Search

The contamination of the widely used lifesaving anticoagulant drug heparin in 2007 has drawn renewed attention to the challenges that are associated with the characterization, quality control and standardization of complex biological medicines from natural sources. Heparin is a linear, highly sulfated polysaccharide consisting of alternating glucosamine and uronic acid monosaccharide residues. Heparin has been used successfully as an injectable antithrombotic medicine since the 1930s, and its isolation from animal sources (primarily porcine intestine) as well as its manufacturing processes have not changed substantially since its introduction. The 2007 heparin contamination crisis resulted in several deaths in the United States and hundreds of adverse reactions worldwide, revealing the vulnerability of a complex global supply chain to sophisticated adulteration. This Perspective discusses how the US Food and Drug Administration (FDA), the United States Pharmacopeial Convention (USP) and international stakeholders collaborated to redefine quality expectations for heparin, thus making an important natural product better controlled and less susceptible to economically motivated adulteration.

Simple alcohols formed protonated acetonitrile adducts containing up to two acetonitrile molecules when analyzed by ESI or APCI in the presence of acetonitrile in the solvent. These acetonitrile adducts underwent dissociation to form a nitrilium ion, also referred to as the substitution ion. Diols and triols behaved differently. In ESI, they formed only one acetonitrile adduct containing one acetonitrile. The S ion was not observed in ESI and was only weakly observed from the dissociation of the (M + ACN + H)(+) ion. On the other hand, the S ion was abundantly formed from the diols in APCI. This formation of acetonitrile adducts and substitution ion from simple alcohols/diols offers an opportunity to detect simple alcohols/diols sensitively by LC-MS interfaced by ESI or APCI. The utility of this chemistry was demonstrated in a method developed for the quantification of cyclohexanol in rat plasma by monitoring the CID-induced fragmentation from the S ion to a fragment ion.

The overall structure of pertussis toxoid has been established by analysis of its tryptic digest using two-dimensional liquid chromatography-tandem mass spectrometry (2D-LC-MS/MS), capillary liquid chromatography-matrix-assisted laser desorption ionization-tandem mass spectrometry (CapLC-MALDI-MS/MS), and ultraperformance liquid chromatography-mass spectrometry(E) (UPLC-MS(E)). In addition to oxidation and hydrolysis of amino acids losses of terminal peptides are observed. On-line UPLC-MS(E) generated a similar sequence coverage as the other two methods that involved off-line fraction collection. In light of recent favorable comparisons to data-dependent acquisition, UPLC-MS(E) should be the initial method of choice for analysis of a peptide mixture of moderate complexity.

In late 2007 and early 2008, a cluster of adverse events in patients receiving Heparin Sodium Injection occurred in the United States and in some countries in Europe. The adverse events were reported as being "allergic type" reactions, chiefly characterized by acute hypotension, nausea, and shortness of breath. The root cause of the cluster of adverse events was determined to be a contamination of the heparin by oversulfated chondroitin sulfate. The isolation and structure determination of this contaminant was accomplished by an FDA-led consortium of academic and government laboratories and independently by Baxter Healthcare, whose vial products were first identified in the USA as being associated with the adverse events. Oversulfated chondroitin sulfate was shown to produce acute hypotension in animal models, demonstrating that it was most likely the causative agent responsible for certain of the reported adverse events in patients receiving the contaminated heparin products.

Monosaccharide analysis is a critical way to profile the composition of complex carbohydrates. Methods to analyze neutral and amino sugars have been established for a long time, but methods for acidic sugars are rare. The acidic sugars, including uronic acids and sialic acids, are also important components in some complex carbohydrates. In this report, a high-performance anion-exchange chromatography method with pulsed amperometric detection was initially developed to analyze acidic sugars including different uronic acids and sialic acids. Subsequently, a method to profile complete monosaccharides, including most neutral, amino, and acidic sugars, was developed. This method has a limit of quantitation of ~12.5 × 10(-3) nmol for each sugar as well as good linearity over a wide range. This is a convenient procedure because it avoids additional derivatization of monosaccharides and has a broad application to a wide range of complex carbohydrates. The monosaccharide compositions of a variety of complex carbohydrates such as different glycosaminoglycans, alginate, fucoidan, and glycans were profiled by this comprehensive method. In addition, the hydrolysis patterns of these complex carbohydrates are discussed.

This study examines the impact, from a leachables perspective, of charging a solution contact component of a polymeric solution container. By charging such a container component, one provides a new source of leachable solutes. The distribution of these leachables within a three phase system (the original container, the new component and the solution) will determine the impact of the container change. Extraction of a material, coupled with chromatographic and/or spectroscopic analysis of the resultant extracts, provides the material's leachable profile. The total organic carbon (TOC) content of the extracts is introduced as a species non-specific measure of the total extractable burden. Leaching models are developed for the container and its changed component by correlating these material's interaction constants with solvent/solvent partition coefficients of model solutes. The solvent-solvent partition coefficients of the members of the leachable profile, as well as the partition coefficients of the composite TOC, are determined. The leaching models are coupled with the leachable's partition coefficients to allow for a prediction of leachable accumulation in a specific product design. These predictions reconcile well with actual experimental observations.

In late 2007 and early 2008, a cluster of adverse events in patients receiving Heparin Sodium Injection occurred in the United States and in some countries in Europe. The adverse events were reported as being "allergic type" reactions, chiefly characterized by acute hypotension, nausea, and shortness of breath. The root cause of the cluster of adverse events was determined to be a contamination of the heparin by oversulfated chondroitin sulfate. The isolation and structure determination of this contaminant was accomplished by an FDA-led consortium of academic and government laboratories and independently by Baxter Healthcare, whose vial products were first identified in the USA as being associated with the adverse events. Oversulfated chondroitin sulfate was shown to produce acute hypotension in animal models, demonstrating that it was most likely the causative agent responsible for certain of the reported adverse events in patients receiving the contaminated heparin products.

Anionic polysaccharides, such as glycosaminoglycans (GAGs) and alginate, readily undergo source-induced fragmentation when analyzed by electrospray mass spectrometry with the use of high source cone voltage. The dissociation chemistry converts all components of a polysaccharide into a small set of structurally characteristic small saccharides. This chemistry enables the collective detection of a polysaccharide through the detection of one or more small saccharides. This ability, combined with the elution of polysaccharides as relatively compact bands using ion-pairing reverse phase liquid chromatography, created a unique opportunity for the development of LC–MS methods suitable for the quantitative analysis of intact anionic polysaccharides. Feasibility of this approach is demonstrated with a mixture of heparin, chondroitin sulfate A, and alginate.

This article addresses the identification and quantification of the chemical species resulting in resonances at 2.17 and 2.25 ppm in the (1)H nuclear magnetic resonance (NMR) spectrum of pharmaceutical-grade heparin sodium. The NMR signals in question were first confirmed to arise from chemical moieties covalently attached to the heparin molecule through NMR diffusion experiments as well as chemical treatment of heparin active pharmaceutical ingredient (API) containing the resonances. The material responsible for the extra NMR signals was then demonstrated by NMR spiking studies to be something other than oversulfated chondroitin sulfate and was finally identified as an O-acetylation product of heparin through (13)C labeling experiments with subsequent NMR analysis. The extent of O-acetylation was quantified using three orthogonal techniques: (1)H NMR, ion chromatography, and headspace gas chromatography/mass spectrometry. The results of this work showed good agreement between the three quantitative methods developed to analyze the signals in the United States Pharmacopeia-specified region of 2.12-3.00 ppm for heparin API.

Pertussis toxoid, an acellular pertussis vaccine prepared by hydrogen peroxide treatment in the presence of Fe(3+), has not been well characterized. Because the toxoid has been a part of the DTaP vaccine for infants, it is of interest and significance to have a clear understanding of its structure. The five subunits of pertussis toxin (PT) have a combined molecular weight of approximately 95,000Da. The peroxide treatment in toxoid formation introduces additional complexity into the protein sequence. To maximize sequence coverage, a two-dimensional liquid chromatography-tandem mass spectrometry (2D LC-MS/MS) approach was used to analyze the tryptic digest of toxoid as a whole. An analytical-scale high-performance liquid chromatography (HPLC) instrument using a pentafluorophenyl (PFP) column was used as the first-dimensional LC for fraction collection. The fractions were then analyzed by nanoLC-MS/MS using a C18 column to acquire collision-activated dissociation (CAD) spectra of the tryptic peptides. It is shown that a PFP column has a different peptide retention specificity from a C18 column. A combination of a PFP column and a C18 column is a viable approach for dispersing peptides in a complex mixture. From the structures of 65 peptides that represented approximately 50% of its sequence, PT was found to have sustained heavy oxidative damages during toxoid preparation. Nearly all methionine, cysteine, and (likely) tryptophan residues were oxidized. Evidence of histidine and tyrosine oxidation was also observed. In addition, a large percentage of asparagine was found hydrolyzed to aspartic acid. These findings corrrelate well with the reduction of PT toxicity by peroxide treatment.

A model allowing for the prediction of the thermodynamically constrained accumulation of leachables migrating from polymeric containers has been developed. The model predicts accumulation based on three accumulation-limiting mechanisms: total available pool, solute solubility and solute partitioning. Equations relating a solute's solvent-water partition coefficients ( P o - w and P h - w ) and its aqueous solubility and partitioning properties have been developed. Thus, one can predict leachable accumulations from the physical dimensions of the system being studied (container weight and solution volume) and from the solute's partition coefficients. The maximal accumulation of the leachable in solution will be the lowest value predicted via the three accumulation-limiting mechanisms. The model has been successfully applied to the migration of 2-ethylhexanoic acid out of a styrene-butadiene-styrene block co-polymer and accurately predicts the accumulation behavior of this species as a function of solution pH.

Liquid chromatography-mass spectrometry (LC-MS) with a dual spray electrospray ionization source has been used to measure the molecular weights of pertussis toxin (PT) subunits. Measurement accuracy better than 0.4 Da was achieved for all PT subunits in the molecular weight range of 11,000 to 27,000 Da. At this mass assignment accuracy level, the sequences of the PT subunits investigated in this study are easily determined based on molecular weight alone. The subunits 1, 2, and 5 of PT were observed to undergo oxidation under normal storage conditions as ammonium sulfate suspension at 2 to 8 degrees C. These oxidized subunits can be separated completely or partially by reverse-phase high-performance liquid chromatography (HPLC) from their native counterparts. For the determination of oxidation sites, the oxidized subunits and their nonoxidized counterparts were fraction collected, trypsin digested, and mapped by LC-MS. The oxidized peptides and their nonoxidized counterparts were further studied by liquid chromatography-tandem mass spectrometry (LC-MS/MS) to confirm their identities. The methionines at position 212 of subunit 1, at position 89 of subunit 2, and at position 40 of subunit 5 were found to be the primary sites of oxidation.

Several aminocyclitol-aminoglycoside antibiotics have been studied by tandem mass spectrometry. Glycosidic bond cleavages were the major reactions in the low energy collisionally activated decomposition (CAD) of the protonated antibiotics. Only the glycoside residing on the C6O of the 2-deoxystreptamine was observed to undergo significant decomposition at the C2C3 and OC1 bonds. The comprehension of the CAD of known aminoglycosides aided in the identification of an unknown impurity in tobramycin. The unknown compound was initially detected by reverse phase high-performance liquid chromatography following dinitrofluorobenzene derivatization of the amino groups. The molecular weight of the dinitrobenzene derivative measured by LC mass spectrometry (MS) led to the detection of two isomeric impurities in tobramycin by LC-MS using an amino column. Their CAD spectra were subsequently acquired by LC-MS/MS. One of the two compounds was determined to be a known compound, 6″-O-carbamyltobramycin with the carbamyl group substituted on the glycoside residing on the C6O of 2-deoxystreptamine. The fragmentation pattern of the other compound was interpreted as that the unknown was also a carbamyltobramycin. The carbamyl group was, however, substituted on 2-deoxystreptamine. It was speculated that the carbamyl group was substituted at the C1 amino group. This compound, to our knowledge, has not been reported before.

High-field nuclear magnetic resonance spectroscopy, mass spectrometry, infrared spectroscopy, and ultraviolet spectroscopy were used to determine the structures of two novel degradation productions of the penicillins sodium nafcillin (1) and sodium oxacillin (2). The degradation products of compounds (1) and (2) were found to possess the novel thietan-2-one structures (3)and (4), respectively. The structure of compound (4) was confirmed by chemical synthesis via two independent routes. The structure of compound (3) was confirmed by single-crystal X-ray crystallography.

Stack-collected coal fly ash from western low-sulfur coal was extracted with 60:40 benzene/methanol. This extract was fractionated by preparative-scale high performance liquid chromatography (HPLC) and the mutagenic activity of 14 fractions was evaluated by microbial assay with Salmonella typhimurium TA1538. A widespread distribution of direct-acting mutagens, which probably includes both mono- and dinitroaromatics, was detected. HPLC methods were also used to isolate 1-nitropyrene from the total benzene/methanol extract. The identification of 1-nitropyrene was based on gas chromatographic and HPLC retention measurements and mass spectral data. The concentration of 1-nitropyrene in the ash extract was determined by quantitative HPLC analyses. Mutagenicity assays of the total extract and an authentic 1-nitropyrene standard with Salmonella strains TA1538, TA100, and TA98 indicated that the 1-nitropyrene accounts for approximately 0.03-0.16% of the total mutagenic activity of the extract.

Mechanisms for decomposition of 1- and 2-phenyltetralins were investigated using low resolution mass spectrometry and metastable ion techniques. Four primary decompositions were observed for 1-phenyltetralin radical cations: (1) the loss of C6H6 via a 1,4-elimination; (2) the elimination of ethene via competing losses from carbons 3 + 4 and carbons 2 + 3; (3) the loss of C8H8, probably through a stepwise Diels-Alder cycloreversion to expel styrene; and (4) the loss of methyl radical involving carbon 2 and possibly carbon 4. Three major decompositions were observed for 2-phenyltetralin radical cations: (1) the loss of C8H8, possibly through a Diels-Alder cycloreversion to expel styrene; (2) the loss of C6H6 via a 1,3 elimination; and (3) the loss of methyl radical from carbon 1. Various exchange reactions occur prior to these losses, but they proved to be incomplete even for metastable ions.

The isomeric pairs [CH3CN]+˙ and [CH2CNH]+˙ and [CH3NC]+˙ and [CH2NCH]+˙ have been established as stable, noninterconverting structures. The conclusion derives from studies of collision induced decomposition spectra. The same conclusion pertains for the ions [CH3CH2CN]+˙ and [CH3CHCNH]+˙, and for [NCCH2CH2CN]+˙, [HNCCHCH2CN]+˙ and [HNCCHCHCNH]+˙. The energy barrier of a [1,3]-hydrogen shift, a possible isomerization mechanism, is determined to be at least 163 kJ mol−1 for the [CH3CN]+˙ and [CH2CNH]+˙ pair, and the barrier may be as high as 318 kJ mol−1. The C3H5N and C4H4N2 radical cations decompose before they can be activated with 318 kJ mol−1 of internal energy.

Premiere preuve directe d'un intermediaire de type radical cationique-1,4 dans la cycloaddition [2+1] de radicaux cationiques d'alcenes et d'alcenes neutres

A high resolution MS/MS instrument comprising electrostatic analyzer, magnetic sector, electrostatic analyzer (EBE) is described. Analytical applications of this instrument require high resolution mass selection, high dynamic range and good transmission for collision-induced decomposition (CID) fragments. Suitable experiments are reported as an evaluation of these requirements. It is found that CID spectra can be obtained for ion components separated at a mass resolution of 100 000. At lower resolving powers, a dynamic range of 100 000 for mixture constituents is demonstrated. Finally, a transmission of 4% for ion fragments produced in CID from methane is established.

A multiple-stage method is described for the separation and identification of neutral polycyclic aromatic hydrocarbons in complex coal liquids. This method results in chemically less complex sub-fractions which enable more detailed characterisation of both trace level and major neutral PAH components. The applicability of this multi-stage separation method is demonstrated with an SRC-II material.

Premiere preuve directe d'un intermediaire de type radical cationique-1,4 dans la cycloaddition [2+1] de radicaux cationiques d'alcenes et d'alcenes neutres

Stack-collected fly-ash particles from a commercial pulverized-coal power plant were extracted with 60/40 w/w benzene-methanol to remove as much of the organic fraction as possible. The extract was sequentially fractionated on a series of high-performance liquid chromatography columns, and the Salmonella bacterial mutagenicity assay using both normal and nitroreductase-deficient strains was used to localize the most mutagenic fractions. Selected fractions were analyzed by a variety of techniques, including gas chromatography with dual-flame ionization and thermionic nitrogen-phosphorus detectors, gas chromatography-mass spectrometry, direct-probe low-resolution or low-voltage mass spectrometry, and high-resolution mass spectrometry. Mutagenicity data indicated that nitroorganic compounds were the primary mutagens in all samples submitted for chemical analysis. A series of homologous alkylated nitrophenanthrenes appear to be important mutagens in one major fraction, while alkylated nitrofluorenones appear to be the dominant mutagens in a second major fraction. No nitro compounds were identified in a third major fraction. In addition to the nitro compounds, substantial amounts of fluorenones were also found, although these are not believed to contribute to the direct-acting mutagenic activity of the samples.