Search

Blends of block copolymers (BCPs) have great potential for applications in nanotechnology as the desired dimensions and complex nanopatterns can be designed upon mixing BCPs with other BCPs or homopolymers. Recently, we explored the synthesis of a series of discrete oligo(dimethylsiloxane) block co-oligomers (BCOs) and studied their phase behavior. Here, we disclose our results on blending oligomers of different lengths of discrete hydrazone end-functionalized oligo(dimethylsiloxanes) to study the effect of mixing on the morphological order. These mixtures possess a certain dispersity (Ð) as a result of the composition of the mixture. We have found that a distinct boundary exists between a good and poor morphological order at Ð ~ 1.10. As a result, the domain spacings of the low dispersity mixtures can be tuned by the molecular composition of the mixture, creating a wider spectrum of morphologies. Furthermore, we compare a hydrazone end-functionalized siloxane with a dispersity as a result of mixing with its analog having a similar dispersity but resulting from traditional polymerization. Finally, a discrete BCO was mixed with a disperse BCO of similar size and composition. The discrete BCO is immiscible in the disperse BCO which emphasizes the differences in interactions within disperse and discrete oligomers. These results demonstrate that the entropic and enthalpic contributions to nanoscale order in a system composed of discrete components are different compared to disperse BCPs and BCOs.

Polymer networks crosslinked via non-covalent interactions afford interesting materials for a wide range of applications due to their self-healing capability, recyclability, and tunable material properties. However, when strong non-covalent binding motifs in combination with high crosslink density are used, processing of the materials becomes troublesome because of high viscosities and the formation of insoluble gels. Here, we present an approach to control the processability of grafted polymers containing strong non-covalent interactions by balancing the interplay of intra- and intermolecular hydrogen bonding. A library of copolymers with different degrees of polymerization and content of protected ureido-pyrimidinone-urea (UPy-urea) grafts was prepared. Photo-deprotection in a good solvent like tetrahydrofuran (THF) at low concentrations (≤1 mg mL -1) created intramolecularly assembled nanoparticles. Remarkably, the intrinsic viscosity of these nanoparticle solutions was an order of magnitude lower compared to solutions of the intermolecularly assembled analogues, highlighting the crucial role of intra- versus intermolecular interactions. Due to the strong hydrogen bonds between UPy dimers, the intramolecularly assembled structures were kinetically trapped. As a result, the polymer nanoparticles were readily processed into a bulk material, without causing major changes in the morphology as verified by atomic force microscopy. Subsequent intermolecular crosslinking of the nanoparticle film, by heating to temperatures where the hydrogen-bond exchange becomes fast, resulted in a crosslinked network. The reversibility of the hereby obtained polymer networks was shown by retrieving the intramolecularly assembled nanoparticles via redissolution and sonication of the intermolecularly crosslinked film in THF with a small amount of acid. Our results highlight that the stability and processability of highly supramolecularly crosslinked polymers can be controlled both in solution and in bulk by using the interplay of intra- and intermolecular non-covalent interactions in grafted polymers.

The idea to synthesize and self-assemble nano-graphenes with structural precision into supramolecular polymers is just one of Klaus Müllen's many pioneering contributions to the chemical sciences. To honor his impact in the field of polymer science, we here describe a study that combines experimental and computational methods in studying the stability of kinetically trapped states of supramolecular polymers. We show that the introduction of stereocenters in the sidechains allow helical supramolecular polymers based on chiral triphenylene-2,6,10-tricarboxamide monomers to escape a kinetic trap more efficiently than polymers based on their achiral analogs. Partial depolymerization of the kinetically trapped state by increasing the temperature followed by polymerization by lowering the temperature shows that monomers either polymerize on existing stacks or self-nucleate to form the thermodynamically more stable state. Chiral monomers prefer the latter more than achiral monomers., Journal of Polymer Science, 60 (12), ISSN:2642-4169, ISSN:2642-4150

The assembly of donor–acceptor molecules via charge transfer (CT) interactions gives rise to highly ordered nanomaterials with appealing electronic properties. Here, we present the synthesis and bulk co-assembly of pyrene (Pyr) and naphthalenediimide (NDI) functionalized oligodimethylsiloxanes (oDMS) of discrete length. We tune the donor–acceptor interactions by connecting the pyrene and NDI to the same oligomer, forming a heterotelechelic block molecule (NDI-oDMSPyr), and to two separate oligomers, giving Pyr and NDI homotelechelic block molecules (Pyr-oDMS and NDI-oDMS). Liquid crystalline materials are obtained for binary mixtures of Pyr-oDMS and NDI-oDMS, while crystallization of the CT dimers occurred for the heterotelechelic NDI-oDMS-Pyr block molecule. The synergy between crystallization and phase-segregation coupled with the discrete length of the oDMS units allows for perfect order and sharp interfaces between the insulating siloxane and CT layers composed of crystalline CT dimers. We were able to tune the lamellar domain spacing and donor–acceptor CT interactions by applying pressures up to 6 GPa on the material, making the system promising for soft-material nanotechnologies. These results demonstrate the importance of the molecular design to tune the CT interactions and stability of a CT material., A robust, soft material held together by charge transfer interactions is developed. The nanostructure dimensions and material properties can be tuned by molecular design or pressure.

11 p.-7 fig.-1 tab.1 graph. abst., Dynamic binding events are key to arrive at functionality in nature, and these events are often governed by electrostatic or hydrophobic interactions. Synthetic supramolecular polymers are promising candidates to obtain biomaterials that mimic this dynamicity. Here, we created four new functional monomers based on the benzene-1,3,5-tricarboxamide (BTA) motif. Choline or atropine groups were introduced to obtain functional monomers capable of competing with the cell wall of Streptococcus pneumoniae for binding of essential choline-binding proteins (CBPs). Atropine-functionalized monomers BTA-Atr and BTA-Atr3 were too hydrophobic to form homogeneous assemblies, while choline-functionalized monomers BTA-Chol and BTA-Chol3 were unable to form fibers due to charge repulsion. However, copolymerization of BTA-Chol3 with non-functionalized BTA-(OH)3 yielded dynamic fibers, similar to BTA-(OH)3. These copolymers showed an increased affinity toward CBPs compared to free choline due to multivalent effects. BTA-based supramolecular copolymers are therefore a versatile platform to design bioactive and dynamic supramolecular polymers with novel biotechnological properties., The authors acknowledge the financial support from the Dutch Ministry of Education, Culture and Science (Gravity program 024.001.035), the ERC Advanced Grant (SYNMAT─788618), the Gravitation Program “Materials Driven Regeneration”, funded by the Netherlands Organization for Scientific Research (024.003.013), and the Agencia Estatal de Investigacion AEI/FEDER-EU-10.13039/501100011033- and Ministerio de Ciencia e Innovación, Spain (PID2019-105126RB-I00)

[Abstract] The use of supramolecular polymers to construct functional biomaterials is gaining more attention due to the tunable dynamic behavior and fibrous structures of supramolecular polymers, which resemble those found in natural systems, such as the extracellular matrix. Nevertheless, to obtain a biomaterial capable of mimicking native systems, complex biomolecules should be incorporated, as they allow one to achieve essential biological processes. In this study, supramolecular polymers based on water-soluble benzene-1,3,5-tricarboxamides (BTAs) were assembled in the presence of hyaluronic acid (HA) both in solution and hydrogel states. The coassembly of BTAs bearing tetra(ethylene glycol) at the periphery (BTA-OEG4) and HA at different ratios showed strong interactions between the two components that led to the formation of short fibers and heterogeneous hydrogels. BTAs were further covalently linked to HA (HA-BTA), resulting in a polymer that was unable to assemble into fibers or form hydrogels due to the high hydrophilicity of HA. However, coassembly of HA-BTA with BTA-OEG4 resulted in the formation of long fibers, similar to those formed by BTA-OEG4 alone, and hydrogels were produced with tunable stiffness ranging from 250 to 700 Pa, which is 10-fold higher than that of hydrogels assembled with only BTA-OEG4. Further coassembly of BTA-OEG4 fibers with other polysaccharides showed that except for dextran, all polysaccharides studied interacted with BTA-OEG4 fibers. The possibility of incorporating polysaccharides into BTA-based materials paves the way for the creation of dynamic complex biomaterials. The authors acknowledge the ICMS Animation Studio for providing the artwork. S.V.-A. and G.M. acknowledge the funding received by Gravitation Program “Materials Driven Regeneration,” funded by the Netherlands Organization for Scientific Research (024.003.013). J.M. acknowledges a Marie Skłodowska-Curie postdoctoral fellowship (794016) for financial support. G.M. acknowledges the funding received by the Swiss National Science Foundation (SNSF “Early PostDoc Mobility” P2EZP2-178435). R.C. acknowledges TA Instruments for providing the DHR-3 rheometer under the Young Distinguished Rheologist Award instrument grant. S.S. and E.W.M acknowledge the European Research Council (H2020-EU.1.1., SYNMAT project, ID 788618). Netherlands Organisation for Scientific Research; 024.003.013 Swiss National Science Foundation; P2EZP2-178435

Supramolecular copolymers formed by the noncovalent synthesis of multiple components expand the complexity of functional molecular systems. However, varying the composition and microstructure of copolymers through tuning the interactions between building blocks remains a challenge. Here, we report a remarkable discovery of the temperature-dependent supramolecular copolymerization of the two chiral monomers 4,4′,4″-(1,3,5-triazine-2,4,6-triyl)tribenzamide (S-T) and 4,4′,4″-(benzene-1,3,5-triyl)tribenzamide (S-B). We first demonstrate in the homopolymerization of the two individual monomers that a subtle change from the central triazine to benzene in the chemical structure of the monomers significantly affects the properties of the resulting homopolymers in solution. Homopolymers formed by S-T exhibit enhanced stability in comparison to S-B. More importantly, through a combination of spectroscopic analysis and theoretical simulation, we reveal the complex process of copolymerization: S-T aggregates into homopolymers at elevated temperature, and upon slow cooling S-B gradually intercalates into the copolymers, to finally give copolymers with almost 80% alternating bonds at 10 °C. The formation of the predominantly alternating copolymers is plausibly contributed by preferred heterointeractions between triazine and benzene cores in S-T and S-B, respectively, at lower temperatures. Overall, this work unravels the complexity of a supramolecular copolymerization process where an intermediate heterointeraction (higher than one homointeraction and lower than the other homointeraction) presents and proposes a general method to elucidate the microstructures of copolymers responsive to temperature changes.

In their thermotropic liquid-crystalline state, molecular semiconductors can show charge transport with high carrier mobility. Polymerization of the corresponding mesogens into a cross-linked network often deteriorates the charge transport. Here, we report that mesogens consisting of a terthiophene core and discrete oligodimethylsiloxane side-chains terminated by acrylate units can be photopolymerized in the columnar phase with retention of nanoscale order and charge transport capabilities. We argue that the strong tendency for microphase segregation protects the semiconducting block from reacting with free radicals during polymerization. This work provides new insights into the design of electroactive materials with charge transport properties.

The desire to construct complex molecular systems is driven by the need for technological (r)evolution and our intrinsic curiosity to comprehend the origin of life. Supramolecular chemists tackle this challenge by combining covalent and noncovalent reactions leading to multicomponent systems with emerging complexity. However, this synthetic strategy often coincides with difficult preparation protocols and a narrow window of suitable conditions. Here, we report on unsuspected observations of our group that highlight the impact of subtle “irregularities” on supramolecular systems. Based on the effects of pathway complexity, minute amounts of water in organic solvents or small impurities in the supramolecular building block, we discuss potential pitfalls in the study of complex systems. This article is intended to draw attention to often overlooked details and to initiate an open discussion on the importance of reporting experimental details to increase reproducibility in supramolecular chemistry.

Materials with highly ordered nanoscale structures can translate molecular processes to macroscopic function. Here we report on the photo-controlled organization of achiral alternating copolymers composed of discrete length blocks showing well-defined sub-10 nm morphologies. These alternating copolymers consist of main-chain azobenzene building blocks alternating with discrete oDMS blocks of various precise lengths. Remarkably, we demonstrate the imprinting of a stable helical molecular arrangement in spin-casted thin films by irradiation with circularly polarized light, without chiral dopant or plasticizer required. By following the out-of-equilibrium photo-switching process over irradiation time, the mechanism of molecular reorganization is unraveled and rationalized with the nature of the morphology. Linear photo-organization is preferentially reached with flexible and symmetric cylindrical structures while helical photo-organization is most easily obtained with robust but rotatable lamella structures. These findings suggest that precision in the synthesis and assembly of alternating copolymers can lead to complete control over molecular organization and main-chain motion.

Discrete dimethylsiloxane oligomers are interesting building blocks for the synthesis of high χ–low N block co-oligomers (BCOs) forming highly organized nanostructures. Here, a practical guide to the synthesis of molecularly defined oligodimethylsiloxanes (oDMS) from 7-mer to 40-mer via a linear growth strategy is described. The iteration of a hydroxylation reaction and the condensation of mono- or bifunctional hydroxysiloxanes with chloro-octamethyltetrasiloxane results in asymmetric and symmetric siloxanes, respectively. The synthesis contains critical washing and purification steps to remove minor amounts of low and high-molecular weight byproducts, which are detected using Fourier transform infrared spectrometry, gas chromatography–mass spectrometry, and size-exclusion chromatography. The oligomers are obtained on a multigram scale in yields of 94–50% and in high purity with only one molar mass detected. The formation of the chloride, hydroxide or hydride functional groups is adequately analyzed using 29Si NMR spectroscopy. The hydride terminated siloxane oligomers are used in Karstedt catalyzed hydrosilylation reactions with alkene-functional substrates to obtain oDMS-based oligomers and BCOs. Byproduct formation as a result of isomerization and reduction are followed by 1H NMR spectroscopy and minimized using dry conditions and low-catalyst loadings.

Stereochemical nomenclature remains a point of attention; especially now different fields in chemistry become more and more entwined. The ubiquitously used terminology “amplification of chirality” is fundamentally incorrect, as chirality cannot be amplified. Instead, we now recommend “amplification of asymmetry” as an alternative in the field of (supramolecular) polymer chemistry. Amplification of asymmetry refers to the increase of the magnitude of the asymmetry in the enantiomeric composition either at the molecular or the supramolecular level, and covers observations of nonproportional increase in optical activity in helical (supramolecular) polymers and in high enantiomeric excesses found when nonlinear effects are operative in asymmetric catalysis.

The correlation between molecular structure and mechanism of supramolecular polymerizations is a topic of great interest, with a special focus on the pathway complexity of porphyrin assemblies. Their cooperative polymerization typically yields highly ordered, long 1D polymers and is driven by a combination of π‐stacking due to solvophobic effects and hydrogen bonding interactions. Subtle changes in molecular structure, however, have significant influence on the cooperativity factor and yield different aggregate types (J‐ versus H‐aggregates) of different lengths. In this study, the influence of amide connectivity on the self‐assembly behavior of porphyrin‐based supramolecular monomers was investigated. While in nonpolar solvents, C=O centered monomers readily assemble into helical supramolecular polymers via a cooperative mechanism, their NH centered counterparts form short, non‐helical J‐type aggregates via an isodesmic pathway. A combination of spectroscopy and density functional theory modelling sheds light on the molecular origins causing this stunning difference in assembly properties and demonstrates the importance of molecular connectivity in the design of supramolecular systems. Finally, their mutual interference in copolymerization experiments is presented., Amide connectivity in the molecular design of porphyrin supramolecular monomers strongly impacts the assembly behavior in nonpolar solvents. While C=O centered monomers aggregate cooperatively into long, 1D supramolecular fibers, their NH‐centered counterparts only form isodesmic J‐aggregates. With a combination of spectroscopy and density functional modelling, the authors shed light on the molecular origins of these differences in properties.

De introductie van een chemisch additief aan supramoleculaire polymeren heeft een groot potentieel voor de ontwikkeling van nieuwe structuren en functies. In dit opzicht zijn verschillende op donor- en acceptor gebaseerde moleculen toegepast bij het ontwerp van deze niet-covalente polymeren. De opname van door borium en stikstof gefrustreerde Lewis-paren in dergelijke architecturen is echter nog steeds zeldzaam, ondanks hun vele intrigerende eigenschappen in katalyse en materiaalwetenschap. De beperkte keuzes van geschikte boorderivaten vormen een van de belangrijkste beperkingen voor de vooruitgang in deze richting. Hier onderzoeken we het gebruik van het in de handel verkrijgbare tris (pentafluorfenyl) boraan met verschillende trifenylaminederivaten om supramoleculaire B-N-ladingsoverdrachtsystemen te creëren. Onze resultaten benadrukken het belang van een goede balans tussen de donor-/acceptorsterkte en de drijvende kracht voor supramoleculaire polymerisatie om stabiele B-N-systemen op lange afstand te bereiken. Gedetailleerde analyses met behulp van paramagnetische elektronenresonantie en optische spectroscopie suggereren dat tris(pentafluorfenyl)boraan complex gedrag vertoont met de op amide gebaseerde trifenylamine supramoleculaire polymeren en kan interageren in dimeren of grotere chirale aggregaten, afhankelijk van de specifieke structuur van de trifenylaminen.

The combination of covalent and non-covalent synthesis is omnipresent in nature and potentially enables access to new materials. Yet, the fundamental principles that govern such a synthesis are barely understood. Here, we demonstrate how even simple reaction mixtures behave surprisingly complex when covalent reactions are coupled to self-assembly processes. Specifically, we study the reaction behavior of a system in which the in situ formation of discotic benzene-1,3,5-tricarboxamide (BTA) monomers is linked to an intertwined non-covalent reaction network including self-assembly into helical BTA polymers. This system shows an unexpected phase-separation behavior in which an interplay of reactant/product concentrations, side-products and solvent purity determines the system composition. We envision that these insights can bring us one step closer to how to design the synthesis of systems in a combined covalent/non-covalent fashion.

Control over molecular motion is facilitated in materials with highly ordered nanoscale structures. Here we report on the fabrication of cholesteric liquid-crystal networks by circularly polarized light irradiation, without the need for chiral dopant or plasticizer. The polymer network is obtained by photopolymerization of a smectic achiral diacrylate mesogen consisting of an azobenzene core and discrete oligodimethylsiloxane tails. The synchronous helical photoalignment and photopolymerization originate from the cooperative movement of the mesogens ordered in well-defined responsive structures, together with the flexibility of the oligodimethylsiloxane blocks. The resulting thin films show excellent thermal stability and light-induced memory features with reversible responses. Additionally, we demonstrate the fabrication of photo-patterned films of liquid-crystal networks with opposite helical senses. These findings provide a new method to make light-controllable chiroptical materials with exciting applications in optics and photonics.

Discrete block co-oligomers (BCOs) assemble into highly ordered nanostructures, which adopt a variety of morphologies depending on their environment. Here, we present a series of discrete oligodimethylsiloxane-oligoproline (oDMS-oPro) BCOs with varying oligomer lengths and proline end-groups, and study the nanostructures formed in both bulk and solution. The conjugation of oligoprolines to apolar siloxanes permits a study of the aggregation behavior of oligoproline moieties in a variety of solvents, including a highly apolar solvent like methylcyclohexane. The apolar solvent is more reminiscent of the polarity of the siloxane bulk, which gives insights into the supramolecular interactions that govern both bulk and solution assembly processes of the oligoproline. This extensive structural characterization allows the bridging of the gap between solution and bulk assembly. The interplay between the aggregation of the oligoproline block and the phase segregation induced by the siloxane drives the assembly. This gives rise to disordered, micellar microstructures in apolar solution and crystallization-driven lamellar nanostructures in the bulk. While most di- and triblock co-oligomers adopt predictable morphological features, one of them, oDMS15-oPro6-NH2, exhibits pathway complexity leading to gel formation. The pathway selection in the complex interplay between aggregation and phase segregation gives rise to interesting material properties., Journal of the American Chemical Society, 143 (10), ISSN:0002-7863, ISSN:1520-5126

In the flourishing field of soft robotics, strategies to embody communication and collective motion are scarce. Here we report the synchronized oscillations of thin plastic actuators by an approach reminiscent of the synchronized motion of pendula and metronomes. Two liquid crystalline network oscillators fuelled by light influence the movement of one another and display synchronized oscillations in-phase and anti-phase in a steady state. By observing entrainment between the asymmetric oscillators we demonstrate the existence of coupling between the two actuators. We qualitatively explain the origin of the synchronized motion using a theoretical model and numerical simulations, which suggest that the motion can be tuned by the mechanical properties of the coupling joint. We thus anticipate that the complex synchronization phenomena usually observed in rigid systems can also exist in soft polymeric materials. This enables the use of new stimuli, featuring an example of collective motion by photo-actuation.

Precise oligomeric materials constitute a growing area of research with implications for various applications as well as fundamental studies. Notably, this field of science which can be termed macro-organic chemistry, draws inspiration from both traditional polymer chemistry and organic synthesis, combining the molecular precision of organic chemistry with the materials properties of macromolecules. Discrete oligomers enable access to unprecedented materials properties, for example, in self-assembled structures, crystallization, or optical properties. The degree of control over oligomer structures resembles many biological systems and enables the design of materials with tailored properties and the development of fundamental structure–property relationships. This Review highlights recent developments in macro-organic chemistry from synthetic concepts to materials properties, with a focus on self-assembly and molecular recognition. Finally, an outlook for future research directions is provided.

The development of new strategies for the preparation of multicomponent supramolecular assemblies is a major challenge on the road to complex functional molecular systems. Here we present the use of a non‐porous self‐assembled monolayer from uC33‐NDI‐uC33, a naphthalenediimide symmetrically functionalized with unsaturated 33 carbon‐atom‐chains, to prepare bicomponent supramolecular surface systems with a series of alkoxy‐pyrene (PyrOR) derivatives at the liquid/HOPG interface. While previous attempts at directly depositing many of these PyrOR units at the liquid/HOPG interface failed, the multicomponent approach through the uC33‐NDI‐uC33 template enabled control over molecular interactions and facilitated adsorption. The PyrOR deposition restructured the initial uC33‐NDI‐uC33 monolayer, causing an expansion in two dimensions to accommodate the guests. As far as we know, this represents the first example of a non‐porous or non‐metal complex‐bearing monolayer that allows the stepwise formation of multicomponent supramolecular architectures on surfaces., Supramolecular surface systems: A non‐porous monolayer of a long‐carbon chain naphthalenediimide serves as template for the stepwise adsorption of a series of alkoxy‐pyrene derivatives at the liquid/HOPG interface. Depositing the guests onto the template causes a severe reorganization of the initial monolayer, as visualized by scanning tunneling microscopy.

Supramolecular copolymerizations offer attractive options to introduce structural and functional diversity in supramolecular polymer materials. Yet, general principles and structure-property relationships for rational comonomer design remain lacking. Here, we report on the supramolecular (co)aggregation of a phenylpyridine and bipyridine derivative of a recently reported biphenyl tetracarboxamide-based monomer. We show that both arylpyridines are poor monomers for supramolecular homopolymerizations. However, the two arylpyridines efficiently influence supramolecular polymers of a biphenyl-based polymer. The phenylpyridine derivatives primarily sequestrate biphenyl monomers, while the bipyridine intercalates into the polymers at high temperatures. Thereby, these two poorly homopolymerizing monomers allow for a fine control over the length of the biphenyl-based supramolecular polymers. As such, our results highlight the potential to control the structure and morphology of supramolecular polymers by tailoring the electronic properties of additives., Chemical Science, 12 (39), ISSN:2041-6520, ISSN:2041-6539

Controlling the reciprocity between chemical reactivity and supramolecular structure is a topic of great interest in the emergence of molecular complexity. In this work, we investigate the effect of a covalent reaction as a trigger to depolymerize a supramolecular assembly. We focus on the impact of an in situ thiol–ene reaction on the (co)polymerization of three derivatives of benzene-1,3,5-tricarboxamide (BTA) monomers functionalized with cysteine, hexylcysteine, and alkyl side chains: Cys-BTA, HexCys-BTA, and a-BTA. Long supramolecular polymers of Cys-BTA can be depolymerized into short dimeric aggregates of HexCys-BTAvia the in situ thiol–ene reaction. Analysis of the system by time-resolved spectroscopy and light scattering unravels the fast dynamicity of the structures and the mechanism of depolymerization. Moreover, by intercalating the reactive Cys-BTA monomer into an unreactive inert polymer, the in situ thiol–ene reaction transforms the intercalator into a sequestrator and induces the depolymerization of the unreactive polymer. This work shows that the implementation of reactivity into supramolecular assemblies enables temporal control of depolymerization processes, which can bring us one step closer to understanding the interplay between non-covalent and covalent chemistry., We report on the controlled depolymerization of supramolecular 1D polymers into well-defined dimers triggered by a covalent reaction on the side chains of the monomer.

By enchaining a small fraction of chiral monomer units, the helical sense of a dynamic polymer constructed from achiral monomer units can be disproportionately biased. This phenomenon, known as the sergeants-and-soldiers (S&S) effect, has been found to be widely applicable to dynamic covalent and supramolecular polymers. However, it has not been exemplified with a supramolecular polymer that features multiple helical states. Herein, we demonstrate the S&S effect in the context of the temperature-controlled supramolecular copolymerization of chiral and achiral biphenyl tetracarboxamides in alkanes. The one-dimensional helical structures presented in this study are unique because they exhibit three distinct helical states, two of which are triggered by coassembling with monomeric water that is codissolved in the solvent. The self-assembly pathways are rationalized using a combination of mathematical fitting and simulations with a thermodynamic mass-balance model. We observe an unprecedented case of an "abnormal" S&S effect by changing the side chains of the achiral soldier. Although the molecular structure of these aggregates remains elusive, the coassembly of water is found to have a profound impact on the helical excess.

Supramolecular block copolymers composed of discrete blocks have promising properties for nanotechnology resulting from their ability to combine well-defined morphologies with good bulk material properties. Here, we present the impact of a well-defined siloxane block in either the main-chain or present as pendant grafts on the properties of supramolecular block copolymers that form ordered nanostructures with sub-5 nm domains. For this, two types of supramolecular block copolymers were synthesized based on the ureidopyrimidinone-urethane (UPy-UT) motif. In the first, oligodimethylsiloxanes (oDMS) of discrete length were end-capped with the UPy-UT motif, affording main-chain UPy-UT-Sin. In the second, the UPy-UT motif was grafted with discrete oDMS affording grafted UPy-UT-g-Si7. For the two systems, the compositions are similar; only the molecular architecture differs. In both cases, crystallization of the UPy-UT block is in synergy with phase segregation of the oDMS, resulting in the formation of lamellar morphologies. The grafted UPy-UT-g-Si7 can form long-range ordered lamellae, resulting in the formation of micrometer-sized 2D sheets of supramolecular polymers which show brittle properties. In contrast, UPy-UT-Sin forms a ductile material. As the compositions of both BCOs are similar, the differences in morphology and mechanical properties are a direct consequence of the molecular architecture. These results showcase how molecular design of the building block capable of forming block copolymers translates into controlled nanostructures and material properties as a result of the supramolecular nature of the interactions.

Squaraine dyes are well known for their strong absorption in the visible regime. Reports on chiral squaraine dyes are, however, scarce. To address this gap, we here report two novel chiral squaraine dyes and their achiral counterparts. The presented dyes are aggregated in solution and in thin films. A detailed chiroptical study shows that thin films formed by co‐assembling the chiral dye with its achiral counterpart exhibit exceptional photophysical properties. The circular dichroism (CD) of the co‐assembled structures reaches a maximum when just 25 % of the chiral dye are present in the mixture. The solid structures with the highest relative CD effect are achieved when the chiral dye is used solely as a director, rather than the structural component. The chiroptical data are further supported by selected spin‐filtering measurements using mc‐AFM. These findings provide a promising platform for investigating the relationship between the dissymmetry of a supramolecular structure and emerging material properties rather than a comparison between a chiral molecular structure and an achiral counterpart., Helicity control: An unexpected outcome of the co‐assembly of achiral squaraine dye a‐SQ‐1 with its chiral counterpart S ‐SQ‐1 is reported. A maximum in optical activity is observed in the supramolecular aggregates of a 3:1 mixture with a‐SQ‐1 as the major component. Intriguingly, the highest spin‐selective electron transport is observed for this mixing ratio as well, illustrating the direct relationship between optical activity and spin‐selective electron transport.

The introduction of stereogenic centers in supramolecular building blocks is used to unveil subtle changes in supramolecular structure and dynamics over time. Three stereogenic centers based on deuterium atoms were introduced in the side chains of a benzene-1,3,5-tricarboxamide (BTA) resulting in a supramolecular polymer in water that at first glance has a structure and dynamics identical to its achiral counterpart. Using three different techniques, the properties of the double helical polymers are compared after 1 day and 4 weeks. An increase in helical preference is observed over time as well as a decrease in the helical pitch and monomer exchange dynamics. It is proposed that the polymer of the chiral monomer needs time to arrive at its maximal preference in helical bias. These results indicate that the order and tight packing increase over time, while the dynamics of this supramolecular polymer decrease over time, an effect that is typically overlooked but unveiled by the isotopic chirality.

Understanding cell/material interactions is essential to design functional cell‐responsive materials. While the scientific literature abounds with formulations of biomimetic materials, only a fraction of them focused on mechanisms of the molecular interactions between cells and material. To provide new knowledge on the strategies for materials/cell recognition and binding, supramolecular benzene‐1,3,5‐tricarboxamide copolymers bearing benzoxaborole moieties are anchored on the surface of human erythrocytes via benzoxaborole/sialic‐acid binding. This interaction based on both dynamic covalent and non‐covalent chemistries is visualized in real time by means of total internal reflection fluorescence microscopy. Exploiting this imaging method, we observe that the functional copolymers specifically interact with the cell surface. An optimal fiber affinity towards the cells as a function of benzoxaborole concentration demonstrates the crucial role of multivalency in these cell/material interactions., Drawn to the blood: When benzene‐1,3,5‐tricarboxamide 1D fibers are decorated with benzoxaborole moieties, a dynamic interaction with human red blood cells is induced via the adaptive covalent reaction between boronic acids and cell sialic acids. Total internal reflection fluorescence microscopy is exploited as a powerful tool to allow real‐time imaging of cells/fiber binding, revealing the multivalency of this interaction.

We report two families of naphthalenediimides (NDIs) symmetrically functionalized with discrete carbon chains comprising up to 55 carbon atoms (Cn-NDI-Cn, n = 39, 44, 50, and 55) and their self-assembly at the 1-phenyloctane/highly oriented pyrolytic graphite interface (1-PO/HOPG interface). The compounds differ by the presence or absence of two or three internal double bonds in the carbon chains (unsaturated and saturated Cn-NDI-Cn, respectively). Combinatorial distributions of geometrical isomers displaying either the E- or Z-configuration at each double bond are obtained for the unsaturated compounds. Analysis of the self-assembled monolayers of equally long unsaturated and saturated Cn-NDI-Cn by scanning tunneling microscopy (STM) reveal that all Cn-NDI-Cn tend to form lamellar systems featuring alternating areas of aromatic cores and carbon chains. Extended chain lengths are found to significantly increase disorder in the self-assembled monolayers due to misalignments and enhanced strength of interchain interactions. This phenomenon is antagonized by the local order-inducing effect of the internal double bonds: unsaturated Cn-NDI-Cn give qualitatively more ordered self-assembled monolayers compared to their saturated counterparts. The use of combinatorial distributions of unsaturated Cn-NDI-Cn geometrical isomers does not represent a limitation to achieve local order in the self-assembled monolayers. The self-assembly process operates a combinatorial search and selects the geometrical isomer(s) affording the most thermodynamically stable pattern, highlighting the adaptive character of the system. Finally, the antagonistic interplay between the extended carbon chain lengths and the presence of internal double bonds brings to the discovery of the lamellar "phase C" morphology for unsaturated Cn-NDI-Cn with n ≥ 50.

Connecting molecular-level phenomena to larger scales and, ultimately, to sophisticated molecular systems that resemble living systems remains a considerable challenge in supramolecular chemistry. To this end, molecular self-assembly at higher hierarchical levels has to be understood and controlled. Here, we report unusual self-assembled structures formed from a simple porphyrin derivative. Unexpectedly, this formed a one-dimensional (1D) supramolecular polymer that coiled to give an Archimedean spiral. Our analysis of the supramolecular polymerization by using mass-balance models suggested that the Archimedean spiral is formed at high concentrations of the monomer, whereas other aggregation types might form at low concentrations. Gratifyingly, we discovered that our porphyrin-based monomer formed supramolecular concentric toroids at low concentrations. Moreover, a mechanistic insight into the self-assembly process permitted a controlled synthesis of these concentric toroids. This study both illustrates the richness of self-assembled structures at higher levels of hierarchy and demonstrates a topological effect in noncovalent synthesis., Connecting molecular-level phenomena to larger scales and molecular systems that resemble living systems remains a considerable challenge in supramolecular chemistry. Here, the authors report different self-assembly patterns in a porphyrin structure which can form – depending on the concentration - spirals or toroids.

Supramolecular systems are intrinsically dynamic and sensitive to changes in molecular structure and external conditions. Because of these unique properties, strategies to control polymer length, composition, comonomer sequence, and morphology have to be developed for sufficient control over supramolecular copolymerizations. We designed photoresponsive, mono acyl hydrazone functionalized benzene-1,3,5-tricarboxamide (m-BTA) monomers that play a dual role in the coassembly with achiral alkyl BTAs (a-BTA). In the E isomer form, the chiral m-BTA monomers intercalate into stacks of a-BTA and dictate the chirality of the helices. Photoisomerization to the Z isomer transforms the intercalator into a chain capper, allowing dynamic shortening of chain length in the supramolecular aggregates. We combine optical spectroscopy and light-scattering experiments with theoretical modeling to show the reversible decrease in length when switching from the E to Z isomer of m-BTA in the copolymer with inert a-BTA. With a mass-balance thermodynamic model, we gain additional insights into the composition of copolymers and length distributions of the species over a broad range of concentrations and mixing ratios of a-BTA/m-BTA. Moreover, the model was used to predict the impact of an additive (chain capper and intercalator) on the chain length over a range of concentrations, showing a remarkable amplification of efficiency at high concentrations. By employing a stimuli-responsive comonomer in a mostly inert polymer, we can cooperatively amplify the effect of the switching and obtain photocontrol of polymer length. Moreover, this dynamic decrease in chain length causes a macroscopic gel-to-sol phase transformation of the copolymer gel, although 99.4% of the organogel is inert to the light stimulus.

In polymer chemistry, modulation of sequence and control over chain length are routinely applied to alter and fine-tune the properties of covalent (co)polymers. For supramolecular polymers, the same principles underlying this control have not been fully elucidated up to this date. Particularly, rational control over molecular weight in dynamic supramolecular polymers is not trivial, especially when a cooperative mechanism is operative. We start this review by summarizing how molecular-weight control has been achieved in seminal examples in the field of supramolecular polymerizations. Following this, we propose to classify the avenues taken to control molecular weights in supramolecular polymerizations. We focus on dynamic cooperative supramolecular polymerization as this is the most challenging in terms of molecular weight control. We use a mass-balance equilibrium model to predict how the nature of the interaction of an additive B with the monomers and supramolecular polymers of component A affects the degree of aggregation and the degree of polymerization. We put forward a classification system that distinguishes between B acting as a chain capper, a sequestrator, a comonomer, or an intercalator. We also highlight the experimental methods applied to probe supramolecular polymerization processes, the type of information they provide in relation to molecular weight and degree of aggregation, and how this can be used to classify the role of B. The guidelines and classification delineated in this review to assess and control molecular weights in supramolecular polymers can serve to reevaluate exciting systems present in current literature and contribute to broaden the understanding of multicomponent systems.

Achieving long-range order with surface-supported supramolecular assemblies is one of the pressing challenges in the prospering field of non-covalent surface functionalization. Having access to defect-free on-surface molecular assemblies will pave the way for various nanotechnology applications. Here we report the synthesis of two libraries of naphthalenediimides (NDIs) symmetrically functionalized with long aliphatic chains (C28 and C33) and their self-assembly at the 1-phenyloctane/highly oriented pyrolytic graphite (1-PO/HOPG) interface. The two NDI libraries differ by the presence/absence of an internal double bond in each aliphatic chain (unsaturated and saturated compounds, respectively). All molecules assemble into lamellar arrangements, with the NDI cores lying flat and forming 1D rows on the surface, while the carbon chains separate the 1D rows from each other. Importantly, the presence of the unsaturation plays a dominant role in the arrangement of the aliphatic chains, as it exclusively favors interdigitation. The fully saturated tails, instead, self-assemble into a combination of either interdigitated or non-interdigitated diagonal arrangements. This difference in packing is spectacularly amplified at the whole surface level and results in almost defect-free self-assembled monolayers for the unsaturated compounds. In contrast, the monolayers of the saturated counterparts are globally disordered, even though they locally preserve the lamellar arrangements. The experimental observations are supported by computational studies and are rationalized in terms of stronger van der Waals interactions in the case of the unsaturated compounds. Our investigation reveals the paramount role played by internal double bonds on the self-assembly of discrete large molecules at the liquid/solid interface.

Access to versatile and stable nanostructures formed by the self-assembly of block copolymers in water is essential for biomedical applications. These applications require control over the stability, morphology, and size of the formed nanostructures. Here, we study the self-assembly in water of a library of fully discrete and sequence-controlled AB-type block co-oligomers (BCOs) of oligo(l-lactic acid)-b-oligo(ethylene glycol). In this series, we eliminate all the inherent uncertainty associated with molar mass, ratio, and compositional dispersity, but vary the ratio between the water-soluble and water-insoluble parts. The BCO library is designed in such a way that vesicles, spherical micelles, and cylindrical micelles are generated in solution, hereby covering a variety of common morphologies. With the help of self-consistent field (SCF) computations, the thermodynamic structures in water are predicted for all structures. The morphologies formed were experimentally analyzed using a combination of calorimetry and scattering techniques. When comparing the experimentally found structures with those predicted, we find an excellent agreement. Intriguingly, calorimetry showed the presence of crystallized l-lactic acid (LLA) units in the bilayer of the lamellar forming BCO. Despite this crystallinity, there is no mismatch between the predicted and observed bilayer thicknesses upon self-assembly in water. In this case, phase separation driven by the hydrophobic LLA block coincides with crystallization, resulting in stable morphologies. Thus, SCF guided library design and sample preparation can lead toward robust formulations of nanoparticles.

Since the first polymers were discovered, scientists have debated their structures. Before Hermann Staudinger published the brilliant concept of macromolecules, polymer properties were generally believed to be based on the colloidal aggregation of small particles or molecules. From 1920 onwards, polymers and macromolecules are synonymous with each other; i. e. materials made by many covalent bonds connecting monomers in 2 or 3 dimensions. Although supramolecular interactions between macromolecular chains are evidently important, e. g. in nylons, it was unheard of to proposing polymeric materials based on the interaction of small molecules. Breakthroughs in supramolecular chemistry, however, showed that polymer materials can be made by small molecules using strong directional secondary interactions; the field of supramolecular polymers emerged. In a way, we have come full circle. In this essay we give a personal story about the birth of supramolecular polymers, with special emphasis on their structures, way of formation, and the dynamic nature of their bonding. The adaptivity of supramolecular polymers has become a major asset for novel applications, e. g. in the direction for the sustainable use of polymers, but also in biomedicine and electronics as well as self-healing materials. The lessons learned in the past years include aspects that forecast a bright future for the use of supramolecular interactions in polymer materials in general and for supramolecular polymers in particular. In order to give full tribute to Staudinger in the year celebrating 100 years of macromolecules, we will show that many of the concepts of macromolecular polymers apply to supramolecular polymers, with only one important difference with fascinating consequences: the dynamic nature of the bonds that form polymer chains.

In contrast to biomacromolecules, synthetic polymers generally lack a defined monomer sequence, therefore one of the challenges of polymer chemists these days is gaining more control over the primary structure of synthetic polymers and oligomers. In this work, stereocontrolled sequence-defined oligomers were synthesised using a thiolactone-based platform. Step-wise elongation of the oligomer occurs via ring-opening of the thiolactone, resulting in the formation of stereocenters along the backbone. These initial studies indicate remarkable differences in the strength of non-covalent interactions in isotactic and atactic oligomers. Different side-chain moieties were introduced using alkyl halide building blocks and the synthetic protocol was succesfully optimised and automated. Furthermore, the possible post-synthesis modification of the oligomers was demonstrated using 'click' chemistry.

Non-covalently crosslinked polymeric networks are promising materials towards sustainable and recyclable plastics. Here, we present the post-functionalization of poly(dimethyl siloxane) (PDMS) with supramolecular moieties, attached as grafts to the PDMS backbone, to obtain recyclable PDMS networks. We select three different supramolecular motifs that differ in interaction strength and investigate how these differences affect the dynamic behavior of the networks. The introduction of dinitrohydrazones (hydz), which afford weak supramolecular interactions by π-stacking, resulted in a viscous material at room temperature. Stronger self-association was achieved by the introduction of benzene-1,3,5-carboxamides (BTAs) and ureidopyrimidinones (UPys), which self-assemble via triple and quadruple hydrogen bonding, respectively. This resulted in a thermoplastic elastomeric material for BTA-based PDMS and brittle materials for Upy-based PDMS. Time- and temperature-dependent mechanical measurements reveal that the dynamic nature of the supramolecular bonds becomes slower upon increasing the interaction strength. The polymers are fully recyclable by solvation or compression molding without the loss of material properties. Thereby, by using one linear PDMS backbone, we demonstrate how fundamentally different material properties are obtained by changing the supramolecular interaction strength and type of non-covalent crosslinks. These molecular insights broaden the scope and application of PDMS-based sustainable materials.