Search

Plasma accelerators sustain extreme field gradients and potentially enable future compact linear colliders. Although tremendous progress has been achieved in accelerating electron beams in a plasma accelerator, positron acceleration with collider-relevant parameters is challenging. A recently proposed positron acceleration scheme relying on the wake generated by an electron drive beam in a plasma column has been shown to be able to accelerate positron witness beams with low emittance and low energy spread. However, since this scheme relies on cylindrical symmetry, it is possibly prone to transverse instabilities that could lead, ultimately, to beam breakup. In this article, we show that the witness beam itself is subject to various damping mechanisms and, therefore, this positron acceleration scheme is inherently stable toward the misalignment of the drive and witness beams. This enables stable, high-quality plasma-based positron acceleration.

Laser-plasma accelerators (LPAs) now routinely produce electron beams with GeV energies over acceleration lengths on the order of a few centimeters. This capability and the demonstration of multistage coupling make LPAs promising for numerous applications. However, beam quality preservation in multistage accelerators remains an obstacle because of the need to separate the laser pulse from the electron beam. Plasma mirrors can be used to redirect the laser pulse, but their substrate thickness threatens to substantially degrade the electron beam emittance. Ultrathin (∼20 nm) liquid crystal (LC) plasma mirrors are an excellent candidate to address this challenge. This work investigates the robustness of thin LC plasma mirrors in the presence of capillary discharge plasma and an auxiliary heater laser. We find they can be operated ∼10 cm from the capillary exit when a heater laser is used. We then performed a normalized emittance measurement enabled using a 20 nm LC plasma mirror to protect electron beam optics after the LPA. The emittance contribution from scattering through the plasma mirror is calculated to be of order 100 nm, much less than the measured emittance of 4.0 μm. Finally, we develop a model to calculate plasma mirror performance based on the laser polarization and intensity, and plasma mirror thickness.

We describe the development and operation of a regenerative, cryogenically-formed discharge waveguide formed by freezing nitrous oxide gas onto the inner wall of a sapphire capillary. We demonstrate a technique for varying the channel diameter in situ and present guiding of low-power laser pulses through 6-cm long waveguides with channel diameters of 0.7, 0.8, and 1 mm. Measurements and simulations of the output laser fluence showed that the matched spot size could be adjusted with the thickness of the solid nitrous oxide layer.

Acceleration of positron beams in plasma-based accelerators is a highly challenging task. To realize a plasma-based linear collider, acceleration of a positron bunch with high-efficiency is required, while maintaining both a low emittance and a subpercent-level energy spread. Recently, a plasma-based positron acceleration scheme was proposed in which a wake suitable for the acceleration and transport of positrons is produced in a plasma column by means of an electron drive beam [Diederichs et al., Phys. Rev. Accel. Beams 22, 081301 (2019)PRABCJ2469-988810.1103/PhysRevAccelBeams.22.081301]. In this article, we present a study of beam loading for a positron beam in this type of wake. We demonstrate via particle-in-cell simulations that acceleration of high-quality positron beams is possible, and we discuss a possible path to achieve collider-relevant parameters.

We present a study of laser-ion acceleration, where an increased laser spot size leads to sheath field geometries that accelerate ion beams of narrow and achromatic divergence at unprecedented charge densities, resulting from the high aspect ratio of the laser spot size to the acceleration distance. Matching the laser pulse length to the transverse laser spot size mitigated laser sweeping across the target front side and optimized the acceleration, with maximum energies deviating significantly from a linear intensity scaling.

A finite radius plasma is proposed to generate wakefields that can focus and accelerate positron beams in a plasma wakefield accelerator. The finite radius plasma reduces the restoring force acting on the plasma electrons forming the plasma wakefield, resulting in an elongation of the on-axis return point of the electrons and, hence, creating a long, high-density electron filament. This results in a region with accelerating and focusing fields for positrons, allowing for the acceleration and quality-preserving transport of high-charge positron beams.

In a plasma-accelerator-based linear collider, the density of matched, low-emittance, high-energy particle bunches required for collider applications can be orders of magnitude above the background ion density, leading to ion motion, perturbation of the focusing fields, and, hence, to beam emittance growth. By analyzing the response of the background ions to an ultrahigh density beam, analytical expressions, valid for nonrelativistic ion motion, are derived for the transverse wakefield and for the final (i.e., after saturation) bunch emittance. Analytical results are validated against numerical modeling. Initial beam distributions are derived that are equilibrium solutions, which require head-to-tail bunch shaping, enabling emittance preservation with ion motion.

Control of the properties of laser-plasma-accelerated electron beams that were injected along a shock-induced density downramp through precision tailoring of the density profile was demonstrated using a 1.8 J, 45 fs laser interacting with a mm-scale gas jet. The effects on the beam spatial profile, steering, and absolute energy spread of the density region before the shock and tilt of the shock were investigated experimentally and with particle-in-cell simulations. By adjusting these density parameters, the electron beam quality was controlled and improved while the energy (30–180 MeV) and energy spread (2–11 MeV) were independently tuned. Simple models that are in good agreement with the experimental results are proposed to explain these relationships, advancing the understanding of downramp injection. This technique allows for high-quality electron beams with percent-level energy spread to be tailored based on the application.

Active plasma lenses have attracted interest in novel accelerator applications due to their ability to provide large-field-gradient (short focal length), tunable, and radially symmetric focusing for charged particle beams. However, if the discharge current is not flowing uniformly as a function of radius, one can expect a radially varying field gradient as well as potential emittance degradation. We have investigated this experimentally for a 1-mm-diameter active plasma lens. The measured near-axis field gradient is approximately 35% larger than expected for a uniform current distribution, and at overfocusing currents ring-shaped electron beams are observed. These observations are explained by simulations.

We reply to Terzic and Krafft’s forgoing Comment [Phys. Rev. Accel. Beams, Comment on “Controlling the spectral shape of nonlinear Thomson scattering with proper laser chirping” 19 (2016)PRABCJ2469-9888]. We disagree with the conclusion of the Comment regarding the novelty of solutions and the citations presented in our paper.

The theory of a plasma undulator excited by a short intense laser pulse in a parabolic plasma channel is presented. The undulator fields are generated either by the laser pulse incident off-axis and/or under the angle with respect to the channel axis. Linear plasma theory is used to derive the wakefield structure. It is shown that the electrons injected into the plasma wakefields experience betatron motion and undulator oscillations. Optimal electron beam injection conditions are derived for minimizing the amplitude of the betatron motion, producing narrow-bandwidth undulator radiation. Polarization control is readily achieved by varying the laser pulse injection conditions.

Effects of nonlinearity in Thomson scattering of a high intensity laser pulse from electrons are analyzed. Analytic expressions for laser pulse shaping in frequency (chirping) are obtained which control spectrum broadening for high laser pulse intensities. These analytic solutions allow prediction of the spectral form and required laser parameters to avoid broadening. Results of analytical and numerical calculations agree well. The control over the scattered radiation bandwidth allows narrow bandwidth sources to be produced using high scattering intensities, which in turn greatly improves scattering yield for future x- and gamma-ray sources.

The laser driven acceleration of ions is considered a promising candidate for an ion source for hadron therapy of oncological diseases. Though proton and carbon ion sources are conventionally used for therapy, other light ions can also be utilized. Whereas carbon ions require 400 MeV per nucleon to reach the same penetration depth as 250 MeV protons, helium ions require only 250 MeV per nucleon, which is the lowest energy per nucleon among the light ions (heavier than protons). This fact along with the larger biological damage to cancer cells achieved by helium ions, than that by protons, makes this species an interesting candidate for the laser driven ion source. Two mechanisms (magnetic vortex acceleration and hole-boring radiation pressure acceleration) of PW-class laser driven ion acceleration from liquid and gaseous helium targets are studied with the goal of producing 250 MeV per nucleon helium ion beams that meet the hadron therapy requirements. We show that He^{3} ions, having almost the same penetration depth as He^{4} with the same energy per nucleon, require less laser power to be accelerated to the required energy for the hadron therapy.

The minimum obtainable transverse emittance (thermal emittance) of electron beams generated and trapped in plasma-based accelerators using laser ionization injection is examined. The initial transverse phase space distribution following ionization and passage through the laser is derived, and expressions for the normalized transverse beam emittance, both along and orthogonal to the laser polarization, are presented. Results are compared to particle-in-cell simulations. Ultralow emittance beams can be generated using laser ionization injection into plasma accelerators, and examples are presented showing normalized emittances on the order of tens of nm.

A method to inject electron beams with controllable transverse emittances in a laser-plasma accelerators is proposed and analyzed. It uses two colliding laser pulses that propagate transversely to the plasma wave. For colliding pulses with equal frequencies, a beam with very low emittance is generated when the collision is close to the density peak of the plasma wave. Electrons near the axis are accelerated longitudinally by the ponderomotive force of the colliding pulses, accelerated transversely by the beat wave, and subsequently injected into the second bucket of the wake. Ionization is used to increase the transverse injection area and the final trapped charge. Simulations show that the transverse emittance can be less than the 0.1 mm mrad level, which is important for many applications. For colliding laser pulses with different frequencies, the beat wave can produce asymmetric injection, which can enhance betatron radiation generated by the electron beam.

We reply to Lebedev and Nagaitsev’s foregoing Comment [Phys. Rev. ST Accel. Beams 16, 108001 (2013)PRABFM1098-4402]. We disagree with the conclusion of the Comment that scattering imposes a fundamental limitation on plasma-based accelerator technology. Laser-plasma accelerators are compatible with high-luminosity collider concepts.

The development of models and the “Virtual Detector for Synchrotron Radiation” (vdsr) code that accurately describe the production of synchrotron radiation are described. These models and code are valid in the classical and linear (single-scattering) quantum regimes and are capable of describing radiation produced from laser-plasma accelerators (LPAs) through a variety of mechanisms including betatron radiation, undulator radiation, and Thomson/Compton scattering. Previous models of classical synchrotron radiation, such as those typically used for undulator radiation, are inadequate in describing the radiation spectra from electrons undergoing small numbers of oscillations. This is due to an improper treatment of a mathematical evaluation at the end points of an integration that leads to an unphysical plateau in the radiation spectrum at high frequencies, the magnitude of which increases as the number of oscillation periods decreases. This is important for betatron radiation from LPAs, in which the betatron strength parameter is large but the number of betatron periods is small. The code vdsr allows the radiation to be calculated in this regime by full integration over each electron trajectory, including end-point effects, and this code is used to calculate betatron radiation for cases of experimental interest. Radiation from Thomson scattering and Compton scattering is also studied with vdsr. For Thomson scattering, radiation reaction is included by using the Sokolov method for the calculation of the electron dynamics. For Compton scattering, quantum recoil effects are considered in vdsr by using Monte Carlo methods. The quantum calculation has been benchmarked with the classical calculation in a classical regime.

Beam-beam interaction constraints modify the basic plasma density scalings for a linear collider based on laser-plasma accelerators. In the quantum beamstrahlung regime, it is shown that operating at low plasma density increases beamstrahlung effects, owing to the higher bunch charge and longer bunch length. At high plasma density, the bunch charge is limited by beam loading, and the required power is proportional to the square root of the plasma density. At low plasma density, the bunch charge is limited by beamstrahlung, which, for fixed luminosity, requires operation at higher laser repetition rate and, hence, higher power requirements, or the use of multibunch trains. If round beams are used in a multibunch train format with fixed beam loading, and the collider is constrained by beamstrahlung, then the required collider power is independent of plasma density.

Higher-order laser modes are analyzed as a method to control focusing forces and improve the electron bunch quality in laser-plasma accelerators. In the linear wake regime, the focusing force is proportional to the transverse gradient of the laser intensity, which can be shaped by a superposition of modes. In particular, the transverse wakefield can be arbitrarily small in a region about the axis by adjusting the laser modes. Plasma channel effects, which prohibit the formation of the controlled-focusing region, can be mitigating by introducing a delay between the modes. Modes with parallel polarization produce a beat interference in the laser intensity, which lead to deflecting forces. This can be avoided by using modes with orthogonal polarization, different frequencies, or short pulses that do not overlap. Particle-in-cell simulations are performed of a laser-plasma accelerator in the quasilinear regime driven by high-order modes. Simulations show that, by including the first-order mode, the matched radius of the electron bunch is substantially increased, which for fixed bunch density and emittance implies an increase in the beam charge.

Physics considerations for a next-generation linear collider based on laser-plasma accelerators are discussed. The ultrahigh accelerating gradient of a laser-plasma accelerator and short laser coupling distance between accelerator stages allows for a compact linac. Two regimes of laser-plasma acceleration are discussed. The highly nonlinear regime has the advantages of higher accelerating fields and uniform focusing forces, whereas the quasilinear regime has the advantage of symmetric accelerating properties for electrons and positrons. Scaling of various accelerator and collider parameters with respect to plasma density and laser wavelength are derived. Reduction of beamstrahlung effects implies the use of ultrashort bunches of moderate charge. The total linac length scales inversely with the square root of the plasma density, whereas the total power scales proportional to the square root of the density. A 1 TeV center-of-mass collider based on stages using a plasma density of 10^{17} cm^{-3} requires tens of J of laser energy per stage (using 1 μm wavelength lasers) with tens of kHz repetition rate. Coulomb scattering and synchrotron radiation are examined and found not to significantly degrade beam quality. A photon collider based on laser-plasma accelerated beams is also considered. The requirements for the scattering laser energy are comparable to those of a single laser-plasma accelerator stage.

Theoretical and numerical studies of the transport in vacuum of multi-nC, multi-MeV electron beams are performed using several methods, including envelope models, a novel semianalytic approach using ellipsoidal shell decomposition, a modified electrostatic particle-in-cell method, and a point-to-point interaction model. The effects of space-charge forces on the longitudinal and transverse bunch properties are evaluated for various bunch lengths, energies, energy spreads, and charges. An evaluation of the various methods for studying space-charge effects in large energy spread, high charge beams is summarized. Examples are given for beam distributions typical of those generated by plasma-based accelerators. It is found that, for the highly correlated beams produced in the self-modulated regime, the high energy portion of the beam can gain significant energy while propagating in vacuum due to space-charge effects.

Electron bunches produced in self-modulated laser wakefield experiments usually have a broad energy distribution, with most electrons at low energy (1–3 MeV) and only a small fraction at high energy. We propose and investigate further acceleration of such bunches in a channel-guided resonant laser wakefield accelerator. Two-dimensional simulations with and without the effects of self-consistent beam loading are performed and compared. These results indicate that it is possible to trap about 40% of the injected bunch charge and accelerate this fraction to an average energy of about 50 MeV in a plasma channel of a few mm.

A plasma decelerating stage is investigated as a compact alternative for the disposal of high-energy beams (beamdumps). This could benefit the design of laser-driven plasma accelerator (LPA) applications that require transportability and or high-repetition-rate operation regimes. Passive and laser-driven (active) plasma-based beam dumps are studied analyticallyand with particle-in-cell (PIC) simulations in a 1D geometry. Analytical estimates for the beam energy loss are comparedto and extended by the PIC simulations, showing that with the proposed schemes a beam can be efficiently decelerated in acentimeter-scale distance.