Search

Traditional bioreactor systems involve the use of three-dimensional (3D) scaffolds or stem cell aggregates, limiting the accessibility to the production of cell-secreted biomolecules. Herein, we present the use a pulse electromagnetic fields (pEMFs)-assisted wave-motion bioreactor system for the dynamic and scalable culture of human bone marrow-derived mesenchymal stem cells (hBMSCs) with enhanced the secretion of various soluble factors with massive therapeutic potential. The present study investigated the influence of dynamic pEMF (D-pEMF) on the kinetic of hBMSCs. A 30-min exposure of pEMF (10V-1Hz, 5.82 G) with 35 oscillations per minute (OPM) rocking speed can induce the proliferation (1 × 10 5  → 4.5 × 10 5 ) of hBMSCs than static culture. Furthermore, the culture of hBMSCs in osteo-induction media revealed a greater enhancement of osteogenic transcription factors under the D-pEMF condition, suggesting that D-pEMF addition significantly boosted hBMSCs osteogenesis. Additionally, the RNA sequencing data revealed a significant shift in various osteogenic and signaling genes in the D-pEMF group, further suggesting their osteogenic capabilities. In this research, we demonstrated that the combined effect of wave and pEMF stimulation on hBMSCs allows rapid proliferation and induces osteogenic properties in the cells. Moreover, our study revealed that D-pEMF stimuli also induce ROS-scavenging properties in the cultured cells. This study also revealed a bioactive and cost-effective approach that enables the use of cells without using any expensive materials and avoids the possible risks associated with them post-implantation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Nanocelluloses have garnered significant attention recently in the attempt to create sustainable, improved functional materials. Nanocellulose possesses wide varieties, including rod-shaped crystalline cellulose nanocrystals and elongated cellulose nanofibers, also known as microfibrillated cellulose. In recent times, nanocellulose has sparked research into a wide range of biomedical applications, which vary from developing 3D printed hydrogel to preparing structures with tunable characteristics. Owing to its multifunctional properties, different categories of nanocellulose, such as cellulose nanocrystals, cellulose nanofibers, and bacterial nanocellulose, as well as their unique properties are discussed here. Here, different methods of nanocellulose-based hydrogel preparation are covered, which include 3D printing and crosslinking methods. Subsequently, advanced nanocellulose-hydrogels addressing conductivity, shape memory, adhesion, and structural color are highlighted. Finally, the application of nanocellulose-based hydrogel in biomedical applications is explored here. In summary, numerous perspectives on novel approaches based on nanocellulose-based research are presented here., (© 2024 Wiley‐VCH GmbH.)

Biomaterial composition and surface charge play a critical role in macrophage polarization, providing a molecular cue for immunomodulation and tissue regeneration. In this study, we developed bifunctional hydrogel inks for accelerating M2 macrophage polarization and exosome (Exo) cultivation for wound healing applications. For this, we first fabricated polyamine-modified three-dimensional (3D) printable hydrogels consisting of alginate/gelatin/polydopamine nanospheres (AG/NSPs) to boost M2-exosome (M2-Exo) secretion. The cultivated M2-Exo were finally encapsulated into a biocompatible collagen/decellularized extracellular matrix (COL@d-ECM) bioink for studying angiogenesis and in vivo wound healing study. Our findings show that 3D-printed AGP hydrogel promoted M2 macrophage polarization by Janus kinase/signal transducer of activation (JAK/STAT), peroxisome proliferator-activated receptor (PPAR) signaling pathways and facilitated the M2-Exo secretion. Moreover, the COL@d-ECM/M2-Exo was found to be biocompatible with skin cells. Transcriptomic (RNA-Seq) and real-time PCR (qRT-PCR) study revealed that co-culture of fibroblast/keratinocyte/stem cells/endothelial cells in a 3D bioprinted COL@d-ECM/M2-Exo hydrogel upregulated the skin-associated signature biomarkers through various regulatory pathways during epidermis remodeling and downregulated the mitogen-activated protein kinase (MAPK) signaling pathway after 7 days. In a subcutaneous wound model, the 3D bioprinted COL@d-ECM/M2-Exo hydrogel displayed robust wound remodeling and hair follicle (HF) induction while reducing canonical pro-inflammatory activation after 14 days, presenting a viable therapeutic strategy for skin-related disorders., Competing Interests: The authors declare no completing financial interests., (© 2024 The Authors.)

Rapid regeneration of the injured tissue or organs is necessary to achieve the usual functionalities of the damaged parts. However, bacterial infections delay the regeneration process, a severe challenge in the personalized healthcare sector. To overcome these challenges, 3D-printable multifunctional hydrogels of Zn/tannic acid-reinforced glycol functionalized chitosan for rapid wound healing were developed. Polyphenol strengthened intermolecular connections, while glutaraldehyde stabilized 3D-printed structures. The hydrogel exhibited enhanced viscoelasticity (G'; 1.96 × 10 4  Pa) and adhesiveness (210 kPa). The dual-crosslinked scaffolds showed remarkable antibacterial activity against Bacillus subtilis (∼81 %) and Escherichia coli (92.75 %). The hydrogels showed no adverse effects on human dermal fibroblasts (HDFs) and macrophages (RAW 264.7), indicating their superior biocompatibility. The Zn/TA-reinforced hydrogels accelerate M2 polarization of macrophages through the activation of anti-inflammatory transcription factors (Arg-1, VEGF, CD163, and IL-10), suggesting better immunomodulatory effects, which is favorable for rapid wound regeneration. Higher collagen deposition and rapid re-epithelialization occurred in scaffold-treated rat groups vis-à-vis controls, demonstrating superior wound healing. Taken together, the developed multifunctional hydrogels have great potential for rapidly regenerating bacteria-infected wounds in the personalized healthcare sector., Competing Interests: Declaration of competing interest The authors declare that no conflicts of financial interests or personal relationships have influenced the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Dialdehyde cellulose nanofibrils (DACNF) and Polyquaternium-10 (PQ: chloro-2-hydroxy-3-(trimethylamino) propyl polyethylene glycol cellulose) have become increasingly favored as antibacterial substances due to their advantageous characteristics. DACNF exhibits exceptional mechanical properties and biocompatibility, whereas PQ demonstrates a positive charge that enhances its antibacterial activity. Combined in a DACNF/PQ mixture, they provide an excellent template material for preparing and stabilizing ultra-fine (~ 10.3 nm) silver nanoparticles (AgNPs) at room temperature. Here, the dialdehyde group of DACNF functions as a reducing agent, while the quaternary ammonium of PQ and carboxylate groups of DACNF synergistically helped in-situ generation of AgNPs uniformly. The synthesized nanocomposites, namely PQ@AgNPs, AgNPs@DACNF, and AgNPs@DACNF/PQ, were subjected to comprehensive characterization using various advanced analytical techniques. The films containing AgNPs@DACNF and AgNPs@DACNF/PQ, fabricated via vacuum filtration, exhibited excellent mechanical properties of 9.78 ± 0.21 MPa, and demonstrated superior antibacterial activity against both Escherichia coli and Staphylococcus aureus. Additionally, the silver ion leaching from the prepared composite films was well controlled. The fabricated nanocomposites also effectively inhibited bacterial biofilm formation. It was also found to be highly biocompatible and non-toxic to human skin fibroblast cells. Furthermore, the nanocomposites exhibited enhanced migration of human dermal fibroblasts, suggesting their potential in facilitating wound healing processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Macrophages play an essential role in immunotherapy and tissue regeneration owing to their remarkable plasticity and diverse functions. Recent bioengineering developments have focused on using external physical stimuli such as electric and magnetic fields, temperature, and compressive stress, among others, on micro/nanostructures to induce macrophage polarization, thereby increasing their therapeutic potential. However, it is difficult to find a concise review of the interaction between physical stimuli, advanced micro/nanostructures, and macrophage polarization. This review examines the present research on physical stimuli-induced macrophage polarization on micro/nanoplatforms, emphasizing the synergistic role of fabricated structure and stimulation for advanced immunotherapy and tissue regeneration. A concise overview of the research advancements investigating the impact of physical stimuli, including electric fields, magnetic fields, compressive forces, fluid shear stress, photothermal stimuli, and multiple stimulations on the polarization of macrophages within complex engineered structures, is provided. The prospective implications of these strategies in regenerative medicine and immunotherapeutic approaches are highlighted. This review will aid in creating stimuli-responsive platforms for immunomodulation and tissue regeneration., (© 2024 The Authors. Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

p -Nitrophenol ( p -NP) is known as a common contaminant found in wastewater, agricultural runoff, and industrial effluents which can degrade water quality and cause potential carcinogenic and toxic effects on the human body. Its detection is essential for public health, industrial safety, environmental protection, and regulatory compliance, underscoring its broad applicability. In this study, a novel electrochemical sensor based on polypyrrole (PPy) flowers assembled via nanotubes was developed for the sensitive determination of p -NP. The nickel (Ni) foam modified with PPy flowers functioned as the working electrode and showed selectivity toward p -NP in a phosphate buffer medium at pH 7.0. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques were utilized for the sensitive determination of p -NP. Under the optimum conditions, the peak currents of DPV versus the concentrations of p -NP in the range of 0.01-20 nM showed a good linear relationship ( R 2 = 0.9943), and the limit of detection (LOD) was calculated to be 7.18 pM (signal-to-noise ratio of 3, S/N = 3). The fabricated electrochemical p -NP sensor exhibited high sensitivity, a low detection limit, and a low response time. The recoveries of p -NP in real samples of groundwater and tap water using the PPy Fls/Ni foam electrode were in the range of 91.0-108.4% with a relative standard deviation (RSD) in the range of 6.65%. Consequently, the PPy Fls/Ni foam electrode could be applied as a rapid, precise, and sensitive electrochemical sensor platform for aqueous p -NP quantification and determination.

3D printing and electrospinning are versatile techniques employed to produce 3D structures, such as scaffolds and ultrathin fibers, facilitating the creation of a cellular microenvironment in vitro. These two approaches operate on distinct working principles and utilize different polymeric materials to generate the desired structure. This review provides an extensive overview of these techniques and their potential roles in biomedical applications. Despite their potential role in fabricating complex structures, each technique has its own limitations. Electrospun fibers may have ambiguous geometry, while 3D-printed constructs may exhibit poor resolution with limited mechanical complexity. Consequently, the integration of electrospinning and 3D-printing methods may be explored to maximize the benefits and overcome the individual limitations of these techniques. This review highlights recent advancements in combined techniques for generating structures with controlled porosities on the micro-nano scale, leading to improved mechanical structural integrity. Collectively, these techniques also allow the fabrication of nature-inspired structures, contributing to a paradigm shift in research and technology. Finally, the review concludes by examining the advantages, disadvantages, and future outlooks of existing technologies in addressing challenges and exploring potential opportunities., (© 2024 Wiley‐VCH GmbH.)

Objective: The purpose of this research is to compare the effects of post placement-immediate and delayed-on the periapical area's capacity to close after root canal therapy., Techniques: A random split of 60 recently removed human single-rooted teeth were made into two groups: Group A received immediate post placement, whereas Group B received post placement after seven days. Standard guidelines were followed in the preparation of root canals and the placement of posts. A dye penetration method was used to measure microleakage, a measure of sealing capacity., Findings: Compared to the immediate post-placement group (0.62 ± 0.08) ( P < 0.001), the delayed post-placement group had a considerably lower mean microleakage score (0.35 ± 0.06), showing improved sealing capacity. In conclusion, post implantation done later enhances the periapical area's sealing capacity after root canal therapy. This research underscores the significance of scheduling endodontic treatments to maximize treatment success and improve tooth retention, as well as the possible therapeutic advantages of postponing post implantation., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Pharmacy and Bioallied Sciences.)

Background: Endodontic retreatment is crucial for preserving dental health but is influenced by various factors., Objective: This research aimed to assess factors affecting the success of endodontic retreatment procedures., Methods: A retrospective analysis was conducted on 250 cases of endodontic retreatment. Demographic and clinical data were collected, and treatment success was defined based on predetermined criteria. Statistical analysis was performed to evaluate associations between treatment factors and retreatment outcomes., Results: The overall success rate was 75%. Rotary instrumentation, gutta-percha obturation, and use of intracanal medication were significantly associated with higher retreatment success rates ( P < 0.05)., Conclusion: Factors such as instrumentation type, obturation material, and intracanal medication significantly influence endodontic retreatment success. Understanding and optimizing these factors are crucial for improving treatment outcomes and patient satisfaction., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Pharmacy and Bioallied Sciences.)

Photosensitizing agents have received increased attention from the medical community, owing to their higher photothermal efficiency, induction of hyperthermia, and sustained delivery of bioactive molecules to their targets. Micro/nanorobots can be used as ideal photosensitizing agents by utilizing various physical stimuli for the targeted killing of pathogens (e.g., bacteria) and cancer cells. Herein, we report sunflower-pollen-inspired spiky zinc oxide (s-ZnO)-based nanorobots that effectively kill bacteria and cancer cells under near-infrared (NIR) light irradiation. The as-fabricated s-ZnO was modified with a catechol-containing photothermal agent, polydopamine (PDA), to improve its NIR-responsive properties, followed by the addition of antimicrobial (e.g., tetracycline/TCN) and anticancer (e.g., doxorubicin/DOX) drugs. The fabricated s-ZnO/PDA@Drug nanobots exhibited unique locomotory behavior with an average speed ranging from 13 to 14 μm/s under 2.0 W/cm 2 NIR light irradiation. Moreover, the s-ZnO/PDA@TCN nanobots exhibited superior antibacterial activity against E. coli and S. epidermidis under NIR irradiation. The s-ZnO/PDA@DOX nanobots also displayed sufficient reactive oxygen species (ROS) amplification in B16F10 melanoma cells and induced apoptosis under NIR light, indicating their therapeutic efficacy. We hope the sunflower pollen-inspired s-ZnO nanorobots have tremendous potential in biomedical engineering from the phototherapy perspective, with the hope to reduce pathogen infections.

The skin serves as the body's outermost barrier and is the largest organ, providing protection not only to the body but also to various internal organs. Owing to continuous exposure to various external factors, it is susceptible to damage that can range from simple to severe, including serious types of wounds such as burns or chronic wounds. Macrophages play a crucial role in the entire wound-healing process and contribute significantly to skin regeneration. Initially, M1 macrophages infiltrate to phagocytose bacteria, debris, and dead cells in fresh wounds. As tissue repair is activated, M2 macrophages are promoted, reducing inflammation and facilitating restoration of the dermis and epidermis to regenerate the tissue. This suggests that extracellular matrix (ECM) promotes cell adhesion, proliferation, migrationand macrophage polarization. Among the numerous strategies, electrospinning is a versatile technique for obtaining ECM-mimicking structures with anisotropic and isotropic topologies of micro/nanofibers. Various electrospun biomaterials influence macrophage polarization based on their isotropic or anisotropic topologies. Moreover, these fibers possess a high surface-area-to-volume ratio, promoting the effective exchange of vital nutrients and oxygen, which are crucial for cell viability and tissue regeneration. Micro/nanofibers with diverse physical and chemical properties can be tailored to polarize macrophages toward skin regeneration and wound healing, depending on specific requirements. This review describes the significance of micro/nanostructures for activating macrophages and promoting wound healing., (© 2024 Wiley‐VCH GmbH.)

One of the frontier research areas in the field of gas sensing is high-performance room temperature-based novel sensing materials, and new family of low-cost and eco-friendly carbon nanomaterials with a unique structure has attracted significant attention. In this work, we propose a novel low-cost flexible room temperature ammonia gas sensor based on nitrogen-doped carbon nano-onions/polypyrrole (NCNO-PPy) composite material mounted low-cost membrane substrate was synthesized by combining hydrothermal and in-situ chemical polymerization methods. The proposed flexible sensor revealed high sensing performance when employed as the sensing material for ammonia detection at room temperature. The NCNO-PPy ammonia sensor exhibited 17.32% response for 100 ppm ammonia concentration with a low response time of 26 s. The NCNO-PPy based flexible sensor displays high selectivity, good repeatability, and long-term durability with 1 ppm as the lower detection limit. The proposed flexible sensor also demonstrated remarkable mechanical robustness under extreme bending conditions, i.e., up to 90° bending angle and 500 bending cycles. This enhanced sensing performance can be related to the potential bonding and synergistic interaction between nitrogen-doped CNOs and PPy, the formation of defects from nitrogen doping, and the presence of high reactive sites on the surface of NCNO-PPy composites. Additionally, the computational study was performed on optimized NCNO-PPy nanocomposite for both with and without NH 3 interaction. A deeper understanding of the sensing phenomena was proposed by the computation of several electronic characteristics, such as band gap, electron affinity, and ionization potential, for the optimized composite., (© 2024. The Author(s).)

Developing multifunctional hydrogels for wearable strain sensors has received significant attention due to their diverse applications, including human motion detection, personalized healthcare, soft robotics, and human-machine interfaces. However, integrating the required characteristics into one component remains challenging. To overcome these limitations, we synthesized multifunctional hydrogels using carboxymethyl chitosan (CMCS) and unzipped carbon nanotubes (f-CNTs) as strain sensor via a one-pot strategy. The polar groups in CMCS and f-CNTs enhance the properties of the hydrogels through different interactions. The hydrogels show superior printability with a uniformity factor (U) of 0.996 ± 0.049, close to 1. The f-CNTs-assisted hydrogels showed improved storage modulus (8.8 × 10 5  Pa) than the pure polymer hydrogel. The hydrogels adequately adhered to different surfaces, including human skin, plastic, plastic/glass interfaces, and printed polymers. The hydrogels demonstrated rapid self-healing and good conductivity. The biocompatibility of the hydrogels was assessed using human fibroblast cells. No adverse effects were observed with hydrogels, showing their biocompatibility. Furthermore, hydrogels exhibited antibacterial potential against Escherichia coli. The developed hydrogel exhibited unidirectional motion and complex letter recognition potential with a strain sensitivity of 2.4 at 210 % strain. The developed hydrogels could explore developing wearable electronic devices for detecting human motion., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Nanocellulose-based tissue adhesives show promise for achieving rapid hemostasis and effective wound healing. Conventional methods, such as sutures and staples, have limitations, prompting the exploration of bioadhesives for direct wound adhesion and minimal tissue damage. Nanocellulose, a hydrolysis product of cellulose, exhibits superior biocompatibility and multifunctional properties, gaining interest as a base material for bioadhesive development. This study explores the potential of nanocellulose-based adhesives for hemostasis and wound healing using 3D printing techniques. Nanocellulose enables the creation of biodegradable adhesives with minimal adverse effects and opens avenues for advanced wound healing and complex tissue regeneration, such as skin, blood vessels, lungs, cartilage, and muscle. This study reviews recent trends in various nanocellulose-based 3D printed hydrogel patches for tissue engineering applications. The review also introduces various types of nanocellulose and their synthesis, surface modification, and bioadhesive fabrication techniques via 3D printing for smart wound healing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Introduction: Permanent pacemaker implantation (PPI) in neonates is challenging with respect to indications, device selection, implantation technique, and long-term outcomes. Complex anatomy, the need for long-term pacing with high rates, and a problematic postoperative period are the major problems., Methods: We prospectively followed up 22 newborns who underwent PPI below 28 days of life at our institute., Results: The median age at implantation was 2 days (interquartile range 1-9 days), and 9% were born preterm. The average heart rate before implantation was 46.4 ± 7.2 bpm. Maternal lupus antibodies were positive in 8 (36.4%) neonates, whereas 11 (50.0%) had associated congenital heart disease. Nineteen neonates underwent single chamber (VVI) and three underwent dual chamber (DDD) pacemaker implantation. Over a median follow-up of 46 months (range 2-123 months), the average ventricular pacing percentage was 87.5 ± 24.9%, with a stable pacing threshold. Seven children underwent pulse generator replacement due to battery depletion at a median age of 47 months. Pacing-induced ventricular dysfunction was seen in five children at a median age of 23.6 months, and two underwent upgradation to cardiac resynchronization therapy. Overall mortality was 13.6%, all due to tissue hypoperfusion and lactic acidosis in the postimplantation period., Conclusions: PPI in neonates has a favorable outcome with excellent lead survival. Overall mortality is 13.6%, which is predominantly in the postimplantation period and related to myocardial dysfunction., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Annals of Pediatric Cardiology.)

The traditional rice genotypes of Assam are considered to have biological value due to the presence of several bioactive compounds like flavonoids, polyphenols, and anthocyanins, which have antioxidant, anti-cancer, anti-diabetic, and anti-aging properties. The pigmented genotypes are considered to have high iron (Fe) content. However, the effect of Fe and Zinc (Zn) accumulation on anthocyanin content is yet to be studied in pigmented rice of Assam. We studied the Fe, Zn, and anthocyanin content in grains of 204 traditional rice of Assam, which are traditionally preferred for their nutraceutical properties. We performed phenotypic and biochemical compositional analyses of 204 genotypes to identify those having high Fe, Zn, and anthocyanin. We also carried out the differential expression of a few selected Fe and Zn transporter genes along with the expression of anthocyanin biosynthesis genes. Interestingly, all pigmented rice genotypes contained a higher amount of phenolic compound than the non-pigmented form of rice. We found the highest (32.73 g) seed yield per plant for genotype Jengoni followed by Kajoli chokuwa and Khau Pakhi 1. We also listed 30 genotypes having high levels of Fe and Zn content. The genotype Jengoni accumulated the highest (186.9 μg g -1 ) Fe, while the highest Zn (119.9 μg g -1 ) content was measured in genotype Bora (Nagaon), The levels of Ferritin 2 gene expression were found to be significantly higher in Bora (Nagaon) (> 2-fold). For Zn accumulation, the genotype DRR Dhan-45, which was released as a high Zn content variety, showed significant up-regulation of the ZIP4 gene at booting (> 7-fold), post-anthesis (7.8-fold) and grain filling (> 5-fold) stages followed by Bora (Nagaon) (> 3-fold) at post-anthesis. Anthocyanidin synthase gene, Flavanone 3-dioxygenase 1-like (FDO1), and Chalcone-flavanone isomerase-like genes were up-regulated in highly pigmented genotype Bora (Nagaon) followed by Jengoni. Based on our data there was no significant correlation between iron and zinc content on the accumulation of anthocyanin. This challenges the present perception of the higher nutritive value in terms of the micronutrient content of the colored rice of Assam. This is the first report on the detailed characterization of traditional rice genotypes inclusive of phenotypic, biochemical, nutritional, and molecular attributes, which would be useful for designing the breeding program to improve Fe, Zn, or anthocyanin content in rice., (© 2024. The Author(s).)

Introduction: Indirect composite restoration is one of the commonly followed procedures in the posterior teeth. The success of this is dependent on many factors, one being the luting cement. Hence, the current study explores the microleakage of the two luting cements at 2 different times., Materials and Methods: Eighty extracted human teeth were taken, and class II cavities were made that were to receive the composite inlays. They were grouped as supragingival and subgingival, which for further divided as were further subdivided to be observed for marginal leakage at cervical and occlusal margins, at the end of a day and 1 month. Each group had ten specimens. The luting cements that were evaluated were Variolink N and RelyX Unicem. After the composite inlay restoration was done for all the specimens, the sections were put on slides, and a stereomicroscope was used to measure the amount of dye penetration. Leakage was evaluated and compared using Mann-Whitney U test., Results: At the end of 1 day, there was no significant alteration in the microleakage in the occlusal or cervical regions for either region supragingivally or subgingivally between the two luting cements. Significant difference between the two cements at the cervical borders at the end of a month was seen for both the margins. When compared supragingivally and subgingivally at the end of 1 day or at the end of 1 month, there was not a significant difference for any of the cements., Conclusion: Within the constraints of the current investigation, it can be said that there was similar microleakage for both Variolink N and RelyX Unicem at the conclusion of a day's storage time. After a 1-month storage period, RelyX Unicem showed more cervical microleakage than Variolink N., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Pharmacy and Bioallied Sciences.)

Introduction: To identify gender-based differences in pulpal sensory thresholds in human teeth utilizing various conducting media., Materials and Methods: The study involved 50 participants of both genders equally distributed. The maxillary central incisors were the teeth selected for the intervention. The three conducting media that were put to the test were Colgate Sensitive Pro-Relief Enamel Repair Toothpaste (CS), Himalaya herbals sensitivity toothpaste (HS), and Lignox 2% gel (LG). Subject's sensory threshold readings as well as the Visual analogue scale (VAS) scores were noted at the tiniest sensation they experienced. Following an ANOVA, a post hoc analysis was performed to confirm the significance between the three media., Results: Lox 2% Jelly significantly reduced sensory threshold values compared to the other conducting media ( P < 0.001). Comparing the sensory threshold values of the sexes showed that men have greater values. Male and female readings differed significantly in the Lox 2% Jelly group ( P = 0.021), whereas Colgate Sensitive Pro-Relief Enamel Repair Toothpaste, Himalaya herbals sensitivity toothpaste ( P < 0.001) groups showed highly significant variances. All the three conducting media had a highly significant variance for the VAS scores. ( P < 0.001)., Conclusion: The conducting material used and gender affect the pulpal sensory thresholds to electric impulses produced by EPT., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Pharmacy and Bioallied Sciences.)

Introduction: The application of the antioxidants after the teeth are bleached has been advocated to fasten the restorative process post-bleaching. The motive of this study was to examine and assess the micro-tensile binding strength of bleached enamel to the resin using a variety of antioxidant solutions. Finding the reason for the tooth fracture was the secondary outcome measured., Materials and Methods: An in vitro study was planned with 100 human extracted teeth, with 20 in each group with one as controls and 4 others tested for the antioxidants sodium ascorbate, epigallocatechin gallate, chitosan, and proanthocyanidin application. The bond strength of bleached enamel to the resin was well as the failure type was assessed after the values were noted and compared using the ANOVA and Tukey's methods keeping P < 0.05 as significant., Results: Epigallocatechin gallate specimens displayed the maximum micro-tensile bond strength under the investigational circumstances, whereas controls displayed the lowest micro-tensile bond strength. There was statistical alteration in micro-tensile bond strengths between all the groups except between epigallocatechin gallate vs chitosan and sodium ascorbate vs proanthocyanidin. High statistical significance was seen between the control and the antioxidant groups as well as between sodium ascorbate and epigallocatechin gallate and chitosan., Conclusion: The antioxidant chemicals significantly augmented the bond strength of bleached enamel to the resin that had been bleached. Also, when compared to the other experimental groups, epigallocatechin gallate and chitosan treatment displayed the greatest mean bond strength values., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Journal of Pharmacy and Bioallied Sciences.)

Conductive hydrogels (CHs) are promising alternatives for electrical stimulation of cells and tissues in biomedical engineering. Wound healing and immunomodulation are complex processes that involve multiple cell types and signaling pathways. 3D printable conductive hydrogels have emerged as an innovative approach to promote wound healing and modulate immune responses. CHs can facilitate electrical and mechanical stimuli, which can be beneficial for altering cellular metabolism and enhancing the efficiency of the delivery of therapeutic molecules. This review summarizes the recent advances in 3D printable conductive hydrogels for wound healing and their effect on macrophage polarization. This report also discusses the properties of various conductive materials that can be used to fabricate hydrogels to stimulate immune responses. Furthermore, this review highlights the challenges and limitations of using 3D printable CHs for future material discovery. Overall, 3D printable conductive hydrogels hold excellent potential for accelerating wound healing and immune responses, which can lead to the development of new therapeutic strategies for skin and immune-related diseases., (© 2023 Wiley-VCH GmbH.)

Bone hemorrhage, infection, and large bone defects following surgical treatment of traumatic bone injury have raised potential concerns, underscoring the urgent need to develop multifunctional therapeutic platforms that can effectively address traumatic bone regeneration. Advancements in three-dimensional (3D) printing technology have propelled the development of several engineering disciplines, such as tissue engineering. Nevertheless, 3D-printed frameworks with conventional materials often lack multifunctional capabilities to promote specific activities for diverse regeneration purposes. In this study, we developed a highly oxidized two-dimensional (2D) graphitic carbon nitride (Ox-gCN) as a nano-photocatalyst to reinforce alginate/gelatin (ALG)-based hydrogel scaffolds (ALG/CN) to achieve an anti-inflammatory and osteo-immunomodulatory niche with superior hemostatic ability for traumatic bone injury repair. Sulfuric acid oxidation enhances the oxygen-containing functional groups of the g-CN surface and promotes cell adhesion and differentiation of human bone marrow-derived mesenchymal stem cells (hBMSCs) in vitro. Moreover, the excellent visible light-activated photocatalytic characteristics of the ALG/CN scaffold were used in antibacterial studies. In addition, the ALG/CN bio/nanocomposite scaffold facilitates M2 polarization of macrophages than did pristine ALG scaffolds. Furthermore, ALG/CN scaffold induced hBMSCs differentiation by upregulating ERK and MAPKs phosphorylation during osteo-immunomodulation. In a rat calvaria defect model, the fabricated ALG/CN scaffolds induced new bone formation through collagen deposition and activation of osteocalcin proteins without inflammation in vivo. These results highlight the potential of 3D-printed functionalized 2D carbon nitrides in regulating the bone immune microenvironment, which may be beneficial for developing advanced tissue constructs, especially for traumatic bone regeneration in clinical settings., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Dynamic tracking of cell migration during tissue regeneration remains challenging owing to imaging techniques that require sophisticated devices, are often lethal to healthy tissues. Herein, we developed a 3D printable non-invasive polymeric hydrogel based on 2,2,6,6-(tetramethylpiperidin-1-yl) oxyl (TEMPO)-oxidized nanocellulose (T-CNCs) and carbon dots (CDs) for the dynamic tracking of cells. The as-prepared T-CNC@CDs were used to fabricate a liquid bio-resin containing gelatin methacryloyl (GelMA) and polyethylene glycol diacrylate (GPCD) for digital light processing (DLP) bioprinting. The shear-thinning properties of the GPCD bio-resin were further improved by the addition of T-CNC@CDs, allowing high-resolution 3D printing and bioprinting of human cells with higher cytocompatibility (viability ∼95 %). The elastic modulus of the printed GPCD hydrogel was found to be ∼13 ± 4.2 kPa, which is ideal for soft tissue engineering. The as-fabricated hydrogel scaffold exhibited tunable structural color property owing to the addition of T-CNC@CDs. Owing to the unique fluorescent property of T-CNC@CDs, the human skin cells could be tracked within the GPCD hydrogel up to 30 days post-printing. Therefore, we anticipate that GPCD bio-resin can be used for 3D bioprinting with high structural stability, dynamic tractability, and tunable mechanical stiffness for image-guided tissue regeneration., Competing Interests: Declaration of competing interest The authors declare no competing financial interests., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

We report an unusual spin-direction-spin coupling phenomenon of light using the leaky quasiguided modes of a waveguided plasmonic crystal. This is demonstrated as simultaneous input spin-dependent directional guiding of waves (spin-direction coupling) and wave-vector-dependent spin acquisition (direction-spin coupling) of the scattered light. These effects, manifested as the forward and the inverse spin Hall effect of light in the far field, and other accompanying spin-orbit interaction effects are observed and analyzed using a momentum (k) domain polarization Mueller matrix. Resonance-enabled enhancement of these effects is also demonstrated by utilizing the spectral Fano resonance of the hybridized modes. The fundamental origin and the unconventional manifestation of the spin-direction-spin coupling phenomenon from a relatively simple system, ability to probe and interpret the resulting spin-orbit phenomena in the far field through momentum-domain polarization analysis, and their regulated control in plasmonic-photonic crystals open up exciting avenues in spin-orbit-photonic research.

Objectives: The aim of this study was to evaluate the quality of life (QOL) of children who underwent the arterial switch operation (ASO) for Transposition of Great Arteries in our population and, specifically, to explore early modifiable factors and the influence of parental and socioeconomic factors on the QOL of these children., Methods: Cross-sectional study using Paediatric Quality of Life Inventory™ 3.0 Cardiac Module was carried out on 3- to 12-year-old children who had undergone ASO between the years 2012-2018. Socioeconomic status was calculated using the modified Kuppuswamy scale (2019). Other clinical factors with possible bearing on the outcome were also analysed., Results: Immediate survival after surgery was 196 out of 208 (94.2%) with an attrition of 19 patients (9.6%) over the follow-up period. Most surviving children (98.9%) had started formal schooling in age-appropriate classes. Two children had severe neuromotor impairment. The median cumulative health-related QOL score of the children was 97.9 (interquartile range 4.2) at 5.6 ± 1.27 years of life. The median scores each of the health-related QOL parameters, viz, heart problem symptoms, treatment compliance, perceived physical appearance, treatment-related anxiety, cognitive problems, and communication was 100 with negative skewing., Conclusions: Excellent QOL was observed in most children after ASO with the median total paediatric QOL scores in all domains of 97.9. Social factors did not show a statistically significant influence on the QOL parameters in the current cohort. The gradually declining trend across the age groups emphasizes the need for continued follow-up for early identification of possible correctable factors and initiating intervention to ensure good QOL into teenage and adulthood., (© The Author(s) 2023. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.)

Recent studies indicate that mitochondrial dysfunctions and DNA damage have a critical influence on cell survival, which is considered one of the therapeutic targets for cancer therapy. In this study, we demonstrated a comparative study of the effect of polyphenolic carbon quantum dots (CQDs) on in vitro and in vivo antitumor efficacy. Dual emissive (green and yellow) shape specific polyphenolic CQDs (G-CQDs and Y-CQDs) were synthesized from easily available nontoxic precursors (phloroglucinol), and the antitumor property of the as-synthesized probe was investigated as compared to round-shaped blue emissive CQDs (B-CQDs) derived from well-reported precursor citric acid and urea. The B-CQDs had a nuclei-targeting property, and G-CQDs and Y-CQDs had mitochondria-targeting properties. We have found that the polyphenol containing CQDs (at a dose of 100 μg mL -1 ) specifically attack mitochondria by excess accumulation, altering the metabolism, inhibiting branching pattern, imbalanced Bax / Bcl-2 homeostasis, and ultimately generating oxidative stress levels, leading to oxidative stress-induced cell death in cancer cells in vitro. We show that G-CQDs are the main cause of oxidative stress in cancer cells because of their ability to produce sufficient • OH - and 1 O 2 radicals, evidenced by electron paramagnetic resonance spectroscopy and a terephthalic acid test. Moreover, the near-infrared absorption properties of the CQDs were exhibited in two-photon (TP) emission, which was utilized for TP cellular imaging of cancer cells without photobleaching. The in vivo antitumor test further discloses that intratumoral injection of G-CQDs can significantly augment the treatment efficacy of subcutaneous tumors without any adverse effects on BalB/c nude mice. We believe that shape-specific polyphenolic CQD-based nanotheranostic agents have a potential role in tumor therapy, thus proving an insight on treatment of malignant cancers.

Electroactive polymer-metal composites (EAPMCs) have gained significant attention in tissue engineering owing to their exceptional mechanical and electrical properties. EAPMCs develop by combining an electroactive polymer matrix and a conductive metal. The design considerations include choosing an appropriate metal that provides mechanical strength and electrical conductivity and selecting an electroactive polymer that displays biocompatibility and electrical responsiveness. Interface engineering and surface modification techniques are also crucial for enhancing the adhesion and biocompatibility of composites. The potential of EAPMC-based tissue engineering revolves around its ability to promote cellular responses, such as cell adhesion, proliferation, and differentiation, through electrical stimulation. The electrical properties of these composites can be used to mimic natural electrical signals within tissues and organs, thereby aiding tissue regeneration. Furthermore, the mechanical characteristics of the metallic components provide structural reinforcement and can be modified to align with the distinct demands of various tissues. EAPMCs have extraordinary potential as regenerative biomaterials owing to their ability to promote beneficial effects in numerous electrically responsive cells. This study emphasizes the characteristics and applications of EAPMCs in tissue engineering.

Objectives: The objectives of this study were to: (1) assess the frequency of missed canals in the mesiobuccal root (MB) of endodontically treated maxillary molars and its association with apical periodontitis (AP); (2) examine the correlation between the presence of a confluent or separate missed MB2 canal and the prevalence of AP; and (3) examine the correlation between the technical quality of endodontic treatment in the MB1 canal and the prevalence of AP., Methods: We obtained and examined 800 cone-beam computed tomography (CBCT) scans from 800 patient records over 6 months. The parameters noted for each tooth included the tooth number; presence of missed canals in the MB root; configuration of missed MB2 canals (confluent or separate); technical acceptability of root canal treatment (RCT) of treated MB1 canals; and the CBCT periapical index score. Data were analyzed in SPSS version 24., Results: A total of 203 maxillary molars from 148 CBCT scans were included. The MB2 canal prevalence was 88.2% in maxillary first molars and 62.7% in maxillary second molars. MB2 was found in 164 endodontically treated maxillary molars. During treatment, MB2 was missed in 150 (91.5%) and treated in 14 (8.5%) teeth. A total of 103 teeth (50.73%) had AP, which was observed in 67.3% of teeth with a missed MB2 canal but only 14.3% of teeth with a treated MB2 canal. The prevalence of AP was 43.7% in teeth with confluent MB2 canals and 80.9% in teeth with separate MB2 canals., Conclusion: The MB2 canal frequency was significantly higher in the examined maxillary first molars than the maxillary second molars. The MB2 canal was missed in most teeth that underwent endodontic treatment. The AP prevalence was relatively higher in endodontically treated maxillary molars with missed MB2 canals., (© 2023 The Authors.)

Transparent hydrogels have found increasing applications in wearable electronics, printable devices, and tissue engineering. Integrating desired properties, such as conductivity, mechanical strength, biocompatibility, and sensitivity, in one hydrogel remains challenging. To address these challenges, multifunctional hydrogels of methacrylate chitosan, spherical nanocellulose, and β-glucan with distinct physicochemical characteristics were combined to develop multifunctional composite hydrogels. The nanocellulose facilitated the self-assembly of the hydrogel. The hydrogels exhibited good printability and adhesiveness. Compared with the pure methacrylated chitosan hydrogel, the composite hydrogels exhibited improved viscoelasticity, shape memory, and conductivity. The biocompatibility of the composite hydrogels was monitored using human bone marrow-derived stem cells. Their motion-sensing potential was analyzed on different parts of the human body. The composite hydrogels also possessed temperature-responsiveness and moisture-sensing abilities. These results suggest that the developed composite hydrogels demonstrate excellent potential to fabricate 3D-printable devices for sensing and moist electric generator applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

One of the significant challenges in bone tissue engineering (BTE) is the healing of traumatic tissue defects owing to the recruitment of local infection and delayed angiogenesis. Herein, a 3D printable multi-functional hydrogel composing polyphenolic carbon quantum dots (CQDs, 100 µg mL -1 ) and gelatin methacryloyl (GelMA, 12 wt%) is reported for robust angiogenesis, bone regeneration and anti-tumor therapy. The CQDs are synthesized from a plant-inspired bioactive molecule, 1, 3, 5-trihydroxybenzene. The 3D printed GelMA-CQDs hydrogels display typical shear-thinning behavior with excellent printability. The fabricated hydrogel displayed M2 polarization of macrophage (Raw 264.7) cells via enhancing anti-inflammatory genes (e.g., IL-4 and IL10), and induced angiogenesis and osteogenesis of human bone mesenchymal stem cells (hBMSCs). The bioprinted hBMSCs are able to produce vessel-like structures after 14 d of incubation. Furthermore, the 3D printed hydrogel scaffolds also show remarkable near infra-red (NIR) responsive properties under 808 nm NIR light (1.0 W cm -2 ) irradiation with controlled release of antitumor drugs (≈49%) at pH 6.5, and thereby killing the osteosarcoma cells. Therefore, it is anticipated that the tissue regeneration and healing ability with therapeutic potential of the GelMA-CQDs scaffolds may provide a promising alternative for traumatic tissue regeneration via augmenting angiogenesis and accelerated immunomodulation., (© 2023 Wiley-VCH GmbH.)

Introduction: Root canal success requires working length (WL) optimization. The current study examined how different apex locators on vital and non-vital teeth responded to instrument size., Materials and Methods: Three hundred patients (180 men and 120 women) receiving root canal therapy at the department of Conservative Dentistry and Endodontics were evaluated. Therefore, we determined that 200 of the patients' teeth (100 vital and 100 non-vital teeth from the upper and lower jaws' first molars) qualified for inclusion in our study. The pulp chamber was accessed using a sterile round bur. The coronal region of the root canal was preflared with successive Gates Glidden drills (Mani Inc. Japan) and irrigated with any one of the solutions 3% sodium hypochlorite (NaOCl), 2% chlorhexidine (CHX), or 17% ethylenediaminetetraacetic acid (EDTA) solution after checking canal patency with a size #10 K file, where (#-number). Later, the working length was established using Ingle's technique and a radiovisiograph (RVG) 0.5 mm short of the radiographic apex. Two endodontists approved this RVG., Results: Overall, the #15 K file and apex locators did not differ from Ingle's method. While the #8 K file differs significantly from all apex locators, the #10 K file showed a significant difference with all apex locators except Root ZX with 2% CHX ( P = 0.06). Irrigation didn't influence apex locators' accuracy., Conclusion: Even in the presence of irrigating solutions, electronic apex locator (EAL) can be utilized to calculate the working length with accuracy. The apex locators #15 k files, #10 k files, and #8 k files showed the most promising results., Competing Interests: There are no conflicts of interest., (Copyright: © 2023 Journal of Pharmacy and Bioallied Sciences.)

Introduction: There are numerous chances for pulpal irritation during the placement of a crown on a tooth. This study's goal was to find and examine the variables that influence the prevalence of routine root canal therapy after the teeth were restored with full coverage crowns., Methods: The hospital records were retrospectively evaluated from 2000 to 2010 for a decade. The demographics as well as the various variables that caused for the intervention with the root canal therapy for the teeth with the full crowns were evaluated. The values were compared for the significance., Results: The total number of the teeth that were finalized in the study was 4308. Of the total teeth that were treated with full coverage crowns, 50% were metal ceramic, 42% were full ceramic, and 9% were full metal crowns. After 10 years, possibility that every tooth with a crown would survive was 91%. The most frequent adverse incident was the intervention with the RCT. Metal ceramic crowns had poor survival rates and needed the maximum intervention. Younger age-group had least survival rate than the older age-groups., Conclusions: Endodontic therapy is unlikely to be necessary after crown installation. As the patient's age declines and all-ceramic or PFM crowns are used, this risk rises., Competing Interests: There are no conflicts of interest., (Copyright: © 2023 Journal of Pharmacy and Bioallied Sciences.)

Carbon dioxide (CO 2 ) is considered one of the eco-related key factors that negatively affect global climatic change. Also, CO 2 can play an important role in the postharvest quality of the agri-products. In this study, the impact of CO 2 on the quality of postharvest onions that were stored at 23 °C for 8 weeks was investigated. The weight loss, phenolic, flavonoid, flavanol, anthocyanin, antioxidant activity, and soluble sugar were analyzed during the study period. The results showed that 20% CO 2 treatment was significantly (P > 0.05) more effective than 15% CO 2 and control in inhibiting weight loss. Additionally, 20% CO 2 treatment significantly retained higher antioxidant enzyme activities such as CAT, APX, and SOD than 15% CO 2 and control. During storage, 20% CO 2 treatment significantly (P < 0.05) improved glucose, fructose, and sucrose levels by more than 15% CO 2 exposure and control groups. Besides the chlorogenic acid, kaempferol and quercetin were significantly (P < 0.05) higher in the 20% CO 2 than in the 15% CO 2 after 2 weeks of storage. In conclusion, this study's novelty comes from the broad prospects of using CO 2 for maximizing the stored onion phytochemical functionality that is usually affected by the room temperature long storage. This will help in the onion shelf-life extension by considering the quality-related attributes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

Introduction: The rotary systems have found a common application in the clinical practice for the endodontic therapies. Hence, we compared three recent endodontic systems for the comparison of the dentine removal and the apical transportation particularly in the curved canals., Methods: Oneshape, Pro Taper Next, and Edgefile X3 were the three systems that were compared. Thirty maxillary mesio buccal canals of the human permanent teeth were compared due to its curved nature. The volume of dentin removed and apical transportation (mm) were measured using micro-computed tomographic imaging (mm). Both the coronal section and the entire canal length had their dentin removed in accordance with measurements. Total dentine removed, coronal dentine removed, and the canal transportations were compared for the three rotary file systems. The values were compared with appropriate statistical tests for evaluating the significance., Results: There was no statistically significant difference between the three file systems for the dentin removed. The mean canal transportation was 0.33 ± 0.12, 0.21 ± 0.25, and 0.23 ± 0.21 mm, respectively, for Oneshape, Pro Taper Next, and Typhoon CM. In terms of statistics, there were no appreciable variations among the three rotary tools for apical transfer., Conclusions: The three rotary systems were comparable for the apical transportation and the dentine removal. Despite variations in the magnitude of apical enlargements, none of the instrumentation methods detected apical transportation., Competing Interests: There are no conflicts of interest., (Copyright: © 2023 Journal of Pharmacy and Bioallied Sciences.)

Introduction: The practice of removing root canal fillings with solvent materials is frequently required to help an irrigation solution enter the tubules. The current research was aimed at assessing the antifungal properties specifically the candida albicans of the various solvent materials used for the gutta-percha (GP) material., Materials and Methods: Current research was aimed at as a lab method using the disk diffusion technique where the zone of inhibition (ZOI) was calculated. The materials that were analyzed were: orange oil, xylene, turpentine oil, chloroform, and eucalyptus oil. Candida albicans was the test organism employed in the investigation. The agar plates were covered with approximately 500 μL of the suspension. The sterile and empty disks were impregnated with 10 μL of pure GP solvents. These plates were incubated for one day at room temperature. The ZOI's mean diameters were calculated for all five materials and quantified each solvent's fungicidal activity. For intergroup comparison, ANOVA was utilized. P values < 0.05 were deemed substantial., Results: The maximum inhibition exhibited by the Eucalyptus Oil it was 19.01 ± 1.02 mm. This was followed by Xylene. The other three solvents Chloroform, Orange Oil, and Turpentine Oil exhibited a similar ZOI. When all the solvents were compared there was a significant variance of P < 0.001. However, there were significant variances for the Eucalyptus Oil and the Xylene to all the other solvents P < 0.001., Conclusion: This investigation showed that, in comparison to other solvents, the use of eucalyptus oil considerably reduced the levels of Candida Albicans., Competing Interests: There are no conflicts of interest., (Copyright: © 2023 Journal of Pharmacy and Bioallied Sciences.)

Macrophage-assisted immunomodulation is an alternative strategy in tissue engineering, wherein the interplay between pro-inflammatory and anti-inflammatory macrophage cells and body cells determines the fate of healing or inflammation. Although several reports have demonstrated that tissue regeneration depends on spatial and temporal regulation of the biophysical or biochemical microenvironment of the biomaterial, the underlying molecular mechanism behind immunomodulation is still under consideration for developing immunomodulatory scaffolds. Currently, most fabricated immunomodulatory platforms reported in the literature show regenerative capabilities of a particular tissue, for example, endogenous tissue ( e.g ., bone, muscle, heart, kidney, and lungs) or exogenous tissue ( e.g ., skin and eye). In this review, we briefly introduced the necessity of the 3D immunomodulatory scaffolds and nanomaterials, focusing on material properties and their interaction with macrophages for general readers. This review also provides a comprehensive summary of macrophage origin and taxonomy, their diverse functions, and various signal transduction pathways during biomaterial-macrophage interaction, which is particularly helpful for material scientists and clinicians for developing next-generation immunomodulatory scaffolds. From a clinical standpoint, we briefly discussed the role of 3D biomaterial scaffolds and/or nanomaterial composites for macrophage-assisted tissue engineering with a special focus on bone and associated tissues. Finally, a summary with expert opinion is presented to address the challenges and future necessity of 3D bioprinted immunomodulatory materials for tissue engineering., Competing Interests: The authors declare no competing financial interests related to this article., (© 2023 The Authors.)

Background: Anomalous origin of pulmonary artery branch from ascending aorta (APA) in the presence of two separate semilunar valves is an uncommon entity necessitating early diagnosis and surgery to prevent development of irreversible pulmonary vascular disease. We evaluated our experience with the technique and outcome of 11 patients with this condition., Methods: Between January 2000 and December 2019, 11 patients were diagnosed with APA. Echocardiographic data were collected from the records, including the site of origin of the anomalous pulmonary artery, additional defects, pulmonary artery pressures, and biventricular function. Intraoperative charts were reviewed for the details of the surgical procedure and cardiopulmonary bypass. Post-operative data included survival, ventilatory support, and duration of hospital stay. After discharge, children were reviewed at 1 month, 3 months, 6 months, and then at yearly intervals., Results: Of the 11 patients, females were more than males (7:4) with a median age of 6 months (15 days-28 years) and median weight of 5.7 kg (1.8-40 kg). Nine patients underwent direct re-implantation of anomalous pulmonary artery branch to main pulmonary artery. The survival rate was 88.8% in our series. On follow-up, no re-operations or re-interventions were required and all surgically corrected patients were in stable clinical condition., Conclusion: Early- and midterm outcomes of children who underwent surgery for APA is convincing. Early direct re-implantation of the anomalous branch pulmonary artery to main pulmonary artery without any graft material is the optimal surgical strategy for these patients.

Biomimetic soft hydrogels used in bone tissue engineering frequently produce unsatisfactory outcomes. Here, it is investigated how human bone-marrow-derived mesenchymal stem cells (hBMSCs) differentiated into early osteoblasts on remarkably soft 3D hydrogel (70 ± 0.00049 Pa). Specifically, hBMSCs seeded onto cellulose nanocrystals incorporated methacrylate gelatin hydrogels are subjected to pulsatile pressure stimulation (PPS) of 5-20 kPa for 7 days. The PPS stimulates cellular processes such as mechanotransduction, cytoskeletal distribution, prohibition of oxidative stress, calcium homeostasis, osteogenic marker gene expression, and osteo-specific cytokine secretions in hBMSCs on soft substrates. The involvement of Piezo 1 is the main ion channel involved in mechanotransduction. Additionally, RNA-sequencing results reveal differential gene expression concerning osteogenic differentiation, bone mineralization, ion channel activity, and focal adhesion. These findings suggest a practical and highly scalable method for promoting stem cell commitment to osteogenesis on soft matrices for clinical reconstruction., (© 2023 Wiley-VCH GmbH.)

In recent years, three-dimensional (3D) bioprinting of conductive hydrogels has made significant progress in the fabrication of high-resolution biomimetic structures with gradual complexity. However, the lack of an effective cross-linking strategy, ideal shear-thinning, appropriate yield strength, and higher print fidelity with excellent biofunctionality remains a challenge for developing cell-laden constructs, hindering the progress of extrusion-based 3D printing of conductive polymers. In this study, a highly stable and conductive bioink was developed based on polypyrrole-grafted gelatin methacryloyl (GelMA-PPy) with a triple cross-linking (thermo-photo-ionically) strategy for direct ink writing-based 3D printing applications. The triple-cross-linked hydrogel with dynamic semi-inner penetrating polymer network (semi-IPN) displayed excellent shear-thinning properties, with improved shape fidelity and structural stability during 3D printing. The as-fabricated hydrogel ink also exhibited "plug-like non-Newtonian" flow behavior with minimal disturbance. The bioprinted GelMA-PPy-Fe hydrogel showed higher cytocompatibility (93%) of human bone mesenchymal stem cells (hBMSCs) under microcurrent stimulation (250 mV/20 min/day). Moreover, the self-supporting and tunable mechanical properties of the GelMA-PPy bioink allowed 3D printing of high-resolution biological architectures. As a proof of concept, we printed a full-thickness rat bone model to demonstrate the structural stability. Transcriptomic analysis revealed that the 3D bioprinted hBMSCs highly expressed gene hallmarks for NOTCH/mitogen-activated protein kinase (MAPK)/SMAD signaling while down-regulating the Wnt/β-Catenin and epigenetic signaling pathways during osteogenic differentiation for up to 7 days. These results suggest that the developed GelMA-PPy bioink is highly stable and non-toxic to hBMSCs and can serve as a promising platform for bone tissue engineering applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Nanocellulose application has been increasing owing to its appealing physicochemical properties. Monitoring of the crystallinity, surface topography, and reactivity of this high-aspect-ratio nanomaterial is crucial for efficient tissue engineering. Controlling macrophage polarization phenotype remains a challenge in regenerative medicine and tissue engineering. Herein, we monitored the effects of shape-regulated (rod and spherical) nanocellulose on the macrophage modulatory potential of RAW 246.7 cells in vitro. Spherical nanocellulose (s-NC) exhibited higher thermal stability and biocompatibility than rod nanocellulose. Macrophage polarization was profoundly affected by nanocellulose topography and incubation period. M2 polarization was observed in vitro after 1 day of treatment with s-NC, followed by M1 polarization after treatment for longer periods. Transcriptome analysis similarly revealed that M1 polarization was dominant after 1 day h of incubation with both nanocellulose types. These findings demonstrate that macrophage polarization can be controlled by selecting suitable nanocellulose shape and incubation time for desired applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The development of multifunctional wearable electronic devices has received considerable attention because of their attractive applications. However, integrating multifunctional abilities into one component remains a challenge. To address this, we have developed a tannic acid-functionalized spherical nanocellulose/polyvinyl alcohol composite hydrogel using borax as a crosslinking agent for strain-sensing applications. The hydrogel demonstrates improved mechanical and recovery strengths and maintains its mechanical strength under freezing conditions. The hydrogels show ultra-stretching, adhesive, self-healing, and conductive properties, making them ideal candidates for developing strain-based wearable devices. The hydrogel exhibits good sensitivity with a 4.75 gauge factor. The cytotoxicity of the developed hydrogels was monitored with human dermal fibroblast cells by WST-8 assay in vitro. The antibacterial potential of the hydrogels was evaluated using Escherichia coli. The hydrogels demonstrate enhanced antibacterial ability than the control. Therefore, the developed multifunctional hydrogels with desirable properties are promising platforms for strain sensor devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) pandemic has been considered with great importance on correct screening procedure. The detection efficiency of recent variants of concern were observed by comparing 5 commercial RT-PCR kits and a SYBR-green method developed and validated in our laboratory. The RNA was extracted from nasopharyngeal samples from suspected COVID-19 patients and RT-PCR assay was performed according to the instruction of the respective manufacturers. The specificity and sensitivity of Maccura kit was 81.8% and 82.5%, A*Star kit was 100% and 75.4%, Da An Gene kit was 100% and 68.4%, Sansure kit was 54.5% and 91.2% and TaqPath kit was 100% and 70.2% respectively. Our in house SYBR-Green method showed a consistent detection result with 90.9% specificity and 91.2% sensitivity. We also found that detection kits targeting more genes showed better accuracy which facilitates less false positive results (< 20%). Our study found a significant difference (p < 0.005) in Ct value reported for common target genes shared by the RT-PCR kits in relation with different variants of COVID-19 infection. Recent variants of concerns contain more than 30 mutations in the spike proteins including 2 deletion and a unique insertion mutation by which makes detection of these variants difficult and these facilitates the variants to escape from being detected., (© 2023. The Author(s).)

Heat shock protein 90 (Hsp90) is a promising anticancer target because of its chaperoning effect on multiple oncogenic proteins. The activity of Hsp90 is dependent on its ability to hydrolyze adenosine triphosphate (ATP) to adenosine diphosphate (ADP) and free phosphate. The ATPase activity of Hsp90 is linked to its chaperoning function; ATP binds to the N-terminal domain of the Hsp90, and disrupting its binding was found to be the most successful strategy in suppressing Hsp90 function. The ATPase activity can be measured by a colorimetric malachite green assay, which determines the amount of free phosphate formed by ATP hydrolysis. Here, a procedure for determining the ATPase activity of yeast Hsp90 by using the malachite green phosphate assay kit is described. Further, detailed instructions for the discovery of Hsp90 inhibitors by taking geldanamycin as an authentic inhibitor is provided. Finally, the application of this assay protocol through the high-throughput screening (HTS) of inhibitor molecules against yeast Hsp90 is discussed.

The conversion of liquid resin into solid structures upon exposure to light of a specific wavelength is known as photopolymerization. In recent years, photopolymerization-based 3D printing has gained enormous attention for constructing complex tissue-specific constructs. Due to the economic and environmental benefits of the biopolymers employed, photo-curable 3D printing is considered an alternative method for replacing damaged tissues. However, the lack of suitable bio-based photopolymers, their characterization, effective crosslinking strategies, and optimal printing conditions are hindering the extensive application of 3D printed materials in the global market. This review highlights the present status of various photopolymers, their synthesis, and their optimization parameters for biomedical applications. Moreover, a glimpse of various photopolymerization techniques currently employed for 3D printing is also discussed. Furthermore, various naturally derived nanomaterials reinforced polymerization and their influence on printability and shape fidelity are also reviewed. Finally, the ultimate use of those photopolymerized hydrogel scaffolds in tissue engineering is also discussed. Taken together, it is believed that photopolymerized 3D printing has a great future, whereas conventional 3D printing requires considerable sophistication, and this review can provide readers with a comprehensive approach to developing light-mediated 3D printing for tissue-engineering applications., (© 2022 Wiley-VCH GmbH.)

Background: It has been observed that the lunar phases alter the fasting plasma glucose (FPG) level in type-2 diabetic (T2DM) subjects. Diabetic peripheral neuropathy (DPN) was also reported to be associated with elevated foot temperature (FT), oxidative stress, and inflammation in T2DM subjects., Objectives: The purpose of the present study was to evaluate the changes in FT, oxidative stress, and inflammation levels and assess the relationship of FT with oxidative stress, antioxidant enzyme activity, and inflammatory markers in T2DM subjects at different lunar phases., Methods: The plasma glucose, glycated hemoglobin, and dorsal and plantar surface temperatures of the feet by infrared dermal thermometer were measured in 88 randomly selected T2DM subjects at different lunar phases. The levels of oxidative stress and inflammation were assessed by measuring malondialdehyde (MDA), glucose 6-phosphate dehydrogenase (G6PDH), and tumor necrosis factoralpha (TNF-α)., Results: The FTs, MDA, and TNF-α were significantly increased, and G6PDH activity was significantly decreased in the new moon (NM) and full moon (FM) than in the third quarter (TQ) and first quarter (FQ) for both sexes. The FTs, MDA, and TNF-α levels were significantly positively correlated, whereas G6PDH activity was significantly negatively correlated with FPG at NM and FM in both sexes. The MFT was significantly positively correlated with MDA and TNF-α and significantly negatively correlated with G6PDH at NM and FM in T2DM subjects., Conclusion: The lunar phases showed a prominent influence on the FT, oxidative stress, and inflammatory status in T2DM subjects, which might be due to the existence of biological rhythm interaction with lunar electromagnetic radiations., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The hunt for novel antibiotics has become a global public health imperative due to the rise in multidrug-resistant microorganisms, untreatable infection cases, overuse, and inefficacy of modern antibiotics. Polyphenols are getting much attention in research due to their multiple biological effects; their use as antimicrobial agents is attributed to their activity and that microbes have a hard time developing resistance to these natural compounds. Polyphenols are secondary metabolites produced in higher plants. They are known to possess various functional properties in the human body. Polyphenols also exhibit antibacterial activities against foodborne pathogens. Their antibacterial mechanism is based on inhibiting bacterial biofilm formation or inactivating enzymes. This review focused on polyphenol-protein interactions and the creation of this complex as a possible antibacterial agent. Also, different phenolic interactions on bacterial proteins, efflux pump, cell membrane, bacterial adhesion, toxins, and other bacterial proteins will be explored; these interactions can work in a synergic combination with antibiotics or act alone to assure bacterial inhibition. Additionally, our review will focus on polyphenol-protein interaction as a possible strategy to eradicate bacteria because polyphenols have shown a robust enzyme-inhibitory characteristic and a high tendency to complex with proteins, a response that neutralizes any bactericidal potential.

354Fabrication of multifunctional hemostats is indispensable against chronic blood loss and accelerated wound healing. Various hemostatic materials that aid wound repair or rapid tissue regeneration has been developed in the last 5 years. This review provides an overview of the three-dimensional (3D) hemostatic platforms designed through the latest technologies like electrospinning, 3D printing, and lithography, solely or in combination, for application in rapid wound healing. We critically discuss the pivotal role of micro/nano-3D topography and biomaterial properties in mediating rapid blood clots and healing at the hemostat-biointerface. We also highlight the advantages and limitations of the designed 3D hemostats. We anticipate that this review will guide the fabrication of smart hemostats of the future for tissue engineering applications., Competing Interests: The authors declare no conflicts of interest., (Copyright: © 2022 Ganguly et al.)

Little progress has been achieved on the synthesis of hydrophilic carbon dots (CDs), derived from polycyclic aromatic hydrocarbons, as an excellent photothermal agent. In this study, a strategy was developed to synthesize highly photoluminescent greenish-yellow emissive CDs based on nitration followed by hydrothermal carbonization of the polycyclic aromatic hydrocarbon precursor, perylene. The perylene-derived CDs (PY-CDs) exhibited an excellent NIR-light (808 nm) harvesting property toward high photothermal conversion efficiency (PCE = ∼56.7%) and thus demonstrated remarkable NIR-light responsive photothermal bactericidal performance. Furthermore, these fluorescent PY-CD nanoprobes displayed excitation-dependent polychromatic emissions in the range of 538-600 nm, with the maximum emission at 538 nm. This enables intense multicolor biological imaging of cellular substances with long-term photostability, nontoxicity, and effective subcellular distribution. The bactericidal action of PY-CDs is likely due to the elevated reactive oxygen species amplification in cooperation with the hyperthermia effect. This study offers a potential substitute for multicolor imaging-guided metal-free carbon-based photothermal therapy., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)