Search

The dynamic shifts in shorelines due to erosion and deposition have become a significant challenge in coastal zone management, particularly in the context of climate change and rising sea levels. This paper evaluates the shoreline protection and efficiency of various wave-reducing breakwaters in the Vietnamese Mekong Delta. The delta exemplifies the coastal erosion issue faced by deltas worldwide. Landsat satellite images were used to establish a coastal development map for the period 2000 to 2022. The wave data in front and behind the breakwaters were analyzed to assess the wave reduction efficiency of various breakwater structures. Our results reveal that coastal erosion is deeply concerning, with almost 40% of the coastline experiencing severe erosion. Hotspot areas have been observed to reach annual erosion rates of nearly 95 m per year. The majority of provinces have adopted protective measures, with 68% of affected shorelines protected to some degree. Our results show breakwaters to be highly effective in reducing wave height, with a 62% reduction in waves reaching the shore. The process of creating offset has taken place in the area from the breakwater back to the mainland, with the rate of increase in compensation also quite fast at up to 3.1 cm/month. The stability of the pile–rock is very high; however, it is necessary to add rock to compensate for the settlement of the rock part. [ABSTRACT FROM AUTHOR]

The design capability, strength, and structural rigidity provided by tube hydroforming (THF) are successfully used in many applications to produce high-strength parts and assemblies with improved mechanical properties, optimized service life, and weight features. In tubular metal forming, output parameters such as branch height, distribution of tube wall material thickness, distribution of damage factor, metal flow, effective stress, and effective strain significantly affect the quality of the product after the forming process. Therefore, this paper aims to evaluate the manufacturing quality of Y-shape joints from AISI304 material steel tube through output parameters of THF process with and without counter punch force on numerical simulation base. The Finite Element Method (FEM) has become an established feature of metal forming technology. The objective of FEM is to replace costly and elaborate experimental testing with fast, low-cost computer simulation. The simulation study uses finite element method-based virtual prototyping techniques to characterize output parameters, gain insight into strain mechanics, and predict mechanical properties of shaped components. The research results are presented clearly and unambiguously through the evaluation of 7 criteria to compare the quality of the specimens hydroformed by two surveyed cases and optimize the crucial input process parameters. And these data can be applied in experiments, more efficient product and process design, calculation, and control of input parameters avoiding costly trial and error in industrial production. The findings can help technologists optimize process parameters in the hydroforming process of products with protrusion from a tubular blank. [ABSTRACT FROM AUTHOR]