Search

The Ma_MISS spectrometer is integrated within the drilling system of the Rosalind Franklin ExoMars rover. This paper reports the on-ground calibration campaign performed on the spectrometer. Here, we focus on the spectral calibration of the instrument. The experimental setup used to carry out calibration is described, and the methods used for data processing and key parameters retrieval are explained. In particular, the spectral parameters such as (i) pixel central wavelengths, (ii) spectral response function, (iii) spectral resolution, (iv) sampling, and (v) range are determined. In a follow-up paper, the linearity and radiometric calibrations are described, while in De Sanctis et al. [Planet. Sci. J. 3, 142 (2022)], the validation of spectral measurements performed on synthetic and natural rock targets is presented.

Occator Crater on dwarf planet Ceres hosts the so-called faculae, several areas with material 5 to 10 times the albedo of the average Ceres surface: Cerealia Facula, the brightest and largest, and several smaller faculae, Vinalia Faculae, located on the crater floor. The mineralogy of the whole crater is analyzed in this work. Spectral analysis is performed from data of the VIR instrument on board the Dawn spacecraft. We analyse spectral parameters of all main absorption bands, photometry, and continuum slope. Because most of the absorption features are located in a spectral range affected by thermal emission, we developed a procedure for thermal removal. Moreover, quantitative modeling of the measured spectra is performed with a radiative transfer model in order to retrieve abundance and grain size of the identified minerals. Unlike the average Ceres surface that contains a dark component, Mg-Ca-carbonate, Mg-phyllosilicates, and NH4-phyllosilicates, the faculae contain mainly Na-carbonate, Al-phyllosilicates, and NH4-chloride. The present work establishes unambiguously the presence of NH4-chloride thanks to the high-spatial resolution data. Vinalia and Cerealia Faculae show significant differences in the concentrations of these minerals, which have been analyzed. Moreover, heterogeneities are also found within Cerealia Facula that might reflect different deposition events of bright material. An interesting contrast in grain size is found between the center (10-60 μm) and the crater floor/peripheral part of the faculae (100-130 μm), pointing to different cooling time of the grains, respectively faster and slower, and thus to different times of emplacement. This implies the faculae formation is more recent than the crater impact event, consistent with other observations reported in this special issue. For some ejecta, we derived larger concentrations of minerals producing the absorption bands, and smaller grains with respect to the surrounding terrain. This may be related to heterogeneities in the material pre-existent to the impact event.

An essential part of the Exomars 2022 payload is the Mars Multispectral Imager for Subsurface Studies (Ma_MISS) experiment hosted by the drill system. Ma_MISS is a visible and near-infrared (0.4–2.3 μm) miniaturized spectrometer with an optical head inside the drill tip capable of observing the drill borehole with a spatial resolution of 120 μm. Here we report on how the Ma_MISS hyperspectral information provides in situ investigation of the subsurface at very fine resolution, prior to the collection of the samples that will be manipulated and crushed for further analysis by the analytical laboratory on the rover. Ma_MISS is the instrument that will closely investigate the subsurface mineralogical characteristics in its original geologic context at depths never reached before in Mars exploration. Ma_MISS recognizes all the major spectral features of the clays, basaltic, and minor phases expected at the ExoMars landing site, Oxia Planum. The high spatial resolution on the borehole wall is such that single grains of about 100 μm can be distinguishable in the assemblage of minerals observed by Ma_MISS. The spatial distribution of the mineralogies within the borehole walls is associated with the rocks and the processes that put these materials in place and possibly altered them with time, characterizing the habitats found in the stratigraphic record, indicating which ones are the most suitable to have held or to be holding nowadays traces of life.

We study the surface of Ceres at visible wavelengths, as observed by the Visible and InfraRed mapping spectrometer (VIR) onboard the Dawn spacecraft, and analyze the variations of various spectral parameters across the whole surface. We also focus on several noteworthy areas of the surface of this dwarf planet. We made use of the newly corrected VIR visible data to build global maps of a calibrated radiance factor at 550 nm, with two color composites and three spectral slopes between 400 and 950 nm. We have made these maps available for the community via the Aladin Desktop software. Ceres surface shows diverse spectral behaviors in the visible range. The color composite and the spectral slope between 480 and 800 nm highlight fresh impact craters and young geologic formations of endogenous origin, which appear bluer than the rest of the surface. The steep slope before 465 nm displays very distinct variations and may be a proxy for the absorptions caused by the $O_2^{-}$ -> $Fe^{3+}$ or the $2Fe^{3+}$ -> $Fe^{2+} + Fe^{4+}$ charge transfer, if the latter are found to be responsible for the drop in this spectral range. We notice several similarities between the spectral slopes and the abundance of phyllosilicates detected in the infrared by the VIR, whereas no correlation can be clearly established with carbonate species. The region of the Dantu impact crater presents a peculiar spectral behavior (especially through the color and the spectral slope before 465 nm) suggesting a change in composition or in the surface physical properties that is not observed elsewhere on Ceres., 22 pages, 14 + 5 figures. Published online on Astronomy and Astrophysics on 07-10-2020

We present an analysis of the areal distribution of spectral parameters derived from the VIR imaging spectrometer on board NASA/Dawn spacecraft. Specifically we studied the Occator quadrangle of Ceres, which is bounded by latitudes 22°S to 22°N and longitudes 214°E to 288°E, as part of the overall study of Ceres’ surface composition reported in this special publication. The spectral parameters used are the photometrically corrected reflectance at 1.2 µm, the infrared spectral slope (1.1–1.9 µm), and depths of the absorption bands at 2.7 µm and 3.1 µm that are ascribed to hydrated and ammoniated materials, respectively. We find an overall correlation between 2.7 µm and 3.1 µm band depths, in agreement with Ceres global behavior, and band depths are shallower and the spectral slope is flatter for younger craters, probably due to physical properties of regolith such as grain size. Spectral variations correlated with the tali geological unit also suggest differences in physical properties. The deepest band, indicating enrichment of ammoniated phyllosilicates, are associated with ejecta generated by impacts that occurred in southern quadrangles. The most peculiar region of this quadrangle is the Occator crater (20°N 240°E). The internal crater area contains two faculae, which are the brightest areas on Ceres due to exposure of sodium carbonates, and by two types of ejecta, dark and bright, with different spectral properties, probably due to different formation, evolution or age.

The dwarf planet Ceres is a heavily cratered rocky body, and complex craters with a central peak are widely observed on its surface. These types of craters form when a large body impacts the surface, generating extreme temperatures and pressures. During the impact event a large volume of rock is raised from the subsurface and a central uplift is formed. The material composing the central uplift is called crater central peak material (ccp) and the spectral analysis of such geologic areas can provide information about the composition of Ceres’ subsurface. Reflectance spectra of 32 ccps, acquired by the VIR spectrometer on board the NASA/Dawn spacecraft, were analyzed and shows absorption bands located at about 2.7, 3.1, 3.4 and 4.0 µm which are also common on the Cerean surface. These absorptions are related, respectively, to Mg-phyllosilicates, NH4-phyllosilicates and Mg/Ca-carbonates. The spectral parameters considered in this work are: spectral slopes estimated between 1.2 µm and 1.9 µm, band depths at 2.7-, 3.1-, 3.4- and 4.0-µm, and band centers near 4.0-µm. The ccps spectral parameters were analyzed in conjunction with other Cerean parameters, such as the estimated depth of excavation of the material composing the central peak, in order to search for correlations and information about Ceres’ subsurface. Central peak material located polewards show stronger 2.7- and 3.1-µm band depths with respect to those at the equatorial region, suggesting that subsurface deposits closer to poles are probably richer in Mg- and NH4-phyllosilicates. The 3.4-µm spectral feature is also deeper in ccps located at poleward latitudes, similar to the phyllosilicates. Conversely, the 4.0-µm band does not show this trend with latitude. An increase in both 3.1- and 3.4-µm band depths with the estimated depth of excavation indicates that the spectral feature at 3.4-µm is the result of different contributions from carbonates and NH4-phyllosilicates, as expected. However, depending on their relative influence, the shape of the 3.4-µm spectral feature can vary. Phyllosilicates and carbonates are the resulting products of aqueous alteration of chondritic material and, given the increasing abundance of such minerals (in particular ammoniated phyllosilicates) with depth of excavation, it is likely that our investigation involved subsurface layers nearby the boundary between the volatile-rich crust and the silicate-rich mantle. Na-carbonate is found in the crater central peak material of Ernutet, Haulani and Ikapati, characterized by an estimated depth of excavation of about 6–9 km, where deposits of sodium carbonates could be locally present.

We studied the distribution in the Urvara–Yalode region of Ceres (latitudes 21–66°S, longitudes 180–360°E) of main spectral parameters derived from the VIR imaging spectrometer onboard the NASA/Dawn spacecraft, as an overall study of Ceres mineralogy reported in this special issue. In particular, we analyzed the distribution of reflectance at 1.2 µm, band depth at 2.7 and 3.1 µm, ascribed to magnesium and ammoniated phyllosilicates, respectively. Whereas the average band depths of this region are lower than eastern longitudes, reflecting the E-W dichotomy of abundance of phyllosilicates on Ceres, spectral variations inside this region are observed in the following units: (a) the central peak of the Urvara crater (45.9°S, 249.2°E, 170 km in diameter), showing a deep 3.1 µm band depth, indicating an ammonium enrichment; (b) the cratered terrain westwards of the Yalode basin (42.3°S, 293.6°E, 260 km in diameter), where absorption bands are deeper, probably due to absence of phyllosilicates depletion following the Yalode impact; (c) the hummocky cratered floor of Yalode and Besua (42.4°S, 300.2°E) craters, characterized by lower albedo and band depths, probably due to different roughness; (d) Consus (21°S 200°E) and Tawals (39.1°S, 238°E) craters, whose albedo and band depths decreasing could be associated to different grain size or abundance of dark materials. Twenty-two small scale (i.e., lower than 400 m) bright spots are observed: because their composition is similar to the Ceres average, a strong mixing may have occurred since their formation.

Ceres has been explored by NASA/Dawn spacecraft, which allowed for the discovery of the main mineralogical and compositional characteristics of Ceres' surface. Here, we use mainly data from the Visible and InfraRed imaging spectrometer (VIR) in order to investigate the main spectral characteristics of the quadrangle Ac-H-2 Coniraya, one of the 15 quads in which Ceres' surface has been divided. Coniraya quadrangle is characterized by the presence of mostly highly degraded impact craters of diameters between 50 and 200 km and clusters of small to midsize impact craters. Although the composition over the quadrangle appears to be quite uniform, significant differences have been detected between different craters by spectral parameters analysis and spectral modeling. Ernutet crater presents two regions with very peculiar band at 3.4 μm, typical of organics aliphatic material. One region result to be correlated with larger amount of carbonates, the other region does not present such correlation. Ikapati crater shows strong absorption bands at 4.0 μm, indicating the presence of Na-carbonates in the floor and ejecta. Ikapati, Gaue and other craters present smaller spectral features of NH4 and/or OH stretching, suggesting a volatile depletion process induced by the heating of the impact event.

Data acquired at Ceres by the visible channel of the Visible and InfraRed mapping spectrometer (VIR) on board the NASA Dawn spacecraft are affected by the temperatures of both the visible (VIS) and the infrared (IR) sensors, which are respectively a CCD and a HgCdTe array. The variations of the visible channel temperatures measured during the sessions of acquisitions are correlated with variations in the spectral slope and shape for all the mission phases. The infrared channel (IR) temperature is more stable during the acquisitions, nonetheless it is characterized by a bi-modal distribution whether the cryocooler (and therefore the IR channel) is used or not during the visible channel operations. When the infrared channel temperature is high (175K, i.e. not in use and with crycooler off), an additional negative slope and a distortion are observed in the spectra of the visible channel. We developed an empirical correction based on a reference spectrum for the whole data set; it is designed to correct the two issues related to the sensor temperatures that we have identified. The reference spectrum is calculated to be representative of the global Ceres' surface. It is also made of data acquired when the visible and infrared channel temperatures are equal to the ones measured during an observation of the Arcturus star by VIR, which is consistent with several ground-based observations. The developed correction allows reliable analysis and mapping to be performed by minimizing the artifacts induced by fluctuations of the VIS temperature. Thanks to this correction, a direct comparison between different mission phases during which VIR experienced different visible and infrared channel temperatures is now possible., Comment: The following article has been accepted by Review of Scientific Instruments on 24 November 2019. After it is published, it will be found at this link: https://publishing.aip.org/resources/librarians/products/journals/

This work describes the correction method applied to the dataset acquired at the asteroid (4) Vesta by the visible channel of the visible and infrared mapping spectrometer. The rising detector temperature during data acquisitions in the visible wavelengths leads to a spectral slope increase over the whole spectral range. This limits the accuracy of the studies of the Vesta surface in this wavelength range. Here, we detail an empirical method to correct for the visible detector temperature dependency while taking into account the specificity of the Vesta dataset., Comment: 6 pages, 5 figures and 1 table excluding supplementary material

The exploration and use of outer space is the province of all humankind. This principle in Article I of the UN Outer Space Treaty guarantees the freedom to explore outer space, including the Moon and other celestial bodies, without discrimination, and to carry out scientific investigations. This freedom, however, comes with a responsibility described in Article IX of the same Treaty. It states that space activities have to be conducted with due regard to the corresponding interests of all other States Parties to the Treaty. The avoidance of potentially harmful interference with activities of other States Parties is central. The harmful contamination of the Moon and other celestial bodies and the need to ensure safety of the Earth are highlighted in this context. With the entry into force of the Outer Space Treaty in 1967, planetary protection became part of international law. In observance of those treaty obligations, an international standard for planetary protection has been developed by the Committee on Space Research (COSPAR) which provides a forum for international consultation and has formulated a Planetary Protection Policy with associated requirements that are put in place after examination of the most updated relevant scientific studies and recommendations made by the COSPAR Panel on Planetary Protection.

Return of samples from the surface of Mars has been a goal of the international Mars science community for many years. Affirmation by NASA and ESA of the importance of Mars exploration led the agencies to establish the international MSR Objectives and Samples Team (iMOST). The purpose of the team is to re-evaluate and update the sample-related science and engineering objectives of a Mars Sample Return (MSR) campaign. The iMOST team has also undertaken to define the measurements and the types of samples that can best address the objectives. Seven objectives have been defined for MSR, traceable through two decades of previously published international priorities. The first two objectives are further divided into sub-objectives. Within the main part of the report, the importance to science and/or engineering of each objective is described, critical measurements that would address the objectives are specified, and the kinds of samples that would be most likely to carry key information are identified. These seven objectives provide a framework for demonstrating how the first set of returned Martian samples would impact future Martian science and exploration. They also have implications for how analogous investigations might be conducted for samples returned by future missions from other solar system bodies, especially those that may harbor biologically relevant or sensitive material, such as Ocean Worlds (Europa, Enceladus, Titan) and others. Summary of Objectives and Sub-Objectives for MSR Identified by iMOST: Objective 1 Interpret the primary geologic processes and history that formed the Martian geologic record, with an emphasis on the role of water. Intent To investigate the geologic environment(s) represented at the Mars 2020 landing site, provide definitive geologic context for collected samples, and detail any characteristics that might relate to past biologic processesThis objective is divided into five sub-objectives that would apply at different landing sites. 1.1 Characterize the essential stratigraphic, sedimentologic, and facies variations of a sequence of Martian sedimentary rocks. Intent To understand the preserved Martian sedimentary record. Samples A suite of sedimentary rocks that span the range of variation. Importance Basic inputs into the history of water, climate change, and the possibility of life 1.2 Understand an ancient Martian hydrothermal system through study of its mineralization products and morphological expression. Intent To evaluate at least one potentially life-bearing “habitable” environment Samples A suite of rocks formed and/or altered by hydrothermal fluids. Importance Identification of a potentially habitable geochemical environment with high preservation potential. 1.3 Understand the rocks and minerals representative of a deep subsurface groundwater environment. Intent To evaluate definitively the role of water in the subsurface. Samples Suites of rocks/veins representing water/rock interaction in the subsurface. Importance May constitute the longest-lived habitable environments and a key to the hydrologic cycle. 1.4 Understand water/rock/atmosphere interactions at the Martian surface and how they have changed with time. Intent To constrain time-variable factors necessary to preserve records of microbial life. Samples Regolith, paleosols, and evaporites. Importance Subaerial near-surface processes could support and preserve microbial life. 1.5 Determine the petrogenesis of Martian igneous rocks in time and space. Intent To provide definitive characterization of igneous rocks on Mars. Samples Diverse suites of ancient igneous rocks. Importance Thermochemical record of the planet and nature of the interior. Objective 2 Assess and interpret the potential biological history of Mars, including assaying returned samples for the evidence of life. Intent To investigate the nature and extent of Martian habitability, the conditions and processes that supported or challenged life, how different environments might have influenced the preservation of biosignatures and created nonbiological “mimics,” and to look for biosignatures of past or present life.This objective has three sub-objectives: 2.1 Assess and characterize carbon, including possible organic and pre-biotic chemistry. Samples All samples collected as part of Objective 1. Importance Any biologic molecular scaffolding on Mars would likely be carbon-based. 2.2 Assay for the presence of biosignatures of past life at sites that hosted habitable environments and could have preserved any biosignatures. Samples All samples collected as part of Objective 1. Importance Provides the means of discovering ancient life. 2.3 Assess the possibility that any life forms detected are alive, or were recently alive. Samples All samples collected as part of Objective 1. Importance Planetary protection, and arguably the most important scientific discovery possible. Objective 3 Quantitatively determine the evolutionary timeline of Mars. Intent To provide a radioisotope-based time scale for major events, including magmatic, tectonic, fluvial, and impact events, and the formation of major sedimentary deposits and geomorphological features. Samples Ancient igneous rocks that bound critical stratigraphic intervals or correlate with crater-dated surfaces. Importance Quantification of Martian geologic history. Objective 4 Constrain the inventory of Martian volatiles as a function of geologic time and determine the ways in which these volatiles have interacted with Mars as a geologic system. Intent To recognize and quantify the major roles that volatiles (in the atmosphere and in the hydrosphere) play in Martian geologic and possibly biologic evolution. Samples Current atmospheric gas, ancient atmospheric gas trapped in older rocks, and minerals that equilibrated with the ancient atmosphere. Importance Key to understanding climate and environmental evolution. Objective 5 Reconstruct the processes that have affected the origin and modification of the interior, including the crust, mantle, core and the evolution of the Martian dynamo. Intent To quantify processes that have shaped the planet's crust and underlying structure, including planetary differentiation, core segregation and state of the magnetic dynamo, and cratering. Samples Igneous, potentially magnetized rocks (both igneous and sedimentary) and impact-generated samples. Importance Elucidate fundamental processes for comparative planetology. Objective 6 Understand and quantify the potential Martian environmental hazards to future human exploration and the terrestrial biosphere. Intent To define and mitigate an array of health risks related to the Martian environment associated with the potential future human exploration of Mars. Samples Fine-grained dust and regolith samples. Importance Key input to planetary protection planning and astronaut health. Objective 7 Evaluate the type and distribution of in-situ resources to support potential future Mars exploration. Intent To quantify the potential for obtaining Martian resources, including use of Martian materials as a source of water for human consumption, fuel production, building fabrication, and agriculture. Samples Regolith. Importance Production of simulants that will facilitate long-term human presence on Mars. Summary of iMOST Findings: Several specific findings were identified during the iMOST study. While they are not explicit recommendations, we suggest that they should serve as guidelines for future decision making regarding planning of potential future MSR missions. The samples to be collected by the Mars 2020 (M-2020) rover will be of sufficient size and quality to address and solve a wide variety of scientific questions. Samples, by definition, are a statistical representation of a larger entity. Our ability to interpret the source geologic units and processes by studying sample sub sets is highly dependent on the quality of the sample context. In the case of the M-2020 samples, the context is expected to be excellent, and at multiple scales. (A) Regional and planetary context will be established by the on-going work of the multi-agency fleet of Mars orbiters. (B) Local context will be established at field area- to outcrop- to hand sample- to hand lens scale using the instruments carried by M-2020. A significant fraction of the value of the MSR sample collection would come from its organization into sample suites, which are small groupings of samples designed to represent key aspects of geologic or geochemical variation. If the Mars 2020 rover acquires a scientifically well-chosen set of samples, with sufficient geological diversity, and if those samples were returned to Earth, then major progress can be expected on all seven of the objectives proposed in this study, regardless of the final choice of landing site. The specifics of which parts of Objective 1 could be achieved would be different at each of the final three candidate landing sites, but some combination of critically important progress could be made at any of them. An aspect of the search for evidence of life is that we do not know in advance how evidence for Martian life would be preserved in the geologic record. In order for the returned samples to be most useful for both understanding geologic processes (Objective 1) and the search for life (Objective 2), the sample collection should contain BOTH typical and unusual samples from the rock units explored. This consideration should be incorporated into sample selection and the design of the suites. The retrieval missions of a MSR campaign should (1) minimize stray magnetic fields to which the samples would be exposed and carry a magnetic witness plate to record exposure, (2) collect and return atmospheric gas sample(s), and (3) collect additional dust and/or regolith sample mass if possible.

Spectral parameters of Ceres measured by the Dawn/VIR imaging spectrometer are studied as a function of illumination angles, by applying a semi-empirical method based on a statistical analysis of the VIR dataset acquired up to September 2016. The study also focuses on the photometry of the Occator faculae, i.e. the brightest spots of the Ceres surface, showing an albedo up to eight times the Ceres average. The considered semi-empirical approach takes into account the small extension (and hence small dataset) of this region and lays the groundwork to apply scattering models even on such a limited area. The behavior of Ceres visible and infrared reflectance with phase angle is similar to other asteroids belonging to its same spectral class, i.e. C-type. The depth of the bands at 2.7 µm (phyllosilicates), 3.1 µm (ammonium), 3.4 µm (magnesium carbonates) and the infrared spectral slope linearly increase with phase angle, showing analogies with other asteroids and occurrence of phase reddening. The different behavior of the 3.9 µm band depth (also due to Mg carbonates), independent of illumination angles, could indicate that other carriers contribute to the 3.4 µm band and play a more important role in photometry outside the carbonate deposits. The phase function of the Occator faculae is much steeper than expected from its high albedo. Mixture of bright and dark material and larger roughness can be at the basis of this result. The phyllosilicate bands show a steeper increase with phase angle with respect to the Ceres average, due to the lower presence of dark materials, and/or again larger roughness. The absence of trends with phase angles of the two carbonate bands and of the spectral slope suggests that carbonates do not produce phase reddening.

The Av-13 (Tuccia) and Av-14 (Urbinia) quadrangles are located in the south-west region of Vesta. They are characterized by a large topographic variability, from the highest (Vestalia terra highlands) to the lowest (Rheasilvia basin). Many geological units in these quadrangles are not associated with mineralogical variability, as shown by the color-composite maps. Maps of mafic absorption band-center position reveal that the principal lithology is eucrite-rich howardite, but diogenite-rich howardite areas are also present, corresponding to particular features such as Antonia and Justina craters, which are characterized by strong mafic absorptions. These quadrangles, especially Urbinia, contain many bright ejecta, such as those of Tuccia crater, which are the highest reflectance materials on Vesta (Zambon et al., 2014). Dark areas are present and correspond to regions with deeper OH-signature. The two quadrangles contain many vertical ridge crests associated with the Rheasilvia impact. These ridges do not show mineralogical differences with respect to their surroundings, but have a distinctive appearance in color-ratio composite images.

We investigate the region of crater Haulani on Ceres with an emphasis on mineralogy as inferred from data obtained by Dawn's Visible InfraRed mapping spectrometer (VIR), combined with multispectral image products from the Dawn Framing Camera (FC) so as to enable a clear correlation with specific geologic features. Haulani, which is one of the youngest craters on Ceres, exhibits a peculiar "blue" visible to near-infrared spectral slope, and has distinct color properties as seen in multispectral composite images. In this paper, we investigate a number of spectral indices: reflectance; spectral slopes; abundance of Mg-bearing and NH4-bearing phyllosilicates; nature and abundance of carbonates, which are diagnostic of the overall crater mineralogy; plus a temperature map that highlights the major thermal anomaly found on Ceres. In addition, for the first time we quantify the abundances of several spectral endmembers by using VIR data obtained at the highest pixel resolution ( 0.1 km). The overall picture we get from all these evidences, in particular the abundance of Na- and hydrous Na-carbonates at specific locations, confirms the young age of Haulani from a mineralogical viewpoint, and suggests that the dehydration of Na-carbonates in the anhydrous form Na2CO3 may be still ongoing.

The VIRTIS (Visible, Infrared and Thermal Imaging Spectrometer) instrument on board the Rosetta spacecraft has provided evidence of carbon-bearing compounds on the nucleus of the comet 67P/Churyumov-Gerasimenko. The very low reflectance of the nucleus (normal albedo of 0.060 ± 0.003 at 0.55 micrometers), the spectral slopes in visible and infrared ranges (5 to 25 and 1.5 to 5% kÅ(-1)), and the broad absorption feature in the 2.9-to-3.6-micrometer range present across the entire illuminated surface are compatible with opaque minerals associated with nonvolatile organic macromolecular materials: a complex mixture of various types of carbon-hydrogen and/or oxygen-hydrogen chemical groups, with little contribution of nitrogen-hydrogen groups. In active areas, the changes in spectral slope and absorption feature width may suggest small amounts of water-ice. However, no ice-rich patches are observed, indicating a generally dehydrated nature for the surface currently illuminated by the Sun.

This article is in the 99th percentile (ranked 308th) of the 357,891 tracked articles of a similar age in all journals and the 94th percentile (ranked 54th) of the 934 tracked articles of a similar age in Nature. In the top 5% of all research outputs scored by Altmetric Studies of the dwarf planet (1) Ceres using ground-based and orbiting telescopes have concluded that its closest meteoritic analogues are the volatile-rich CI and CM carbonaceous chondrites. Water in clay minerals, ammoniated phyllosilicates, or a mixture of Mg(OH)2 (brucite), Mg2CO3 and iron-rich serpentine have all been proposed to exist on the surface. In particular, brucite has been suggested from analysis of the mid-infrared spectrum of Ceres. But the lack of spectral data across telluric absorption bands in the wavelength region 2.5 to 2.9 micrometres—where the OH stretching vibration and the H2O bending overtone are found—has precluded definitive identifications. In addition, water vapour around Ceres has recently been reported, possibly originating from localized sources. Here we report spectra of Ceres from 0.4 to 5 micrometres acquired at distances from ~82,000 to 4,300 kilometres from the surface. Our measurements indicate widespread ammoniated phyllosilicates across the surface, but no detectable water ice. Ammonia, accreted either as organic matter or as ice, may have reacted with phyllosilicates on Ceres during differentiation. This suggests that material from the outer Solar System was incorporated into Ceres, either during its formation at great heliocentric distance or by incorporation of material transported into the main asteroid belt.

Although water vapour is the main species observed in the coma of comet 67P/Churyumov–Gerasimenko1, 2 and water is the major constituent of cometary nuclei3, 4, limited evidence for exposed water-ice regions on the surface of the nucleus has been found so far5, 6. The absence of large regions of exposed water ice seems a common finding on the surfaces of many of the comets observed so far7, 8, 9. The nucleus of 67P/Churyumov–Gerasimenko appears to be fairly uniformly coated with dark, dehydrated, refractory and organic-rich material10. Here we report the identification at infrared wavelengths of water ice on two debris falls in the Imhotep region of the nucleus. The ice has been exposed on the walls of elevated structures and at the base of the walls. A quantitative derivation of the abundance of ice in these regions indicates the presence of millimetre-sized pure water-ice grains, considerably larger than in all previous observations6, 7, 8, 9. Although micrometre-sized water-ice grains are the usual result of vapour recondensation in ice-free layers6, the occurrence of millimetre-sized grains of pure ice as observed in the Imhotep debris falls is best explained by grain growth by vapour diffusion in ice-rich layers, or by sintering. As a consequence of these processes, the nucleus can develop an extended and complex coating in which the outer dehydrated crust10 is superimposed on layers enriched in water ice. The stratigraphy observed on 67P/Churyumov–Gerasimenko11, 12 is therefore the result of evolutionary processes affecting the uppermost metres of the nucleus and does not necessarily require a global layering to have occurred at the time of the comet’s formation.

In this manuscript we present the mineralogic mapping of the Av-9 Numisia quadrangle of Vesta using the most up-to-date data from the NASA–Dawn mission. This quadrangle is located in Vesta’s equatorial zone (22° south to 22° north, 218° to 288° east, in Claudia coordinate system) and takes its name from the impact crater Numisia. The main feature, which dominates the quadrangle, is the Vestalia Terra plateau, a topographic high about 10 km above the surrounding areas. To the south, this region fades into the Rheasilvia basin, while to the north it is bounded by the steep scarp of Postumia basin. The Visible and Infrared mapping spectrometer (VIR) onboard NASA/Dawn provided the main data source for this work, at an unprecedented level of spatial and spectral resolution. In particular we are using spectral parameters to synthesize characteristics of the whole spectra into a single value. Pyroxene-related spectral parameters allow for the detection of lower crust or mantle material (diogenites) and upper crust material (eucrites) in the study area. The combined analysis of albedo from the Framing Camera, the geologic map and the spectroscopic data offer an interesting opportunity to understand better the surface features of this region of Vesta, and their evolution. Numisia, Cornelia, Fabia, Teia and Drusilla are the main craters in the study area, rich in bright and dark material outcrops, pitted terrains and OH-rich materials. Using the spectral parameters we demonstrate that the internal composition of Vestalia Terra is mainly diogenite-rich howardite, as shown by materials excavated by Cornelia and Fabia, and the composition of the slope north of Vestalia Terra. This agrees with the strong positive Bouguer Anomaly observed in the area, indicating a higher density of these features in relation to the surrounding areas. Besides the recently published works based on gravimetric modeling and geologic interpretation, the mineralogic mapping presented herein gives an additional contribution, in order to depict a more complete geologic history of the Numisia quadrangle of Vesta.

The VIRTIS (Visible, Infrared and Thermal Imaging Spectrometer) instrument on board the Rosetta spacecraft has provided evidence of carbon-bearing compounds on the nucleus of the comet 67P/Churyumov-Gerasimenko. The very low reflectance of the nucleus (normal albedo of 0.060 ± 0.003 at 0.55 micrometers), the spectral slopes in visible and infrared ranges (5 to 25 and 1.5 to 5% kÅ −1 ), and the broad absorption feature in the 2.9-to-3.6–micrometer range present across the entire illuminated surface are compatible with opaque minerals associated with nonvolatile organic macromolecular materials: a complex mixture of various types of carbon-hydrogen and/or oxygen-hydrogen chemical groups, with little contribution of nitrogen-hydrogen groups. In active areas, the changes in spectral slope and absorption feature width may suggest small amounts of water-ice. However, no ice-rich patches are observed, indicating a generally dehydrated nature for the surface currently illuminated by the Sun.

Observations of cometary nuclei have revealed a very limited amount of surface water ice, which is insufficient to explain the observed water outgassing. This was clearly demonstrated on comet 9P/Tempel 1, where the dust jets (driven by volatiles) were only partially correlated with the exposed ice regions. The observations of 67P/Churyumov-Gerasimenko have revealed that activity has a diurnal variation in intensity arising from changing insolation conditions. It was previously concluded that water vapour was generated in ice-rich subsurface layers with a transport mechanism linked to solar illumination, but that has not hitherto been observed. Periodic condensations of water vapour very close to, or on, the surface were suggested to explain short-lived outbursts seen near sunrise on comet 9P/Tempel 1. Here we report observations of water ice on the surface of comet 67P/Churyumov-Gerasimenko, appearing and disappearing in a cyclic pattern that follows local illumination conditions, providing a source of localized activity. This water cycle appears to be an important process in the evolution of the comet, leading to cyclical modification of the relative abundance of water ice on its surface.