Search

Allergic conjunctivitis (AC) comprises a group of conditions triggered by environmental allergens, substantially diminishing the quality of life, particularly among children and adolescents. The mechanical impact of eye rubbing in patients with AC is known to induce biomechanical alterations in the cornea. Modern instruments enable the detection and quantification of these corneal biomechanical changes. The ocular response analyzer and CorVis ST have become standard tools for assessing corneal biomechanical properties. We conducted a review of studies that have investigated corneal biomechanics in patients with AC using both devices to elucidate the association between corneal biomechanical changes and early ectasia development. Our analysis highlights significant findings regarding the tomographic biomechanical index parameter in corneal biomechanics among patients with AC. These findings underscore the importance of ocular screening for all patients to promptly detect subclinical keratoconus changes, thereby improving disease management and outcomes., (Copyright © 2024 Copyright: © 2024 Indian Journal of Ophthalmology.)

Purpose: The purpose of this study was to investigate corneal biomechanics in pellucid marginal degeneration (PMD) compared with healthy controls using Corvis ST (Oculus, Germany) by using the new biomechanical E-staging (based on the Corvis Biomechanical Factor, the linearized Corvis Biomechanical Index) together with tomographic parameters., Methods: Corneal biomechanical and topographic data of 75 eyes of 75 patients with PMD and 75 eyes of 75 age-matched and sex-matched healthy controls were investigated. Topographic parameters (K1, K2, Kmax, central corneal thickness (CCT), and Belin/Ambrósio Deviation Index (BAD-D) were evaluated in dependence of and correlated with the biomechanically defined E-stages. Biomechanical parameters were also recorded for the 2 groups., Results: Patients with PMD showed higher K2, Kmax, BAD-D, and Corvis Biomechanical Factor values and a lower CCT compared with healthy controls ( P < 0.001). The E-stage was positively correlated with K1, K2, Kmax, BAD-D, and intraocular pressure difference and negatively correlated with CCT. Stage-dependent analysis revealed a significant increase in K1, K2, Kmax ( P < 0.001), and BAD-D ( P = 0.041) in stage E3 compared with E0 and a significant decrease in stage E2 in CCT ( P = 0.009) compared with E0., Conclusions: This study showed that patients with PMD may have a reduced corneal stiffness compared with healthy controls which worsens with increasing E-stage. Significant changes in topographic parameters were observed at stage E2 for CCT and at stage E3 for K1, K2, Kmax, and BAD-D when compared with stage E0., Competing Interests: The authors have no funding or conflicts of interest to disclose., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Purpose: To evaluate the corneal biomechanical characteristics of eyes with Sturge-Weber syndrome (SWS) secondary glaucoma (SSG) by analyzing corneal biomechanical parameters obtained using the Corneal Visualization Scheimpflug Technology instrument (Corvis ST)., Methods: In patients with SWS, eyes affected by SSG were designated as the SSG group while the contralateral eyes were designated as the SWS contralateral group (SC group). Patients from the myopia clinic served as the control group. Dynamic corneal response parameters (DCRs) including the stress-strain index (SSI)-a critical material stiffness parameter that excludes interference from IOP and central corneal thickness (CCT)-were analyzed., Results: For CCT, no significant difference was observed between the SSG and SC groups. However, significant differences were found between the SSG and control groups and between the SC and control groups. Parameters such as HC Time, A1 Deformation Amp., A2 Deformation Amp., length of Whole Eye Movement (WEM), DA Ratio Max (2 mm), PachySlope, DA Ratio Max (1 mm), and ARTh showed significant differences between the SSG group and control group. In the SSG group, 4 of night eyes had an SSI of less than 0.85., Conclusions: Some DCRs indicated a stiffer cornea in the SSG group, possibly due to a thicker cornea in this group. On analyzing SSI, it was found that corneal material properties change, becoming less stiff in some of the patients with SSG. In conclusion, our study provides a preliminary exploration of the biomechanical properties of SWS secondary glaucoma., Competing Interests: All authors declare no conflict of interest., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Purpose: To evaluate the corneal biomechanical metrics of Chinese adults with myopia and identify relevant factors of Brillouin microscopy., Methods: In this cross-sectional study, corneal biomechanics in Chinese adults with myopia were quantified and analyzed using Brillouin microscopy and the Corvis ST (CST) (Oculus Optikgeräte GmbH) and analyzed. Univariate linear regression was used with potential factors including age, sex, spherical equivalent (SE), intraocular pressure (IOP), central corneal thickness (CCT), and mean keratometry (Kmean)., Results: The study included 87 eyes of 87 participants (mean age: 24.47 ± 6.27 years). Central, Mean, maximum (Max), minimum (Min), standard deviation, and Max-Min Brillouin modulus (BM) values obtained from Brillouin microscopy exhibited values of 2.826 ± 0.039, 2.827 ± 0.027, 2.864 ± 0.034, 2.790 ± 0.038, 0.108 ± 0.042, and 0.074 ± 0.041 GPa, respectively. No significant correlations were found between BM parameters and age, sex, SE, IOP, or CCT. However, the Mean (β = -0.251, P = .019), Min (β = -0.315, P = .003), and Max-Min (β = 0.229, P = .033) BM values were significantly associated with Kmean. The Central, Mean, Min, and Max BM values negatively correlated with the Tomographic Biomechanical Index measured by CST (Spearman's r = -0.24, -0.35, -0.29, and -0.23, respectively, all P < .05)., Conclusions: Brillouin microscopy accurately reflects corneal biomechanical parameters in Chinese adults with myopia, independent of IOP and CCT, with a good correlation with CST. Concurrent evaluation of the corneal curvature is imperative when employing Brillouin microscopy in clinical practice. [ J Refract Surg . 2024;40(10):e768-e776.] .

We explore the effect of stress-recovery schedule on the cumulative creep response of lumbar tissues. Twelve participants performed a 48-minute protocol that consisted of 12 min of full trunk flexion and 36 min of upright standing. Two stress-recovery (work-rest) schedules were considered: a) three minutes of full trunk flexion followed by twelve minutes of upright standing (3:12), and b) one minute of full trunk flexion followed by four minutes of upright standing (1:4). Lumbar kinematics and EMG activity of erector spinae muscles were collected. Cumulative creep deformation was explored by considering the changes in peak lumbar flexion angles during full flexion and changes in the angles of flexion-relaxation (EMG-off) of the lumbar extensor musculature after the 48-minute protocol. The results of time-dependent lumbar flexion angle during full flexion revealed a noticeable creep response in both work-rest schedules, but the cumulative creep response was significantly greater in the 3:12 schedule (Δ3.5°) than in the 1:4 schedule (Δ1.6°). Similarly, the change in the EMG-off lumbar flexion angle in the 3:12 schedule was significantly greater than in the 1:4 schedule (Δ2.5° vs -Δ0.2°, respectively). These results indicate that the passive lumbar tissues recover their force producing capability more rapidly with shorter cycle times., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Purpose: To evaluate the changes in corneal biomechanical properties and tear film layer analysis after upper eyelid blepharoplasty surgery., Method: Sixty eyes of 30 patients were included in our prospective study. Corneal hysteresis (CH), corneal resistance factor (CRF), corneal compensated intraocular pressure (IOPcc) and Goldmann intraocular pressure (IOPg) measurements were taken with the Ocular Response Analyzer (ORA) device at the preoperative, postoperative 1st and 3rd months. The ocular surface was evaluated with tear breakup time (TBUT) and Ocular Surface Disease Index (OSDI) scores. Lid crease (LC), margin-to-reflex distance 1 (MRD1), and palpebral fissure height (PFH) were evaluated at each visit., Results: In the ORA analysis, in the 1st month CH value was found to be significantly lower than the preoperative value (preoperative 13.39 ± 6.08 mmHg; 1st month 10.74 ± 1.94 mmHg, p = 0.011). In addition, there was a statistically significant decrease in the 3rd month value compared to the preoperative values (10.46 ± 1.69 mmHg, p = 0.021). However CRF decreased postoperatively, no statistical difference was detected (preop 12.59 ± 3.84; 1st month 11.94 ± 3.04; 3rd month 9.78 ± 1.74; p = 0.149). While there was a decrease in IOPcc and IOPg in the postoperative period, no statistical difference was detected (respectively p = 0.96, p = 0.71). In the postoperative 1st month, TBUT increased significantly (p = 0.024). When those with a TBUT value below 10 were considered dry eye, significant decrease was observed in the percentage of dry eye in the first postoperative month (p = 0.027). Although the dry eye percentage decreased in the 3rd month compared to the preoperative percentage, no statistical difference was detected (p = 0.125). There was a significant decrease in the number of those with an OSDI score above 13 in the first month (p = 0.004)., Conclusion: In our study, a decrease in ORA values was observed after blepharoplasty, with only CH being statistically significant. Reducing the load on the cornea after surgery may change the corneal biomechanics. These changes should be taken into consideration after eyelid surgery, especially in patients who may require glaucoma follow-ups., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Purpose: Evaluation of combined corneal tomographic and biomechanical parameters in subclinical/forme fruste keratoconus (ScKC/FFKC)., Design: Cross-sectional observational case-control study., Methods Inclusion Criteria: Thirty-one eyes with ScKC (fellow eye of KC with any one sign: keratometry >47 diopters, cylinder >1.5 D, central corneal thickness <500 µm, with/without abnormal topography) or FFKC (fellow eye of KC with normal topography and slit lamp examination) >13 years (cases) and 44 eyes of age-matched 22 healthy subjects (controls)., Exclusion Criteria: Clinically diagnosed KC, presence of corneal scars, and prior ocular surgery eyes., Study Parameters: Sixteen Pentacam, 15 Corvis ST, and five Sirius parameters were analyzed using paired sample t -test, and a subsample found to be significantly different was used in receiver operating characteristic curve analysis. The Youden index was calculated, and Pearson's correlation analysis was done., Results: Five Pentacam, three Corvis ST, and two Sirius parameters had an area under curve (AUC) >0.75. Tomographic and biomechanical index (TBI) (cutoff 0.59, 95% specificity, 77% sensitivity), Belin Ambrosio enhanced ecstasia display (cutoff 1.8, 81% specificity, 80% sensitivity), and symmetry index of posterior corneal curvature (cutoff 0.16, 97% specificity, 67% sensitivity) best identified early KC. TBI strongly correlated with maximum Pentacam parameters in both cases and controls. Corvis biomechanical index strongly correlated only in cases, and SP-A1-SD weakly correlated in cases., Conclusion: Upon combined analysis, the average sensitivity and specificity, respectively, of top three parameters (according to AUC) from Pentacam and Corvis ST were 74.1% and 95.4% for posterior elevation and TBI., Trial Registration: The trial was registered in Clinical Trial Registry of India on January 28, 2022. The Trial Registration Number is REF/2022/01/050638., (Copyright © 2024 Copyright: © 2024 Indian Journal of Ophthalmology.)

Objective: Oscillometric finger pressing is a smartphone-based blood pressure (BP) monitoring method. Finger photoplethysmography (PPG) oscillations and pressure are measured during a steady increase in finger pressure, and an algorithm computes systolic BP (SP) and diastolic BP (DP) from the measurements. The objective was to assess the impact of finger artery viscoelasticity on the BP computation., Methods: Nonlinear viscoelastic models relating transmural pressure (finger BP - applied pressure) to PPG oscillations during finger pressing were developed. The output of each model to a measured transmural pressure input was fitted to measured PPG oscillations from 15 participants. A parametric sensitivity analysis was performed via model simulations to elucidate the viscoelastic effect on the derivative-based BP computation algorithm., Results: A Wiener viscoelastic model comprising a first-order transfer function followed by a static sigmoidal function fitted the measured PPG oscillations better than an elastic model containing only the static function (median (IQR) error of 30.5% (25.6%-34.0%) vs 50.9% (46.7%-53.7%); p<0.01). In Wiener model simulations, the derivative algorithm underestimated SP, especially with high pulse pressure and low transfer function cutoff frequency (i.e., greater viscoelasticity). The mean of the normalized PPG waveform at the maximum oscillation beat was found to correlate with the cutoff frequency (r = -0.8) and could thus possibly be used to compensate for viscoelasticity., Conclusion: Finger artery viscoelasticity negatively impacts oscillometric BP computation algorithms but can potentially be compensated for using available measurements., Significance: These findings may help in converting smartphones into truly cuffless BP monitors for improving hypertension awareness and control.

Purpose: To investigate corneal biomechanical changes after corneal cross-linking (CXL) treatments with rose bengal-green light (RB-CXL) and riboflavin-UVA (RF-CXL)., Methods: A total of 60 freshly enucleated lamb eyes were obtained for this experimental study. Fifteen eyes were treated with RB-CXL using 0.1% RB solution (Group 1), 15 eyes were treated with RB-CXL using 0.2% RB solution (Group 2), 15 eyes were treated with RF-CXL using 0.1% RF solution (Group 3), and 15 eyes were used as controls (Group 4). The same treatment protocol (10-minute irradiation using a total of 5.4 J/cm 2 energy) was applied to all treatment groups. To evaluate corneal biomechanical changes, the stress-strain test was used for both the treated and control corneas. The elastic modulus was calculated using the tension strain curves obtained during the test., Results: The average elastic modulus values were calculated to be 18.9, 23.5, 22.3, and 14.1 MPa in Groups 1, 2, 3, and 4, respectively. Statistically significant differences were found between the groups ( p  < 0.001 for Group 1 vs. 2; p  < 0.001 for Group 1 vs. 3; p  < 0.001 for Group 1 vs. 4; p  = 0.002 for Group 2 vs. 3; p  < 0.001 for Group 2 vs. 4; and p  < 0.001 for Group 3 vs. 4)., Conclusions: In this study, the efficacy of RB-CXL treatment applied using different concentrations of RB solutions at a total energy of 5.4 J/cm 2 was investigated, and 0.2% RB solution was found to have at least as much and even more effective than the RF-CXL (0.1% RF) on the corneal elasticity module. These results are encouraging for the treatment of ectatic corneas particularly below 400 μm. It is considered that the findings obtained from this study will guide future experimental and clinical studies.

Aims: To investigate the association between corneal hysteresis and the presence of glaucoma and its subtypes in a general Japanese population., Methods: We analysed the data of 2338 Japanese community-dwellers aged ≥40 years (1059 men, 1279 women) who underwent an eye examination in 2018 as part of the population-based, cross-sectional Hisayama Study. Participants were divided into quartile levels of corneal hysteresis, which had been measured with an ocular response analyzer. Glaucoma was defined based on the International Society of Geographical and Epidemiological Ophthalmology criteria. We conducted a logistic regression analysis to determine the ORs and their 95% CIs for the presence of outcomes according to the corneal hysteresis quartiles., Results: Glaucoma was diagnosed in 154 participants: primary open-angle glaucoma (POAG), n=115; primary angle-closure glaucoma, n=17; exfoliation glaucoma, n=21 and secondary glaucoma without exfoliation glaucoma, n=1. After adjustment for confounders, the OR for prevalent glaucoma was significantly increased in the participants in the first corneal-hysteresis quartile compared with those in the fourth quartile (OR: 1.80; 95% CI: 1.03 to 3.17). Regarding glaucoma subtypes, the first-quartile participants had significantly greater likelihoods of the presence of POAG (OR: 1.63; 95% CI: 1.02 to 2.61) and exfoliation glaucoma (OR: 6.49; 95% CI: 1.44 to 29.30) compared with those in the third and fourth quartiles after adjustment for potential confounders., Conclusions: These results demonstrated a significant inverse association between corneal hysteresis and the likelihood of glaucoma, suggesting that the measurement of corneal hysteresis would provide useful information for elucidating the aetiology of glaucoma., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2024. No commercial re-use. See rights and permissions. Published by BMJ.)

Purpose: To comprehensively identify the corneal biomechanical differences measured by Corvis ST between different degrees of myopia and emmetropia., Design: Systematic review and meta-analysis., Methods: Electronic databases, including PubMed, Embase, and Web of Science, were systematically searched for studies comparing the corneal biomechanics among various degrees of myopes and emmetropes using Corvis ST. The weighted mean differences and 95% confidence intervals were calculated. Meta-analysis was performed in high and nonhigh myopes and in myopes and emmetropes, respectively., Results: Eleven studies were included in this study. The meta-analysis among myopes and emmetropes included 1947 myopes and 621 emmetropes, and 443 high myopes and 449 nonhigh myopes were included in the meta-analysis among high and nonhigh myopia. Myopes showed the cornea with significantly longer time at the first applanation (A1t) and lower length at the second applanation (A2L) than emmetropes. High myopes showed significantly greater A1t, velocity at the second applanation (A2v), deformation amplitude at the highest concavity (HC-DA), and peak distance at the highest concavity (HC-PD) and decreased time at the second applanation (A2t) and radius of the highest concavity (HC-R)., Conclusions: Corneal biomechanics is different in myopia, especially in high myopia. Compared with nonhigh myopes, the corneas of high myopes deformed slower during the first applanation, faster during the second applanation, and showed greater deformation amplitude, indicating greater elasticity and viscidity., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Purpose: The aim of this study was to evaluate the effects of different stages of diabetic retinopathy (DR) and metabolic control of blood glucose levels on corneal biomechanical parameters., Methods: Diabetic patients were categorized into three groups: no DR group, nonproliferative DR (NPDR) group, and proliferative DR (PDR) group. Of the 141 eyes examined, 40 belonged to the control group, 34 to no DR group, 34 to NPDR group, and 33 to PDR group. Using an Ocular Response Analyzer to measure corneal hysteresis (CH), corneal resistance factor (CRF), Goldmann-correlated intraocular pressure (IOPg), and corneal-compensated IOP (IOPcc). IOP was assessed using a Tono-Pen, while central corneal thickness (CCT) was determined using an ultrasonic pachymeter. HbA1c levels were also recorded. We conducted comparisons among these groups across biomechanical parameters and IOP (tonopen), and CCT, while also investigating the impact of HbA1c levels on these parameters., Results: Among any groups show a statistically significant difference in CCT, IOP (tonopen), CH, CRF, IOPg, and IOPcc. In diabetic patients, CRF, CTT, and IOPg values were significantly higher in those with HbA1c levels ≥ 7 mg/dl than in those with HbA1c levels < 7 mg/dl ( p  = 0.009, p  = 0.013, p  = 0.038), respectively, while there was no statistically significant difference in IOPcc, CH, and IOP (tonopen). Linear regression analysis showed that CH was positively associated with CCT ( p  < 0.001) and negatively associated with IOPcc ( p  < 0.001), while CRF was positively associated with CCT ( p  < 0.001), HbA1c ( p  < 0.05), and negatively associated with diagnosis of DR ( p  < 0.05)., Conclusion: This study underscores the influence of metabolic control, as reflected by HbA1c levels, on corneal biomechanical parameters in diabetic patients, emphasizing the importance of monitoring and managing glycemic control in this population.

Purpose: To assess the corneal biomechanical properties in normal individuals and patients with keratoconus using the Brillouin optical scanning system (Intelon Optics) (BOSS) and compare them with ultra-high-speed Scheimpflug imaging (Corvis ST; Oculus Optikgeräte GmbH)., Methods: Sixty eyes from 60 patients (30 normal and 30 keratoconus) were included in this prospective, single-center, comparative, non-interventional study. Corneal biomechanics were evaluated using the Corvis ST and the BOSS. With the BOSS, each corneal image was acquired three times, measuring 10 locations within an 8-mm diameter. Parameters extracted included mean, maximum, and minimum Brillouin shift. These 10 points were also grouped into superior, central, and inferior regions. BOSS repeatability was assessed using the coefficient of repeatability and coefficient of variation. Furthermore, normal individuals and patients with keratoconus were compared using the Corvis ST and BOSS., Results: The BOSS exhibited good repeatability, with coefficient of repeatability ranging from 0.098 to 0.138 GHz for single points in normal individuals and 0.096 to 0.149 GHz for patients with keratoconus. Statistical analysis revealed significant differences between normal individuals and patients with keratoconus, indicating softer corneas in keratoconus, observed with both the Corvis ST and BOSS. Specifically, the BOSS showed significant differences in mean, inferior, and superior mean, maximum, and minimum Brillouin frequency shift (all P < .05), whereas the Corvis ST displayed highly significant differences in stiffness parameter at first applanation, stress strain index, deformation amplitude ratio, and inverse integrated radius (all P < .001)., Conclusions: Corneal biomechanical measurements proved highly repeatable and effectively demonstrated significant differences between normal individuals and patients with keratoconus using both the BOSS and the Corvis ST. [ J Refract Surg . 2024;40(8):e569-e578.] .

Background: Skin conditions in patients with lymphedema have been identified according to changes in skin mechanical properties. The skin elasticity meter is a non-invasive tool for measuring the mechanical properties of the skin; however, its potential use in patients with lymphedema has received little attention. This review aimed to provide an overview of studies measuring the skin mechanical properties of patients with lymphedema using a skin elasticity meter., Materials and Methods: Search terms and synonyms related to lymphedema and skin mechanical property measurement using a skin elasticity meter were identified, and electronic databases containing articles in English were searched., Results: A total of 621 articles were retrieved, and four articles were analyzed after screening. Despite this research subject receiving increasing attention, no consensus has been reached regarding the best methods., Conclusion: Measurement methods are expected to be standardized in the future to elucidate the skin mechanical properties of patients with lymphedema., (© 2024 The Author(s). Skin Research and Technology published by John Wiley & Sons Ltd.)

Purpose: To investigate the percent change in central corneal thickness (%ΔCCT) during air-puff-induced deformation as an indicator of corneal biomechanical response., Methods: Forty ex vivo human eyes from forty donors were imaged using the CorVis ST at experimentally controlled intraocular pressure (IOP) of 10, 20, 30, and 40 mmHg, followed by uniaxial strip testing to calculate tensile modulus. The CorVis ST research software tracked the anterior and posterior cornea edges and determined the dynamic corneal response (DCR) parameters. Eyes were excluded if image quality or posterior tracking issues were present. Custom algorithms were used to calculate CCT during deformation using a ray-tracing method to correct for Scheimpflug and optical distortion within each image. Correlation and stepwise regression analyses between the shape-related DCR parameters and %ΔCCT were conducted. A mixed model analysis was performed to test the effect of IOP and the strongest significant predictors of the stepwise regression on %ΔCCT. The significance threshold was set to p  < 0.05., Results: Thirty eyes were ultimately analyzed and CCT increased significantly from the pre-deformation state to the highest concavity state at each IOP level ( p  < 0.001). IOP and multiple shape DCRs were found to be significantly related to %ΔCCT ( p  < 0.0001). The strongest predictor of %ΔCCT was integrated inverse radius (IIR) ( p  < 0.0001; partial R 2 = 0.4772) with no other parameter having a partial R 2 value greater than 0.04. The mixed model analysis showed that IIR was the sole predictor ( p  = 0.0098) and IOP was no longer significant as a single predictor. However, the interaction of IIR with IOP ( p  = 0.0023) had a significant effect on %ΔCCT., Conclusion: Percent change in CCT is influenced by corneal stiffness as indicated by the significant relationship with IIR. The %ΔCCT may be a potential biomarker for determining differences in corneal deformation response with corneal diseases.

Purpose: To compare early changes in the corneal biomechanical parameters after photorefractive keratectomy (PRK) and small incision lenticule extraction (SMILE) and their correlations with corneal shape parameters., Methods: One hundred twenty four eyes received myopic PRK and SMILE for similar amounts of myopia. Corneal tomography with Pentacam HR, biomechanical parameters using Corvis ST, and Ocular Response Analyzer (ORA) were evaluated before and 2 weeks after surgery. The change in each parameter was compared between groups, while the difference in central corneal thickness and cornea-compensated intraocular pressure measured before and after surgery were considered as covariates., Results: A significant reduction was seen in the corneal stiffness parameter at first applanation, and an increase in deformation amplitude ratio (DAR), and integrated inverse radius (IIR) in both groups after surgery (p < 0.001) Changes in DAR, and IIR were significantly greater in the SMILE than in the PRK group (p < 0.001) Corneal hysteresis (CH) and corneal resistance factor (CRF) decreased in both SMILE and PRK groups after surgery, (p < 0.001) with no statistically significant difference between groups (p > 0.05) Among new Corvis ST parameters, DAR showed a significant correlation with changes in Ambrosio relational thickness in both groups (p < 0.05)., Conclusions: Both techniques caused significant changes in corneal biomechanics in the early postoperative period, with greater elastic changes in the SMILE group compared to the PRK group, likely due to lower tension in the SMILE cap and thinner residual stromal bed in SMILE. There were no differences in viscoelastic changes between them, so the lower CH may reflect the volume of tissue removed., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Eight pig tracheal strips were stimulated to contract with log increments of methacholine from 10 -8 to 10 -5 M. For each strip, the concentration-response was repeated four times in a randomized order to measure isometric force, isotonic shortening against a load corresponding to either 5 or 10 % of a reference force, and average force, stiffness, elastance and resistance over one cycle while the strip length was oscillating sinusoidally by 5 % at 0.2 Hz. For each readout, the logEC50 was calculated and compared. Isotonic shortening with a 5 % load had the lowest logEC50 (-7.13), yielding a greater sensitivity than any other contractile readout (p<0.05). It was followed by isotonic shortening with a 10 % load (-6.66), elastance (-6.46), stiffness (-6.46), resistance (-6.38), isometric force (-6.32), and average force (-6.30). Some of these differences were significant. For example, the EC50 with the average force was 44 % greater than with the elastance (p=0.001). The methacholine sensitivity is thus affected by the contractile readout being measured., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Skin physiology seems to be influenced by dietary choices and body composition, although links between these factors remain poorly characterised. In the present manuscript, we elaborate on the potential relationships among food groups, body composition and skin physiology in omnivores and vegetarians., Material and Methods: This cross-sectional observational study involved 181 participants, 129 omnivores and 52 vegetarians. The main functions of the skin measured in our laboratory were transepidermal water loss, deep and superficial epidermal hydration, skin elasticity, and carotenoid content. Skin variables obtained from different body regions were made comparable by a new Proportional Skin Index calculated to respect their relative representativity., Results: No statistical differences were found when comparing both groups' body composition and skin variables from different body regions, with the exception of the skin carotenoid content significantly higher in the vegetarian group (p < 0.001)., Conclusion: Although dietary patterns significantly differed between groups, with vegetarians consuming fewer animal-derived products and more plant-based foods, multiple linear regression analysis revealed no differences or association between the dietary pattern and the skin physiology. These findings highlight the need for further research to elucidate the specific impact of diet and food groups and body composition on skin physiology., (© 2024 The Author(s). Skin Research and Technology published by John Wiley & Sons Ltd.)

Purpose: To investigate and compare the association of corneal hysteresis (CH) in patients with secondary glaucoma to control patients and patients with primary open-angle glaucoma (POAG). Additionally, to determine the consistency of CH measurements in patients with secondary glaucoma., Methods: A total of 84 patients (121 eyes) were prospectively included in this study. Twenty-three patients (46 eyes) were healthy controls, 24 patients (40 eyes) were diagnosed with POAG, and 27 patients (35 eyes) were diagnosed with a form of secondary glaucoma. CH and intraocular pressure (IOP) were measured using the Ocular Response Analyzer. Three measurements per eye were performed and used for the analysis and to determine fluctuations in CH data. One-way ANOVA with post-hoc Bonferroni analysis and Chi-Squared testing was done to determine differences between groups., Results: All patients were matched for age. Patients in both POAG and secondary glaucoma groups were matched for age and IOP. All groups had similar sex and racial compositions as well as similar proportions of diabetes, hypertension, and hyperlipidemia. CH was lower ( p  < .05) in patients with POAG (9.32 ± 1.64) and secondary glaucoma (7.89 ± 3.18) when compared to healthy controls (11.16 ± 1.60). Fluctuations in CH measurements were minimal in all groups. Further analysis of the secondary glaucoma group revealed no differences in CH between different types of secondary glaucoma ( p  > .05)., Conclusion: Patients with secondary glaucoma have lower CH when compared to POAG or control groups. The ORA exhibits precision of CH measurements for control, POAG, and secondary glaucoma groups, making it a reliable tool in management of secondary forms of glaucoma.

Purpose: The aim of this study was to analyze changes in corneal biomechanical properties after implantation of intracorneal ring segments (ICRSs) in keratectasia., Methods: This retrospective single-center study included 112 patient eyes that underwent femtosecond laser-assisted ICRS implantation (Intacs SK; Addition Technology Inc, Des Plaines, IL) for keratectasia. Biomechanical analysis was performed using the Ocular Response Analyzer (ORA; Reichert Inc, Depew, NY), with determination of corneal resistance factor, corneal hysteresis, and Keratoconus Match Index, as well as by Corvis ST (OCULUS, Wetzlar, Germany), with determination of stiffness parameter A1, Ambrosio relational thickness to the horizontal profile (Arth), integrated radius, deformation amplitude ratio, and stress-strain index as well as Corvis Biomechanical Index and Tomographic Biomechanical Index. Data collection was performed preoperatively and 6 months postoperatively for ORA and Corvis ST and additionally after 1 and 2 years for ORA., Results: The corneal resistance factor decreased significantly postoperatively (5.8 ± 1.7 mm Hg) compared with preoperatively (6.75 ± 3.7 mm Hg; P = 0.021) and increased again during follow-up (6.2 ± 1.9 mm Hg; P = 0.024), without regaining preoperative values. Corneal hysteresis and Keratoconus Match Index did not change significantly. Stiffness parameter A1 ( P = 0.045) increased significantly after ICRS implantation and Arth decreased significantly from 181 ± 85 to 150 ± 92 ( P = 0.016). However, there was no significant postoperative change for others Corvis parameters., Conclusions: Corneal biomechanical properties showed inconsistent changes after ICRS implantation. Classical corneal biomechanical parameters (using single central air-puff tonometers) do not seem to be suitable for follow-up after ICRS implantation., Competing Interests: The authors have no funding or conflicts of interest to disclose., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Purpose: Recent evidence suggests that venous congestion at the vortex vein significantly contributes to the development of central serous chorioretinopathy (CSCR), and sclera is observed to be thicker in affected eyes. This study aims to investigate whether eyes with CSCR exhibit stiff corneas, measured using Corneal Visualization Scheimflug Technology (Corvis ST), which may serve as an indicator of scleral stiffness., Methods: This retrospective case-control study comprises 52 eyes from 33 patients diagnosed with CSCR and 52 eyes from 32 normal controls without CSCR. We compared biomechanical parameters measured with Corvis ST and anterior scleral thickness measured using anterior segment swept-source optical coherence tomography between the two groups., Results: Age, sex, axial length, intraocular pressure, and central corneal thickness showed no significant differences between the two groups (p > 0.05, linear mixed model). Three biomechanical parameters-peak distance, maximum deflection amplitude, and integrated inverse radius-indicated less deformability in CSCR eyes compared to control eyes. The stress-strain index (SSI), a measure of stiffness, and anterior scleral thickness (AST) at temporal and nasal points were significantly higher in the CSCR eyes. SSI and AST were not correlated, yet both were significantly and independently associated with CSCR in a multivariate logistic regression model., Conclusions: Eyes affected by CSCR have stiffer corneas, irrespective of thicker scleral thickness. This suggests that stiffer sclera may play a role in the pathogenesis of CSCR., (© 2024. The Author(s).)

Prcis: Corneal hysteresis (CH) and pulsatile ocular blood volume (POBV) were significantly lower in the eye with greater damage in asymmetric glaucoma, without a difference in intraocular pressure (IOP) or central corneal thickness (CCT), and no difference in elastic parameters., Objective: To compare biomechanical and vascular metrics between the eyes of patients with asymmetric glaucoma (ASYMM) and those with symmetric glaucoma (SYMM)., Patients and Methods: Forty-five patients were prospectively recruited and divided into ASYMM, defined as cup-to-disc (C/D) ratio difference >0.1 between eyes and SYMM, with C/D difference ≤0.1. For ASYMM, the smaller C/D was defined as the best eye ("best") and the fellow eye was defined as the worst eye ("worse"). All metrics were subtracted as "worse" minus "best," including the viscoelastic parameter CH, and elastic parameters from the Corvis ST, including stiffness parameter at first applanation, stiffness parameter at highest concavity, integrated inverse radius, deformation amplitude ratio, IOP, CCT, mean deviation (MD), ganglion cell complex (GCC), and POBV were included. Paired t tests were performed between eyes in both groups. Statistical analyses were performed with SAS using a significance threshold of P <0.05., Results: For ASYMM (16 patients), "worse" showed significantly lower CH (-0.76 ± 1.22), POBV (-0.38 ± 0.305), MD (-3.66 ± 6.55), and GCC (-7.9 ± 12.2) compared with "best." No other parameters were significantly different. For SYMM (29 patients), there were no significantly different metrics between eyes., Conclusions: Lower CH, POBV, GCC, and worse MD were associated with greater glaucomatous damage in asymmetric glaucoma without a difference in IOP or CCT. Lower CH and GCC are consistent with previous studies. POBV, a new clinical parameter that may indicate reduced blood flow, is also associated with greater damage., Competing Interests: Disclosure: C.J.R. is a consultant to Oculus Optikgeräte GmbH and Ziemer Ophthalmic Systems AG. The remaining authors declare no conflict of interest., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Purpose: To compare the effects of three common refractive surgeries on corneal biomechanics., Methods: Two hundred seven patients who had refractive surgery were included in this study, of whom 65 received transepithelial photorefractive keratectomy (tPRK), 73 received femtosecond laser-assisted laser in situ keratomileusis (FSLASIK), and 69 received small incision lenticule extraction (SMILE). Each patient had biomechanical measurements using the Corvis ST (Oculus Optikgeräte GmbH) preoperatively and at 3 and 6 months postoperatively. The measurements included five parameters expected to be associated with corneal biomechanics: deformation amplitude ratio at 2 mm (DAR2), integrated inverse radius (IIR), stiffness parameter at first applanation (SP-A1), highest concavity time (HCT), and the updated stress-strain index (SSIv2). The variations in these parameters postoperatively among the three surgeries, and their relationship with corneal thickness (CCT) and intraocular pressure measured by the Dynamic Contour Tonometer (DCT-IOP) were analyzed., Results: SP-A1 decreased significantly from preoperatively to 3 months postoperatively in all three groups, whereas DAR2 and IIR increased significantly, all indicating stiffness losses. Between 3 and 6 months postoperatively, the results were inconsistent, with DAR2 decreasing (indicating stiffness increases) and IIR increasing (denoting stiffness decreases) in the FS-LASIK and SMILE groups. The decrease in SSIv2 (the only measure of corneal material stiffness) postoperatively was comparatively less pronounced at both 3 and 6 months postoperatively. On the other hand, HCT remained generally stable after all three surgeries. Unlike DAR2, IIR, and SP-A1, the changes postoperatively in stiffness parameters HCT and SSIv2 were independent of the corresponding changes in both DCT-IOP and CCT., Conclusions: Among the stiffness parameters considered, SSIv2 was not correlated with CCT or DCT-IOP, and holds promise for representing the corneal material stiffness and how it remains largely unaffected by refractive surgeries. Overall, FS-LASIK had the most significant impact on corneal stiffness, followed by SMILE, and finally tPRK. [ J Refract Surg . 2024;40(5):e344-e352.] .

Background: The human nail has a three-layered structure. Although it would be useful to quantitatively evaluate the changes in deformability of the nail due to various surface treatments, few studies have been conducted., Methods: The effects of two types of surface treatment-a chemically acting nail softener and a physically acting nail strengthener-on the deformability of human fingernails were investigated. The Young's modulus of each plate of the nail samples before and after softening treatment was determined by nanoindentation. The Young's modulus of the strengthener was determined by conducting a three-point bending test on a polyethylene sheet coated with the strengthener., Results: Young's modulus decreased in order from the top plate against the softening treatment time, and the structural elasticity for bending deformation (SEB) of the nail sample, which expresses the deformability against bending deformation independent of its external dimensions, decreased to 60% after 6 h of treatment. The Young's modulus of the nail strengthener was 244.5 MPa, which is less than 10% of the SEB of the nail. When the nail strengthener was applied to the nail surface, the SEB decreased to 73%, whereas the flexural rigidity increased to 117%., Conclusion: Changes in nail deformability caused by various surface treatments for softening and hardening were quantitatively evaluated successfully., (© 2024 The Authors. Skin Research and Technology published by John Wiley & Sons Ltd.)

Purpose: We evaluated changes in ocular and periocular elasticity by ultrasound (US) elastography in intravitreal ranibizumab-treated eyes and the healthy fellow eyes of patients with neovascular AMD., Methods: The study was performed on 52 eyes of 26 volunteers who ranged in age from 59 to 89 (mean 72±7.78) years old. The study group consisted of the patients with neovascular AMD treated with intravitreal ranibizumab. The fellow eyes (without choroidal neovascularization) of the study group were selected as the control group. All patients were examined with sonoelastography before intravitreal injection and at 1day, 1week, and 1month after intravitreal injection. All images were acquired with a Toshiba Aplio 500 ultrasound system (Tokyo, Japan) including software with a combined autocorrelation method and a multifrequency linear probe. The elastography values of the anterior vitreous (AV), posterior vitreous (PV), retina-choroid-sclera complex (RCS), retrobulbar fat tissue (RF), optic nerve head (ONH) and retrobulbar optic nerve (RON) were measured in each eye., Results: There were 13 male (50%) and 13 female (50%) participants in our study. Anterior vitreous, posterior vitreous, RCS, retrobulbar fat tissue, ONH, and RON US elastography values were similar in both groups (P˃0.05 for all). On the other hand, there was a positive correlation between the difference between baseline and 1-month PV sonoelastography values and age (r=0.47, P=0.035)., Conclusion: A single dose intravitreal Ranibizumab (Lucentis®, Genentech, USA) injection does not alter the elasticity of ocular and periocular structures., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

Objective: Impaired arterial elastic features is one of the earliest manifestations of atherosclerosis in the vessel wall and is associated with the development of cardiovascular disease and increased mortality and morbidity. In this study, we aimed to investigate the mean values of aortic elasticity parameters in a normotensive population with transthoracic echocardiography and to evaluate these values in different age groups and their relationship with other risk factors., Methods: This retrospective study included 405 subjects who met the inclusion criteria among 2880 individuals screened between 2020 and 2022. The study population was divided into 5 groups according to their age. Aortic elasticity parameters (aortic strain, aortic stiffness index, and aortic distensibility) were calculated from the associated formulas by measurements made from the ascending aorta in the parasternal long axis., Results: In 405 subjects (mean age 42.18 ± 10.39, 54.3% female), the mean aortic strain value was 15.14 ± 3.56%, the mean aortic stiffness index was 3.24 ± 1.05, and the mean aortic distensibility was 7.48 ± 2.36 cm2/dyn1/103. It was observed that aortic strain and distensibility values significantly decreased with increasing age groups, while aortic stiffness significantly increased. All 3 aortic elasticity parameters were strongly correlated to age. In the multivariate linear regression analysis, age was found to be an independent factor for all aortic elasticity parameters., Conclusion: Aortic elasticity parameters can be evaluated with transthoracic echocardiography in daily practice. Comparing these measurements with normal values in similar age groups may help to detect patients with increased cardiovascular risk in the early period, regardless of the other risk factors.

Extracellular matrix (ECM) has been implicated in tumor progress and chemosensitivity. Ovarian cancer brings a great threat to the health of women with a significant feature of high mortality and poor prognosis. However, the potential significance of matrix stiffness in the pattern of long non-coding RNAs (lncRNAs) expression and ovarian cancer drug sensitivity is still largely unkown. Here, based on RNA-seq data of ovarian cancer cell cultured on substrates with different stiffness, we found that a great amount of lncRNAs were upregulated in stiff group, whereas SNHG8 was significantly downregulated, which was further verified in ovarian cancer cells cultured on polydimethylsiloxane (PDMS) hydrogel. Knockdown of SNHG8 led to an impaired efficiency of homologous repair, and decreased cellular sensitivity to both etoposide and cisplatin. Meanwhile, the results of the GEPIA analysis indicated that the expression of SNHG8 was significantly decreased in ovarian cancer tissues, which was negatively correlated with the overall survival of patients with ovarian cancer. In conclusion, matrix stiffening related lncRNA SNHG8 is closely related to chemosensitivity and prognosis of ovarian cancer, which might be a novel molecular marker for chemotherapy drug instruction and prognosis prediction.

Regulatory T cells (Tregs) provide an essential tolerance mechanism to suppress the immune response. Induced Tregs hold the potential to treat autoimmune diseases in adoptive therapy and can be produced with stimulating signals to CD3 and CD28 in presence of the cytokine TGF-β and IL-2. This report examines the modulation of human Treg induction by leveraging the ability of T cells to sense the mechanical stiffness of an activating substrate. Treg induction on polyacrylamide gels (PA-gels) was sensitive to the substrate's elastic modulus, increasing with greater material stiffness. Single-cell RNA-Seq analysis revealed that Treg induction on stiffer substrates involved greater use of oxidative phosphorylation (OXPHOS). Inhibition of ATP synthase significantly reduced the rate of Treg induction and abrogated the difference among gels while activation of AMPK (AMP-activated protein kinase) increased Treg induction on the softer sample but not on the harder sample. Treg induction is thus mechanosensitive and OXPHOS-dependent, providing new strategies for improving the production of these cells for cellular immunotherapy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Purpose: The purpose of this study was to evaluate the effect of Descemet membrane endothelial keratoplasty (DMEK) graft storage time on its elastic properties, measured using atomic force microscopy (AFM)., Methods: Twenty human corneas (from 10 donors), unsuitable for transplantation, were obtained from the eye bank (S. Fyodorov Eye Microsurgery State Institution, Moscow). Ten DMEK grafts were prepared and stored in the corneal storage medium, Optisol-GS at 4°C after preparation, and AFM analysis was performed within 12 hours after preparation (group A). Ten paired corneas from the respective donors were stored in Optisol-GS at 4°C for 1 week after preparation before AFM analysis (group B). Data were analyzed using the Hertz model for the evaluation of the Young modulus of elasticity., Results: Force-distance curve analysis showed an increase in the Young modulus of elasticity in group B in comparison with that in group A, and the mean values were 10.4 ± 1.8 kPa and 6.77 ± 2.25 kPa, respectively (P < 0.001). There was no correlation between the Young modulus of elasticity and donor age (r = 0.110, P = 0.644), endothelial cell count (r = -0.145, P = 0.541), and procurement interval (r = 0.14, P = 0.755)., Conclusions: A longer graft storage time in cold storage medium was found to significantly reduce the elasticity of the DMEK graft. Clinically, this could potentially influence the unfolding of the DMEK graft within the anterior chamber during surgery and the postoperative detachment rate., Competing Interests: The authors have no funding or conflicts of interest to disclose., (Copyright © 2021 Wolters Kluwer Health, Inc. All rights reserved.)

Mechanical properties, size and geometry of cells, and internal turgor pressure greatly influence cell morphogenesis. Computational models of cell growth require values for wall elastic modulus and turgor pressure, but very few experiments have been designed to validate the results using measurements that deform the entire thickness of the cell wall. New wall material is synthesized at the inner surface of the cell such that full-thickness deformations are needed to quantify relevant changes associated with cell development. Here, we present an integrated, experimental-computational approach to analyze quantitatively the variation of elastic bending behavior in the primary cell wall of living Arabidopsis (Arabidopsis thaliana) pavement cells and to measure turgor pressure within cells under different osmotic conditions. This approach used laser scanning confocal microscopy to measure the 3D geometry of single pavement cells and indentation experiments to probe the local mechanical responses across the periclinal wall. The experimental results were matched iteratively using a finite element model of the experiment to determine the local mechanical properties and turgor pressure. The resulting modulus distribution along the periclinal wall was nonuniform across the leaf cells studied. These results were consistent with the characteristics of plant cell walls which have a heterogeneous organization. The results and model allowed the magnitude and orientation of cell wall stress to be predicted quantitatively. The methods also serve as a reference for future work to analyze the morphogenetic behaviors of plant cells in terms of the heterogeneity and anisotropy of cell walls., (© American Society of Plant Biologists 2021. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Cells are filled with macromolecules and polymer networks that set scale-dependent viscous and elastic properties to the cytoplasm. Although the role of these parameters in molecular diffusion, reaction kinetics, and cellular biochemistry is being increasingly recognized, their contributions to the motion and positioning of larger organelles, such as mitotic spindles for cell division, remain unknown. Here, using magnetic tweezers to displace and rotate mitotic spindles in living embryos, we uncovered that the cytoplasm can impart viscoelastic reactive forces that move spindles, or passive objects with similar size, back to their original positions. These forces are independent of cytoskeletal force generators yet reach hundreds of piconewtons and scale with cytoplasm crowding. Spindle motion shears and fluidizes the cytoplasm, dissipating elastic energy and limiting spindle recoils with functional implications for asymmetric and oriented divisions. These findings suggest that bulk cytoplasm material properties may constitute important control elements for the regulation of division positioning and cellular organization., Competing Interests: Competing interest statement: A patent on the magnetic method was deposited under the number PCT/EP2021/079072 on October 20, 2021., (Copyright © 2022 the Author(s). Published by PNAS.)

Background: The aim of the research presented here was to find a set of parameters enabling discrimination between three types of fibroblasts, i.e., healthy ones and those derived from two disorders mimicking each other: idiopathic pulmonary fibrosis (IPF), and nonspecific interstitial pneumonia (NSIP)., Methods: The morphology and growth of cells were traced using fluorescence microscopy and analyzed quantitatively using cell proliferation and substrate cytotoxicity indices. The viability of cells was recorded using MTS assays, and their stiffness was examined using atomic force microscopy (AFM) working in force spectroscopy (FS) mode. To enhance any possible difference in the examined parameters, experiments were performed with cells cultured on substrates of different elasticities. Moreover, the chemical composition of cells was determined using time-of-flight secondary ion mass spectrometry (ToF-SIMS), combined with sophisticated analytical tools, i.e., Multivariate Curve Resolution (MCR) and Principal Component Analysis (PCA)., Results: The obtained results demonstrate that discrimination between cell lines derived from healthy and diseased patients is possible based on the analysis of the growth of cells, as well as their physical and chemical properties. In turn, the comparative analysis of the cellular response to altered stiffness of the substrates enables the identification of each cell line, including distinguishing between IPF- and NSIP-derived fibroblasts.

Many extensible tissues such as skin, lungs, and blood vessels require elasticity to function properly. The recoil of elastic energy stored during a stretching phase is provided by elastic fibers, which are mostly composed of elastin and fibrillin-rich microfibrils. In arteries, the lack of elastic fibers leads to a weakening of the vessel wall with an increased risk to develop cardiovascular defects such as stenosis, aneurysms, and dissections. The development of new therapeutic molecules involves preliminary tests in animal models that recapitulate the disease and whose response to drugs should be as close as possible to that of humans. Due to its superior in vivo imaging possibilities and the broad tool kit for forward and reverse genetics, the zebrafish has become an important model organism to study human pathologies. Moreover, it is particularly adapted to large scale studies, making it an attractive model in particular for the first steps of investigations. In this review, we discuss the relevance of the zebrafish model for the study of elastic fiber-related vascular pathologies. We evidence zebrafish as a compelling alternative to conventional mouse models.

Purpose: It is unclear how the iris deforms during changes in pupil size. Here, we report an application of a multi-feature iris tracking method, which we call irissometry, to investigate how the iris deforms and affects the eye position signal as a function of pupil size., Methods: To evoke pupillary responses, we repeatedly presented visual and auditory stimuli to healthy participants while we additionally recorded their right eye with a macro lens-equipped camera. We tracked changes in iris surface structure between the pupil and sclera border (limbus) by calculating local densities (distance between feature points) across evenly spaced annular iris regions., Results: The time analysis of densities showed that the inner regions of the iris stretched more strongly as compared with the outer regions of the iris during pupil constrictions. The pattern of iris densities across eccentricities and pupil size showed highly similar patterns across participants, highlighting the robustness of this elastic property. Importantly, iris-based eye position detection led to more stable signals than pupil-based detection., Conclusions: The iris regions near the pupil appear to be more elastic than the outer regions near the sclera. This elastic property explains the instability of the pupil border and the related position errors induced by eye movement and pupil size in pupil-based eye-tracking. Tracking features in the iris produce more robust eye position signals. We expect that irissometry may pave the way to novel eye trackers and diagnostic tools in ophthalmology.

Countless biophysical studies have sought distinct markers in the cellular mechanical response that could be linked to morphogenesis, homeostasis, and disease. Here, an iterative-fitting methodology visualizes the time-dependent viscoelastic behavior of human skin cells under physiologically relevant conditions. Past investigations often involved parameterizing elastic relationships and assuming purely Hertzian contact mechanics, which fails to properly account for the rich temporal information available. We demonstrate the performance superiority of the proposed iterative viscoelastic characterization method over standard open-search approaches. Our viscoelastic measurements revealed that 2D adherent metastatic melanoma cells exhibit reduced elasticity compared to their normal counterparts-melanocytes and fibroblasts, and are significantly less viscous than fibroblasts over timescales spanning three orders of magnitude. The measured loss angle indicates clear differential viscoelastic responses across multiple timescales between the measured cells. This method provides insight into the complex viscoelastic behavior of metastatic melanoma cells relevant to better understanding cancer metastasis and aggression., (© 2022. The Author(s).)

The viscoelastic properties of red blood cells (RBC) facilitate flexible shape change in response to extrinsic forces. Their viscoelasticity is intrinsically linked to physical properties of the cytosol, cytoskeleton, and membrane-all of which are highly sensitive to supraphysiological shear exposure. Given the need to minimise blood trauma within artificial organs, we observed RBC in supraphysiological shear through direct visualisation to gain understanding of processes leading to blood damage. Using a custom-built counter-rotating shear generator fit to a microscope, healthy red blood cells (RBC) were directly visualised during exposure to different levels of shear (10-60 Pa). To investigate RBC morphology in shear flow, we developed an image analysis method to quantify (a)symmetry of deforming ellipsoidal cells-following RBC identification and centroid detection, cell radius was determined for each angle around the circumference of the cell, and the resultant bimodal distribution (and thus RBC) was symmetrically compared. While traditional indices of RBC deformability (elongation index) remained unaltered in all shear conditions, following ~100 s of exposure to 60 Pa, the frequency of asymmetrical ellipses and RBC fragments/extracellular vesicles significantly increased. These findings indicate RBC structure is sensitive to shear history, where asymmetrical morphology may indicate sublethal blood damage in real-time shear flow., (© 2021. The Author(s).)

Purpose: Fine focusing of light by the eye lens onto the retina relies on the ability of the lens to change shape during the process of accommodation. Little is known about the cellular structures that regulate elasticity and resilience. We tested whether Eph-ephrin signaling is involved in lens biomechanical properties., Methods: We used confocal microscopy and tissue mechanical testing to examine mouse lenses with genetic disruption of EphA2 or ephrin-A5., Results: Confocal imaging revealed misalignment of the suture between each shell of newly added fiber cells in knockout lenses. Despite having disordered sutures, loss of EphA2 or ephrin-A5 did not affect lens stiffness. Surprisingly, knockout lenses were more resilient and recovered almost completely after load removal. Confocal microscopy and quantitative image analysis from live lenses before, during, and after compression revealed that knockout lenses had misaligned Y-sutures, leading to a change in force distribution during compression. Knockout lenses displayed decreased separation of fiber cell tips at the anterior suture at high loads and had more complete recovery after load removal, which leads to improved whole-lens resiliency., Conclusions: EphA2 and ephrin-A5 are needed for normal patterning of fiber cell tips and the formation of a well-aligned Y-suture with fiber tips stacked on top of previous generations of fiber cells. The misalignment of lens sutures leads to increased resilience after compression. The data suggest that alignment of the Y-suture may constrain the overall elasticity and resilience of the lens.

Background: Hypospadias is a relatively common genital anomaly in humans, usually followed by inelastic dartos that causes penile chordee. Vascular endothelial growth factor (VEGF) is strongly linked to the viscoelasticity of tissues and their elastic phase. This study aimed to evaluate VEGF expressions in (1) fascia dartos between hypospadias and controls and (2) chordee severity., Methods: This prospective cohort study involved 65 specimens from patients with hypospadias and ten specimens from controls. The samples were analyzed by quantitative real-time polymerase chain reaction (qPCR) for VEGF expression., Results: The expressions of VEGF were not different between proximal and distal hypospadias patients and controls (fold change: distal - 0.25; fold change: proximal - 0.2; p = 0.664). The scaled expressions related to chordee severity were mild - 0.1; moderate 0.1; severe - 0.25 (p = 0.660)., Conclusions: VEGF expressions might not affect the severity of hypospadias and chordee, implying the pathogenesis is complex involving many growth factors. Further study with a larger sample size is necessary to clarify and confirm our findings., (© 2021. The Author(s).)

Mechanical stiffness is closely related to cell adhesion and rounding in some cells. In leukocytes, dephosphorylation of ezrin/radixin/moesin (ERM) proteins is linked to cell adhesion events. To elucidate the relationship between surface stiffness, cell adhesion, and ERM dephosphorylation in leukocytes, we examined the relationship in the myelogenous leukemia line, KG-1, by treatment with modulation drugs. KG-1 cells have ring-shaped cortical actin with microvilli as the only F-actin cytoskeleton, and the actin structure constructs the mechanical stiffness of the cells. Phorbol 12-myristate 13-acetate and staurosporine, which induced cell adhesion to fibronectin surface and ERM dephosphorylation, caused a decrease in surface stiffness in KG-1 cells. Calyculin A, which inhibited ERM dephosphorylation and had no effect on cell adhesion, did not affect surface stiffness. To clarify whether decreasing cell surface stiffness and inducing cell adhesion are equivalent, we examined KG-1 cell adhesion by treatment with actin-attenuated cell softening reagents. Cytochalasin D clearly diminished cell adhesion, and high concentrations of Y27632 slightly induced cell adhesion. Only Y27632 slightly decreased ERM phosphorylation in KG-1 cells. Thus, decreasing cell surface stiffness and inducing cell adhesion are not equivalent, but these phenomena are coordinately regulated by ERM dephosphorylation in KG-1 cells., (© 2021. Japan Human Cell Society.)

Purpose: To evaluate the correlations between corneal biomechanical indices from dynamic Scheimpflug assessment and optical quality assessed as higher-order aberrations (HOAs) using a Hartmann-Shack ocular wavefront sensor in patients with keratoconus (KC)., Methods: In this prospective, observational case series, the eyes with KC or KC suspect (KCS) from Osaka University Hospital, Osaka, Japan, were analyzed. Corneal biomechanical assessment was performed using Corvis ST (Oculus Optikgeräte GmbH, Wetzlar, Germany), and ocular wavefront aberrations were measured using the KR-1W (Topcon Corp, Tokyo, Japan). Correlations between the biomechanical indices and ocular HOAs were assessed. Corneal biomechanical indices included the deformation amplitude ratio within 2 mm, integrated radius, stiffness parameter at the first applanation, and the linear Corvis Biomechanical Index. Wavefront data of the central 4-mm region were expanded up to the sixth order of Zernike polynomials. The magnitudes of trefoil, coma, tetrafoil, secondary astigmatism, and spherical aberration were calculated by Zernike vector analysis and then used as ocular HOA parameters along with total HOAs., Results: Thirty-four KC eyes and 37 KCS eyes were included. KC eyes showed significant correlations between ocular HOAs and biomechanics, whereas there were few significant correlations in KCS eyes. In KC eyes, deformation amplitude ratio within 2 mm, integrated radius, and Corvis Biomechanical Index beta showed stronger correlations with coma among the wavefront parameters., Conclusions: Corneal biomechanical indices correlated with ocular HOAs in patients with KC. In particular, there was a strong association with the increase in coma caused by inferosuperior asymmetry of the shape of the cornea in patients with KC., Competing Interests: R. Inoue is an employee of SEED CO., LTD. S. Koh and N. Maeda received fees from Oculus for a sponsored seminar not related to this article. R. Ambrósio is a consultant for Oculus. The remaining authors have no conflicts of interest to disclose., (Copyright © 2020 Wolters Kluwer Health, Inc. All rights reserved.)

Purpose : To assess the safety and long-term scleral biomechanical stability of rhesus eyes after blue light scleral CXL by investigating the biomechanical and microstructural changes. Methods : Seven rhesus monkeys (14 eyes) were observed in this study. All right eyes received blue light scleral CXL at the superior temporal equatorial sclera, and the left eyes served as controls. Biological ocular parameters were followed up to 1 year after scleral CXL. Stress-strain measurements of three rhesus sclera were measured, three rhesus retinas were examined histologically by H&E and TUNEL staining. And the microstructure of both the sclera and retina were observed by transmission electron microscopy at 1 year. Results : As for the retinal thickness, choroidal thickness, flow density of retinal superficial vascular networks and flash electroretinography (f-ERG) results, no significant differences were observed between the paired eyes at 1 year ( P >.05). At the same time, the scleral collagen fibril distribution was much tighter, and the scleral biomechanical properties were significantly increased in the experimental eyes. However, apoptotic cells and retinal ultrastructural changes could still be found in the retina of the experimental eyes. Conclusion : This study demonstrates that blue light scleral CXL could effectively increase the scleral stiffness of the rhesus eye for at least 1 year, but ultrastructural change was still observed in the retina of scleral CXL eye. Therefore, the long-term intraocular safety of the blue light scleral CXL technique for preventing myopia progression should be investigated further.

The objective of this study is to assess the change in the normal MD elasticity using shear wave elastography (SWE) through measuring the middle deltoid (MD) elasticity in healthy participants at various arm abduction (with bilateral arms at 0 degrees abduction and 90 degrees active abduction) and analyzing the factors affecting normal MD elasticity. Mean shear wave velocity (SWV) of the MD in healthy right-handed participants were evaluated using SWE at different arm abduction, and potential factors (gender, MD thickness, age, body mass index) affecting MD elasticity were analyzed. Different arm abduction positions of each participant were as follows: (i) 0° abduction of bilateral arm (L0° and R0°), (ii) 90° active abduction of bilateral arm (L90° and R90°). Mean SWV was significantly higher at L90° than L0°, higher at R90° than R0°, higher at R0° than L0°, and higher at R90° than L90° (all P < 0.0001). SWV was significantly higher in males at both L0° (P < 0.05) and R0° (P < 0.01) than in females. Neither MD thickness, age nor body mass index influenced MD elasticity. Reference ranges of normal MD elasticity were 2.4-3.1 m/s in males and 2.2-2.9 m/s in females at L0° and 2.5-3.3 m/s in males and 2.4-3.2 m/s in females at R0°, and were 4.9-6.7 m/s at L90°, 5.2-7.1 m/s at R90° for both males and females. SWE is a feasible technique to assess normal MD elasticity at various arm abduction. Our results suggest that normal MD elasticity at L0°, R0°, L90°, and R90° with SWE are different. Moreover, these reference ranges may serve as quantitative baseline measurements for assessment of normal MD elasticity in the future.

Although collagen based materials are widely used in corneal tissue engineering with promising results. The usage of such materials for the improvement of corneal biomechanical properties is still unclear. In this study, we aimed to investigate a new Viscoll collagen-based membrane for the improvement of corneal biomechanical characteristics.The right eyes of 15 Chinchilla rabbits were implanted with the membrane via an intrastromal pocket, with the contralateral intact eyes as controls. At 7, 30, 90, and 180 days post-surgery, the rabbits underwent anterior segment optical coherence topography, clinical examination, and slit-lamp microscopy. Additionally, the corneal samples also underwent histological examination followed by the assessment of the biomechanical characteristics of four treated and non-treated corneas at 30, 90, and 180 days, including keratometry at 180 days, post operation. Data are presented as means ± confidence intervals with a 95% confidence level. All the operated corneas retained their transparency throughout the study. Implantation approximately doubled the central corneal thickness. Corneas became stronger by approximately 87% between 1 and 6 months after surgery (maximum fracture load, 13.3 ± 0.8 and 24.9 ± 1.4 N, respectively), and their elasticity increased by approximately 27% over the same time frame (maximum slope of the elastic region of the stress-strain curve, 11.5 ± 0.2 and 14.6 ± 1.4 N/mm respectively). We have thus proposed a new method to increase corneal thickness and strengthen the corneal tissues while preserving their transparency and demonstrated its safety and efficacy in a rabbit model over 6 months. This may be a suitable alternative to the existing corneal collagen crosslinking procedure., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Introduction: Biomechanical evaluation of the viscoelastic properties tissue deformation, stiffness, and maximum breaking load of the human A2 pulley. We hypothesized that the A2 pulleys of index, middle, and ring fingers exhibit no difference regarding the aforementioned biomechanical parameters., Methods: Forty-one A2 pulleys of 14 upper extremities (8 body donors) were assessed. Cyclic and load-to-failure testing were performed. The biomechanical parameters tissue deformation during cyclic and load-to-failure testing, stiffness, and maximum breaking load were determined., Results: No significant differences between the fingers could be detected regarding the biomechanical parameters. A significant negative correlation could be detected between stiffness and deformation of the pulley. Significant positive correlations could be identified between stiffness and maximum breaking load and between maximum breaking load and deformation of the pulleys., Conclusions: Assessment of the viscoelastic properties of the A2 finger pulley promotes precise diagnosis of pulley lesions and will help to optimize treatment.

Vascular dysfunctions, including arterial stiffness and endothelial dysfunction, are prevalent in hypertensive subjects. We aimed to study their relations to subclinical intracranial vascular health in this study. A total of 200 older hypertensive males without overt cardiovascular or cerebrovascular diseases were recruited. Arterial elasticity was measured as carotid-femoral pulse wave velocity (cfPWV) and endothelial function was measured as digital reactive hyperemia index (RHI). Cerebrovascular health was evaluated using MRI in four aspects: intracranial atherosclerosis, brain perfusion as cerebral blood flow (CBF), vascular rarefaction analyzed as visible arterial branches on angiography using a custom-developed analysis technique and small vessel disease measured as white matter hyperintensity (WMH). There was a significant negative association between cfPWV and CBF, suggesting a link between arterial stiffness and CBF decline. Higher cfPWV was also associated with presence of intracranial stenotic plaque and greater WMH volume. RHI was positively related to CBF, indicating that endothelial dysfunction was associated with reduced CBF. All the associations remained significant after adjustment for confounding variables. Arterial stiffness and endothelial dysfunction are associated with reduced brain perfusion in older hypertensive males. Arterial stiffness is also associated with global cerebral vascular injury, affecting both small and medium-to-large arteries.

Purpose: To investigate the relationship between biomechanical glaucoma factor (BGF) measured with Corvis ST and glaucomatous visual field (VF) progression, compared to corneal hysteresis (CH) measured with ocular response analyzer using a longitudinal dataset of primary open-angle glaucoma (POAG). The discriminative powers of BGF and CH were also compared using a cross-sectional dataset., Methods: The longitudinal dataset included 166 POAG eyes. The rate of VF change during the follow-up period was evaluated using the mean of 52 pointwise total deviations in the Humphrey 24-2 field test. Variables associated with the VF progression rate were identified from BGF, CH, age, baseline VF severity, and intraocular pressure during the VF follow-up period by identifying the optimal model. The cross-sectional dataset included 68 POAG eyes and 68 healthy eyes. Using this dataset, the area under the curve (AUC) values of the receiver-operating curve were compared between CH and BGF., Results: The optimal multivariate linear mixed model to describe the VF rate included age and CH, but not BGF. Between POAG and healthy eyes, CH was statistically different (P < 0.001), although this was not the case with BGF. The AUC values were 0.61 and 0.71 for BGF and CH, respectively (P = 0.027)., Conclusions: CH, but not BGF, was associated with VF progression in POAG patients under treatment. BGF was not useful to discriminate POAG between treated and normal eyes.

During cell migration in confinement, the nucleus has to deform for a cell to pass through small constrictions. Such nuclear deformations require significant forces. A direct experimental measure of the deformation force field is extremely challenging. However, experimental images of nuclear shape are relatively easy to obtain. Therefore, here we present a method to calculate predictions of the deformation force field based purely on analysis of experimental images of nuclei before and after deformation. Such an inverse calculation is technically non-trivial and relies on a mechanical model for the nucleus. Here we compare two simple continuum elastic models of a cell nucleus undergoing deformation. In the first, we treat the nucleus as a homogeneous elastic solid and, in the second, as an elastic shell. For each of these models we calculate the force field required to produce the deformation given by experimental images of nuclei in dendritic cells migrating in microchannels with constrictions of controlled dimensions. These microfabricated channels provide a simplified confined environment mimicking that experienced by cells in tissues. Our calculations predict the forces felt by a deforming nucleus as a migrating cell encounters a constriction. Since a direct experimental measure of the deformation force field is very challenging and has not yet been achieved, our numerical approaches can make important predictions motivating further experiments, even though all the parameters are not yet available. We demonstrate the power of our method by showing how it predicts lateral forces corresponding to actin polymerisation around the nucleus, providing evidence for actin generated forces squeezing the sides of the nucleus as it enters a constriction. In addition, the algorithm we have developed could be adapted to analyse experimental images of deformation in other situations., Competing Interests: The authors have declared that no competing interests exist.

Abstract: There is evidence that serum 25-hydroxyvitamin D [25-(OH) D] levels may be associated with cardiovascular disease and its risk factors. This study aimed to investigate the relationship between 25-(OH) D levels and blood pressure (BP), blood lipids, and arterial elasticity in middle-aged and elderly cadres in China.In this retrospective study, we included 401 civil servants and cadres aged >42 years who underwent medical examinations at Guiyang Municipal First People's Hospital, China in 2018. The participants were assigned to deficiency (≤20 ng/mL), insufficiency (20-30 ng/mL), and sufficiency (≥30 ng/mL) groups according to 25-(OH) D levels in their blood. Demographics, brachial-ankle pulse wave velocity (baPWV), BP, ankle-brachial index (ABI), and blood lipids were compared among groups. The associations between 25-(OH) D and other parameters were evaluated using linear regression analysis.Median (range) 25-(OH) D levels in the deficiency (n = 162), insufficiency (n = 162), and sufficiency (n = 77) groups were 15.32 (2.93-19.88), 25.12 (20.07-29.91), and 33.91 (30.23-82.42) ng/mL, respectively. There were significant differences in systolic BP, pulse pressure, baPWV (left and right sides), ABI (left side), high-density lipoprotein-cholesterol, and triglycerides (TGs; all P < .05) among groups. Multivariate linear regression revealed that TG, left baPWV, and right baPWV were significantly negatively correlated with 25-(OH) D levels (all P < .05).In this study, 25-(OH) D levels were found to be associated with TG, left baPWV, and right baPWV values. 25-(OH) D deficiency may be associated with reduced arterial elasticity., Competing Interests: The authors have no conflicts of interests to disclose., (Copyright © 2021 the Author(s). Published by Wolters Kluwer Health, Inc.)