Search

We studied the adsorption of bovine serum albumin (BSA) from phosphate-buffered saline (pH 7.4) to hydrophilic and hydrophobic surfaces. Attenuated total reflection Fourier transform infrared spectroscopy, supported by spectral simulation, allowed us to determine with high precision the amount of BSA adsorbed (surface coverage) and its structural composition. The adsorbed BSA molecules had an alpha-helical structure on both hydrophobic and hydrophilic surfaces but had different molecular conformations and adsorption strengths on the two types of surface. Adsorption of BSA was saturated at around 50% surface coverage on the hydrophobic surface, whereas on the hydrophilic surface the adsorption reached 95%. The BSA molecules adsorbed to the hydrophilic surface with a higher interaction strength than to the hydrophobic surface. Very little adsorbed BSA could be desorbed from the hydrophilic surface, even using 0.1 M sodium dodecyl sulfate, a strong detergent solution. The formation of BSA-phosphate surface complexes was observed under different BSA adsorption conditions on hydrophobic and hydrophilic surfaces. The formation of these complexes correlated with the more efficient blocking of nonspecific interactions by the adsorbed BSA layer. Results from the molecular modeling of BSA interactions with hydrophobic and hydrophilic surfaces support the spectroscopic findings.

In situ qualitative and quantitative evaluations of adsorbed submonolayers and multilayers of the protein Concanavalin A (ConA) on a polystyrene surface were carried out by attenuated total reflection infrared spectroscopy. The influence of pH and adsorption time on the composition and structure of the adsorbed protein layers was investigated by comparison of the experimental spectra with simulated spectra of hypothetical multilayer systems with the assumed composition, thickness, and structure. This methodology allows the differentiation of observed spectral changes that result from pure optical effects, associated with the passing of an incident beam through the multilayer system, from the chemical and structural changes caused by physicochemical interactions of proteins with polymer surfaces. This represents significant progress since small variations in the band positions or intensities of amide I and amide II infrared absorbance bands have an important interpretation consequence. The applied methodology significantly reduces the misinterpretation of recorded spectra of protein layers and is rewarded by a deep insight of the structure and composition of the samples. The composition, structure, and kinetics of the adsorption of ConA and hydration level of the adsorbed layers were evaluated in detail. Competitive adsorption of bovine serum albumin on pre-adsorbed ConA layers also was investigated to characterize the ConA surface distribution. Parallel studies using X-ray photoelectron spectroscopy support the conclusions drawn from infrared spectroscopic investigations on ConA molecular distributions at the polymer surface. Two-step models that describe ConA submonolayer formation at pH 4.8 and multilayer formation at pH 7.8 are proposed.

Amphiphilic copolymers of a methacrylic monomer (SiMA) carrying a polysiloxane side chain and an acrylic monomer (ZA) with a mixed poly(ethylene glycol) (PEG)-fluoroalkyl side chain (10–85 mol % ZA) were incorporated as the surface-active components into poly(dimethylsiloxane) (PDMS) network blends at different loadings (1 and 4 wt % with respect to PDMS). Wettability of the coating surfaces was investigated by contact angle measurements, and their surface chemical composition was determined by angle-resolved X-ray photoelectron spectroscopy. It was found that the surface segregation of the fluoroalkyl segments of the amphiphilic copolymers was responsible for the high enrichment in fluorine concentration within 10 nm of the coating surface. The PEG segments were also concentrated at the polymer−air interface. The chemical composition of the films was proven to be relatively little affected by immersion in water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012

Herein, we report our analysis of the surface modification of polystyrene (PS) when treated under ambient conditions with a common biological buffer such as phosphate buffered saline (PBS) or aqueous solutions of the ionic constituents of PBS. Attenuated total reflection Fourier transform infrared spectroscopy was used for the analysis because the resultant spectra are very sensitive to minor changes in the chemical and structural properties of PS films. In addition, ultraviolet–visible spectroscopy was applied to characterize the surface modifications of PS. Treatment with PBS resulted in the most significant chemical and structural surface modifications of the PS films, as compared with each of the solutions of the constituents of PBS, which were tested separately. A multistep mechanism for the wet modification of PS is discussed. We postulate that the observed surface modifications are the result of photo-oxidation/reduction, swelling, and conformational changes and re-arrangement of the polymer chain. The resultant surface modifications could be similar to those produced by commonly used dry processes such as plasma treatments and electron, ion or ultraviolet irradiation. We found that the modifications that occurred in PBS were more stable than those initiated by dry processes. The formation of active groups on the surface of PS can be controlled by adsorption of bovine serum albumin or thermal annealing of PS before PBS treatment. This approach provides a simple and efficient method for the surface modification of PS for biomedical applications.

Two fluorinated/siloxane copolymers, O5/19 and D5/3, carrying 6 and 8 CF(2) groups in the fluoroalkyl tail, respectively, were used as the surface-active components of cured poly(dimethylsiloxane) (PDMS) blends at different loadings (0.3-5.0 wt % with respect to PDMS). The surface chemical composition was determined by angle-resolved X-ray photoelectron spectroscopy at the takeoff angles theta of 0 degrees, 60 degrees, and 75 degrees. It was found that the fluorinated copolymer was surface-segregated, and in-depth segregation (approximately 5 nm) depended upon the chemical structure of the copolymer. The surface fluorine atomic percentage of the blends with D5/3 was up to 3 orders of magnitude higher than the theoretical value expected for ideal homogeneous samples. Moreover, small amounts of the copolymer in the blends were sufficient to saturate the outermost surface in fluorine content. The chemical composition of the surface-segregated nanostructure of the films was also proven to be affected by external environment, namely, exposure to water.

The adsorption of Concanavalin A (Con A) through pH cycle (pH 4.8–7.4–4.8) on germanium substrate was studied in situ by attenuated total reflection infrared (ATR-IR) spectroscopy. The qualitative and quantitative evaluation of the adsorbed protein layers was performed by the comparison of experimental spectra with simulated spectra of hypothetical surface layers using assumed parameters, such as composition, thickness, and structure of adsorbed layers. The results show that Con A readily adsorbs from phosphate-buffered saline, forming close to monolayer coverage on the surface of germanium covered with native oxide after short-time contact. Further adsorption was found to be pH dependent, and it is irreversible to pH changes. It was identified that the adsorption process is not solely electrostatically controlled. Protein–protein interaction by hydrogen bonding or hydrophobic interaction may dominate the adsorption process. The hydration of absorbed Con A layer at different pH was evaluated. The washing experiments with water and various electrolyte solutions confirmed physisorption of Con A on germanium surface. The experimental methodology using spectral simulation was proven to provide a deeper insight into the structure, composition, and hydration level of the produced protein coatings.

The efficiency of a pre-absorbed bovine serum albumin (BSA) layer in blocking the non-specific adsorption of different proteins on hydrophobic and hydrophilic surfaces was evaluated qualitatively and quantitatively using infrared reflection spectroscopy supported by spectral simulations. A BSA layer with a surface coverage of 35% of a close-packed monolayer exhibited a blocking efficiency of 90-100% on a hydrophobic and 68-100% on a hydrophilic surface, with respect to the non-specific adsorption of concanavalin A (Con A), immunoglobulin G (IgG), and staphylococcal protein A (SpA). This BSA layer was produced using a solution concentration of 1 mg/mL and 30 min incubation time. BSA layers that were adsorbed at conditions commonly employed for blocking (a 12 h incubation time and a solution concentration of 10 mg/mL) exhibited a blocking activity that involved competitive adsorption-desorption. This activity resulted from the formation of BSA-phosphate surface complexes, which correlated with the conformation of adsorbed BSA molecules that was favourable for blocking. The importance of optimisation of the adsorbed BSA layer for different surfaces and proteins to achieve efficient blocking was addressed in this study.