Search

Objective: Environmental monitoring of Legionella in hot water systems of hotels in Morocco was performed during the period from January 2016 to April 2018. A total of 149 water samples from 118 different hotels were analyzed. Methods: A total of 149 water samples from 118 different hotels were analyzed. Possible risk factors were prospectively recorded, and data were analyzed in connection with building and plumbing systems characteristics. Data about building and risk factors were collected through a questionnaire survey. Results: Out of the 149 samples, 77(51.7%) were positive for L. pneumophila. Serological typing of the isolates revealed that 54 (70.1%) are L. pneumophila serogroup 2–15 and 23 (29.9%) are L. pneumophila serogroup 1. 56.8% of all buildings were colonized by L. pneumophila. Counts were over 1,000 CFU/L in 44%. Contamination was strongly correlated with temperature in the circulation, the age of the premise plumbing and the size of the building. Conclusions: The results showed a relevant exposure to L. pneumophila in the community and the identified risk factors can serve as indicators for risk assessment and relevant actions. HIGHLIGHTS Travel and stays in accommodation sites will continue to represent a significant cause of travel-associated LD, especially in a region of increasing travel to countries that may not have the expertise or resources to prevent or reduce the risk of exposure to Legionella species.; Legionella in Moroccan hotels is a major concern still poorly investigated.; Legionella found in 51.7% of analyzed samples and 56.8% of investigated buildings.; Temperature in the circulation, age of the premise plumbing, and the size of building were positively associated with contamination.; The results showed a relevant exposure to L. pneumophila in the community and the identified risk factors can serve as indicators for risk assessment and relevant actions.

Premise plumbing promotes the regrowth and survival of opportunistic pathogens, such as Legionella pneumophila (L. pneumophila), especially within biofilms. The purpose of this study was to investigate the effectiveness of chlorine disinfection against L. pneumophila serogroup 1 and serogroup 2–15 planktonic form and biofilms. Planktonic cells were able to survive during the study period in the presence of chlorine at recommended free chlorine levels (0.2–0.5 mg/L). Biofilms were developed on galvanized steel and polyvinyl chloride (PVC) for 18 and 30 days and exposed to 50, 100, 150, and 200 mg/L for 2 hours. No colony appeared immediately after chlorination; however, persistent cells were able to tolerate treatment and continue to grow on subsequent days. The biofilm formation was evaluated by atomic force microscopy. This study demonstrates that the biofilm formed on the surfaces of plumbing materials increases bacterial resistance against high levels of chlorination. A new approach towards monitoring and eradicating L. pneumophila from water systems is required.

Objective: Legionella is a waterborne pathogen that causes a severe form of pneumonia called Legionnaires' diseases, which is normally acquired by inhalation of aerosols containing Legionella origi...

The aim of this study was to evaluate the effect of chemical compounds found in different water types on the physico-chemical properties of bacteria and the adhesion of two strains (Pseudomonas aeruginosa and Escherichia coli) to glass, PVC and stainless steel. P. aeruginosa and E. coli were exposed to two sterile water types (distilled water and tap water) for 3 h. Contact angle measurements were used to assess the surface properties of both strains and coupons of different materials. The hydrophobicity and the electron donor properties of the bacterial strains seems to increase when exposed to sterile tap water compared to distilled water, while the electron acceptor property is largely unchanged. The adhesion tests were carried out in a water circuit creating turbulence. The number of adhered cells was determined after their detachment from the coupons using an ultrasonic bath for 2 min. The findings showed that the type of water affects the adhesion of both strains, which is stronger in tap water than distilled water. A correlation test to determine the surface property that governs adhesion in these conditions, suggested that the adhesion is mainly governed by hydrophobicity.

Background and Objectives: Legionnaires’ disease continues to be a public health concern. Colonized water distribution systems are often implicated in Legionella transmission, despite the use of various disinfection strategies, the bacterium is capable to persist and survive in water systems. The aim of this study was to investigate the persistence of Legionella pneumophila to sodium chloride over time at different temperatures and analysing the role of biofilms in the survival of this bacteria. Materials and Methods: L. pneumophila serogroup 1 and L. pneumophila serogroup 2-15 were used to study the effect of sodium chloride on planktonic and sessile cells. The tested concentrations were: 0.5%, 1%, 2%, 3%, 4%, 6% and 8% (W/V) NaCl. Biofilms were grown on 24-well microplates. Results: At 20°C, L. pneumophila planktonic cells were able to survive in sodium chloride concentrations up to 2%. How- ever, at 37°C, a sodium chloride concentration over 1.5%, reduced systematically the numbers of bacterial cells. Biofilms were grown for 20 days in the absence and presence of sodium chloride. The results show that bacterial strains were able to survive and regrow after the sodium chloride shock (2-3%). Moreover, it seems that this effect is less expressed with the age of the biofilm; old biofilms were more persistent than the young ones. Conclusion: Results from this study demonstrate that the sodium chloride disinfection strategy was effective on Legionella pneumophila planktonic cells but not on biofilms, which demonstrate the role of biofilms in the persistence and recoloniza- tion of L. pneumophila in water distribution systems.

Microbial adhesion to surfaces is thought to involve physicochemical interactions between the substrate and microbial cells. Understanding the physicochemical aspects involved in the adhesion phenomenon, as a critical step in biofilm formation, is essential to finding ways to prevent their formation and control biocontamination risks. The aim of this study was to investigate the relation between the adhesion behavior of 12 Escherichia coli strains isolated from food and their surface hydrophobicities using qualitative ( θ w ) and quantitative (ΔGiwi) approaches. The surface physicochemical properties of both bacterial cells and glass material were estimated through contact angle measurements. The adhesive behavior of E. coli strains on a glass surface was assessed. The results showed a good logarithmic relation between the percentage of the adhered cells and their surface hydrophobicity with the quantitative approach ΔGiwi; however, qualitative hydrophobicity ( θ w ) appeared to demonstrate no effect regarding adhesion behavior. This work lays the foundation for future studies and opens an important debate on the mechanisms underlying the adhesion behavior of E. coli strains by using the thermodynamic approach (ΔGiwi) as an important model of hydrophobicity that could explain and predict better bacterial adhesion ability.

We aimed to investigate the adhesion of Legionella pneumophila serogroup1 and L. pneumophila serogroup2-15 on glass, galvanized steel, stainless steel, copper, Polyvinyl chloride(PVC), Cross-linked polyethylene(PEX-c) and Polypropylene Random Copolymer(PPR). The surface physicochemical properties of both bacterial cells and materials were estimated through contact angle measurements. The roughness and surface topography of the materials were evaluated by Atomic Force Microscopy. The two L. pneumophila serogroups and plumbing materials showed a hydrophobic character, while glass surface was hydrophilic. All strains were adhered to all materials with the exception of copper. The result showed that the adhesion of both L. pneumophila sg1 and sg2-15 was systematically expressed with high intensity on galvanized steel followed by PVC, PEX-c, PPR, stainless steel and the low intensity on glass. The extent of adhesion is in correlation with the surface roughness and acid-bases interactions, while hydrophobicity seems to have no effect in adhesion intensity.

The purpose of our study was to investigate the biofilm formation by Legionella pneumophila serogroup1 and serogroup2-15 on plumbing materials mostly used in building water systems in Morocco. The ...

In this work, the denitrification of nitrate-contaminated groundwater by electrocoagulation (EC) method using aluminum electrodes has been studied for the production of drinking water. Tests were carried out on four samples collected from the Casablanca-Settat region. EC was investigated for a fixed applied voltage (30 V), the submerged surface area of each electrode plate (33.75 cm2) and the inter-electrode distance (1.8 cm). The results obtained showed that the nitrate removal efficiency reached values between 88.48% and 94.1% after 120 min for the various studied groundwater samples. Also, these results showed that sulfates are removed equally with nitrates during electrocoagulation treatment and that their removal efficiencies ranged from 58.24% to 97.86% for all studied samples after 120 min depending on the initial chloride concentration. The bacterial charge has been completely eliminated by electrocoagulation for most of the bacteria present in the treated water. Finally, X-ray diffraction was used to characterize the sludge formed by aluminum electrodes during the EC process.

The formation of biofilm is a universal bacterial survival strategy. Biofilms occur on inert and living support in the natural environment and in industrial installations. This microenvironment leads to the horizontal transfer of genetic material between bacteria by physical contact. In order to evaluate the relationship between biofilm-forming capabilities, surface characteristics and plasmid content we purified from Salmonella a plasmid conferring resistance to cephalosporin and transferred it by electroporation to E.coli DH10B originally unable to form biofilm in inert surface. We demonstrated the association between a plasmid conferring resistance to expanded-spectrum cephalosporin and biofilm formation. We also noted that this plasmid influences the cell surface properties and cell motility.