 0.9996 for ANN modeling of adsorption capacity based on different adsorbent dosages, Cu 2+ solution pHs, and different ion concentrations, respectively. The ANN demonstrated a high level of accuracy in predicting the local minima of the graph. In addition, the RSM optimization results showed that the optimum mode for RE occurred at an adsorbent dosage value of 0.007 g and a time value of 144.229 min., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Nylon-6,6 microplastics (NMPs) in aquatic systems have emerged as potential contaminants to the global environment and have garnered immense consideration over the years. Unfortunately, there is currently no efficient method available to eliminate NMPs from sewage. This study aims to address this issue by isolating Brucella intermedia ZL-06, a bacterium capable of producing a bacterial polysaccharide-based flocculant (PBF). The PBF generated from this bacterium shows promising efficacy in effectively flocculating NMPs. Subsequently, the precipitated flocs (NMPs + PBF) were utilized as sustainable feedstock for synthesizing PBF. The study yielded 6.91 g/L PBF under optimum conditions. Genome sequencing analysis was conducted to study the mechanisms of PBF synthesis and nylon-6,6 degradation. The PBF exhibited impressive flocculating capacity of 90.1 mg/g of PBF when applied to 0.01 mm NMPs, aided by the presence of Ca 2+ . FTIR and XPS analysis showed the presence of hydroxyl, carboxyl, and amine groups in PBF. The flocculation performance of PBF conformed to Langmuir isotherm and pseudo-first-order adsorption kinetics model. These findings present a promising approach for reducing the production costs of PBF by utilizing NMPs as sustainable nutrient sources., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Lignin and Casparian strips are two essential components of plant cells that play critical roles in plant development regulate nutrients and water across the plants cell. Recent studies have extensively investigated lignin diversity and Casparian strip formation, providing valuable insights into plant physiology. This review presents the established lignin biosynthesis pathway, as well as the developmental patterns of lignin and Casparian strip and transcriptional network associated with Casparian strip formation. It describes the biochemical and genetic mechanisms that regulate lignin biosynthesis and deposition in different plants cell types and tissues. Additionally, the review highlights recent studies that have uncovered novel lignin biosynthesis genes and enzymatic pathways, expanding our understanding of lignin diversity. This review also discusses the developmental patterns of Casparian strip in roots and their role in regulating nutrient and water transport, focusing on recent genetic and molecular studies that have identified regulators of Casparian strip formation. Previous research has shown that lignin biosynthesis genes also play a role in Casparian strip formation, suggesting that these processes are interconnected. In conclusion, this comprehensive overview provides insights into the developmental patterns of lignin diversity and Casparian strip as apoplastic barriers. It also identifies future research directions, including the functional characterization of novel lignin biosynthesis genes and the identification of additional regulators of Casparian strip formation. Overall, this review enhances our understanding of the complex and interconnected processes that drive plant growth, pathogen defense, regulation and development., Competing Interests: Declaration of competing interest The authors have no conflict of interest to declare., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The practice of aquaculture is associated with the generation of a substantial quantity of effluent. Microalgae must effectively assimilate nitrogen and phosphorus from their surrounding environment for growth. This study modeled the algal biomass film, NO 3 -N concentration, and pH in the membrane bioreactor using the response surface methodology (RSM) and an artificial neural network (ANN). Furthermore, it was suggested that the optimal condition for each parameter be determined. The results of ANN modeling showed that ANN with a structure of 5-3 and employing the transfer functions tansig-logsig demonstrated the highest level of accuracy. This was evidenced by the obtained values of coefficient (R 2 ) = 0.998, R = 0.999, mean squared error (MAE) = 0.0856, and mean square error (MSE) = 0.143. The ANN model, characterized by a 5-5 structure and employing the tansig-logsig transfer function, demonstrates superior accuracy when predicting the concentration of NO 3 -N and pH. This is evidenced by the high values of R 2 (0.996), R (0.998), MAE (0.00162), and MSE (0.0262). The RSM was afterward employed to maximize the performance of algal film biomass, pH levels, and NO 3 -N concentrations. The optimal conditions for the algal biomass film were a concentration of 2.884 mg/L and a duration of 6.589 days. Similarly, the most favorable conditions for the NO 3 -N concentration and pH were 2.984 mg/L and 6.787 days, respectively. Therefore, this research uses non-dominated sorting genetic algorithm II (NSGA II) to find the optimal NO3-N concentration, algal biomass film, and pH for product or process quality. The region has the greatest alkaline pH and lowest NO 3 -N content., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

This study investigates the efficacy of adsorbents from locally sourced olive waste-encompassing olive skins, leaves, and pits, recovered from the initial centrifugation of olives (OWP)-and a composite with sodium alginate (OWPSA) for the removal of Cu 2+ ions from synthetic wastewater. Experimental analyses conducted at room temperature, with an initial Cu 2+ concentration of 50 mg/L and a solid/liquid ratio of 1 g/L, showed that the removal efficiencies were approximately 79.54% and 94.54% for OWP and OWPSA, respectively, highlighting the positive impact of alginate on adsorption capacity. Utilizing statistical physics isotherm models, particularly the single-layer model coupled to real gas (SLMRG), allowed us to robustly fit the experimental data, providing insights into the adsorption mechanisms. Thermodynamic parameters affirmed the spontaneity and endothermic nature of the processes. Adsorption kinetics were interpreted effectively using the pseudo-second-order (PSO) model. Molecular modeling investigations, including the conductor-like screening model for real solvents (COSMO-RS), density functional theory (DFT), and atom-in-molecule (AIM) analysis, unveiled intricate molecular interactions among the adsorbent components-cellulose, hemicellulose, lignin, and alginate-and the pollutant Cu 2+ , confirming their physically interactive nature. These findings emphasize the synergistic application of experimental and theoretical approaches, providing a comprehensive understanding of copper adsorption dynamics at the molecular level. This methodology holds promise for unraveling intricate processes across various adsorbent materials in wastewater treatment applications.

The primary goal of this experiment is to examine the effectiveness of Pseudomonas aeruginosa strain PAR as a rhizobacterium that promotes plant growth in mitigating the negative effects of fluoride-induced stress in tomato ( Lycopersicon esculentum Mill.) plants. A total of 16 rhizobacterial strains were tested for plant growth-promoting (PGP) attributes, with isolates S1, S2, and S3 exhibiting different characteristics. Furthermore, growth kinetics studies revealed that these isolates were resilient to fluoride stress (10, 20, 40, and 80 ppm), with isolate S2 exhibiting notable resilience compared to the other two strains. Phylogenetic analysis revealed isolate S2 as P. aeruginosa strain PAR. Physiological analyses demonstrated that P. aeruginosa strain PAR had a beneficial impact on plant properties under fluoride stress, comprising seed germination, root length, shoot height, relative water content, and leaf area, the strain also impacted the buildup of glycine betaine, soluble sugar, and proline, demonstrating its significance in enhancing plant stress tolerance. In P. aeruginosa strain PAR-treated plants, chlorophyll content increased while malondialdehyde (MDA) levels decreased, indicating enhanced photosynthetic efficiency and less oxidative stress. The strain modified antioxidant enzyme action (catalase, ascorbate, glutathione reductase, peroxidase, and superoxide dismutase), which contributed to improved stress resilience. Mineral analysis revealed a decrease in sodium and fluoride concentrations while increasing magnesium, potassium, phosphorus, and iron levels, emphasizing the strain's significance in nutrient management. Correlation and principal component analysis revealed extensive correlations between physiological and biochemical parameters, underscoring P. aeruginosa strain PAR's multifaceted impact on plant growth and stress response. This study offers valuable information on effectively utilizing PGPR, particularly P. aeruginosa strain PAR, in fluoride-contaminated soils for sustainable agriculture. It presents a promising biological strategy to enhance crop resilience and productivity., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Singh, Patani, Patel, Vyas, Verma, Amari, Osman, Rathod, Elboughdiri, Yadav, Sahoo, Chundawat and Patel.)

This research describes the fabrication of the porous trimethylamine (TMA)-grafted anion exchange membrane (AEM) over a phase inversion process. The synthesis of the generated AEM was verified using Fourier transform infrared (FTIR) spectroscopy. The fabricated porous AEM showed 240% water uptake (W R ), 1.45 mg/g ion exchange capacity (IEC), and a 9.0% linear expansion ratio (LER) at 25 °C. It exhibited a porous structure and higher thermal stability. It was utilized to remove eosin B (EB) from wastewater via the process of adsorption. The adsorption capacity of EB increased with time and the starting concentration of EB while decreasing with temperature and the AEM dosage. Adsorption isotherm investigation results showed that EB adsorption onto the porous AEM followed the Langmuir isotherm because the value of correlation coefficient ( R 2 = 0.992) was close to unity. Because the correlation coefficient was close to one, it was determined through adsorption kinetic experiments that the adsorption of EB on the produced porous AEM was suitable for a pseudo-second-order model. Thermodynamic study about process of EB adsorption on the porous AEM revealed that there was an exothermic (Δ H ° = -16.60 kJ/mol) and spontaneous process., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Oral medications are prone to gastric degradation and enzymatic inactivation, diminishing their efficacy. This study investigates a solution by developing intelligent polymeric networks, incorporating chitosan, methacrylic acid, N, N, methylene bisacrylamide, and montmorillonite clay, to enable the controlled release of Diloxanide Furoate (DF), an anti-protozoal drug. Employing a swelling-assisted diffusion technique, drug loading percentages varied from 63.96 % to 76.82 % among different formulations. Increased chitosan and methacrylic acid content enhanced drug loading, while N, N, methylene bisacrylamide and montmorillonite clay demonstrated an inverse relationship affecting diffusion and swelling. Equilibrium swelling studies unveiled formulation-dependent behaviors, with chitosan reducing swelling and methacrylic acid promoting it. Higher N, N, methylene bisacrylamide concentrations decreased swelling, indicating a denser cross-linked structure, while montmorillonite clay reduced hydrophilicity and swelling capacity. Further analyses confirmed successful gel formation, particularly in formulations with higher chitosan, methacrylic acid, and N, N, methylene bisacrylamide content, while montmorillonite clay limited gel fraction due to restricted polymer chain mobility. Techniques such as Fourier transform infrared spectroscopy, Differential scanning calorimetry, and thermal gravimetric analyses supported network development, enhancing thermal stability and cross-linking density. This research underscores the flexibility of polymeric networks for precise drug delivery, offering potential advancements in targeted therapies for various medical conditions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

This review delves into the mesmerizing technology of nano-agrochemicals, specifically pesticides and herbicides, and their potential to aid in the achievement of UN SDG 17, which aims to reduce hunger and poverty globally. The global market for conventional pesticides and herbicides is expected to reach USD 82.9 billion by 2027, growing 2.7% annually, with North America, Europe, and the Asia-Pacific region being the biggest markets. However, the extensive use of chemical pesticides has proven adverse effects on human health as well as the ecosystem. Therefore, the efficacy, mechanisms, and environmental impacts of conventional pesticides require sustainable alternatives for effective pest management. Undoubtedly, nano-agrochemicals have the potential to completely transform agriculture by increasing crop yields with reduced environmental contamination. The present review discusses the effectiveness and environmental impact of nanopesticides as promising strategies for sustainable agriculture. It provides a concise overview of green nano-agrochemical synthesis and agricultural applications, and the efficacy of nano-agrochemicals against pests including insects and weeds. Nano-agrochemical pesticides are investigated due to their unique size and exceptional performance advantages over conventional ones. Here, we have focused on the environmental risks and current state of nano-agrochemicals, emphasizing the need for further investigations. The review also draws the attention of agriculturists and stakeholders to the current trends of nanomaterial use in agriculture especially for reducing plant diseases and pests. A discussion of the pros and cons of nano-agrochemicals is paramount for their application in sustainable agriculture.

A magnetic nanocomposite of tungsten and vanadium was employed as a catalyst for the mitigation of water contaminants, including a carcinogenic dye (Congo red, CR), a widely used pesticide (glyphosate), and the bacterial strain Escherichia coli . Additionally, it was subjected to several characterization techniques. X-ray diffraction spectroscopy examination validated the synthesized nanoparticles' crystalline nature, and scanning electron microscopy and energy-dispersive X-ray analysis were employed to examine the morphology and elemental composition of the catalyst. The use of thermogravimetric analysis enabled the elaboration of the thermal behavior of tungsten sulfide-vanadium decorated with Fe 2 O 3 nanoparticles. The experiments were conducted under visible light conditions. The highest levels of photodegradation of 96.24 ± 2.5% for CR and 98 ± 1.8% for glyphosate were observed following a 180 min exposure to visible light at pH values of 6 and 8, respectively. The quantum yields for CR and Gly were calculated to be 9.2 × 10 -3 and 4.9 × 10 -4 molecules photon -1 , respectively. The findings from the scavenger analysis suggest the involvement of hydroxyl radicals in the degradation mechanism. The study evaluated the inhibition of E. coli growth when exposed to a concentration of 0.1 g/10 mL of the photocatalyst, utilizing a 1 mL sample of the bacterial strain. The successful elimination of CR and glyphosate from water-based solutions, along with the subsequent antibacterial experiments, has substantiated the efficacy of the photocatalyst in the field of environmental remediation., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

We investigate the morphological, electrical, magnetic, and resistive switching properties of (Co, Yb) co-ZnO for neuromorphic computing. By using hydrothermal synthesized nanoparticles and their corresponding sputtering target, we introduce Co and Yb into the ZnO structure, leading to increased oxygen vacancies and grain volume, indicating grain growth. This growth reduces grain boundaries, enhancing electrical conductivity and room-temperature ferromagnetism in Co and Yb-doped ZnO nanoparticles. We present a sputter-grown memristor with a (Co, Yb) co-ZnO layer between Au electrodes. Characterization confirms the ZnO layer's presence and 100 nm-thick Au electrodes. The memristor exhibits repeatable analog resistance switching, allowing manipulation of conductance between low and high resistance states. Statistical endurance tests show stable resistive switching with minimal dispersion over 100 pulse cycles at room temperature. Retention properties of the current states are maintained for up to 1000 seconds, demonstrating excellent thermal stability. A physical model explains the switching mechanism, involving Au ion migration during "set" and filament disruption during "reset." Current-voltage curves suggest space-charge limited current, emphasizing conductive filament formation. All these results shows good electronic devices and systems towards neuromorphic computing., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have influenced the work reported in this paper., (This journal is © The Royal Society of Chemistry.)

This research investigates the long-term resilience of an environmentally friendly cement blend comprising Egyptian Ordinary Portland Cement OPC and Ground-Granulated Blast Furnace Slag GGBFS when exposed to a corrosive seawater environment. This scientific investigation explores the effects of exposure to seawater on various properties of cement pastes, encompassing parameters such as free lime content (FLC), chemically combined water content (CWC), bulk density (BD), total porosity (ϕ), total sulfate content, total chloride content, and compressive strength (CS). By contrast, Differential Thermal Analysis (DTA), FT-IR spectroscopy, and X-ray diffraction (XRD) analysis can be utilized to investigate the influence of exposure to seawater on the hydration products of GGBFS cement pastes over a period of up to one year. This analytical approach offers valuable insights into the alterations that occur in hydration products and their resilience when subjected to seawater conditions. The results obtained from this investigation reveal that all cement pastes incorporating GGBFS exhibit heightened resistance to deterioration in seawater, with slag cement containing 60 wt. % GGBFS and achieving a notable compressive strength of 85.7 Mpa after one year of immersion in seawater. These findings underscore the capacity of these cement blends to effectively withstand challenges in durability in marine environments.

Background and Purpose: The pandemic of COVID-19 has highlighted the need for managing infectious diseases, which spreads by airborne transmission leading to serious health, social, and economic issues. SARS-CoV-2 is an enveloped virus with a 60-140 nm diameter and particle-like features, which majorly accounts for this disease. Expanding diagnostic capabilities, developing safe vaccinations with long-lasting immunity, and formulating effective medications are the strategies to be investigated., Experimental Approach: For the literature search, electronic databases such as Scopus, Google Scholar, MEDLINE, Embase, PubMed, and Web of Science were used as the source. Search terms like 'Nano-mediated PDT,' 'PDT for SARS-CoV-2', and 'Nanotechnology in treatment for SARS-CoV-2' were used. Out of 275 initially selected articles, 198 were chosen after the abstract screening. During the full-text screening, 80 papers were excluded, and 18 were eliminated during data extraction. Preference was given to articles published from 2018 onwards, but a few older references were cited for their valuable information., Key Results: Synthetic nanoparticles (NPs) have a close structural resemblance to viruses and interact greatly with their proteins due to their similarities in the configurations. NPs had previously been reported to be effective against a variety of viruses. In this way, with nanoparticles, photodynamic therapy (PDT) can be a viable alternative to antibiotics in fighting against microbial infections. The protocol of PDT includes the activation of photosensitizers using specific light to destroy microorganisms in the presence of oxygen, treating several respiratory diseases., Conclusion: The use of PDT in treating COVID-19 requires intensive investigations, which has been reviewed in this manuscript, including a computational approach to formulating effective photosensitizers., Competing Interests: Conflict of interest: The authors declare that there is not any conflict of interest., (Copyright © 2023 by the authors.)

Cascade molecules are nearly uniform-sized macromolecules of small molecules or linear polymer cores built around symmetric branching units. A wide range of biological properties can be achieved with phosphorus-containing dendrimers, depending on their terminal functions, ranging from biomaterials to imaging, drug delivery, and acting as a drug by themselves. This feature article presents significant examples of phosphorus-containing dendrimers used to develop biochips, support cell cultures, carry or deliver biomacromolecules and drugs, bioimaging, and combinational benefits. Because of the thermal stability, ferrocene function, and physical and chemical properties of phosphorus, dendrimers show greater rigidity, mobility, and strength. These dendrimers will be discussed as having a favorable effect on cell growths, especially on neuronal cells, as well as human immune cells like natural killer cells and monocytes, which have a crucial part in preventing cancerous and viral infections. Several phosphorus dendrimers are effective as drugs by themselves (drug per se) and show their activity against neurodegenerative diseases, cancer, inflammation, ocular hypertension, and transmissible spongiform encephalopathies (TSEs) in both in vivo and in vitro. The present review discusses the synthetic route, fabrications, and biomedical applications of phosphorus-containing dendrimers. The toxicity of these dendrimers was also reported., Competing Interests: Conflict of interest: The authors declare that they have no conflict of interest., (© TÜBİTAK.)

The inhibitory activity of three prepared azo compounds derived from Schiff bases, namely, bis[5-(phenylazo)-2-hydroxybenzaldehyde]-4,4'-diaminophenylmethane (C1), bis[5-(4-methylphenylazo)-2-hydroxybenzaldehyde]-4,4'-diaminophenylmethane (C2), and bis[5-(4-bromophenylazo)-2-hydroxybenzaldehyde]-4,4'-diaminophenylmethane (C3), against corrosion of steel type XC70 in (HCl, 1 M DMSO) medium was investigated experimentally by electrochemical measurements and theoretically using density functional theory (DFT). The correlation between corrosion inhibition and concentration is direct. The maximum inhibition efficiency at 6 × 10 -5 M for the three azo compounds derived from Schiff bases was 64.37, 87.27, and 55.47% for C1, C2, and C3, respectively. The Tafel curves indicate that the inhibitors follow a mixed but predominantly anodic inhibitor system and have a Langmuir isothermal adsorption process. The observed inhibitory behavior of compounds was supported by DFT calculation. It was also found that there was a strong correspondence between the theoretical and experimental results., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

In this study, a new eco-friendly kaolinite-cellulose (Kaol/Cel) composite was prepared from waste red bean peels ( Phaseolus vulgaris ) as a source of cellulose to serve as a promising and effective adsorbent for the removal of crystal violet (CV) dye from aqueous solutions. Its characteristics were investigated through the use of X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and zero-point of charge (pH pzc ). The Box-Behnken design was used to improve CV adsorption on the composite by testing its primary affecting factors: loading Cel into the composite matrix of Kaol (A: 0-50%), adsorbent dosage (B: 0.02-0.05 g), pH (C: 4-10), temperature (D: 30-60 °C), and duration (E: 5-60 min). The significant interactions with the greatest CV elimination efficiency (99.86%) are as follows: BC (adsorbent dose vs. pH) and BD (adsorbent dose vs. temperature) at optimum parameters (A: 25%, B: 0.05 g, C: 10, D: 45 °C, and E: 17.5 min) for which the CV's best adsorption capacity (294.12 mg/g) was recorded. The Freundlich and pseudo-second-order kinetic models were the best isotherm and kinetic models fitting our results. Furthermore, the study investigated the mechanisms responsible for eliminating CV by utilizing Kaol/Cel-25. It detected multiple types of associations, including electrostatic, n -π, dipole-dipole, hydrogen bonding interactions, and Yoshida hydrogen bonding. These findings suggest that Kaol/Cel could be a promising starting material for developing a highly efficient adsorbent that can remove cationic dyes from aqueous environments.

Synthesizing ZnO nanostructures ranging from 1 nm to 4 nm confines the electron cloud and exhibits a quantum effect generally called as quantum confinement effect attracting many researchers in the field of electronics and optics. ZnO nanostructures are used in medical applications to formulate antioxidant, antibacterial, antifungal, anti-inflammatory, wound healing, and anti-diabetic medications. This work is a comprehensive study of green synthesis of ZnO nanomaterials using different biological sources and highlights different processes able to produce nanostructures including nanowires, nanorods, nanotubes and other nano shapes of ZnO nanostructures. Different properties of ZnO nanostructures and their targeted bioengineering applications are also described. The strategies and challenges of the eco-friendly approach to enhance the application span of ZnO nanomaterials are also summarized, with future prospects for greener design of ZnO nanomaterials are also suggested., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The unique biological and physicochemical characteristics of biogenic (green-synthesized) nanomaterials (NMs) have attracted significant interest in different fields, with applications in the agrochemical, food, medication delivery, cosmetics, cellular imaging, and biomedical industries. To synthesize biogenic nanomaterials, green synthesis techniques use microorganisms, plant extracts, or proteins as bio-capping and bio-reducing agents and their role as bio-nanofactories for material synthesis at the nanoscale size. Green chemistry is environmentally benign, biocompatible, nontoxic, and economically effective. By taking into account the findings from recent investigations, we shed light on the most recent developments in the green synthesis of nanomaterials using different types of microbes and plants. Additionally, we cover different applications of green-synthesized nanomaterials in the food and textile industries, water treatment, and biomedical applications. Furthermore, we discuss the future perspectives of the green synthesis of nanomaterials to advance their production and applications.

This research aims to study the removal of Cobalt (Co) using chitin. The optimum conditions for removing Co were ascertained through batch experiments. This study involves the determination of chitin metal-binding efficiency by using a polymer enhanced diafiltration setup that utilizes a membrane process (ultrafiltration) to keep the Chitin. The effects of several parameters on sorption like pH, the concentrations of chitin, and Co were examined. The best efficiency was reached if the setup was run at pH < 6.3 (i.e., chitin pKa). At acidic conditions and by employing 6 g/L of chitin, Co level (20 mg/L) was decreased at 95%. To further investigate the kinetics of sorption for each gram of chitin, equilibrium experiments were carried out. For 1−100 mM Co, the performed rheological measurements show that chitin was observed to be moderately shear thickening at relatively lower levels (4 and 6 g/L); further, it was moderately shear thinning at slightly more important levels (12 and 20 g/L). Some improvement of the raw polymer will be necessary to enhance sorption to a sustainable limit and make this scheme an economically viable process.

Fipronil, a phenyl pyrazole insecticide, is extensively used in agriculture to control insect infestation. It has the potential to assimilate into the food chain, leading to serious health concerns. We report molecularly imprinted polymer (MIP)-based dispersive solid-phase microextraction for the targeted determination of fipronil in milk samples. Designing such a sorbent is of paramount importance for measuring the accurate amount of fipronil for monitoring its permissible limit. Response surface methodology based on a central composite design following a face-centered approach was used to optimize experimental conditions. The maximum binding capacity of 47 mg g -1 was achieved at optimal parameters of time (18 min), temperature (42 °C), pH (7), and analyte concentration (120 mg L -1 ). Under these conditions, a high percentage recovery of 94.6 ± 1.90% ( n = 9) and a low limit of detection (LOD) and limit of quantitation (LOQ) (5.64 × 10 -6 and 1.71 × 10 -5 μg mL -1 , respectively) were obtained. The MIP was well characterized through a scanning electron microscope (SEM) as well as Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) methods. Adsorption kinetics of the MIP followed the pseudo-first-order model ( R 2 0.99 and χ 2 0.96), suggesting the MIP-analyte interaction to be a physiosorptive process, while adsorption isotherms followed the Freundlich model ( R 2 0.99). The real sample analysis through high-performance liquid chromatography (HPLC) confirmed the selective determination of fipronil from milk samples., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

This study attempts to investigate the relationship between the dominance of reducing conditions and the biotransformation of pharmaceutical compounds, which has been scarcely reported in a continuous anaerobic treatment process. Previous batch experiments have discovered the possible implications of different reducing conditions on the biotransformation process, but have failed to reflect actual removal performance due to substrate limitations and other operational factors. Continuously operating reactors commonly receive wastewater stream containing a wide range of electron acceptors that diversify the growth of microorganisms in anaerobic treatment. The alteration of the dominance of reducing conditions in a continuous anaerobic reactor may result in the improvement of biotransformation performance compared to a single reducing condition in a substrate-limited batch experiment. The removal of psychostimulant caffeine (CAF), anti-diabetic drug gliclazide (GCZ), and anti-hypertensive drug prazosin (PRZ) were examined through the operation of an up-flow anaerobic sludge blanket (UASB) reactor under predominant methanogenic condition (Phase I) and simultaneous reducing conditions provided by a nitrate supplement (Phase II). The results revealed high biotransformation performance for all three compounds (73-> 99%) in both Phase I and Phase II experiments and fitted the pseudo-first-order model. The biotransformation rate of CAF and PRZ were relatively lower by 25% and 29%, while the GCZ rate improvement doubled in Phase II compared to Phase I. The outcome from 16s rRNA sequencing suggested that the biotransformation of the compounds may be driven by Firmicutes and Bacteroidota in both phases, and Burkhorderiales and sulfate-reducing bacteria species in Phase II. This study proved preferential of reducing conditions does not negatively affect the biotransformation performance of each pharmaceutical compound in a continuous anaerobic reactor, but they led to varying biotransformation rate, hence shifting the microbial diversity., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Molecularly imprinted biodegradable polymers are receiving considerable attention in drug delivery due to their ability of targeted recognition and biocompatibility. This study reports the synthesis of a novel fluorescence-active magnetic molecularly imprinted drug carrier (MIDC) using a glucose-based biodegradable cross-linking agent for the delivery of anticancer drug docetaxel. The magnetic molecularly imprinted polymer (MMIP) was characterized through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy, and vibrating sample magnetometry (VSM). The MMIP presented a magnetization value of 0.0059 emu g -1 and binding capacity of 72 mg g -1 with docetaxel. In vitro and in vivo studies were performed to observe the effectiveness of the MIDC for drug delivery. The cell viability assay suggested that the MMIP did not present toxic effects on healthy cells. The magnetic property of the MMIP allowed quick identification of the drug carrier at the target site by applying the external magnetic field to mice (after 20 min of loading) and taking X-ray images. The novel MMIP-based drug carrier could thus deliver the drug at the target site without affecting the healthy cells., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

In this research, the development of a novel brominated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO)-based homogeneous anion exchange membrane (AEM) via the solution casting method was reported. Fourier transform infrared spectroscopy was used to confirm the successful development of the BPPO-based AEM. The prepared AEM showed excellent thermal stability. It exhibited an ion exchange capacity of 2.66 mg/g, a water uptake ( W R ) of 68%, and a linear swelling ratio of 31%. Methyl orange (MO), an anionic dye, was used as a model pollutant to evaluate the ion exchange ability of the membrane. The adsorption capacity of MO increased with the increase in contact time, membrane dosage (adsorbent), temperature, and pH while declined with the increase in initial concentration of MO in an aqueous solution and molarity of NaCl. Adsorption isotherm study showed that adsorption of MO was fitted well to the Freundlich adsorption isotherm because the value of the correlation coefficient ( R 2 = 0.974) was close to unity. Adsorption kinetics study showed that adsorption of MO fitted well to the pseudo-second-order kinetic model. Adsorption thermodynamics evaluation represented that adsorption of MO was an endothermic (Δ H ° = 18.72 kJ/mol) and spontaneous process. The AEM presented a maximum adsorption capacity of 18 mg/g. Moreover, the regeneration of the prepared membrane confirmed its ability to be utilized for three consecutive cycles. The developed BPPO-based AEM was an outstanding candidate for adsorption of MO from an aqueous solution., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Pollutants derived from real textile wastewater present a high environmental risk. This work involves the study of the removal of chemical oxygen demand (COD), color, and turbidity from Tunisian real textile wastewater by two different water treatment technologies: chemical coagulation (CC) and electrocoagulation (EC). A comparative study between these two methods was conducted based on the separation performance and operating cost (OC). The effects of different operational parameters including electrolysis time ( t ), voltage, and pH for EC and the coagulant concentration, initial pH, and time of slow mixing ( t sm ) for CC were studied using response surface methodology. The developed quadratic models for the responses were in good agreement with the experimental data. The experiments proved the efficiency of both chemical and electrochemical techniques for the treatment of textile effluent. Indeed, by using EC, the reduction efficiencies of COD, color, and turbidity were 63.05, 99.07, and 96.31%, respectively, under optimal conditions (pH 9, t = 36.26 min, and voltage 4 V). For CC treatment, the achieved removal efficiencies of COD, color, and turbidity were 54.02, 96.21, and 93.7%, respectively, at pH 8.57, a coagulant concentration of 204.75 mg/L, and a t sm of 28.41 min as optimal operating conditions. The OC obtained for EC and CC was about 0.47 and 0.2 USD/m 3 , respectively. Even if the OC of the EC process was higher as compared to the CC process, the treated water obtained by EC meets the Tunisian Standards (NT 106.03 and NT 09-14) for textile wastewater discharge into the environment and demonstrates a high potential for its reuse in various industrial activities. EC technology can be integrated into a wastewater management system that ensures a zero liquid discharge of wastewater into the environment., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Highly flexible and stretchable sensors are becoming increasingly widespread due to their versatile applicability in human/robot monitoring sensors. Conductive polymeric composites have been regarded as potential candidates for such sensors, and carbon nanotubes (CNTs) are widely used to fabricate such composites. In the present study, CNT-embedded high flexible sensors were fabricated using a facile three-roll milling method, which mitigates the drawbacks of the conventional fabrication methods. CNTs content varied between 0.5 and 4.0 wt.%, and the percolation threshold range was obtained via conductivity/resistivity values of the fabricated sensors. Following this, the electrical stability of the sensors was examined against the various DC and AC signals. Furthermore, the fabricated sensors were stretched up to 500% strain, and their sensitivity against varying strain amplitudes was investigated in terms of the change in resistance and gauge factors. Lastly, the fabricated sensors were applied to human fingers for monitoring finger bending and releasing motions to validate their potential applications. The experimental results indicated that these sensors have a percolation threshold of around 2% CNTs content, and the sensors fabricated with 2 to 4% CNTs content showed measurable resistance changes against the applied strain amplitudes of 50-500%. Among these sensors, the sensor with 2% CNTs content showed the highest sensitivity in the studied strain range, exhibiting a resistance change and gauge factor of about 90% and 1.79 against 50% strain amplitude and about 18,500% and 37.07 against 500% strain amplitude, respectively. All these sensors also showed high sensitivity for finger motion detection, showing a resistance change of between 22 and 69%.

Background: The efficiency of herbal medicinal products depends on the quantity of active ingredients in them, which can vary considerably in different contents. Hence, the quality control of herbal medicines is a critical concern., Objective: This paper aims to provide a succinct review of recent chemometrics applications in solving the uncertainty of the authentication of herbal medicines over the last two decades., Methods: Studies involving chemometrics applications in conjunction with various analytical methods have been categorized according to the type of research used in the quality evaluation of different samples, including chromatographic (HPLC, GC-MS) and spectroscopic analysis (UVVis, FTIR, NMR, and MS)., Results: This review consists of over 90 studies illustrating the relevance of chemometrics methods in the discrimination based on the key bioactive components and phytochemical diversity of several herbs from closely related species. In addition to the prediction of the active components, the distinction between varieties and hybrids was accomplished through quantitative analysis techniques., Conclusion: Methods of chemometrics have provided an important and potent tool for the quality control and authentication of various herbs., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Osteoporosis is the leading cause of deformity and bones fracture all over the world and has some relationship with the blood concentrations of calcium and lead. Therefore, in the current study, the blood samples of 58 control and 56 clinically diagnosed osteoporotic and osteopenic patients were taken from different hospitals in Pakistan and analyzed for calcium and lead concentrations using atomic absorption spectrometry. In female control samples, the mean calcium value was found to be 98.53 ± 4.81 μg/mL, and in male control samples, the mean blood calcium level was found to be 121.33 ± 7.27 μg/mL. In female control samples, the mean lead value was found to be 0.133 ± 0.005 μg/mL, and in male control samples, the mean lead level was found to be 0.183 ± 0.008 μg/mL. All the male and female control samples showed a mean value of calcium of 115.63 ± 5.2 μg/mL and a mean value of lead of 0.153 ± 0.007 μg/mL. In osteoporotic female patients, the decline in the mean calcium value was found to be 34.93 ± 1.9 μg/mL, and in male patients, the decrease in the mean calcium level was found to be 47.73 ± 2.5 μg/mL. The increase in the mean value of lead in osteoporotic females was 4.13 ± 0.22 μg/mL, whereas in male patients, the increase in the mean lead value was 0.95 ± 0.07 μg/mL. All the male and female patients showed a decrease in the mean value of calcium of 41.43 ± 2.2 μg/mL and an increase in the mean value of Pb of 3.63 ± 0.16 μg/mL., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

The energy demand of the world is skyrocketing due to the exponential economic growth and population expansion. To meet the energy requirement, the use of fossil fuels is not a good decision, causing environmental pollution such as CO 2 emissions. Therefore, the use of renewable energy sources like biofuels can meet the energy crisis especially for countries facing oil shortages such as Pakistan. This review describes the comparative study of biodiesel synthesis for various edible oils, non-edible oils, and wastes such as waste plastic oil, biomass pyrolysis oil, and tyre pyrolysis oil in terms of their oil content and extraction, cetane number, and energy content. The present study also described the importance of biodiesel synthesis via catalytic transesterification and its implementation in Pakistan. Pakistan is importing an extensive quantity of cooking oil that is used in the food processing industries, and as a result, a huge quantity of waste cooking oil (WCO) is generated. The potential waste oils for biodiesel synthesis are chicken fat, dairy scum, WCO, and tallow oil that can be used as potential substrates of biodiesel. The implementation of a biodiesel program as a replacement of conventional diesel will help to minimize the oil imports and uplift the country's economy. Biodiesel production via homogeneous and heterogeneous catalyzed transesterification is more feasible among all transesterification processes due to a lesser energy requirement and low cost. Therefore, biodiesel synthesis and implementation could minimize the imports of diesel by significantly contributing to the overall Gross Domestic Product (GDP). Although, waste oil can meet the energy needs, more available cultivation land should be used for substrate cultivation. In addition, research is still needed to explore innovative solvents and catalysts so that overall biodiesel production cost can be minimized. This would result in successful biodiesel implementation in Pakistan., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

This work reported an efficient catalyst to reduce the organic pollutants by using an energetic periodic mesoporous organosilica (PMOS) supported with bismuth (Bi-PMOS) and cerium (Ce-PMOS). PMOS support was designed through co-condensation of sodium silicate and 3-methacryloxypropyltrimethoxysilane on polysorbate templates. The resultant PMOSs were fabricated with bismuth and cerium oxides to formulate Bi-PMOS and Ce-PMOS, respectively. These materials showed photo-degradations of methylene blue (MB, 74.7% and 41.1% with Bi-PMOS and Ce-PMOS, respectively) and methyl orange (MO, 53.2% and 39.4% with Bi-PMOS and Ce-PMOS, respectively). Such efficient photo-degradations were attributed to the precise doping of metallic nodes of Bi 2 O 3 and CeO 2 on the porous structure of PMOS with high surface area. The results also showed that Bi and Ce were more effective in PMOS support for photo-degradation of dyes as the support provides more lifetime to photo-generated electron-hole pairs than other materials. Moreover, active reusability and high degradation efficiencies of Bi-PMOS and Ce-PMOS proved them better analytical tools to reduce organic pollutants under visible lights. PRACTITIONER POINTS: The oxides of bismuth and cerium have impressive photocatalytic characteristics. New material energizing mesoporous organosilica with bismuth and cerium for photo-degradation of methylene blue and methyl orange in water. The use of an efficient catalyst to reduce the organic pollutants by using an energetic periodic mesoporous organosilica (PMOS) supported with bismuth (Bi-PMOS) and cerium (Ce-PMOS)., (© 2021 Water Environment Federation.)

Anion exchange membrane fuel cells (AEMFCs) are encouraging electrochemical structures for the competent and complaisant conversion of energy. Herein, the development of brominated poly(2,6-dimethyl phenylene oxide) (BPPO)-based anion exchange membranes (AEMs) with different quaternary ammonium groups for AEMFCs was reported. The successful preparation of AEMs was proved by utilizing proton nuclear magnetic resonance and Fourier transform infrared spectroscopy. They were explored in terms of water uptake ( W R ), ion exchange capacity (IEC), hydration number (λ), linear swelling ratio (LSR), morphology, tensile strength (TS), and elongation at break ( E b ). The alkaline stability of the prepared AEMs was assessed and compared with each other. The experimental outcomes demonstrated that the N -methylpyrrolidinium-based membrane (MPyPPO) exhibited higher alkaline stability, whereas the N -methylimidazolium-based membrane (MImPPO) showed the lowest alkaline stability among the prepared AEMs. Similarly, the hydroxide conductivity of the prepared AEMs was measured and compared with each other. The pyrrolidinium-based membrane (MPyPPO) exhibited higher hydroxide conductivity among the prepared AEMs., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

This manuscript describes the synthesis of dimethylethanolamine (DMEA)-grafted anion exchange membrane (AEM) by incorporating dimethylethanolamine as ion-exchange content into the polymer matrix via the solution casting method. The synthesis of the DMEA-grafted AEM was demonstrated by Fourier transform infrared (FTIR) spectroscopy. The prepared DMEA-grafted AEM exhibited higher thermal stability, homogeneous morphology, water uptake (W R ) of 115%, and an ion exchange capacity (IEC) of 2.70 meq/g. It was used for the adsorptive removal of methyl orange (MO) from an aqueous solution via batch processing. The effect of several operating factors, including contact time, membrane dosage, initial concentration of aqueous dye solution, and temperature on the percentage discharge of MO and adsorption capacity, was evaluated. Experimental data for adsorption of MO onto the DMEA-grafted AEM was analyzed with two parameter and three parameter nonlinear adsorption isotherm models but fitted best using a nonlinear Freundlich isotherm. Adsorption kinetics were studied by using several models, and attained results showed that experimental data fitted well to pseudo-second-order kinetics. A thermodynamic study showed that adsorption of MO onto the prepared DMEA-grafted AEM was an endothermic process. Moreover, it was a feasible and spontaneous process.

In this work, the synthesis of a series of the functionalized inorganic/organic composite anion exchange membranes (AEMs) was carried out by employing the varying amount of inorganic filler consist of N -(trimethoxysilylpropyl)- N , N , N -trimethylammonium chloride (TMSP-TMA + Cl - ) into the quaternized poly (2, 6-dimethyl-1, 4-phenylene oxide) (QPPO) matrix for acid recovery via diffusion dialysis (DD) process. Fourier transform infrared (FTIR) spectroscopy clearly demonstrated the fabrication of the functionalized inorganic/organic composite AEMs and the subsequent membrane characteristic measurements such as ion exchange capacity (IEC), linear swelling ratio (LSR), and water uptake (W R ) gave us the optimum loading condition of the filler without undesirable filler particle aggregation. These composite AEMs exhibited IEC of 2.18 to 2.29 meq/g, LSR of 13.33 to 18.52%, and W R of 46.11 to 81.66% with sufficient thermal, chemical, and mechanical stability. The diffusion dialysis (DD) test for acid recovery from artificial acid wastewater of HCl/FeCl 2 showed high acid DD coefficient (U H + ) (0.022 to 0.025 m/h) and high separation factor (S) (139-260) compared with the commercial membrane. Furthermore, the developed AEMs was acceptably stable (weight loss < 20%) in the acid wastewater at 60 °C as an accelerated severe condition for 2 weeks. These results clearly indicated that the developed AEMs have sufficient potential for acid recovery application by DD process.

Bee pollen collected by honeybees ( Apis mellifera ) is one of the bee products, and it is as valuable as honey, propolis, royal jelly, or beebread. Its quality varies according to its geographic location or plant sources. This study aimed to apply rapid, simple, and accurate analytical methods such as attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and high-performance liquid chromatography (HPLC) along with chemometrics analysis to construct a model aimed at discriminating between different pollen samples. In total, 33 samples were collected and analyzed using principal component analysis (PCA), hierarchical clustering analysis (HCA), and partial least squares regression (PLS) to assess the differences and similarities between them. The PCA score plot based on both HPLC and ATR-FTIR revealed the same discriminatory pattern, and the samples were divided into four major classes depending on their total content of polyphenols. The results revealed that spectral data obtained from ATR-FTIR acquired in the region (4000-500 cm -1 ) were further subjected to a standard normal variable (SNV) method that removes scattering effects from spectra. However, PCA, HCA, and PLS showed that the best PLS model was obtained with a regression coefficient ( R 2 ) of 0.9001, root-mean-square estimation error (RMSEE) of 0.0304, and root-mean-squared error cross-validation (RMSEcv) of 0.036. Discrimination between the three species has also been possible by combining the pre-processed ATR-FTIR spectra with PCA and PLS. Additionally, the HPLC chromatograms after pre-treatment (SNV) were subjected to unsupervised analysis (PCA-HCA) and supervised analysis (PLS). The PLS model confers good results by factors ( R 2 = 0.98, RMSEE = 8.22, and RMSEcv = 27.86). Prospects for devising bee pollen quality assessment methods include utilizing ATR-FTIR and HPLC in combination with multivariate methods for rapid authentication of the geographic location or plant sources of bee pollen., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)