Search

The aim of the paper is to examine the performance of molten carbonate fuel cell, which is supplied with a raw bioethanol, i.e. bioethanol which origins directly from fruit fermentation, without pre-treatment of fermentation products. The composition of raw bioethanol was precisely determined and then the impact of raw bioethanol on the degradation of molten carbonate fuel cells was examined. Steam to carbon ratio of the biofuel has been determined as 5.7 (in comparison to stoichiometry of reaction) which allowed for estimation of hydrogen production during steam reforming process taking place in the anode channel. The results in the form of current-voltage curve was obtained and compared with the same fuel cell fed with pure hydrogen, while the amount of hydrogen was defined as identical with the one after steam reforming of biofuel taking place in the nickel anode channel. Relevant literature studies were focused on the purified fuel or examination of the impact of individual components. Our study proved carbon deposition is not a problem, however solid particles contamination in fermentation product makes it impossible to use fuel cell fueled with fermentation product for longer periods, and prior to supplying fuel cell the bioethanol purification is required. A raw biofuel with its impurities did not have any impact on the anode and current collector surface from physical point of view, but Electrochemical Impedance Spectroscopy analysis shows visible increase of ohmic loses. • Homemade first generation bioethanol composition have been examined. • Manufactured bioethanol has been delivered directly to the MCFC anode without purification. • Performance of MCFC fueled with impure bioethanol has been investigated. • Effect of steam reforming for hydrogen generation and steam to carbon ratio were evaluated. • Pollution on the anode after cell operation was investigated with SEM and EIS. [ABSTRACT FROM AUTHOR]

This paper presents the results of research into improving the ionic conductivity of Molten Carbonate Fuel Cell by modifying the matrix material. So far, we have succeeded in using materials such as YSZ and SDC, but we are now trying to use powders based on Ba Na and TiO 2. These materials are characterized by their oxygen ion conductivity at elevated temperatures. A matrix of these materials was produced and used to build MCFCs. Based on the experiments carried out and the mathematical model of the fuel cell, the contribution of the oxygen ion conductivity to the total ionic conductivity was determined. • Research on oxygen ion conduction materials was performed. • BNT material has best oxygen ion conductivity parameters and was chosen for experiments. • New matrix made of BNT was manufactured. • Composite Li/K and BNT membrane was investigated under EIS and in fuel cell. • Model including ionic conductivity and tortuosity is presented and validated. [ABSTRACT FROM AUTHOR]

This paper reports the performance of a molten carbonate fuel cell (MCFC) fed directly with liquid fuels referenced against results with hydrogen fuel in experiments conducted by the research team. Alcohols have greater energy density than pure hydrogen in normal conditions and, if presented as biofuels, the MCFC can be deemed a renewable energy source. For evaluation purposes various alcohols occurring in standard conditions in the liquid state were used for electricity generation in the MCFC: methanol, ethanol, propanol, butanol and glycerol. Since these alcohols can be subjected to steam reforming when mixed with water in specific ratios, they can be delivered directly in the liquid state to the fuel cell, where hydrogen is released and used to produce electricity and heat. The alcohols were mixed with water in ratios of 1:2, 1:3, 1:4. The results were compared to the MCFC fed with pure hydrogen as a fuel. In terms of power referenced to hydrogen (100%), the maximums achieved were 78% for butanol, 80% for glycerol, 83% for propanol, 86% for ethanol and 93% for methanol in comparison to the same amount of hydrogen delivered to the fuel cell in ideal steam reforming situation. Threats such as carbon deposition on the fuel cell surface were also evaluated. • MCFC fed directly with various mixtures of alcohols and water have been studied. • The steam reforming of mixtures of alcohols and water generates energy. • Temperature and anode material provide the necessary conditions for steam reforming. • Maximum power compared to hydrogen fuel for various fuels ranges between 78 and 93%. • Carbon deposition in the anode channel of commercial units can be a problem. [ABSTRACT FROM AUTHOR]

The article presents a comparison of mathematical models of steam methane reforming. The analysis is divided into two parts. The first concerns the reforming process using separate steam reformers. The second part of the article compares models of steam methane reforming processes directly inside fuel cells. Due to the fact that the steam reforming process takes place at very high temperatures, internal steam reforming can only be carried out in high temperature fuel cells. Therefore, the second part of the article deals with molten carbonate fuel cells and solid oxide fuel cells powered by methane. In the case of both of fuel cells, the methane steam reforming may take place directly on the anodes of these electrochemical devices. The mathematical models (for both external and internal reforming) were compared based on available experimental data. In this analysis of mathematical models, particular attention was paid to the causes of discrepancies between the mathematical models and the experimental data. The steam reforming process is influenced by a number of different parameters such as: temperature, ratio of the amount of water vapor to carbon contained in the fuel (steam to carbon ratio), reaction time, presence of a catalyst, type of catalyst and many others. The models presented in this article were also compared in terms of taking into account various parameters that may affect the process of steam reforming. An attempt was also made to assess the accuracy of mathematical models. Unfortunately, for most of the equations considered in this article, numerical values for inaccuracies are not given or described as acceptable or minor. • Review of mathematical models of SMR. • The kinetics models of the steam methane reforming reaction. • Description of mathematical models for the molten carbonate fuel cell (MCFC). [ABSTRACT FROM AUTHOR]

This article deals with a thermal energy storage system in the form of a water tank with a thermocline. The well-known thermocline phenomenon is modeled using computational fluid dynamics (CFD). However, the reservoir model proposed in this article is zero-dimensional. This is due to the fact that the aim of this article is to build a mathematical model that will be more useful in mathematical models of complex energy systems in which a hot water tank is one of many elements of the system. In such a zero-dimensional mathematical model, the hot water tank will be modeled using equations describing heat transfer, and the thermocline itself will be treated as a heat transfer surface with known dimensions and heat transfer coefficient. A novelty of this paper is that it addresses heat loss across the thermocline as defined in this manner. A CFD model of a thermal storage tank is created, validated with available experimental data, and used to obtain the heat transfer coefficient U. The resulting value is then analyzed quantitatively and qualitatively and the changes in the thickness of the thermocline are accounted for in the equation. The results from this groundbreaking work can be used to analyze heat storage in the form of thermocline water tanks at the level of system modeling, e.g., for the purpose of configuring the structure of other devices and control systems. [ABSTRACT FROM AUTHOR]

In order to improve the energy efficiency of the Sabatier reactor-based power-to-gas process, molten carbonate fuel cells and solid oxide electrolyzers were installed instead of a conventional amine CO 2 capture system and a classical alkaline electrolyzer. The plant is a multi-module prototype with a nominal capacity of 50 kW consisting of two SOE-MCFC units. The system was commissioned in 2022. The article describes the theoretical basis. The initial assumptions that were formulated at the stage of preparing for the research investment, as well as the deviations from them that became the result of detailed design were presented. The developed startup and shutdown procedures, as well as the first results of pioneering research were shown. The trial operation of the system was intended to provide information on integrated SOE-MCFC module and its performance and efficiency. The basic barriers for market implementation and recommendations for future research were discussed. The optimal operating point for hydrogen production needed 35.8 kWh/kgH 2. Thus, electrical energy conversion to chemical energy efficiency is 93.9%. Flow preheating and electrical auxiliary heater power are not included. An MCFC at its ideal functioning point (around 4 kW el) outputs 5.4 kg/h of CO 2 separated. • Operational experience of upgraded novel P2G installation is reported. • A start-up procedure of MCFC-SOE tandem in proposed and experimentally verified. • Energy required for synthesis of a kilogram of hydrogen was 35.8 kWh/kgH 2. [ABSTRACT FROM AUTHOR]

This paper presents research on the impact of the material microstructure on the performance of Molten Carbonate Fuel Cells (MCFC). The study is motivated by the need to increase the operation time of MCFC stacks. As the MCFC stacks are mainly composed of porous materials, the paper shows the impact of the porosity on both fuel cell performance and degradation rate. The study is based on the mathematical model, validated through experiments with varying microstructure parameters, achieving an overall relative error of 8%. The study evaluated the performance of MCFC using anodes with different porosity and found that increasing anode porosity from 40% to 70% led to a nearly two-fold increase in maximum power density. However, from both the degradation test and polarization curves, the optimal level of porosity for the anode is around 55%. The porosity level at 55% ensures the highest catalytic surface of the electrodes and is a compromise between the mechanical properties of the electrode and its electrochemical properties. • New approach of 0D model of MCFC including materials microstructure influence is proposed. • The new model is prepared in MS Excel and Aspen HYSYS environments. • Experimental investigation for materials with predefined microstructire parameters was performed for model validation. • Variant analysis is presented for different porosity, tortuosity and constrictivity of MCFC anode. • An optimal scenario is suggested based on modleing results. [ABSTRACT FROM AUTHOR]

This research proposes idea of new kind of high temperature fuel cell – Molten Borate Fuel Cell (MBFC). The idea of new fuel cell is based on technical modification of well-known Molten Carbonate Fuel Cell by changing electrolyte composition to a borate-based mixture. The cell was tested in laboratory conditions as proof-of-concept investigation and reached OCV at around 1 V and 0.05 A/cm2 of current density. The optimization of borate-based electrolyte composition was conducted with a help of ANN and experimentally verified. The deep feedforward artificial neural network (DFF ANN) was proposed in this study to model the behavior of the new Molten Borate Fuel Cell. This modeling approach is well-known as a potent tool for dealing with complicated modeling and prediction tasks. This study presented many network designs for a range of operating circumstances. The ANN has been used to model and optimize the SOFC, MCFC, and PEMFC, but the design and performance of the MBFC were not previously investigated. The innovative type of fuel cells at issue - Molten Borate Fuel Cells - were designed and optimized using a deep learning algorithm. The most advanced model provides a dynamic forecast of fuel cell operation, taking thermal-flow and electrolyte material factors into account. With an average inaccuracy of 0.3%, all the models performed fair enough. An ANN-based technique may also be used to improve cell operating parameters. Moreover, the operating composition of a novel molten borate electrolyte might be improved in terms of electrochemical performance of the fuel cell. • New type of fuel cells is proposed. • Various electrolyte compositions are proposed. • The selected electrolyte composition were tested experimentally. • The Artificial Neural Network is built for tailoring the electrolyte compositions. • New composition is proposed by the ANN. [ABSTRACT FROM AUTHOR]

The paper aims to examine the possibility of improving the manufacturing process for MCFC cathodes. using noble, semi-precious, and rare earth metals sourced from waste electric and electronic equipment (WEEE). As MCFC components are not particularly sensitive to ceramic and metal impurities. The addition of noble metals recovered from WEEE as catalysts are economically justifiable. The reported experimental research revealed the positive impact of MCFC cathode fabricated with 20% recycled electronic scrap. Especially the cell with powder marked as 4/1 enjoyed much better performance operating at 550 °C than the reference cell. During the operation at a temperature of 650 °C, the cell with powder marked as 4/1 has almost the same performance as the reference cell, i.e., 1.01 V OCV and power density of 0.13 A/cm2. The cell with cathode with 4/2 powder has the worst performance – current density of 0.09 A/cm2 and OCV of 0.97 V. [Display omitted] • Rare earth elements separated by positive charge contains less cerium than separated by negative charge. • The maximum current densities and Open Circuit Values are similar as reference case for maximum gas flows. • The maximum current densities and Oper Circuit Voltages are better with additives for lower operational temperature. [ABSTRACT FROM AUTHOR]

The aim of the paper is to simulate multi-tank storage with the thermocline moving from tank to tank and compare the results against single tank storage. No analysis of this nature has previously been performed. The results lend added impetus to developing this new type of thermal energy storage, especially as heat losses through insulation have already been reduced a minimum. Dividing a seasonal thermal energy storage tank into smaller tanks reduces the negative effect of heat transfer through the thermocline. The work is a continuation of the concept already proposed in available literature of using multiple solar energy stores, but we focus mainly on developing a dynamic model of a system of this type and presenting the results of a time and thermocline dependent simulation. The study also encompassed examination of the thickness of thermal insulation of the storage tanks, with definitions of its critical size. Our study revealed that the use of multi-tank thermal energy storage reduces heat loss through the thermocline. This is illustrated mainly by changes in water temperature in the upper part of the tank, which fluctuates across a much smaller range than for a single tank. In the single tank system, the temperature drops below 60 °C, whereas for the multi-tank system it always remains above 64 °C. In addition, in the multi-tank solution the loss caused by the thermocline occurs in only one tank, leaving 3/4 of the storage system unaffected by thermocline loss. • The concept of multi tank seasonal thermal energy storage is examined. • The examination is based on the dynamic modeling. • Results are compared with the single tank thermal energy storage systems. • The examined system is more efficient due thermocline losses limitation. [ABSTRACT FROM AUTHOR]

• BNT (0.94Bi 0.5 Na 0.5 TiO 3 -0.06BaTiO 3) and LNT (La 0.5 Na 0.5 TiO 3) containing alkali element and conducting oxide ion were used for replacing the non-conductive LiAlO 2 matrix in MCFCs (Molten carbonate fuel cells). • Cells fabricated using both new oxides as solid matrix support show state-of-the-art electrochemical performance. • LNT sample has extended life-time and better performance than BNT sample and the good performance may related to enhanced oxygen reduction reaction kinetics. New oxide ion conductors with perovskite structures containing alkali metal were explored for use as solid support materials for MCFCs (molten carbonate fuel cells). The conductivity of two candidates, BNT (0.94Bi 0.5 Na 0.5 TiO 3 -0.06BaTiO 3) and LNT (La 0.5 Na 0.5 TiO 3), in an oxidation atmosphere, were measured and compared. The conductivity measurement of BNT in a reducing atmosphere indicated the reduction of BNT to Bi metal by a sharp change in conductivity. It limited the lifetime of the fuel cell using BNT as solid support. Fuel cell measurements using the alternative perovskite LNT showed excellent stability under fuel cell operation conditions and high-power density compared to conventional MCFC with LiAlO 2 as the solid matrix. The reason for obtaining high electrochemical performance using the LNT matrix is discussed. [ABSTRACT FROM AUTHOR]

It is proposed that dual conductive electrolytes have the potential to improve properties of MCFC by using oxygen ion conductors as matrix material, creating what is termed composite electrolyte. In this work we present the results of testing a novel type of electrolyte of molten carbonate fuel cell which consists of Yttria Stabilized Zirconia impregnated by Lithium/Potassium carbonates. Polarization curves were obtained for temperatures between 500 °C and 800 °C. Without very accurate measurements it is not easy to determine the additional electric charge provided by oxygen ions (O=). We made an attempt to build a mathematical model which takes into account both conductivities and, based on the model, estimated the ratio of electric charge provided by oxygen ions and carbonate ions. • We investigated double conducting electrolytes for Molten Carbonate Fuel Cell. • The investigation was done by both experimental and modeling methods. • We found small infuence done by ionic conductor. • The infunece is so small, that the results are not so evident. [ABSTRACT FROM AUTHOR]

Summary: This article shows the teaching processes of artificial neural networks that are used to model the molten carbonate fuel cell (MCFC). Researchers model MCFCs to address a variety of issues across a range of complexities, from simply gauging the effect of temperature through to a complete model with 14 input parameters. The architecture of the model is a triple layer network with one hidden layer containing three neurons. The activation function used for the hidden layer was a hyperbolic tangent, with the last layer being based on linear function. We produced various network configurations, mostly networks containing one hidden layer. Models map the work of a real fuel cell with an average error in the range of 2.4% to 4.6%. The model we created guided the optimization of the thermal‐flow and construction parameters of the MCFC. Commercially available software was used to build the model and optimize the operating parameters. The selected objective functions were the efficiency of electricity production and the power density obtained from the cell's surface. The results obtained serve as pointers for possible changes in fuel cell operation and could lead to some structural changes being made. [ABSTRACT FROM AUTHOR]

[Display omitted] • Electrolyzer and fuel cell integrated in an enhanced power-to-gas system. • No energy penalty for CO 2 capture, in a system with lower power requirements. • CO 2 separation exceeds 90 percent. This study outlines a concept for improving a power-to-gas (P2G) system through the implementation of highly efficient high-temperature electrolysis combined with a molten carbonate fuel cell (MCFC) as a CO 2 capture unit for a power plant. Laboratory scale experiments demonstrate that the MCFC could be used for CO 2 separation, opening the way to capture of CO 2 from flue gases at coal-fired power stations, while maintaining both high electric efficiency and a high CO 2 separation factor. Improved energy efficiency can be achieved by the lower electricity requirement of high temperature electrolysis compared to other technologies. Results obtained from experimental investigations show that a CO 2 separation rate in excess of 90 % is achievable through adjusting the cathode inlet flow. It should be noted that flue gas must be mixed with air before delivery to the MCFC. Controlled flow of inlet gases to the anode can raise electric efficiency to above 35 % for both laboratory-size and full-scale MCFC. The benefits of the concept are manifested by lower power consumption of the system and no energy penalty for the CO 2 capture process. Additionally, the system enjoys good thermal management because all devices run at elevated temperatures (Sabatier reactor at 300 °C, MCFC at 650 °C, solid oxide electrolyzer at 700–800 °C). The proposed improvements increase the system's competitiveness relative to alternative P2G systems and reduce the price of substitute natural gas. Secondly, it will eliminate the consumption of heat from the host coal-fired power plant. Thirdly, the entire system will be more straightforward, compact, and modular, allowing any future scale-up to be implemented without technological difficulties. Finally, the amount of energy required to produce hydrogen will decline by around 25 %. [ABSTRACT FROM AUTHOR]

Molten Carbonate Fuel Cells (MCFC) offer several advantages that are accelerating the research and development effort. Recent advances include improved materials, new fabrication techniques and new designs, flow configurations and applications. Nevertheless, several factors are holding back large scale implementation of fuel cells, especially in distributed energy generation, a major one being their long response time to changing parameters. Whereas alternative mathematical models of the molten carbonate fuel cell stack have been developed over the last decade, there are no reported analyses of regarding the application of models for emergency scenarios such as fuel cell malfunctions. This paper presents the 0D model of MCFC, calibrated to the appropriate available experimental data. This study investigates a generic molten fuel cell stack with nominal power output of 1 kWel. As daily, weekly and monthly variations in the electrical power load are expected, there is a need to develop numerical tools to predict the unit's performance with high accuracy. Hence, a fully physical dynamic model of an MCFC stack was developed and implemented in Aspen HYSYS 10 modeling software to enable predictive analysis of the dynamic response. The model is used to simulate a number of few malfunctions with 5. 66% broken cells in the stack. Losses of performance are obtained, manifested by rising operating temperature and falling power output. Moreover, a number of emergency operation scenarios were investigated, such as sudden loss of electric load, fuel and oxidiant supply. The presented model exhibits high accuracy and accounts for thermal and electrochemical processes and parameters. The paper presents the methodology used in the study to analyze the sensitivity of key scenarios such as load changes and emergencies. Further functionality of the model, which was validated using real operating data, is discussed. • Dynamic model of a Molten Carbonate Fuel Cell 1 kW stackis proposed. • The model was calibrated to the appropriate available experimental data. • The load changes and emergency situations were examined. [ABSTRACT FROM AUTHOR]