Search

Octopamine is a well-established invertebrate neurotransmitter involved in fight or flight responses. In mammals, its function was replaced by epinephrine. Nevertheless, it is present at trace amounts and can modulate the release of monoamine neurotransmitters by a yet unidentified mechanism. Here, through a multidisciplinary approach utilizing in vitro and in vivo models of α-synucleinopathy, we uncovered an unprecedented role for octopamine in driving the conversion from toxic to neuroprotective astrocytes in the cerebral cortex by fostering aerobic glycolysis. Physiological levels of neuron-derived octopamine act on astrocytes via a trace amine-associated receptor 1–Orai1–Ca 2+ –calcineurin-mediated signaling pathway to stimulate lactate secretion. Lactate uptake in neurons via the monocarboxylase transporter 2–calcineurin-dependent pathway increases ATP and prevents neurodegeneration. Pathological increases of octopamine caused by α-synuclein halt lactate production in astrocytes and short-circuits the metabolic communication to neurons. Our work provides a unique function of octopamine as a modulator of astrocyte metabolism and subsequent neuroprotection with implications to α-synucleinopathies.

Chitosan (CS)/graphene nanocomposite films with tunable biomechanics, electroconductivity and biocompatibility using polyvinylpyrrolidone (PVP) and Pluronic F108 (Plu) as emulsion stabilizers for the purpose of conductive tissue engineering were successfully obtained. In order to obtain a composite solution, aqueous dispersions of multilayered graphene stabilized with Plu/PVP were supplied with CS at a ratio of CS to stabilizers of 2:1, respectively. Electroconductive films were obtained by the solution casting method. The electrical conductivity, mechanical properties and in vitro and in vivo biocompatibility of the resulting films were assessed in relation to the graphene concentration and stabilizer type and they were close to that of smooth muscle tissue. According to the results of the in vitro cytotoxicity analysis, the films did not release soluble cytotoxic components into the cell culture medium. The high adhesion of murine fibroblasts to the films indicated the absence of contact cytotoxicity. In subcutaneous implantation in Wistar rats, we found that stabilizers reduced the brittleness of the chitosan films and the inflammatory response.

We evaluated the applicability of chitosan-g-oligo(L,L-lactide) copolymer (CLC) hydrogel for central nervous system tissue engineering. The biomechanical properties of the CLC hydrogel were characterized and its biocompatibility was assessed with neural progenitor cells obtained from two different sources: H9-derived neural stem cells (H9D-NSCs) and directly reprogrammed neural precursor cells (drNPCs). Our study found that the optically transparent CLC hydrogel possessed biomechanical characteristics suitable for culturing human neural stem/precursor cells and was noncytotoxic. When seeded on films prepared from CLC copolymer hydrogel, both H9D-NSC and drNPC adhered well, expanded and exhibited signs of spontaneous differentiation. While H9D-NSC mainly preserved multipotency as shown by a high proportion of Nestin+ and Sox2+ cells and a comparatively lower expression of the neuronal markers βIII-tubulin and MAP2, drNPCs, obtained by direct reprogramming, differentiated more extensively along the neuronal lineage. Our study indicates that the CLC hydrogel may be considered as a substrate for tissue-engineered constructs, applicable for therapy of neurodegenerative diseases. Impact statement We synthetized a chitosan-g-oligo(L,L-lactide) hydrogel that sustained multipotency of embryonic-derived neural stem cells (NSCs) and supported differentiation of directly reprogrammed NSC predominantly along the neuronal lineage. The hydrogel exhibited no cytotoxicity in vitro, both in extraction and contact cytotoxicity tests. When seeded on the hydrogel, both types of NSCs adhered well, expanded, and exhibited signs of spontaneous differentiation. The biomechanical properties of the hydrogel were similar to that of human spinal cord with incised pia mater. These data pave the way for further investigations of the hydrogel toward its applicability in central nervous system tissue engineering.

—The key aspects of the modification of biocompatible materials in a medium of supercritical carbon dioxide (SC–CO2) and the main trends in the application of the described method to the fabrication of three-dimensional scaffolds, sterilization of medical devices, decellularization of mammalian tissues, and impregnation of materials with biologically active molecules are described. Due to the nondestructive action of the medium of SC–CO2 on the architectonics of an extracellular matrix, the preservation of the mechanical properties and structure of the materials being treated, and an absence of the need for the postprocessing and purification of the formed matrices, the presented method can be considered as a versatile approach to the solution of urgent problems in biomedical materials science.

One of the leading trends in the modern tissue engineering is the development of new effective methods of decellularization aimed at the removal of cellular components from a donor tissue, reducing its immunogenicity and the risk of rejection. Supercritical CO2 (scCO2)-assisted processing has been proposed to improve the outcome of decellularization, reduce contamination and time costs. The resulting products can serve as personalized tools for tissue-engineering therapy of various somatic pathologies. However, the decellularization of heterogeneous 3D structures, such as the aortic root, requires optimization of the parameters, including preconditioning medium composition, the type of co-solvent, values of pressure and temperature inside the scCO2 reactor, etc. In our work, using an ovine aortic root model, we performed a comparative analysis of the effectiveness of decellularization approaches based on various combinations of these parameters. The protocols were based on the combinations of treatments in alkaline, ethanol or detergent solutions with scCO2-assisted processing at different modes. Histological analysis demonstrated favorable effects of the preconditioning in a detergent solution. Following processing in scCO2 medium provided a high decellularization degree, reduced cytotoxicity, and increased ultimate tensile strength and Young&rsquo, s modulus of the aortic valve leaflets, while the integrity of the extracellular matrix was preserved.

One of the leading trends in the modern tissue engineering is the development of new effective methods of decellularization aimed at the removal of cellular components from donor tissue reducing its immunogenicity and the risk of rejection. Supercritical CO2 (scCO2) extraction can significantly improve the outcome of decellularization, reduce contamination and time costs. The resulting products can serve as personalized tools for tissue-engineering therapy of various somatic pathologies. However, decellularization of complex 3D structures, such as the aortic root, requires optimization of the parameters, including preconditioning medium composition, type of co-solvent, values of pressure and temperature insight the scCO2 reactor, etc. In our work, using an ovine aortic root model, we performed a comparative analysis of the efficiency of decellularization using approaches based on various combinations of these parameters. The protocols were based on combinations of treatment in alkaline, ethanol or detergent solutions with scCO2 extraction at different modes. Based on a histological analysis, we have selected an optimal protocol for the decellularization of ovine aortic root employing preconditioning in a detergent solution. The positive effects of scCO2 on the decellularization extent, cytotoxicity and histoarchitecture of the tissue were demonstrated.

Neural activity depends on the maintenance of ionic and osmotic homeostasis. Under these conditions, the cell volume must be regulated to maintain optimal neural function. A disturbance in the neuronal volume regulation often occurs in pathological conditions such as glutamate excitotoxicity. The cell volume, mechanical properties, and actin cytoskeleton structure are tightly connected to achieve the cell homeostasis. Here, we studied the effects of glutamate-induced excitotoxicity, external osmotic pressure, and inhibition of actin polymerization on the viscoelastic properties and volume of neurons. Atomic force microscopy was used to map the viscoelastic properties of neurons in time-series experiments to observe the dynamical changes and a possible recovery. The data obtained on cultured rat cortical neurons were compared with the data obtained on rat fibroblasts. The neurons were found to be more responsive to the osmotic challenges but less sensitive to the inhibition of actin polymerization than fibroblasts. The alterations of the viscoelastic properties caused by glutamate excitotoxicity were similar to those induced by the hypoosmotic stress, but, in contrast to the latter, they did not recover after the glutamate removal. These data were consistent with the dynamic volume changes estimated using ratiometric fluorescent dyes. The recovery after the glutamate-induced excitotoxicity was slow or absent because of a steady increase in intracellular calcium and sodium concentrations. The viscoelastic parameters and their changes were related to such parameters as the actin cortex stiffness, tension, and cytoplasmic viscosity.

We evaluated the applicability of chitosan

Biomeshes based on decellularized bovine pericardium (DBP) are widely used in reconstructive surgery due to their wide availability and the attractive biomechanical properties. However, their efficacy in clinical applications is often affected by the uncontrolled immunogenicity and proteolytic degradation. To address this issue, we present here in vivo multiparametric imaging analysis of epoxy crosslinked DBPs to reveal their fate after implantation. We first analyzed the structure of the crosslinked DBP using scanning electron microscopy and evaluated proteolytic stability and cytotoxicity. Next, using combination of fluorescence and hypoxia imaging, X-ray computed microtomography and histology techniques we studied the fate of DBPs after subcutaneous implantation in animals. Our approach revealed high resistance to biodegradation, gradual remodeling of a surrounding tissue forming the connective tissue capsule and calcification of crosslinked DBPs. These changes were concomitant to the development of hypoxia in the samples within 3 weeks after implantation and subsequent induction of angiogenesis and vascularization. Collectively, presented approach provides new insights on the transplantation of the epoxy crosslinked biomeshes, the risks associated with its applications in soft-tissue reconstruction and can be transferred to studies of other types of implants.

We created an anisotropic material based on collagen sponge and reactive polylactide structured by laser photopolymerization. The combination of collagen with reactive polylactide improves the resistance of the formed matrices to biodegradation in comparison with collagen sponge, while the existence of sites with different mechanical characteristics and cell affinity on the matrix provides directed cell growth during their culturing. It was shown that reinforcement of the collagen sponges 7-fold increased the mean Young's modulus for the hybrid matrix without affecting its cytotoxicity. The developed matrix provides cell adhesion and proliferation along reinforcement lines and can be used for fabrication of tissue engineering constructs.

Recent years have witnessed the development of an enormous variety of hydrogel-based systems for neuroregeneration. Formed from hydrophilic polymers and comprised of up to 90% of water, these three-dimensional networks are promising tools for brain tissue regeneration. They can assist structural and functional restoration of damaged tissues by providing mechanical support and navigating cell fate. Hydrogels also show the potential for brain injury therapy due to their broadly tunable physical, chemical, and biological properties. Hydrogel polymers, which have been extensively implemented in recent brain injury repair studies, include hyaluronic acid, collagen type I, alginate, chitosan, methylcellulose, Matrigel, fibrin, gellan gum, self-assembling peptides and proteins, poly(ethylene glycol), methacrylates, and methacrylamides. When viewed as tools for neuroregeneration, hydrogels can be divided into: (1) hydrogels suitable for brain injury therapy, (2) hydrogels that do not meet basic therapeutic requirements and (3) promising hydrogels which meet the criteria for further investigations. Our analysis shows that fibrin, collagen I and self-assembling peptide-based hydrogels display very attractive properties for neuroregeneration., Graphical abstract Unlabelled Image

In this paper, terahertz (THz) pulsed spectroscopy and solid immersion microscopy were applied to study interactions between water vapor and tissue scaffolds–the decellularized bovine pericardium (DBP) collagen matrices, in intact form, cross-linked with the glutaraldehyde or treated by plasma. The water-absorbing properties of biomaterials are prognostic for future cell-mediated reactions of the recipient tissue with the scaffold. Complex dielectric permittivity of DBPs was measured in the 0.4–2.0 THz frequency range, while the samples were first dehydrated and then exposed to water vapor atmosphere with 80.0 ± 5.0% relative humidity. These THz dielectric measurements of DBPs and the results of their weighting allowed to estimate the adsorption time constants, an increase of tissue mass, as well as dispersion of these parameters. During the adsorption process, changes in the DBPs’ dielectric permittivity feature an exponential character, with the typical time constant of =8–10 min, the transient process saturation at =30 min, and the tissue mass improvement by =1–3%. No statistically-relevant differences between the measured properties of the intact and treated DBPs were observed. Then, contact angles of wettability were measured for the considered DBPs using a recumbent drop method, while the observed results showed that treatments of DBP somewhat affects their surface energies, polarity, and hydrophilicity. Thus, our studies revealed that glutaraldehyde and plasma treatment overall impact the DBP–water interactions, but the resultant effects appear to be quite complex and comparable to the natural variability of the tissue properties. Such a variability was attributed to the natural heterogeneity of tissues, which was confirmed by the THz microscopy data. Our findings are important for further optimization of the scaffolds’ preparation and treatment technologies. They pave the way for THz technology use as a non-invasive diagnosis tool in tissue engineering and regenerative medicine.

Bioprosthetic materials based on mammalian pericardium tissue are the gold standard in reconstructive surgery. Their application range covers repair of rectovaginal septum defects, abdominoplastics, urethroplasty, duraplastics, maxillofacial, ophthalmic, thoracic and cardiovascular reconstruction, etc. However, a number of factors contribute to the success of their integration into the host tissue including structural organization, mechanical strength, biocompatibility, immunogenicity, surface chemistry, and biodegradability. In order to improve the material's properties, various strategies are developed, such as decellularization, crosslinking, and detoxification. In this review, the existing issues and long-term achievements in the development of bioprosthetic materials based on the mammalian pericardium tissue, aimed at a wide-spectrum application in reconstructive surgery are analyzed. The basic technical approaches to preparation of biocompatible forms providing continuous functioning, optimization of biomechanical and functional properties, and clinical applicability are described.

Decellularized bovine pericardium (DBP)-based biomeshes are the gold standard in reconstructive surgery. In order to prolong their stability after the transplantation, various chemical cross-linking strategies are employed. However, structural and functional properties of the biomeshes differ in dependence on the cross-linker used. Here, we performed a bottom-up study of structural and functional alterations of DBP-based biomeshes following cross-linking with hexamethylene diisocyanate (HMDC), ethylene glycol diglycidyl ether (EGDE), 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and genipin. The in vitro cytotoxicity tests supported their clinical applicability. Their structural differences (eg roughness, fibre thickness, pore morphology) were evaluated using the two-photon confocal laser scanning, atomic force, scanning electron and polarized light microscopies. HMDC and EDC samples appeared to be the roughest. Complex mechanical trials indicated the tendency to reduced Young's Modulus and mechanical anisotropy values of DBP upon cross-linking. The lowest mechanical anisotropy was found in EDC and genipin sample groups. In vitro collagenase susceptibility was the highest for EDC samples and the lowest for EGDE samples. The comparative analysis of the results allowed us to recognize the strengths and weaknesses of each cross-linker in relation to a particular clinical application.

Over the last decade, a number of hydrogels attracted great attention in the area of brain tissue engineering. The hydrogels are composed of hydrophilic polymers forming 3D network in water. Their function is promoting structural and functional restoration of damaged brain tissues by providing mechanical support and navigating cell fate. This paper reports on the neurocompatibility of chitosan-g-oligo(L,L-lactide) copolymer hydrogel with primary rat cortical neuron culture. The hydrogel was produced by a molding technique on the base of photocurable composition consisting of chitosan-g-oligo(L,L-lactide) copolymer, poly(ethylene glycol) diacrylate and photosensitizer Irgacure 2959. The influence of the hydrogel on cell viability, phenotype and calcium homeostasis, mitochondrial potential and oxygen consumption rate in glutamate excitotoxicity was analyzed using primary neuron cultures obtained from a neonatal rat cortex. This study revealed that the hydrogel is non-cytotoxic. Dissociated neonatal rat cortical cells were actively attaching to the hydrogel surface and exhibited the phenotype, calcium homeostasis and mitochondrial function in both standard conditions and glutamate excitotoxicity (100 μM) similar to the control cells cultured without the hydrogel. To conclude, in this study we assessed the feasibility of the application of chitosan-g-oligo(L,L-lactide) copolymer hydrogel for tissue engineering therapy of brain injury in an in vitro model. The results support that the hydrogel is able to sustain realization of the functional metabolic activity of neonatal rat cortical cells in response to glutamate excitotoxicity.

Application of restructured collagen-based biomaterials is generally restricted by their poor mechanical properties, which ideally must be close to those of a tissue being repaired. Here, we present an approach to the formation of a robust biomaterial using laser-induced curing of a photosensitive star-shaped polylactide. The created collagen-based structures demonstrated an increase in the Young's modulus by more than an order of magnitude with introduction of reinforcing patterns (from 0.15 ± 0.02 MPa for the untreated collagen to 51.2 ± 5.6 MPa for the reinforced collagen). It was shown that the geometrical configuration of the created reinforcing pattern affected the scaffold's mechanical properties only in the case of a relatively high laser radiation power density, when the effect of accumulated thermomechanical stresses in the photocured regions was significant. Photo-crosslinking of polylactide did not compromise the scaffold's cytotoxicity and provided fluorescent regions in the collagen matrix, that create a potential for noninvasive monitoring of such materials' biodegradation kinetics in vivo.

Articular hyaline cartilage is extensively hydrated, but it is neither innervated nor vascularized, and its low cell density allows only extremely limited self-renewal. Most clinical and research efforts currently focus on the restoration of cartilage damaged in connection with osteoarthritis or trauma. Here, we discuss current clinical approaches for repairing cartilage, as well as research approaches which are currently developing, and those under translation into clinical practice. We also describe potential future directions in this area, including tissue engineering based on scaffolding and/or stem cells as well as a combination of gene and cell therapy. Particular focus is placed on cell-based approaches and the potential of recently characterized chondro-progenitors; progress with induced pluripotent stem cells is also discussed. In this context, we also consider the ability of different types of stem cell to restore hyaline cartilage and the importance of mimicking the environment in vivo during cell expansion and differentiation into mature chondrocytes.

Maintaining the epithelial status of cells in vitro and fabrication of a multilayered epithelial lining is one of the key problems in the therapy using cell technologies. When cultured in a monolayer, epithelial cells change their phenotype from epithelial to epithelial-mesenchymal or mesenchymal that makes it difficult to obtain a sufficient number of cells in a 2D culture and to use them in tissue engineering. Here, using buccal epithelial cells from the oral mucosa, we developed a novel approach to recover and maintain the stable cell phenotype and form a multilayered epithelial lining in vitro via the 2D/3D cell self-assembling. Transitioning the cells from the monolayer to non-adhesive 3D culture conditions led to formation of self-assembling spheroids, with restoration of their epithelial characteristics after epithelial-mesenchymal transition. In 7 days, the cells within spheroids restored the apical-basal polarity, and the formation of both tight (ZO1) and adherent (E-cadherin) intercellular junctions was shown. Thus, culturing buccal epithelial cells in a 3D system allowed us to recover and durably maintain the morphological and functional characteristics of epithelial cells. The multilayered epithelial lining formation was achieved after placing spheroids for 7 days onto a hybrid matrix, which consisted of collagen layers and reinforcing poly (lactide-co-glycolide) fibers and was proven promising for replacement of the urothelium. Thus, we offer an effective technique of forming multilayered epithelial linings on carrier-matrices using cell spheroids that was not previously described elsewhere and can find a wide range of applications in tissue engineering, replacement surgery, and regenerative medicine.

Shown the efficiency of the LAS method in creating mechanically induced scaffolds with a multilayer biointerface.

This study was aimed to design and characterise hybrid tissue-engineered constructs composed of osteoinducing polylactide-based scaffolds with multi-layered cellular biointerface for bone tissue reconstruction. Three-dimensional scaffolds with improved hydrophilic and osteoinducing properties were produced using the surface-selective laser sintering (SSLS) method. The designed scaffold pattern had dimensions of 8 × 8 × 2.5 mm and ladder-like pores (∼700 μm in width). Hyaluronic acid-coated polylactide microparticles (∼100 μm in diameter) were used as building blocks and water was used as the photosensitizer for SSLS followed by photocross-linking with Irgacure 2959 photoinitiator. Resulting scaffolds provided successful adhesion and expansion of human bone marrow mesenchymal stromal cells from a single-cell suspension. Induced calcium deposition by the cells associated with osteogenic differentiation was detected in 7-21 days of culturing in basal medium. The values were up to 60% higher on scaffolds produced at a higher prototyping speed under the experimental conditions. Innovative approach to graft the scaffolds with multi-layered cell sheets was proposed aiming to facilitate host tissue-implant integration. The sheets of murine MS-5 stromal cell line exhibited contiguous morphology and high viability in a modelled construct. Thus, the SSLS method proved to be effective in designing osteoinducing scaffolds suitable for the delivery of cell sheets.

We report of surface modification approaches of nanoparticles with anti-Stokes luminescence, known as upconversion nanoparicles (UCNPs), comprised of inorganic host NaYF4 codoped with Yb3+ and Er3+or Tm3+. These approaches enabled the facile, lossless preparation of hybrid polymer-encapsulated UCNPs suitable for bioassays. These probes inherited UCNP properties, such as excellent photoluminescence under excitation with NIR light from the biotissue “transparency window”, as well as they were dispersible in aqueous media and physiological buffers, exhibiting chemical stability. The feasibility of the hybrid UCNPs was demonstrated for in vitro bioassay and in vivo optical whole animal imaging using a home-built epiluminescence imaging system.

The cytotoxicity and non-specific cellular uptake of the most popular composition of upconversion nanoparticle (UCNP), NaYF4:Yb3+:Er3+, is reported using normal human skin cells, including dermal fibroblasts and immortalized human epidermal linear keratinocytes (HaCaT). A new hydrophilization reaction of as-synthesized UCNPs based on tetramethylammonium hydroxide (TMAH) enabled evaluation of the intrinsic cytotoxicity of bare UCNPs. The cytotoxicity effects of the UCNP surface-coating and polystyrene host were investigated over the concentration range 62.5–125 μg/mL with 24-h incubation, using a MTT test and optical microscopy. The fibroblast viability was not compromised by UCNPs, whereas the viability of keratinocytes varied from 52% ± 4% to 100% ± 10% than the control group, depending on the surface modification. Bare UCNPs reduced the keratinocyte viability to 76% ± 3%, while exhibiting profound non-specific cellular uptake. Hydrophilic poly(D,L-lactide)- and poly(maleic anhydride-alt-1-octadecene)-coated UCNPs were found to be least cytotoxic among the polymer-coated UCNPs, and were readily internalized by human skin cells. Polystyrene microbeads impregnated with UCNPs remained nontoxic. Surprisingly, no correlation was found between UCNP cytotoxicity and the internalization level in cells, although the latter ranged broadly from 0.03% to 59%, benchmarked against 100% uptake level of TMAH-UCNPs.

Bioprobes based on fluorescent ruby nanoparticles, which are suitable for ultrasensitive imaging, are reported. A stable aqueous/buffer colloid, permitting facile conjugation to proteins, is produced by femtosecond laser ablation of ruby and the nanoparticles (mean size 17 nm) are photostable, with long lifetime (1–4 ms) 694 nm emission. With time-gating complete (>20 dB) suppression of cell autofluorescence and suppression of exogenous fluorophores is observed. Nanoparticles are imaged in as-grown cells and those immunolabeled with quantum dots. Immunoassay binding to target biomolecules is also demonstrated.

Innovative luminescent nanomaterials, termed upconversion nanoparticles (UCNPs), have demonstrated considerable promise as molecular probes for high-contrast optical imaging in cells and small animals. The fea- sibility study of optical diagnostics in humans is reported here based on experimental and theoretical modeling of optical imaging of an UCNP-labeled breast cancer lesion. UCNPs synthesized in-house were surface-capped with an amphiphilic polymer to achieve good colloidal stability in aqueous buffer solutions. The scFv4D5 mini-anti- bodies were grafted onto the UCNPs via a high-affinity molecular linker barstar:barnase (Bs:Bn) to allow their spe- cific binding to the human epidermal growth factor receptor HER2/neu, which is overexpressed in human breast adenocarcinoma cells SK-BR-3. UCNP-Bs:Bn-scFv4D5 biocomplexes exhibited high-specific immobilization on the SK-BR-3 cells with the optical contrast as high as 10∶1 benchmarked against a negative control cell line. Breast cancer optical diagnostics was experimentally modeled by means of epi-luminescence imaging of a mono- layer of the UCNP-labeled SK-BR-3 cells buried under a breast tissue mimicking optical phantom. The experimental results were analyzed theoretically and projected to in vivo detection of early-stage breast cancer. The model pre- dicts that the UCNP-assisted cancer detection is feasible up to 4 mm in tissue depth, showing considerable potential for diagnostic and image-guided surgery applications. © The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI. (DOI: 10 .1117/1.JBO.18.7.076004)

High-affinity molecular pairs provide a convenient and flexible modular base for the design of molecular probes and protein/antigen assays. Specificity and sensitivity performance indicators of a bioassay critically depend on the dissociation constant (K(D)) of the molecular pair, with avidin:biotin being the state-of-the-art molecular pair (K(D) ∼ 1 fM) used almost universally for applications in the fields of nanotechnology and proteomics. In this paper, we present an alternative high-affinity protein pair, barstar:barnase (K(D) ∼ 10 fM), which addresses several shortfalls of the avidin:biotin system, including non-negligible background due to the non-specific binding. A quantitative assessment of the non-specific binding carried out using a model assay revealed inherent irreproducibility of the [strept]avidin:biotin-based assays, attributed to the avidin binding to solid phases, endogenous biotin molecules and serum proteins. On the other hand, the model assays assembled via a barstar:barnase protein linker proved to be immune to such non-specific binding, showing good prospects for high-sensitivity rare biomolecular event nanoproteomic assays.

The unique luminescent properties of new-generation synthetic nanomaterials, upconversion nanoparticles (UCNPs), enabled high-contrast optical biomedical imaging by suppressing the crowded background of biological tissue autofluorescence and evading high tissue absorption. This raised high expectations on the UCNP utilities for intracellular and deep tissue imaging, such as whole animal imaging. At the same time, the critical nonlinear dependence of the UCNP luminescence on the excitation intensity results in dramatic signal reduction at (similar to 1 cm) depth in biological tissue. Here, we report on the experimental and theoretical investigation of this trade-off aiming at the identification of optimal application niches of UCNPs e. g. biological liquids and subsurface tissue layers. As an example of such applications, we report on single UCNP imaging through a layer of hemolyzed blood. To extend this result towards in vivo applications, we quantified the optical properties of single UCNPs and theoretically analyzed the prospects of single-particle detectability in live scattering and absorbing bio-tissue using a human skin model. The model predicts that a single 70-nm UCNP would be detectable at skin depths up to 400 mm, unlike a hardly detectable single fluorescent (fluorescein) dye molecule. UCNP-assisted imaging in the ballistic regime thus allows for excellent applications niches, where high sensitivity is the key requirement

The development of targeted constructs on the basis of photoluminescent nanoparticles with a high photo- and chemical stability and absorption/emission spectra in the transparency window of biological tissues is an important focus area of present-day medical diagnostics. In this work, a targeted two-component construct on the basis of upconversion nanophosphors (UCNPs) and anti-tumor 4D5 scFv was developed for selective labeling of tumor cells overexpressing the HER2 tumor marker characteristic of a number of human malignant tumors. A high affinity barnase : barstar (Bn : Bs) protein pair, which exhibits high stability in a wide range of pH and temperatures, was exploited as a molecular adapter providing self-assembly of the two-component construct. High selectivity for the binding of the two-component 4D5 scFv-Bn : UCNP-Bs construct to human breast adenocarcinoma SK-BR-3 cells overexpressing HER2 was demonstrated. This approach provides an opportunity to produce similar constructs for the visualization of different specific markers in pathogenic tissues, including malignant tumors.