Search

We present a single-shot detection method of terahertz-correlated second harmonic generation in plasma-based sources by directly mixing an optical probe into femtosecond laser-induced plasma filaments in air. The single-shot second harmonic trace is obtained by measuring second harmonic generation on a conventional CCD with a spatio-temporally distorted probe beam. The system shows a spectrometer resolution of 22 fs/pixel on the CCD and a true resolution on the order of the probe pulse duration. With considerable THz peak electric field strengths, this formalism can open the door to single-shot THz detection without bandwidth limitations.

We report a systematic investigation into the processes behind a near hundredfold enhanced second harmonic wave generated from a laser-induced air plasma, by examining the temporal dynamics of the frequency conversion processes, and the polarization of the emitted second harmonic beam. Contrary to typical nonlinear optical processes, the enhanced second harmonic generation efficiency is only observed within a sub-picosecond time window and found to be nearly constant across fundamental pulse durations spanning from 0.1 ps to over 2 ps. We further demonstrate that with the adopted orthogonal pump-probe configuration, the polarization of second harmonic field exhibits a complex dependence on the polarization of both input fundamental beams, contrasting with most of the previous experiments with a single-beam geometry.

Terahertz wave emission from condensed matter excited by intense laser pulses not only reflects the details in laser-matter interaction but also offers bright terahertz wave sources. Flowing liquid targets possess the advantage of providing a fresh area for each laser pulse. To demonstrate a debris-free target under laser excitation, we investigate the use of liquid nitrogen as a target. By creating a flowing liquid nitrogen line in the ambient environment, we successfully observe broadband terahertz wave emission under short pulse excitation. Our cryogenic line is able to sustain the excitation of a high-repetition-rate (1 kHz) laser. The terahertz peak field emitted from liquid nitrogen is comparable to that from liquid water, yet a broader bandwidth is observed. This demonstration prompts new opportunities in choosing potential materials for studying terahertz wave generation process and in understanding laser-induced ionization in different liquids., Comment: 16 pages, 4 figures

We experimentally show the spectrally averaged nonlinear refractive index and absorption coefficient for liquid water, water vapor, {\alpha}-pinene, and Si using a full-phase analysis in the terahertz regime through a standard time-domain spectrometer. Our results confirm that the nonlinear index of refraction of the liquid samples in this regime exceeds the near-infrared optical nonlinear index by six orders of magnitude. In the case of liquid water and water vapor at atmospheric pressure, we find a nonlinear index of 7.8x10^-10 cm^2/W and 6x10^-11 cm^2/W respectively, which are both much larger than expected., Comment: 5 pages, 2 figures, 1 table

Metals have been studied as terahertz sources for decades. Recent research has shown the potential of metals in generating extremely high THz pulse energy excited by intense laser pulses. To avoid the metal surface debris caused by laser pulses, here, we report the results of the broadband terahertz wave emission from a flowing liquid metal line excited by sub-picosecond laser pulses. The THz signal emitted from the liquid gallium line shows stronger field with broader bandwidth comparing with the signal from water under the identical optical excitation conditions. Our preliminary study suggests that the liquid metals have the potential to serve as efficient and powerful THz sources for the intense lasers with a high repetition rate.

Polar liquids are strong absorbers of electromagnetic waves in the terahertz range, therefore, historically such liquids have not been considered as good candidates for terahertz sources. However, flowing liquid medium has explicit advantages, such as a higher damage threshold compared to solid-state sources and more efficient ionization process compared to gases. Here we report systematic study of efficient generation of terahertz radiation in flat liquid jets under sub-picosecond single-color optical excitation. We demonstrate how medium parameters such as molecular density, ionization energy and linear absorption contribute to the terahertz emission from the flat liquid jets. Our simulation and experimental measurements reveal that the terahertz energy has quasi-quadratic dependence on the optical excitation pulse energy. Moreover, the optimal pump pulse duration, which depends on the thickness of the jet is theoretically predicted and experimentally confirmed. The obtained optical-to-terahertz energy conversion efficiency is more than 0.05%. It is comparable to the commonly used optical rectification in most of electro-optical crystals and two-color air filamentation. These results, significantly advancing prior research, can be successfully applied to create a new alternative source of terahertz radiation., Comment: 10 pages, 4 figures, 1 table, Optics Express

Recently, there has been growing interest in terahertz (THz) wave generation from liquids under optical excitation. Here, we propose and demonstrate the use of liquid lines in place of liquid films as THz emitters to boost THz signals. The geometry of the emitter eliminates the total internal reflection at the flat liquid-air interface. In addition, we observe that the polarity of the liquid has a significant influence on the THz wave generation. Alpha-pinene, a nonpolar liquid, offers much stronger THz radiation than water does. Besides paving the way to develop intense liquid THz sources, our work indicates that THz waves could be a tool for the further study of laser-liquid interaction.

Recently, computational sampling methods have been implemented to spatially characterize terahertz (THz) fields. Previous methods usually rely on either specialized THz devices such as THz spatial light modulators, or complicated systems requiring assistance from photon-excited free-carriers with high-speed synchronization among multiple optical beams. Here, by spatially encoding an 800 nm near-infrared (NIR) probe beam through the use of an optical SLM, we demonstrate a simple sampling approach that can probe THz fields with a single-pixel camera. This design does not require any dedicated THz devices, semiconductors or nanofilms to modulate THz fields. Through the use of computational algorithms, we successfully measure 128$\times$128 field distributions with a 62 $\mu m$ transverse spatial resolution, more than 15 times smaller than the central wavelength of the THz signal (940 $\mu m$). Benefitting from the non-invasive nature of THz radiation and sub-wavelength resolution of our system, this simple approach can be used in applications such as biomedical sensing, inspection of flaws. in industrial products, and so on., Comment: Main manuscript: 7 pages, 3 figures; Supplement: 8 pages, 3 figures

Semi-metals might offer a stronger interaction and a better confinement for terahertz wave than semiconductors, while preserve tunability. Particularly, graphene-based materials are envisioned as terahertz modulators, filters and ultra-broadband sources. However, the understanding of terahertz generation from those materials is still not clear, thus limits us recognizing the potential and improving device performances. Graphite, the mother material of graphene and a typical bulk semi-metal, is a good system to study semi-metals and graphene-based materials. Here we experimentally modulate and maximize the terahertz signal from graphite surface, thus reveal the mechanism - surface field driving photon induced carriers into transient current to radiate terahertz wave. We also discuss the differences between graphite and semiconductors; particularly graphite shows no temperature dependency from room temperature to 80C. Above knowledge will help us understand terahertz generations, achieve maximum output and electric modulation, in semi-metal or graphene based devices.

Two-dimensional materials such as MoS2 have attracted much attention in recent years due to their fascinating optoelectronic properties. Dielectric property of MoS2 is desired for the optoelectronic application. In this paper, terahertz (THz) time-domain spectroscopy and ellipsometry technology are employed to investigate the dielectric response of MoS2 crystal in THz and visible region. The real and imaginary parts of the complex dielectric constant of MoS2 crystal are found to follow a Drude model in THz region, which is due to the intrinsic carrier absorption. In visible region, the general trend of the complex dielectric constant is found to be described with a Lorentz model, while two remarkable peaks are observed at 1.85 and 2.03 eV, which have been attributed to the splitting arising from the combined effect of interlayer coupling and spin-orbit coupling. This work affords the fundamental dielectric data for the future optoelectronic applications with MoS2., Comment: 6 pages