Search

Understanding exercise metabolism and the relationship with volatile organic compounds (VOCs) holds potential in both health care and sports performance. Exercise metabolism can be investigated using whole body exercise testing (in vivo) or through the culture and subsequent electrical pulse stimulation (EPS) of myotubes (in vitro). This research investigates the novel headspace (HS) analysis of EPS skeletal muscle myotubes. An in vitro system was built to investigate the effect of EPS on the volatile constituents in the HS above EPS skeletal muscle. The C2C12 immortalised cell line was chosen. EPS was applied to the system to induce myotube contraction. The in vitro system was applied to the analysis of VOCs using thermal desorption (TD) sampling. Samples were collected under four conditions: environmental samples (enviro), acellular media HS samples (blank), skeletal muscle myotubes without stimulation HS samples (baseline) and EPS of skeletal muscle myotube HS samples (stim). TD sampling combined with gas-chromatography mass spectrometry (GC-MS) detected two compounds that, after multivariate and univariate statistical analysis, were identified as changing due to EPS (p < 0.05). These compounds were tentatively assigned as 1,4-Dioxane-2,5-dione, 3,6-dimethyl- and 1-pentene. The former is a known lactide and the latter has been reported as a marker of oxidative stress. Further research should focus on improvements to the EPS system, including the use of more relevant cell lines, quantification of myotube contractions, and the application of targeted analysis, metabolic assays and media analysis. [ABSTRACT FROM AUTHOR]

Recent developments in aircraft electrical technology, such as the design and production of more electric aircraft (MEA) and major steps in the development of all-electric aircraft (AEA), have had a significant impact on aircraft's electrical power systems (EPSs). However, the EPSs of the latest aircraft produced by the main players in the market, Airbus with the Neo series and Boeing with the NG and MAX series are still completely traditional and based on the constant speed constant frequency (CSCF) configuration. For alternating current ones, the EPS is composed of the following: prime movers, namely the aircraft turbofan engine (TE); the electrical power source, i.e., the integrated drive generator (IDG); the command and control system, the generator control unit (GCU); the transmission and the system distribution system; the protection system, i.e., the CBs (circuit breakers); and the electrical loads. This paper presents the analysis of this system using the Simscape package from Simulink v 8.7, a MATLAB v 9.0 program, which is actually the development of some systems designed in two previous personal papers. For the first time in the literature, a complete MATLAB modelled EPS system was presented, i.e., the aircraft turbofan engine model, driving the constant speed drive system (CSD) (model presented in the first reference as a standalone type and with different parameters), linked to the synchronous generator (SG) (model presented in second reference for lower power and rotational speed) in the so-called integrated drive generator (IDG) and electrical loads. [ABSTRACT FROM AUTHOR]

Biological treatment is currently a favorable option to treat wastewater due to its environmentally friendly methods and minimal toxic by-products. The majority of biological wastewater treatment uses bacteria as treatment agents, which are known to have excellent capabilities for removing various pollutants. Researchers have extensively explored the use of extracellular polymeric substances (EPSs) generated by bacteria in wastewater treatment. This review focuses on the sources of EPSs, factors influencing their production, and their role in wastewater treatment. Bacterial species, nutrient availability, pH, temperatures, and the presence of toxins were mentioned to be the factors influencing EPS production by bacteria in wastewater treatment. Produced EPSs by bacteria may promote the aggregation, adsorption, decolorization, and degradation of pollutants. This review highlights the challenges of discovering new potential bacterial species and complex EPS extraction methods, as well as the importance of mass production for larger-scale applications. [ABSTRACT FROM AUTHOR]

In recent years, the world population has steadily increased and substantially demands infrastructure development, so construction on even low-quality soil has become almost inevitable. Geosynthetic-reinforced solution has gained popularity for improving such soil properties because of its positive benefits. Crucial progress has been made till date using various laboratory analyses, numerical simulations, and analytical approaches to enhance its performance. However, researchers are still working on design optimisation. The current study focuses on various analysis methods and design aspects of geosynthetic-reinforced soil (GRS) that illustrate load-sharing mechanism and performance under externally applied load. The majority of research work around the globe is collected and thoroughly studied. Finally, the present research trends and future forecasts are deliberated. Past studies indicate that a) digital image correlation (DIC) technology provides a better understanding of the GRS failure mechanism, b) expanded polystyrene beads (EPS) emerging as a new subgrade infill material which significantly enhances damping behaviour of GRS in cyclic loading interface whereas fibreglass-geosynthetic a newer reinforcement material. It is evident from past studies that geosynthetic-reinforced solution is evolving as a promising ground improvement technique; hence, there exists an expansive scope for future research on GRS behaviour, including newer geosynthetics with resilience and sustainability factors. [ABSTRACT FROM AUTHOR]

This study aims to analyze the effect of Net Profit Margin, Return on Asset and Earning Per Share on the stock price of Idx Sharia Growth 30 companies listed on the Indonesia Stock Exchange (IDX). The approach in this study is to use a quantitative approach and based on its objectives, this type of research is causal, namely research that explains the influence of an independent variable on bound variables. The population of this study is 30 Idx Sharia Growth 30 companies listed on the Indonesia Stock Exchange (IDX) in 2020-2023. The procedure for determining samples using the purposive sampling method is a sampling method that uses certain considerations. Based on the results of the selection, all companies meet the criteria. The independent variables in this study are Net Profit Margin, Return on Asset and Earning Per Share and the dependent variable is the stock price. Data analysis uses multiple linear regression analysis. The results of the analysis show that Net Profit Margin, Return on Asset and Earning Per Share have a positive and significant effect on stock prices. The results of the Coefficient of Determination showed that the Adjusted R-squared value was 63.2% and the remaining 36.8% was influenced by other factors that were not present in this study. [ABSTRACT FROM AUTHOR]

A Leuconostoc mesenteroides strain (SJC113) isolated from cheese curd was found to produce large amounts of a mucoid exopolysaccharide (EPS). An analysis revealed the glucan nature of the EPS with 84.5% (1→6)-linked α-d-glucose units and 5.6% (1,3→6)-linked α-d-glucose units as branching points. The EPS showed 52% dextranase resistance and a yield of 7.4 ± 0.9 g/L from MRS medium supplemented with 10% sucrose within 48 h. Ln. mesenteroides SJC113 was also characterized and tested for the production of EPS as a fat substitute in fresh cheese. Strain SJC113 showed high tolerance to a wide range of NaCl concentrations (2, 5 and 10%), high β-galactosidase activity (2368 ± 24 Miller units), cholesterol-reducing ability (14.8 ± 4.1%), free radical scavenging activity (11.7 ± 0.7%) and hydroxyl scavenging activity (15.7 ± 0.4%). The strain had no virulence genes and was sensitive to clinically important antibiotics such as ampicillin, tetracycline and chloramphenicol. Ln. mesenteroides SJC113 produced highly viscous EPS during storage at 8 °C in skim milk with 5% sucrose. Therefore, these conditions were used for EPS production in skim milk before incorporation into fresh cheese. Four types of fresh cheese were produced: full-fat cheese (FF) made from pasteurized whole milk, non-fat cheese (NF) made from pasteurized skim milk, non-fat cheese made from skim milk fermented with Ln. mesenteroides without added sugar (NFLn0) and non-fat cheese made from skim milk fermented with Ln. mesenteroides with 5% sucrose (NFLn5). While the NF cheeses had the highest viscosity and hardness, the NFLn5 cheeses showed lower firmness and viscosity, higher water-holding capacity and lower weight loss during storage. Overall, the NFLn5 cheeses had similar rheological properties to full-fat cheeses with a low degree of syneresis. It was thus shown that the glucan-type EPS produced by Ln. mesenteroides SJC113 can successfully replace fat without altering the texture of fresh cheese. [ABSTRACT FROM AUTHOR]

A large number of recalcitrant bacterial pathogens cannot be easily treated by antibiotics due to the existence of biofilm. Hence, an alternative strategy needs to be adopted to remove the biofilm without the development of antibiotic resistance. Bacteriocins, ribosome-mediated bacterial proteinaceous toxins, are found to have the potential to inhibit the growth of bacteria. In the present study, leucocin, extracted and purified from previously isolated bacteriocin-producing strain Leuconostoc lactis, showed a marked reduction (around 80%) in the growth of planktonic cells of Gram-negative Escherichia coli ATCC 25,922 compared to Nisin, a reference bacteriocin, and tetracycline, a conventional antibiotic. The considerable inhibition of the biofilm forming sessile cells with no significant cell revival even after removal of the treatment was also perceived. The scanning electron micrographs showed the considerable antibiofilm activities of the bacteriocin against the test organism. The bacteriocin treatment-mediated changes in the functional groups of the biofilm matrices are clearly visible from FTIR analysis. The confocal microscopic images showed the affinity of the bacteriocin towards the genetic material of the test organism and the reduction of the biofilm forming cells, which confirms the higher competence of the present leucocin as an antibiofilm agent in order to replace the conventional antibiotic. [ABSTRACT FROM AUTHOR]

Background: Symptoms of dyspepsia are usually encountered by chronic kidney disease patients. Abdominal discomfort is commonly seen in CKD patients with no other causes of organic affection. Aim: to determine the prevalence of functional dyspepsia in CKD patients, and which subtype is predominant in them. Materials and patients: This observational study included 150 CKD patients. Clinical and laboratory data were recorded for every patient. All the patients were interviewed using the ROME IV questionnaire of functional dyspepsia. Patients fulfilling criteria for functional dyspepsia were exposed to upper GI endoscopy. Results: Overall, 73 (48.7%) of CKD patients were males and 77 (51.3%) were females with mean age of (45.71 ± 9.59) and mean BMI (26.58 ± 5.39). The frequency of functional dyspepsia among CKD patients was determined to be 14.7% (22 out of 150 patients). Among those affected by functional dyspepsia, the most prevalent subtype was found to be Epigastric Pain Syndrome (EPS), accounting for 59% (13 out of 22 cases). The most common predictor of FD in CKD patients was chronic HCV infection, hemodialysis, stage of CKD and eGFR as revealed by Univariate regression analysis. Conclusion: The prevalence of FD amongst CKD patients is 14.7% with EPS the predominant subtype. Male patients, HCV patients, patients with higher CKD stages and highly impaired eGFR (low eGFR) are more probable to have FD. [ABSTRACT FROM AUTHOR]

The characteristic feature of chronic peritoneal damage in peritoneal dialysis (PD) is a decline in ultrafiltration capacity associated with pathological fibrosis and angiogenesis. The pathogenesis of peritoneal fibrosis is attributed to bioincompatible factors of PD fluid and peritonitis. Uremia is associated with peritoneal membrane inflammation that affects fibrosis, neoangiogenesis, and baseline peritoneal membrane function. Net ultrafiltration volume is affected by capillary surface area, vasculopathy, peritoneal fibrosis, and lymphangiogenesis. Many inflammatory cytokines induce fibrogenic growth factors, with crosstalk between macrophages and fibroblasts. Transforming growth factor (TGF)-β and vascular endothelial growth factor (VEGF)-A are the key mediators of fibrosis and angiogenesis, respectively. Bioincompatible factors of PD fluid upregulate TGF-β expression by mesothelial cells that contributes to the development of fibrosis. Angiogenesis and lymphangiogenesis can progress during fibrosis via TGF-β–VEGF-A/C pathways. Complement activation occurs in fungal peritonitis and progresses insidiously during PD. Analyses of the human peritoneal membrane have clarified the mechanisms by which encapsulating peritoneal sclerosis develops. Different effects of dialysates on the peritoneal membrane were also recognized, particularly in terms of vascular damage. Understanding the pathophysiologies of the peritoneal membrane will lead to preservation of peritoneal membrane function and improvements in technical survival, mortality, and quality of life for PD patients. [ABSTRACT FROM AUTHOR]

Recent studies show that biofilm substances in contact with nanoplastics play an important role in the aggregation and sedimentation of nanoplastics. Consequences of these processes are changes in biofilm formation and stability and changes in the transport and fate of pollutants in the environment. Having a deeper understanding of the nanoplastics–biofilm interaction would help to evaluate the risks posed by uncontrolled nanoplastic pollution. These interactions are impacted by environmental changes due to climate change, such as, e.g., the acidification of surface waters. We apply fluorescence correlation spectroscopy (FCS) to investigate the pH-dependent aggregation tendency of non-functionalized polystyrene (PS) nanoparticles (NPs) due to intermolecular forces with model extracellular biofilm substances. Our biofilm model consists of bovine serum albumin (BSA), which serves as a representative for globular proteins, and the polysaccharide alginate, which is a main component in many biofilms, in solutions containing Na+ with an ionic strength being realistic for fresh-water conditions. Biomolecule concentrations ranging from 0.5 g/L up to at maximum 21 g/L are considered. We use non-functionalized PS NPs as representative for mostly negatively charged nanoplastics. BSA promotes NP aggregation through adsorption onto the NPs and BSA-mediated bridging. In BSA–alginate mixtures, the alginate hampers this interaction, most likely due to alginate–BSA complex formation. In most BSA–alginate mixtures as in alginate alone, NP aggregation is predominantly driven by weaker, pH-independent depletion forces. The stabilizing effect of alginate is only weakened at high BSA contents, when the electrostatic BSA–BSA attraction is not sufficiently screened by the alginate. This study clearly shows that it is crucial to consider correlative effects between multiple biofilm components to better understand the NP aggregation in the presence of complex biofilm substances. Single-component biofilm model systems based on comparing the total organic carbon (TOC) content of the extracellular biofilm substances, as usually considered, would have led to a misjudgment of the stability towards aggregation. [ABSTRACT FROM AUTHOR]

Copyright of Technology of Water Treatment is the property of Technology of Water Treatment Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The extracellular matrix of most bacterial biofilms contains polysaccharides, proteins, and nucleic acids. These biopolymers have been shown to mediate fundamental biofilm-related phenotypes including surface attachment, intercellular adhesion, and biocide resistance. Enzymes that degrade polymeric biofilm matrix components, including glycoside hydrolases, proteases, and nucleases, are useful tools for studying the structure and function of biofilm matrix components and are also being investigated as potential antibiofilm agents for clinical use. Dispersin B is a well-studied, broad-spectrum antibiofilm glycoside hydrolase produced by Aggregatibacter actinomycetemcomitans. Dispersin B degrades poly-N-acetylglucosamine, a biofilm matrix polysaccharide that mediates biofilm formation, stress tolerance, and biocide resistance in numerous Gram-negative and Gram-positive pathogens. Dispersin B has been shown to inhibit biofilm and pellicle formation; detach preformed biofilms; disaggregate bacterial flocs; sensitize preformed biofilms to detachment by enzymes, detergents, and metal chelators; and sensitize preformed biofilms to killing by antiseptics, antibiotics, bacteriophages, macrophages, and predatory bacteria. This review summarizes the results of nearly 100 in vitro and in vivo studies that have been carried out on dispersin B since its discovery 20 years ago. These include investigations into the biological function of the enzyme, its structure and mechanism of action, and its in vitro and in vivo antibiofilm activities against numerous bacterial species. Also discussed are potential clinical applications of dispersin B. [ABSTRACT FROM AUTHOR]

This article explains how a type 2 fuzzy logic controller can improve the torque of a 3-phase Permanent Magnet Synchronous Motor (PMSM) in an electric power steering system. The goal is to ensure effective electric power steering under various road conditions and speeds. The implementation of type-2 Type-2 Fuzzy Logic Controller (FLC) involves fuzzification, inference, and output processing. Type-reduction methods are more advanced than type-1 defuzzification methods, handling more rule uncertainties. While computationally demanding, a simple type-reduction computation process is outlined for interval type-2 fuzzy sets. The type 2 fuzzy logic controller algorithm manages the PMSM motor using Field-Oriented Control (FOC), adjusting the motor voltage based on torque, speed, and steering angle sensor inputs. The study's results provide a solid basis for future research on designing and controlling electric power steering systems with precision and efficiency. This research sets the stage for improved electric power steering systems, contributing to the development of intelligent automotive technologies. [ABSTRACT FROM AUTHOR]

The damage caused by corrosion in metallic materials is a problem that produces substantial economic and environmental costs. According to the World Bank, the global annual GDP (Gross Domestic Product) in corrosion costs was approximately 96.1 trillion US dollars for 2021, about 20% are due to the corrosion produced by the presence of bacteria, however there are no statistics related to environmental damages produced by this problem [1]. Microbial corrosion activity on metallic surfaces, cannot be classified as a corrosion type, but a process or mechanisms that can influence, accelerate and even initiate it, regardless the type of corrosion generated. The only necessary condition to initiate or accelerate the microbial corrosion on a metallic surface is the growth of biofilms. Biofilms are very complex systems, due to the large amount and types of microorganisms that can grow in it, the metabolic activities that can be developed, and the chemical products, which can attack the metallic materials, causing great deterioration. Due to the complex nature of these processes, specifics norms, procedures and methodologies of operation, patented or established to study, evaluate or fight the action of biofilms are scarce [2,3]. However, some industrial methods have being reported to mitigate their effects [4-7]. In this work it is presented an information review compiled by bibliographic search related to some relevant aspects about biofilms and microbial corrosion, electrochemistry, microscopic studies and preventive actions. [ABSTRACT FROM AUTHOR]

Copyright of Revista Entramado is the property of Universidad Libre Seccional Cali and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Historical buildings are substantially built with sedimentary rocks, especially limestone, and form an important component of a country's cultural heritage. The monuments are exposed to external environmental forces (humidity and temperature) that facilitate the proliferation of microorganisms and biofilms in an ecological succession. Feroz Shah Kotla is an ancient monument in Delhi, India, dating back to 1354 ad, and constructed of limestone, and with a discoloured façade now. The main objective of the present study was to characterise the biofilm present in areas of monuments exposed to sun and shaded areas, as influenced by two seasons—winter and monsoon (rainy), in terms of moisture, chlorophyll, protein and exopolysaccharide (EPS) as a function of carbohydrate concentration. The moisture, protein and EPS contents were higher in samples obtained from sun-exposed areas of rainy season samples and least in shaded areas of winter samples, while the chlorophyll content was highest in sun-exposed winter samples. The ICP-MS analysis showed that Ca concentration was highest (15,967.92 µg−1). Scanned electron microscope images show the presence of coccoid, bacillus and filamentous forms of microorganisms, and sparser in the dry season. The results of the present study provide significant clues that the deterioration of such ancient monuments is correlated to the establishment and continued presence of biofilms which eventually weaken and corrode the surface; appropriate conservation actions can be congruent in targeting biofilms successfully. [ABSTRACT FROM AUTHOR]

Copyright of Technology of Water Treatment is the property of Technology of Water Treatment Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Growing interest in probiotics has spurred research into their health benefits for hosts. This study aimed to evaluate the probiotic properties, especially antibacterial activities and the safety of two Weissella confusa strains, W1 and W2, isolated from Khao-Mahk by describing their phenotypes and genotypes through phenotypic assays and whole genome sequencing. In vitro experiments demonstrated that both strains exhibited robust survival under gastric and intestinal conditions, such as in the presence of low pH, bile salt, pepsin, and pancreatin, indicating their favorable gut colonization traits. Additionally, both strains showed auto-aggregation and strong adherence to Caco2 cells, with adhesion rates of 86.86 ± 1.94% for W1 and 94.74 ± 2.29% for W2. These high adherence rates may be attributed to the significant exopolysaccharide (EPS) production observed in both strains. Moreover, they exerted remarkable antimicrobial activities against Stenotrophomonas maltophilia, Salmonella enterica serotype Typhi, Vibrio cholerae, and Acinetobacter baumannii, along with an absence of hemolytic activities and antibiotic resistance, underscoring their safety for probiotic application. Genomic analysis corroborated these findings, revealing genes related to probiotic traits, including EPS clusters, stress responses, adaptive immunity, and antimicrobial activity. Importantly, no transferable antibiotic-resistance genes or virulence genes were detected. This comprehensive characterization supports the candidacy of W1 and W2 as probiotics, offering substantial potential for promoting health and combating bacterial infections. [ABSTRACT FROM AUTHOR]

Copyright of Jurnal Ilmu Manajemen Terapan (JIMT). is the property of Dinasti Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

[Display omitted] • High sugar, protein of sludge shows outstanding biodrying potential. • Low ventilation rate improved bio-drying cycle and water removal effect. • Revealed the contribution of different water types to water removal. • Lipid degradation role: Crucial for releasing and transforming bound water. • Energy-saving ventilation changes the degradation sequence of organic matter. The effectiveness of dehydration and utilization processes for citric acid dewatered sludge is hampered by its high concentrations of polysaccharides, proteins, and water-binding properties of microbial extracellular polymers (EPS). This research explores the efficacy and mechanisms involved in extracting water from this type of sludge using biological drying technology, with varying rates of ventilation. Especially pertinent was the use of low ventilation rates as control variables. Our results suggest that a scheduled intermittent ventilation at lower rates allows for the most efficient removal of water, achieving a rate of 41.71 % within eight days, according to the zero-order kinetic model. Remarkably, the peak temperature registered was 60 °C, reaching this threshold in just 0.1 days and maintaining high temperatures for approximately 5.9 days. Component analysis of organic matter illustrated a preferential degradation process for lipids under these ventilation conditions which is pivotal for releasing and transforming bound water for efficient extraction, as well as facilitating the breakdown of easily hydrolysable materials. Further, polysaccharide/protein (EPS) decomposition contributed to water removal, though less significantly. The periodic ventilation strategy allowed for the maximum cumulative temperature to be sustained, demonstrating superior efficiency in harnessing bio-generated heat (82.77 % for water evaporation), resulting in dry sludge suitable for self-sustained combustion at relatively low cost ($26.61/t). Highlighted by this study is the considerable potential of energy-efficient ventilation methods in the biological drying treatment of citric acid fermented sludge and similar industrial waste materials. [ABSTRACT FROM AUTHOR]

Polyhydroxyalkanoates (PHA) have received attention owing to their biodegradability and biocompatibility, with studies exploring PHA-producing bacterial strains. As vegetable oil provides carbon and monomer precursors for poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx)), oil-utilizing strains may facilitate PHA production. Herein, Cupriavidus necator BM3-1, which produces 11.1 g/L of PHB with 5% vegetable oil, was selected among various novel Cupriavidus necator strains. This strain exhibited higher preference for vegetable oils over sugars, with soybean oil and tryptone determined to be optimal sources for PHA production. BM3-1 produced 33.9 g/L of exopolysaccharides (EPS), which was three-fold higher than the amount produced by H16 (10.1 g/L). EPS exhibited 59.7% of emulsification activity (EI24), higher than that of SDS and of EPS from H16 with soybean oil. To evaluate P(3HB-co-3HHx) production from soybean oil, BM3-1 was engineered with P(3HB-co-3HHx) biosynthetic genes (phaCRa, phaARe, and phaJPa). BM3-1/pPhaCJ produced 3.5 mol% of 3HHx and 37.1 g/L PHA. BM3-1/pCB81 (phaCAJ) produced 32.8 g/L PHA, including 5.9 mol% 3HHx. Physical and thermal analyses revealed that P(3HB-co-5.9 mol% 3HHx) was better than PHB. Collectively, we identified a novel strain with high vegetable oil utilization capacity for the production of EPS, with the option to engineer the strain for P(3HB-co-3HHx). [ABSTRACT FROM AUTHOR]

Current study aims to investigate the determinants that has impacted on non-life insurance companies' profitability in Nepalese scenario. Four industries were selected as sample purposively. The data from 2011/12 to 2020/21 AD have been incorporated. The study has chosen to use a descriptive and correlational research design. The firm size, price earnings ratio, earnings per share, and claim paid are the predictors and profitability proxied by ROA was the predicted variable. The study found that the most prominent determinants for profitability in non-life insurance companies are EPS and company size. The PE ratio and claims paid have been found as less prioritized factors of the predicted variable. [ABSTRACT FROM AUTHOR]

Copyright of Technology of Water Treatment is the property of Technology of Water Treatment Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study aimed to analyze the effect of environmental disclosure on the financial performance of manufacturing companies in Indonesia and Singapore. The sample in this study consisted of 108 manufacturing companies from Indonesia and 102 manufacturing companies from Singapore. The data analysis technique used simple linear regression. The results of this study indicated that environmental disclosure affected financial performance (ROA, ROE, and NPM) in Indonesia. However, the research on the effect of Corporate Social Responsibility (CSR) on financial performance (ROA, ROE, and NPM) in Singapore showed the opposite results. Furthermore, the results of this study also showed that environmental disclosure did not affect EPS in Indonesia and Singapore. In addition, this study also proved that Indonesia and Singapore had different levels of CSR implementation in which Singapore had a better quality of CSR disclosure than Indonesia. Hopefully, the study can provide an overview of the non-monetary aspects that should be considered in investment.

The power limitations of nanosatellites, particularly during peak demand periods such as data transmission and maneuvering, hinder their operational capabilities. Traditional Electrical Power Subsystems relying solely on batteries face challenges in delivering the necessary power density and maintaining battery life, especially during eclipses. This study proposes an innovative Hybrid Energy Storage System for a 3U nanosatellite, integrating high-energy-density batteries with high-power-density supercapacitors, using an active parallel hybrid topology with two bidirectional converters and an optimal power management strategy. Using MATLAB and Simulink models, the study optimizes the Hybrid Energy Storage System by focusing on minimizing the capacity rate and depth of discharge to extend battery life. Simulation results show a 53.42% reduction in depth of discharge compared to a battery-only system, indicating a significant extension of battery life. Additionally, the proposed system allows for a minimal 2.08% increase in overall mass while maintaining enhanced performance. This research fills a critical gap in the literature by exploring active Hybrid Energy Storage System topologies for spacecraft applications, beyond the traditional passive and semi-active configurations. The innovative power management strategy ensures efficient energy utilization, significantly enhancing the reliability and efficiency of nanosatellite missions. The findings offer a practical solution to improve mission performance and extend the operational lifespan of nanosatellites, paving the way for more robust and capable small satellite deployments.

Abstract Background Bacillus subtilis is well known for promoting plant growth and reducing abiotic and biotic stresses. Mutant gene-defective models can be created to understand important traits associated with rhizosphere fitness. This study aimed to analyze the role of exopolymeric genes in modulating tomato rhizosphere microbiome assembly under a gradient of soil microbiome diversities using the B. subtilis wild-type strain UD1022 and its corresponding mutant strain UD1022eps−TasA, which is defective in exopolysaccharide (EPS) and TasA protein production. Results qPCR revealed that the B. subtilis UD1022eps−TasA− strain has a diminished capacity to colonize tomato roots in soils with diluted microbial diversity. The analysis of bacterial β-diversity revealed significant differences in bacterial and fungal community structures following inoculation with either the wild-type or mutant B. subtilis strains. The Verrucomicrobiota, Patescibacteria, and Nitrospirota phyla were more enriched with the wild-type strain inoculation than with the mutant inoculation. Co-occurrence analysis revealed that when the mutant was inoculated in tomato, the rhizosphere microbial community exhibited a lower level of modularity, fewer nodes, and fewer communities compared to communities inoculated with wild-type B. subtilis. Conclusion This study advances our understanding of the EPS and TasA genes, which are not only important for root colonization but also play a significant role in shaping rhizosphere microbiome assembly. Future research should concentrate on specific microbiome genetic traits and their implications for rhizosphere colonization, coupled with rhizosphere microbiome modulation. These efforts will be crucial for optimizing PGPR-based approaches in agriculture.

The Reinforced Concrete (RC) beams containing Expanded Polystyrene Beads (EPS) and Palm Oil Fuel Ash (POFA) as sand and cement replacement with a percentage between 10% and 30% were studied in terms of load-deflection behaviour. RC beam’s size was 1000×150×150 mm and simply supported at spaced 750 mm apart. The 10% of POFA without EPS shows a slight increase which is 0.26% higher than normal concrete in compressive strength. The ultimate load and flexural performance of RC beams with EPS and POFA exhibited a decreasing trend. All beams’ ultimate load exceeds the design value. The cracks of the RC beam may be classified as vertical flexural cracks, and some of the cracks can be classified as shear cracks based on the crack angle. As the percentage of EPS and POFA increases above 20% for all specimens, cracking starts to change to shear cracking.

Abstract Peritoneal membrane dysfunction in peritoneal dialysis (PD) is primarily attributed to angiogenesis; however, the integrity of vascular endothelial cells can affect peritoneal permeability. Hyaluronan, a component of the endothelial glycocalyx, is reportedly involved in preventing proteinuria in the normal glomerulus. One hypothesis suggests that development of encapsulating peritoneal sclerosis (EPS) is triggered by protein leakage due to vascular endothelial injury. We therefore investigated the effect of hyaluronan in the glycocalyx on peritoneal permeability and disease conditions. After hyaluronidase-mediated degradation of hyaluronan on the endothelial cells of mice, macromolecules, including albumin and β2 microglobulin, leaked into the dialysate. However, peritoneal transport of small solute molecules was not affected. Pathologically, hyaluronan expression was diminished; however, expression of vascular endothelial cadherin and heparan sulfate, a core protein of the glycocalyx, was preserved. Hyaluronan expression on endothelial cells was studied using 254 human peritoneal membrane samples. Hyaluronan expression decreased in patients undergoing long-term PD treatment and EPS patients treated with conventional solutions. Furthermore, the extent of hyaluronan loss correlated with the severity of vasculopathy. Hyaluronan on endothelial cells is involved in the peritoneal transport of macromolecules. Treatment strategies that preserve hyaluronan in the glycocalyx could prevent the leakage of macromolecules and subsequent related complications.

Background: Symptoms of dyspepsia are usually encountered by chronic kidney disease patients. Abdominal discomfort is commonly seen in CKD patients with no other causes of organic affection. Aim: to determine the prevalence of functional dyspepsia in CKD patients, and which subtype is predominant in them. Materials and patients: This observational study included 150 CKD patients. Clinical and laboratory data were recorded for every patient. All the patients were interviewed using the ROME IV questionnaire of functional dyspepsia. Patients fulfilling criteria for functional dyspepsia were exposed to upper GI endoscopy. Results: Overall, 73 (48.7%) of CKD patients were males and 77 (51.3%) were females with mean age of (45.71 ± 9.59) and mean BMI (26.58 ± 5.39). The frequency of functional dyspepsia among CKD patients was determined to be 14.7% (22 out of 150 patients). Among those affected by functional dyspepsia, the most prevalent subtype was found to be Epigastric Pain Syndrome (EPS), accounting for 59% (13 out of 22 cases). The most common predictor of FD in CKD patients was chronic HCV infection, hemodialysis, stage of CKD and eGFR as revealed by Univariate regression analysis. Conclusion: The prevalence of FD amongst CKD patients is 14.7% with EPS the predominant subtype. Male patients, HCV patients, patients with higher CKD stages and highly impaired eGFR (low eGFR) are more probable to have FD.

Background: Bacillus subtilis is well known for promoting plant growth and reducing abiotic and biotic stresses. Mutant gene-defective models can be created to understand important traits associated with rhizosphere fitness. This study aimed to analyze the role of exopolymeric genes in modulating tomato rhizosphere microbiome assembly under a gradient of soil microbiome diversities using the B. subtilis wild-type strain UD1022 and its corresponding mutant strain UD1022eps−TasA, which is defective in exopolysaccharide (EPS) and TasA protein production. Results: qPCR revealed that the B. subtilis UD1022eps−TasA− strain has a diminished capacity to colonize tomato roots in soils with diluted microbial diversity. The analysis of bacterial β-diversity revealed significant differences in bacterial and fungal community structures following inoculation with either the wild-type or mutant B. subtilis strains. The Verrucomicrobiota, Patescibacteria, and Nitrospirota phyla were more enriched with the wild-type strain inoculation than with the mutant inoculation. Co-occurrence analysis revealed that when the mutant was inoculated in tomato, the rhizosphere microbial community exhibited a lower level of modularity, fewer nodes, and fewer communities compared to communities inoculated with wild-type B. subtilis. Conclusion: This study advances our understanding of the EPS and TasA genes, which are not only important for root colonization but also play a significant role in shaping rhizosphere microbiome assembly. Future research should concentrate on specific microbiome genetic traits and their implications for rhizosphere colonization, coupled with rhizosphere microbiome modulation. These efforts will be crucial for optimizing PGPR-based approaches in agriculture. [ABSTRACT FROM AUTHOR]

Biofilm formation protects bacteria from antibiotic treatment and host immune responses, making biofilm infections difficult to treat. Within biofilms, bacterial cells are entangled in a self‐produced extracellular matrix that typically includes exopolysaccharides. Molecular‐level descriptions of biofilm matrix components, especially exopolysaccharides, have been challenging to attain due to their complex nature and lack of solubility and crystallinity. Solid‐state nuclear magnetic resonance (NMR) has emerged as a key tool to determine the structure of biofilm matrix exopolysaccharides without degradative sample preparation. In this review, we discuss challenges of studying biofilm matrix exopolysaccharides and opportunities to develop solid‐state NMR approaches to study these generally intractable materials. We specifically highlight investigations of the exopolysaccharide called Pel made by the opportunistic pathogen, Pseudomonas aeruginosa. We provide a roadmap for determining exopolysaccharide structure and discuss future opportunities to study such systems using solid‐state NMR. The strategies discussed for elucidating biofilm exopolysaccharide structure should be broadly applicable to studying the structures of other glycans. [ABSTRACT FROM AUTHOR]

Background and aims: The bicinchoninic acid (BCA) method was not yet applied on soil extracts of extracellular polymeric substances (EPS) to quantify polysaccharides, although this might be possible by introducing a cleavage step to produce monosaccharides. A pre-extraction with CaCl2 to remove interfering substances is usually performed before extracting EPS. The main objective of this study was to optimize the BCA assay for total carbohydrates quantification by applying a hydrolysis step to the EPS extracts, while also testing carbohydrate contents of CaCl2 pre-extracts. Methods: Total carbohydrates were quantified with BCA in EPS extracts of three soils, after hydrolysis with H2SO4, using two acid concentrations (0.75 and 1.0 M), three hydrolysis temperatures (100, 120 and 130 °C), and five hydrolysis times (10, 30, 50, 70, and 90 min). EPS were extracted with the cation exchange resin (CER) method adapted to soils. Two versions of pre-extraction with CaCl2 were tested twice consecutively. Results: More carbohydrates were measured after hydrolysis with 0.75 M H2SO4 at below 100 °C and after 10 min for all soils. Decreasing values were seen after longer reaction times and higher temperatures. CaCl2 extracted no or negligible amounts of carbohydrates from the soil. Conclusion: The pre-extraction step can be done without in most cases. The BCA assay is free of toxicity and easily performed, while also tolerant to interferences from most compounds in EPS extracts. These characteristics highlight the potential of this method for a rapid quantification of carbohydrates in studies of extractable polymers in several areas of soil biogeochemistry. [ABSTRACT FROM AUTHOR]

Skeletal muscle mediates the beneficial effects of exercise, thereby improving insulin sensitivity and reducing the risk for type 2 diabetes. Current human skeletal muscle models in vitro are incapable of fully recapitulating its physiological functions especially muscle contractility. By supplementation of insulin-like growth factor 1 (IGF1), a growth factor secreted by myofibers in vivo, we aimed to overcome these limitations. We monitored the differentiation process starting from primary human CD56-positive myoblasts in the presence/absence of IGF1 in serum-free medium in daily collected samples for 10 days. IGF1-supported differentiation formed thicker multinucleated myotubes showing physiological contraction upon electrical pulse stimulation (EPS) following day 6. Myotubes without IGF1 were almost incapable of contraction. IGF1 treatment shifted the proteome toward skeletal muscle-specific proteins that contribute to myofibril and sarcomere assembly, striated muscle contraction, and ATP production. Elevated PPARGC1A, MYH7, and reduced MYH1/2 suggest a more oxidative phenotype further demonstrated by higher abundance of proteins of the respiratory chain and elevated mitochondrial respiration. IGF1-treatment also upregulated glucose transporter (GLUT)4 and increased insulin-dependent glucose uptake compared with myotubes differentiated without IGF1. To conclude, addition of IGF1 to serum-free medium significantly improves the differentiation of human myotubes that showed enhanced myofibril formation, response to electrical pulse stimulation, oxidative respiratory capacity, and glucose metabolism overcoming limitations of previous standards. This novel protocol enables investigation of muscular exercise on a molecular level. NEW & NOTEWORTHY: Human skeletal muscle models are highly valuable to study how exercise prevents type 2 diabetes without invasive biopsies. Current models did not fully recapitulate the function of skeletal muscle especially during exercise. By supplementing insulin-like growth factor 1 (IGF1), the authors developed a functional human skeletal muscle model characterized by inducible contractility and increased oxidative and insulin-sensitive metabolism. The novel protocol overcomes the limitations of previous standards and enables investigation of exercise on a molecular level. [ABSTRACT FROM AUTHOR]

Bottom current activity has been responsible for the formation of a multitude of erosional and depositional features recorded in chalk. Advanced knowledge on the mobility and transport of unlithified calcareous nannofossil ooze by bottom currents is increasingly important not only for understanding the deposition of ancient chalk, but also for modelling the behaviour of modern pelagic carbonate sediments. Whereas the erosional behaviour of very pure calcareous nannofossil ooze has recently been investigated, the effect of organic matter and clay minerals on the erosional behaviour of calcareous nannofossil ooze is as yet unquantified. The results of the present study are based on laboratory flume studies utilizing chalk ooze with varying concentrations of smectite clay (1 to 30 wt.%), two types of organic matter and bed porosity. Phytoplankton (Pavlova lutheri) was used as a proxy for particulate marine organic matter, and xanthan gum as a proxy for extracellular polymeric substances. The results show a significant decrease in nannofossil ooze mobility with increasing content of clay or marine organic matter. Organic matter is found to reduce erodibility at much lower concentrations than clay minerals at porosities equivalent to those of the seafloor. At lower porosities, corresponding to some depth below the seafloor, organic matter and clay minerals are less effective in bed stabilization. This suggests that clay minerals and especially organic matter will affect the likelihood of initiation of severe erosion on the seafloor, whereas their inhibiting effect will decrease as erosion scours progressively deeper into the sediment column. The effect of extracellular polymeric substances is more complex than marine organic matter, probably due to detachment of large aggregates from the bed and resulting increase in bed roughness. The choice of organic matter in sedimentological experiments may lead to significant differences in sediment behaviour and should therefore involve careful consideration. [ABSTRACT FROM AUTHOR]

Hyperthermophilic bio-drying has stronger organic matter degradation and drying ability than the conventional bio-drying. However, ammonia emissions during the hyperthermophilic bio-drying are significantly higher than those during the conventional bio-drying process due to the higher temperature and pH value. Phosphate has been reported to reduce ammonia emissions during composting. Meanwhile, both the degradation of organic matter and the addition of phosphate buffer can promote the formation of EPS. EPS exhibits strong passivation and adsorption properties for heavy metals and organic pollutants, thus positively impacting the control of pollution in bio-drying products. Furthermore, the formation of EPS and the risk of the migration of heavy metals during hyperthermophilic bio-drying have not been reported. According to the results, compared to conventional bio-drying, the hyperthermophilic bio-drying significantly increased the yield of EPS and generated more active groups, reducing the migration risk of Cu, Zn, Cr, Pb, Cd, As, and Ni. The comprehensive potential ecological risk was reduced by 29.71%, which was higher than the reduction achieved by conventional bio-drying (13.81%). The addition of phosphate significantly reduced the ammonia emissions from the hyperthermophilic bio-drying and retained more nitrogen. Meanwhile, it promoted the formation of EPS and the enrichment of active groups, further reducing the migration risk of heavy metals. Moreover, the addition of phosphate buffer further reduced the comprehensive potential ecological risk of the products obtained from. [ABSTRACT FROM AUTHOR]