Search

Aims: This study aims at formulating combined delivery of Risedronate sodium (RIS) and Vitamin D3 (VITD3) for augmented therapeutic outcome against osteoporosis (OP) using deep lung targeted PAMAM-G5-NH 2 dendrimers to minimize RIS gastrointestinal side effects and enhance both drugs bioavailability through absorption from the alveoli directly to the blood., Methods: RIS-PAMAM-G5-NH 2 , VITD3-PAMAM-G5-NH 2 , and RIS/VITD3-PAMAM-G5-NH 2 were prepared and evaluated in vitro for particle size (PS), zeta potential (ZP), %loading efficiency (%LE), morphology and FTIR. The efficacy of the RIS/VITD3-PAMAM-G5-NH 2 compared to oral RIS was evaluated in OP-induced rats by comparing serum calcium, phosphorus, and computed bone mineral density (BMD) pre- and post-treatment. Additionally, a comprehensive metabolomics and molecular pathways approach was applied to find serum potential biomarkers for diagnosis and to evaluate the efficacy of inhaled RIS/VITD3-PAMAM-G5-NH 2 ., Key Findings: RIS/VITD3-PAMAM-G5-NH 2 was successfully prepared with a %LE of 92.4 ± 6.7 % (RIS) and 83.2 ± 4.4 % (VIT-D3) and a PS of 252.8 ± 34.1 adequate deep lung delivery. RIS/VITD3-PAMAM-G5-NH 2 inhalation therapy was able to restore serum calcium, phosphorus, and BMD close to normal levels after 21 days of treatment in OP-induced rats. The WNT-signalling pathway and changes in the metabolite levels recovered to approximately normal levels upon treatment. Moreover, histone acetylation of the WNT-1 gene and miR-148a-3p interference proved to play a role in the regulation of the WNT-signalling pathway during OP progression and treatment., Significance: Pulmonary delivery of RIS/VITD3-PAMAM-G5-NH 2 offers superior treatment for OP treatment compared to the oral route. Molecular and Metabolic pathways represents key indicators for OP diagnosis and progression., Competing Interests: Conflict of interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Ciclesonide (CIC), an inhaled corticosteroid for bronchial asthma is currently available as metered dose inhaler (CIC-MDI) which possesses a major challenge in the management of the elderly, critically ill patients and children. In this work, nebulized CIC nano-structure lipid particles (CIC-NLPs) were prepared and evaluated for their deep pulmonary delivery and cytotoxicity to provide additional clinical benefits to patients in controlled manner and lower dose. The bio-efficacy following nebulization in ovalbumin (OVA) induced asthma Balb/c mice compared to commercial (CIC-MDI) was also assessed. The developed NLPs of 222.6 nm successfully entrapped CIC (entrapment efficiency 93.3%) and exhibited favorable aerosolization efficiency (mass median aerodynamic diameter (MMAD) 2.03 μm and fine particle fraction (FPF) of 84.51%) at lower impactor stages indicating deep lung deposition without imparting any cytotoxic effect up to a concentration of 100 μg/ml. The nebulization of 40 µg dose of the developed CIC-NLPs revealed significant therapeutic impact in the mitigation of the allergic airways inflammations when compared to 80 µg dose of the commercial CIC-MDI inhaler (Alvesco ® ). Superior anti-inflammatory and antioxidative stress effects characterized by significant decrease ( p < .0001) in inflammatory cytokines IL-4 and 13, serum IgE levels, malondialdehyde (MDA), nitric oxide (NO), TNF-α, and activated nuclear factor-κB (NF-κB) activity were obvious with concomitant increase in superoxide dismutase (SOD) activity. Histological examination with inhibition of inflammatory cell infiltration in the respiratory tract was correlated well with observed biochemical improvement.

Risedronate sodium (RS) is a potent nitrogen-containing bisphosphonate which is known to induce osteoclast apoptosis. As a drug repurposing approach, the current work explored the potential of nebulizable RS-chitosan (CS) microspheres to induce alveolar macrophage apoptosis. RS-CS microspheres were assessed for lung deposition, cytotoxicity, and cellular uptake percentage in Calu-3 cells. The potential of nebulizable microspheres for treating elastase-induced emphysema in rats was investigated, compared to RS marketed oral tablets®, with respect to histopathological, immunohistochemical, and flow cytometric studies. The in vitro lung deposition pattern suggested deep alveolar deposition of RS microspheres, with respect to high FPF% and suitable MMAD (66% and 1.506 μm, respectively, at a flow rate of 28.3 L min -1 ). No apparent cytotoxicity was observed, with a cell viability > 90%. The inhalation of RS-CS microspheres was suggested to inhibit airspace enlargement and lung rarefaction after elastase instillation and reduce the macrophage accumulation in alveolar parenchyma. Immunohistochemical and cytometric analyses revealed significant low expression levels of CD68 and CD11b surface markers, respectively, with significantly (P < 0.05) lower detected numbers of intact alveolar macrophages following inhalation of RS-CS microspheres. The nebulization of RS-CS microspheres could induce apoptosis in alveolar macrophages and be promisingly adopted for attenuation of pulmonary emphysema.

Risedronate sodium (RS) is a potent inhibitor of bone resorption, having an extreme poor permeability and limited oral bioavailability (0.62%). RS should be orally administered under fasting conditions while keeping in an upright posture for at least 30 min to diminish common gastroesophageal injuries. To surmount such limitations, novel risedronate-chitosan (RS-CS) crosslinker-free nebulizable microspheres were developed adopting the quality by design (QbD) approach and risk assessment (RA) thinking. RS:CS ratio, surfactant (Pluronic® F127) concentration, homogenization duration, speed, and temperature were identified using Ishikawa diagrams as the highest formulation and process risk factors affecting the critical quality attributes (CQAs), average particle size (PS), and entrapment efficiency (EE%). The risk factors were screened using the Plackett-Burman design, and the levels of the most significant factors were optimized using a multilevel factorial design to explore the optimized system with the least PS, maximum EE%, and a prolonged drug release profile. The optimized system (B6) was developed at a RS:CS ratio of 1:7, a surfactant concentration of 2% (w/v), and a homogenization speed of 14,000 rpm. It revealed good correlation with QbD theoretical prediction, where positively charged (47.9 ± 3.39 mV) discrete, spherical microspheres (3.47 ± 0.16 μm) having a high EE% (94.58 ± 0.19%) and prolonged RS release over 12 h (Q 12 h , 89.70 ± 0.64%) were achieved. In vivo lung deposition after intratracheal instillation of B6 confirmed the delivery of high RS percentage to rat lung tissues (87 ± 3.54%) and its persistence for 24 h. This investigation demonstrated the effectiveness of QbD philosophy in developing RS-CS crosslinker-free nebulizable microspheres.

Clopidogrel bisulfate (CB) is a golden antiplatelet treatment, yet its benefits are limited by its low bioavailability (<50%) caused by poor intestinal solubility and absorption. The present study aims to improve CB intestinal solubility and absorption through developing a novel stable dry CB procubosomes tablets ready to disintegrate and re-disperse upon dilution in the GIT forming in situ CB cubosome nanoparticles while simultaneously overcome the poor stability of conventional cubosome dispersion at room temperature. Glyceryl monooleate based CB cubosome dispersion was prepared using Poloxamer 407 as surfactant, freeze dried using different stabilizing excipients (dextrose, mannitol and avicel) then compressed into procubosome tablets. The effect of excipient's physicochemical properties on the flowability, in vitro dissolution and stability at accelerated conditions (40 ± 2 °C/75 ± 5% RH) were evaluated. The prepared procubosomes exhibited an excipient type dependent dissolution profile where Avicel based procubosome tablet CF2 showed the highest in vitro dissolution profile among other excipients used during the freeze drying process. Upon transition to intestinal pH of 6.8 to mimic the drug absorption site, CF2 procubosome Avicel tablet, was able to preserve the enhanced CB release profile (99.6 ± 6.92%) compared to commercial Plavix® where, CB dissolved % dropped dramatically to 79.1 ± 2.45%. After storage for six months, CF2 retained the fresh tablet drug content of 98.5 ± 5.82% and dissolution properties. Moreover, following oral administration in rabbits, CF2 showed higher relative bioavailability (153%) compared to commercial Plavix® with significant higher C max ,shorter t max , as well as enhanced antiplatelet activity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Clopidogrel bisulphate (CB) is a first line antiplatelet drug for treatment of myocardial infarction and stroke. Yet, its efficacy is limited by its poor solubility in intestinal pH, its main site of absorption. The main aim of this study is to enhance the intestinal release of CB by loading in cubosome nanoparticles. Glyceryl monooleate (GMO) based CB loaded cubosomes were prepared using a 3 3 factorial design to study the effect of polyvinyl alcohol (PVA), poloxamer 407 (PL407) concentrations and ratio of CB to the disperse phase on the average particle size, entrapment efficiency (%EE), in vitro release at 15 min (%Q 15 ), and their morphology using transmission electron microscopy (TEM). The release of the optimized formula was compared in buffer transition media (pH 1.2 for 2 h then pH 6.8 for 6 h) to free drug to study the effect of the changing pH in the gastrointestinal tract (GIT) on CB release. The antihaemostatic properties of the optimized formula were compared to the commercial product Plavix ® using bleeding time (BT) model in rabbits. The prepared cubosomes were in the nano range (115±6.47 to 248±4.63 nm) with high %EE (91.22±4.09% to 98.98±3.21%). The optimized formula showed significantly higher (p<0.05) CB release in intestinal pH and preserved the high% released (95.66±1.87%) in buffer transition release study compared to free drug (66.82±4.12%) as well as significantly (p<0.05) higher antihaemostatic properties with longer BT (628.47±6.12 s) compared to Plavix ® (412.43±7.97 s). Thus, cubosomes proved to be a successful platform to enhance the intestinal release of CB and improve its absorption.

Ocular topically applied Vancomycin (VCM) suffers poor bioavailability due to its high molecular weight and hydrophilicity. In the present investigation, VCM-loaded polymeric nanoparticles (PNPs) were developed aiming to enhance its ocular bioavailability through prolonging its release pattern and ophthalmic residence. PNPs were prepared utilizing double emulsion (W/O/O), solvent evaporation technique. 2 3 ×4 1 full factorial design was applied to evaluate individual and combined influences of polymer type, Eudragit® RS100, sonication time, and Span®80 concentration on PNPs particle size, encapsulation efficiency, and zeta potential. Further, the optimized formulae were incorporated in 1% Carbopol®-based gel. In-vivo evaluation of the optimized formulae was performed via Draize test followed by microbiological susceptibility testing on albino rabbits. Results revealed successful formulation of VCM-loaded PNPs was achieved with particle sizes reaching 155nm and up to 88% encapsulation. Draize test confirmed the optimized formulae as non-irritating and safe for ophthalmic administration. Microbiological susceptibility testing confirmed prolonged residence, higher C max. with more than two folds increment in the AUC (0.25-24) of VCM-PNPs over control groups. Thus, VCM-loaded PNPs represent promising carriers with superior achievements for enhanced Vancomycin ophthalmic delivery over the traditional use of commercially available VCM parenteral powder after constitution into a solution by the ophthalmologists., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Context: A microbiological multidistrict-based survey from different Egyptian governorates was conducted to determine the most prevalent causative agents of ocular infections in the Egyptian population. Antibiotic sensitivity testing was then performed to identify the most potent antimicrobial agent. Vancomycin (VCM) proved the highest activity against gram-positive Staphylococcus bacteria, which are the most commonly isolated causative agents of ocular infection. However, topically applied VCM suffers from poor ocular bioavailability because of its high molecular weight and hydrophilicity., Objective: The aim of the present study was to develop VCM-loaded solid lipid nanoparticles (SLNs) using water-in-oil-in-water (W/O/W) double emulsion, solvent evaporation technique to enhance ocular penetration and prolong ophthalmic residence of VCM., Method: Two consecutive full factorial designs (2(4) followed by 3(2)) were adopted to study the effect of different formulation and process parameters on SLN formulation. The lipid type and structure, polyvinyl alcohol (PVA) molecular weight and concentration, sonication time, as well as lipid:drug ratio were studied as independent variables. The formulated SLN formulae were evaluated for encapsulation efficiency (EE%), particle size (PS), and zeta potential as dependent variables., Results: The statistically-optimized SLN formula (1:1 ratio of glyceryltripalmitate:VCM with 1% low molecular weight PVA and 1 min sonication time) had average PS of 277.25 nm, zeta potential of -20.45, and 19.99% drug encapsulation. Scanning and transmission electron micrographs showed well-defined, spherical, homogenously distributed particles., Conclusion: The present study suggests that VCM incorporation into SLNs is successfully achievable; however, further studies with different nanoencapsulation materials and techniques would be valuable for improving VCM encapsulation.

The application of self-nanoemulsified drug delivery system (SNEDDS) to improve bioavailability of diacerein (D) has been hampered by its large dose and limited solubility. This work aimed to prepare diacerein loaded self nanoemulsifying self nanosuspension (D-SNESNS) containing high drug load. D-SNESNS was prepared by homogenizing D into Maisine™-based SNEDDS that gave the highest drug solubility. D-SNESNS was evaluated for particle size, zeta potential and in vitro dissolution. Significant increase of D solubility was observed from D-SNESNS (∼ 309 μg/mL) than traditional SNEDDS (∼162μg/mL) due to the spontaneous simultaneous formation of nanoemulsion and nanosuspension (top-down approach). When exposed to water with mild agitation, the drug microparticles in D-SNESNS are temporarily surrounded by unsaturated aqueous layer (containing optimum concentrations of surfactant and co-solvent) that facilitates the erosion of the suspended drug particles into nanosized ones. Nanoemulsion-based nanosuspension (NENS) was confirmed using transmission electron microscopy and particle size analysis. D-SNESNS equivalent to 50mg D exhibited complete and very rapid dissolution after 15 min in phosphate buffer pH 6.8 due to the existence of D as solubilized molecules inside nanoemulsion globules and nanosized suspended drug particles forming D-NENS. The relative bioavailabilities of rhein from D-SNESNS in rats with normal and blocked chylomicron flow were about 210% and 164%, respectively in comparison to aqueous D suspension. The significant increase in the dissolution, portal absorption and lymphatic delivery of D propose that SNESNS could be promising to improve oral bioavailability of poorly water soluble drugs that have limited drug load in SNEDDS., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The objective of this study was to formulate novel painless combined hyaluronic acid (HA)-ketorolac (KT) membrane for the management of osteoarthritis with rapid analgesic onset, thus avoiding HA frequent invasive intra-articular injections and KT gastrointestinal complaints associated with all non-steroidal anti-inflammatory drugs. HA was chemically crosslinked with carbodiimide/glutaraldehyde to yield membrane of low water content. Different in vitro aspects (mechanical properties, water content and in vitro release) were studied leading to an optimized soft, flexible K8 HA membrane containing 30 mg KT that achieved the desired balance of excellent elasticity and low water content. Moreover, a successful retardation of KT release rate was achieved (82%) after 48 h with favored initial fast drug release in the first hour (32.7%) to attain rapid analgesic effect. The clinical assessments in arthritic rats revealed apparent improvement in joint space narrowing, highest increase in bone mineral density at the proximal tibia and distal femur joints with the absence of osteophytosis only in animal group treated with combined HA-KT membrane. Application of K8 membrane was able to preserve KT plasma concentration above its minimum effective concentration for 48 h therefore, would able to replace six commercial tablets each of 10 mg KT.

In this study, six in situ gelling formulations based on Gelrite were prepared and evaluated for the retained ophthalmic delivery of Moxifloxacin (Mox). The effectiveness of the best developed formula G5 was compared with photodynamic therapy (PDT), the recent expanding approach for the treatment of ophthalmologic disorders after the assessment of optimum photodynamic inactivation parameters that permit efficient pathogens eradication. It was found that, Staphylococcus aureus (S. aureus) (Gram-positive) was more susceptible to effective lethal photosensitization that reaches 93.5% reduction in viable count than Escherichia coli (E. coli) (Gramnegative) of 76.1% using 3 mg/mL Hematoporphyrin (HP), illuminated by 630 nm Light Emitting Diode (LED) at 9 J/cm(2) and incubated for 15 min. Following topical instillation of G5 to rabbits corneas, higher amount of Mox was retained in the aqueous humor up to 24 h with significant 6-fold increase in the C(max) and AUC((0-∞)) compared to vigamox commercial eye drops. After post corneal infection with S. aureus, both approaches were effectively treating the infection without causing ocular irritation or collateral damage to corneal tissue where G5 showed remarkable improvement after four days compared to seven days of PDT treatment.

Vinpocetine (Vin) existing oral formulations suffer poor bioavailability (∼7%) since Vin undergoes a marked first-pass effect (∼75%) and its absorption is dissolution rate-limited. In this study, a novel sustained release proniosomal system was designed using sugar esters (SEs) as non-ionic surfactants in which proniosomes were converted to niosomes upon skin water hydration following topical application under occlusive conditions. Different in vitro aspects (encapsulation efficiency, vesicle size and shape, effect of occlusion, in vitro release, skin permeation and stability) were studied leading to an optimized formula that was assessed clinically for transdermal pharmacokinetics and skin irritation. All formulae exhibited high entrapment efficiencies, regardless of the surfactant HLB. Vesicle size analysis showed that all vesicles were in the range from 0.63 μm to 2.52 μm which favored efficient transdermal delivery. The extent of drug permeation through the skin from the optimized formula--containing laurate SE with shorter fatty acid chain length and high HLB--was quite high (91%) after 48 h under occlusive conditions. The extent of absorption of Vin from proniosomes was larger when compared to the oral tablet with a relative bioavailability (F(rel)) of 206%. Histopathological evaluation revealed only moderate skin irritation when using SEs compared to skin inflammation when using Tween 80. Sugar esters proniosomes may be a promising carrier for vinpocetine, especially due to their simple scaling up and their ability to control drug release., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The demand for sublingual tablets has been growing during the previous decades especially for drugs with extensive hepatic first-pass metabolism. Vinpocetine, a widely used neurotropic agent, has low oral bioavailability due to its poor aqueous solubility and marked first-pass metabolism. Accordingly, the aim of this work was to develop tablets for the sublingual delivery of vinpocetine. Initially, the feasibility of improving vinpocetineâs poor aqueous solubility by preparing kneaded solid systems of the drug with Î-Cyclodextrin and hydroxy acids (citric acid and tartaric acid) was assessed. The solid system with improved solubility and dissolution properties was incorporated into porous tablets that rapidly disintegrate permitting fast release of vinpocetine into the sublingual cavity. The pores were induced into these tablets by directly compressing the tabletsâ excipients with a sublimable material, either camphor or menthol, which was eventually sublimated leaving pores. The obtained results demonstrated that the tablets prepared using camphor attained sufficient mechanical strength for practical use together with rapid disintegration and dissolution. In vivo absorption study performed in rabbits indicated that the sublingual administration of the proposed porous tablets containing vinpocetine solid system with Î-Cyclodextrin and tartaric acid could be useful for therapeutic application.

The feasibility of matrix controlled transdermal patch based on sugar fatty acid ester (SE) as penetration and absorption enhancer containing Timolol maleate (TM) was investigated. The influence of fatty acid type, chain length and hydrophile-lipophile balance (HLB) on the in vitro drug release as well as its permeation across hairless rat skin were studied and compared aiming to select a patch formula for clinical performance. Skin irritation induced by SE patch was evaluated by visual scoring, color reflectance measurements and non-invasive transepidermal water loss (TEWL) technique. The results indicated that among different SEs tried, laurate SE with shorter fatty acid chain length and higher HLB value significantly increased the amount of TM liberated from the patch (99+/-2.1%) and its permeation across rat skin (86+/-4.3%). The total drug permeation and flux values were approximately 5-fold greater compared to SE free patch. The extent of absorption of TM-SE patch expressed by AUC was 64% larger as compared to the oral solution with steady plasma concentration over 18 h and relative bioavailability (F(rel)) of 163%. The developed patch was well tolerated by all the subjects with only moderate skin irritation, which was recovered in 24h after patch removal. The results are very encouraging and offer an alternative approach to maintain higher, prolonged and controlled blood level profile of the drug over 18-24h.

Two different chitosan (CS) nanocarriers namely nanoparticles and nanoemulsion were developed to prolong Indomethacin (IM) precorneal residence time and to improve its ocular bioavailability the main limitations in its management of post-operative inflammation and intraocular irritation after cataract extraction. CS-nanoparticles were developed by modified ionic gelation of CS with tripolyphosphate while nanoemulsion was prepared by spontaneous emulsification technique. Transmission electron microscopy revealed regular well-identified spherical shape. The nanoparticles had a mean size of 280 nm, a zeta potential of + 17 mV and high loading efficiency of 84.8 % while the mean size of nanoemulsion was affected by the nature of the surfactant used and varies between 220-690 nm. In vitro release studies, performed under sink conditions, revealed small initial burst release during the first hour followed by slow gradual drug release of 76 and 86% from nanoparticles and nanoemulsion respectively during a 24 h period. In vivo studies and histopathological examination revealed that eyes of rabbits treated with nanoemulsion showed clearer healing of corneal chemical ulcer with moderate effective inhibition of polymorph nuclear leukocytic infiltration (PMNLs) compared with nanoparticles preparation. Moreover, following topical instillation of CS-nanoemulsion to rabbits, it was possible to achieve therapeutic concentration of IM in the cornea through out the duration of the study and fairly high IM level in inner ocular structure, aqueous humor. These levels were significantly higher than those obtained following instillation of IM solution. Therefore, CS nanocarriers developed in this study were able to contact intimately with the cornea providing slow gradual IM release with long-term drug level thereby increasing delivery to both external and internal ocular tissues.

Biphenyl Dimethyl Dicarboxylate (BDD) is insoluble in aqueous solution and the bioavailability after oral administration is low. Self-nanoemulsifying drug delivery system (SNEDDS) containing BDD has been successfully prepared using carefully selected ingredients which are less affected by pH and ionic strength changes to improve its bioavailability. SNEDDS is an isotropic mixture of lipid, surfactant, and cosurfactant which are spontaneously emulsified in aqueous medium under gentle digestive motility in the gastrointestinal tract. Pseudo ternary phase diagrams composed of various excipients were plotted to identify self -nano -emulsifying area. Droplet size changes upon dilution with aqueous media and in vitro release of BDD from SNEDDS in 0.1N HCl and phosphate buffer (pH 7.4) were studied and compared with commercial chinese pilules and Pennel capsules. The hepatoprotective activity upon oral administration of SNEDDS against carbon tetrachloride-induced oxidative stress in albino rats was assessed by measuring biochemical parameters like serum glutamic oxalacetate transaminase (SGOT), serum glutamic pyruvate transaminase (SGPT) and lactate dehydrogenase (LDH). Results showed that using a proper ratio of Tween 80 to Transcutol as surfactant and co-surfactant respectively and Miglyol 812 as oil to surfactants mixture resulted in production of infinitely diluted formulations in nano droplet size range. BDD self nano emulsified formula composed of 20% Miglyol 812, 60% Tween 80 and 20% Transcutol released 99% of the drug very rapidly within 10-15 minutes regardless of the pH condition. The oral absorption and bioavailability of BDD self nano emulsified formula in albino rats were significantly enhanced (P<0.01) with an average improvement of 1.7 and 6-folds that of commercial chinese pilules and Pennel capsules respectively. This improvement was also confirmed histopathologically in chemically injured rats and by the significant decrease in elevated liver enzymes level.

A Novel approach was developed for the preparation of controlled release proniosome-derived niosomes, using sucrose stearates as non-ionic biocompatible surfactants for the nebulisable delivery of cromolyn sodium. Conventional niosomes were prepared by a reverse phase evaporation method followed by the preparation of proniosomes by spraying the optimized surfactant-lipid mixture of sucrose stearate, cholesterol and stearylamine in 7:3:0.3 molar ratio onto the surface of spray dried lactose powder. Proniosome-derived niosomes were obtained by hydrating proniosomes with 0.9% saline at 50 degrees C and mixing for approximately 2 min. All vesicles were evaluated for their particle size, morphological characteristics, entrapment efficiency, in vitro drug release, nebulisation efficiency and physical stability at 2-8 degrees C. In addition, coating carrier surface with the surfactant-lipid mixture, during preparation of proniosomes, resulted in smaller, free flowing, homogenous and smooth vesicles with high drug entrapment efficiency. Compared to a standard drug solution, a successful retardation of the drug release rate was achieved with the proniosome-derived niosomes, where the t50% value of the release profile was 18.1h compared to 1.8h. Moreover, high nebulisation efficiency percentage and good physical stability were also achieved. The results are very encouraging and offer an alternative approach to minimize the problems associated with conventional niosomes like degradation, sedimentation, aggregation and fusion.

Glucose monohydrate and sorbitol were evaluated as alternative carriers to á-lactose monohydrate in dry powder inhalations. Cromolyn sodium (CS) - carrier binary formulae were prepared and tested in vitro by aerosolization via a twin stage impinger using three types of inhaler devices; Spinhaler, Aerolizer and Handihaler. Glucose monohydrate and sorbitol-containing formulae that were inhaled via a Handihaler showed significantly higher drug fine particle fractions (P<0.001) than that of the same formulae aerosolized via other devices. Upon storage of the prepared formulae under uncontrolled humidity, that may be encountered during storage and use, marked reductions in these fractions were observed. Incorporation of an optimum Aerosil 200 concentration, as a ternary component, minimized this effect. A urinary excretion pharmacokinetic method was used to evaluate the bioavailability of the selected ternary formulae, inhaled via a Handihaler, relative to the marketed Intal Spincaps, inhaled via a Spinhaler. It was found that the relative bioavailability percentages of the developed formulae were more than twice that of the marketed one suggesting possible future utilization of these more effective ternrry formulae using the more efficient Handihaler inhaler device.

The effect of interpolymer complex formation between positively charged chitosan and negatively charged gelatin (Type B) on the release behavior of tramadol hydrochloride from biodegradable chitosan-gelatin sponges was studied. Mixed sponges were prepared by freeze-drying the cross-linked homogenous stable foams produced from chitosan and gelatin solutions where gelatin acts as a foam builder. Generation of stable foams was optimized where concentration, pH of gelatin solution, temperature, speed and duration of whipping process, and, chitosan-gelatin ratio drastically affect the properties and the stability of the produced foams. The prepared sponges were evaluated for their morphology, drug content, and microstructure using scanning electron microscopy, mechanical properties, uptake capacity, drug release profile, and their pharmacodynamic activity in terms of the analgesic effect after implantation in Wistar rats. It was revealed that whipping 7% (w/w) gelatin solution, of pH 5.5, for 15 min at 25 degrees C with a stirring speed of 1000 rpm was the optimum conditions for stable gelatin foam generation. Moreover, homogenous, uniform chitosan-gelatin foam with small air bubbles were produced by mixing 2.5% w/w chitosan solution with 7% w/w gelatin solution in 1:5 ratio. Indeed, polyionic complexation between chitosan and gelatin overcame the drawbacks of chitosan sponge mechanical properties where, pliable, soft, and compressible sponge with high fluid uptake capacity was produced at 25 degrees C and 65% relative humidity without any added plasticizer. Drug release studies showed a successful retardation of the incorporated drug where the t50% values of the dissolution profiles were 0.55, 3.03, and 4.73 hr for cross-linked gelatin, un-cross-linked chitosan-gelatin, and cross-linked chitosan-gelatin sponges, respectively. All the release experiments followed Higuchi's diffusion mechanism over 12 hr. The achieved drug prolongation was a result of a combined effect of both cross-linking and polyelectrolyte complexation between chitosan and gelatin. The analgesic activity of the implanted tramadol hydrochloride mixed chitosan-gelatin sponge showed reasonable analgesic effect that was maintained for more than 8 hr. Therefore, the use of chitosan and gelatin together appears to allow the formulator to manipulate both the drug release profiles and the mechanical properties of the sponge that could be effectively implanted.

Cross-linked chitosan sponges as controlled release drug carrier systems were developed. Tramadol hydrochloride, a centrally acting analgesic, was used as a model drug. The sponges were prepared by freeze-drying 1.25% and 2.5% (w/w) high and low M.wt. chitosan solutions, respectively, using glutaraldehyde as a cross-linking agent. The hardness of the prepared sponges was a function of glutaraldehyde concentration and volume where the optimum concentration that offered accepted sponge consistency was 5%. Below or above 5%, very soft or very hard and brittle sponges were obtained, respectively. The determined drug content in the prepared sponges was uniform and did not deviate markedly from the calculated amount. Scanning electron microscopy (SEM) was used to characterize the internal structures of the sponges. The SEM photos revealed that cross-linked high M.wt. chitosan sponges have larger size surface pores that form connections (channels) with the interior of the sponge than cross-linked low M.wt. ones. Moreover, crystals of the incorporated Tramadol hydrochloride were detected on the lamellae and within pores in both chitosan sponges. Differences in pore size and dissolution medium uptake capacity were crucial factors for the more delayed drug release from cross-linked low M.wt. chitosan sponges over high M.wt. ones at pH 7.4. Kinetic analysis of the release data using linear regression followed the Higuchi diffusion model over 12 hours. Setting storage conditions at room temperature under 80-92% relative humidity resulted in soft, elastic, and compressible sponges.

The performance of dioctyl sodium sulfosuccinate (aerosol OT) in the development of a pharmaceutically acceptable, stable, self-emulsifying water continuous microemulsion with high dilution efficiency was assessed. A pseudoternary microemulsion system was constructed using aerosol OT/medium-chain triglycerides with oleic acid/glycerol monooleate and water. The model microemulsion was characterized with regard to its electroconductive behavior, eosin sodium absorption, interfacial tension, and droplet size measurements after dilution with water. The percolation transition law, which makes it possible to determine the percolation threshold and to identify bicontinuous structures, was applied to the system. The interfacial tension changes associated with the microemulsion formation revealed ultralow values up to 30% oil at a surfactant/cosurfactant ratio of 3:1. Moreover, the investigated particle size and polydispersity using photon correlation spectroscopy after dilution with excess of the continuous phase proved the efficiency of the microemulsion system as a drug carrier that ensures an infinitely dilutable, homogeneous, and thermodynamically stable system.

The influence of the vehicle on the release and permeation of fluconazole, a topical antifungal drug dissolved in Jojoba oil was evaluated. Series of Cutina lipogels (Cutina CPA [cetyl palmitate], CBS [mixture of glyceryl stearate, cetearyl alcohol, cetyl palmitate, and cocoglycerides], MD [glyceryl stearate], and GMS [glyceryl monostearate]) in different concentrations as well as gel microemulsion were prepared. In-vitro drug release in Sorensen's citrate buffer (pH 5.5) and permeation through the excised skin of hairless mice, using a modified Franz diffusion cell, were performed. The rheological behavior and the apparent viscosity values for different gel bases were measured before and after storage under freezing conditions at -4 degrees C and were taken as measures for stability of network structure. Candida albicans was used as a model fungus to evaluate the antifungal activity of the best formula achieved. The results of in vitro drug release and its percutaneous absorption showed that the highest values from gel microemulsion were assured. The rheological behavior of the prepared systems showed pseudoplastic (shear-thinning) flow indicating structural breakdown of the existing intermolecular interactions between polymeric chains. Moreover, the stability study revealed no significant difference between viscosity before and after storage for different formulae except for CPA Cutina lipogel (using analysis of variance [ANOVA] test at level of significance.05). The antifungal activity of fluconazole showed the widest zone of inhibition with gel microemulsion. The gel microemulsion is an excellent vehicle for fluconazole topical drug delivery.