Search

Oils and grease have beneficial effects on moving parts such as connecting rod, gears, shafts, and engine to reduce wear and friction. The properties of lubricants such as tribological and rheological properties are an important role in oils and grease characterization. Nano additives on lubricant oils play an important role in anti-wear; reduce the coefficient of friction and enhance the rheological properties. The Tribological and rheological behavior of base oil 15W50 which have different concentrations of multi-wall Carbon Nanotubes (MWCNTs) (0.5, 1, 1.5, and 2 wt%), and constant amount of graphene nanosheets (GNSs) (0.5 wt%) were investigated. This research is the first one in studying the effect of hybrid nano additives of (MWCNTs) and (GNs) on the tribological and rheological properties of lubricant oils. Tribological characterization was carried out on four ball testing model under different loads (200, 400, 600, and 800 N). The kinematic viscosity, flash point, pour point, and thermal conductivity of nanofluid added 15W50 lubricant are estimated and compared with base oil. The results showed that nano additives improve the wear scar and coefficient of friction by 78% and 48%, respectively. The flash point, thermal conductivity, kinematic viscosity, and pour point, were improved by 15%, 77%, 76.8%, and 20%, respectively compared with the base oil. The hybrid addition of CNTs/GNs nanoparticles enhanced the properties of 15W50 engine oil. [ABSTRACT FROM AUTHOR]

Carbon nanotubes have a lot of applications in mechanical fields. This is because nanomaterials have many superior mechanical properties such as very high strength-to-weight ratio, high modulus-to-weight ratio, high corrosion resistance, and super intelligence properties, which make them as smart materials. One of these attractive applications is the use of carbon nanotubes in vehicle brake friction material. Therefore, the fabrication and testing processes of these nanomaterials should be performed carefully to evaluate their mechanical, tribological, and noise properties. In this paper, friction material mixed with carbon nanotubes have been fabricated with different carbon nanotube contents and the same fabrication parameters. The carbon nanotubes have been produced using the conventional submerged arc discharge technique. The produced friction materials have been cut into pieces with standard sizes and then tested mechanically and tribologically. The results of tests have illustrated that the addition of carbon nanotubes into the friction materials could improve their mechanical properties (hardness, strength, and modulus) and also could enhance their tribological properties (wear rate and friction coefficient). Moreover, the tests showed that the presence of carbon nanotubes in friction materials could reduce the noise, vibration of the friction materials, and reduce the temperature rise due to the effect of friction, which means that the carbon nanotubes could raise the thermal conductivity of friction material, while the friction coefficient has stayed within the allowable standard limits (0.35–0.45). Surface morphology shows that the presence of carbon nanotubes in the friction materials could help to avoid surface friction cracks or fins within the normal operating conditions. The good combination of mechanical and tribological properties was obtained at 0.5% carbon nanotubes. [ABSTRACT FROM AUTHOR]