Search

Stellar deformations play a significant role in the dynamical evolution of stars in binary systems, impacting the tidal dissipation and the outcomes of mass transfer processes. The prevalent method for modelling the deformations and tidal interactions of celestial bodies solely relies on the perturbative approach, which assumes that stellar deformations are minor perturbations to the spherical symmetry. An observable consequence of stellar deformations is the apsidal motion in eccentric systems. Our objective is to assert the reliability of the perturbative approach when applied to close and strongly deformed binary systems. We have developed a non-perturbative 3D modelling method designed to account for high stellar deformations to explore the limitations of the perturbative models. Our research highlights that the perturbative model becomes imprecise and underestimates the tidal force and rate of apsidal motion at a short orbital separation. This discrepancy primarily results from the first-order treatment in the perturbative approach, and cannot be rectified using straightforward mathematical corrections due to the strong non-linearity and numerous parameters of the problem. We have determined that our methodology affects the modelling of approximately 42% of observed binary systems with measured apsidal motion, introducing a discrepancy greater than 2% when the normalised orbital separation verifies q^(-1/5)a(1-e^2)/R1 < 6.5. The perturbative approach underestimates tidal interactions between bodies up to ~40% for close low-mass binaries. All the subsequent modelling is impacted by our findings, in particular, the tidal dissipation is significantly underestimated. As a result, all binary stellar models are imprecise when applied to systems with a low orbital separation, and the outcomes of these models are also affected by these inaccuracies., Comment: accepted for publication in A&A

In close binary systems, tidal interactions and rotational effects can strongly influence stellar evolution as a result of mass-transfer, common envelope phases, ... All these aspects can only be treated following improvements of theoretical models, taking into account the breaking of spherical symmetry occurring in close binaries. Current models of binary stars are relying either on the so-called "Roche model" or the perturbative approach that in each case results on several assumptions concerning the gravitational, tidal and centrifugal potentials.We developed a new non-perturbative method to compute precise structural deformation of binary system in three dimensions that is valid even in the most distorted cases. We then compared our new method to the Roche and perturbative models for different orbital separations and binary components. We found that in the most distorted cases both Roche and perturbative models are significantly underestimating the deformation of binaries. The effective gravity and the overall structural deformations are also noticeably different in the most distorted cases leading, for the interpretation of observations, to modifications of the usual gravity darkening generally obtained through the Roche model. Moreover we found that the dipolar term of the gravitational potential, usually neglected by the perturbative theory, has the same order of magnitude than the leading tidal term in the most distorted cases. We developed a new method that is capable of precisely computing the deformations of binary system composed of any type of stars, even compact objects. For all stars studied the differences in deformation with respect to the Roche or perturbative models are significant in the most distorted cases impacting both the interpretation of observations and the theoretical structural depiction of these distorted bodies., Comment: submitted to A&A

The measurement of the apsidal motion in close eccentric massive binary systems provides essential information to probe the internal structure of the stars that compose the system. Following the determination of the fundamental stellar and binary parameters, we make use of the tidally induced apsidal motion to infer constraints on the internal structure of the stars composing the binary system HD152219. The extensive set of spectroscopic, photometric, and radial velocity observations allows us to constrain the fundamental parameters of the stars together with the rate of apsidal motion of the system. Stellar structure and evolution models are further built with the Cl\'es code testing different prescriptions for the internal mixing occurring inside the stars. The effect of stellar rotation axis misalignment with respect to the normal to the orbital plane on our interpretation of the apsidal motion in terms of internal structure constants is investigated. Made of an O9.5 III primary star (M1 = 18.64+/-0.47M${_\odot}$, R1 = 9.40+0.14-0.15R${_\odot}$, Teff,1 = 30900+/-1000 K) and a B1-2 V-III secondary star (M2 = 7.70+/-0.12M${_\odot}$, R2 = 3.69+/-0.06R${_\odot}$, Teff,2 = 21697+/-1000 K), the binary system HD152219 displays apsidal motion at a rate (1.198+/-0.300){\deg}yr-1. The weighted-average mean of the internal structure constant of the binary system is inferred: k2 = 0.00173+/-0.00052. For the Cl\'es models to reproduce the k2-value of the primary star, a significant enhanced mixing is required, notably through the turbulent mixing, but at the cost that other stellar parameters cannot be reproduced simultaneously. The difficulty to reproduce the k2-value simultaneously with the stellar parameters as well as the incompatibility between the age estimates of the primary and secondary stars are indications that some physics of the stellar interior are still not completely understood., Comment: 30 pages

This study is the first of a series of papers that provide a technique to analyse the mixed-modes frequency spectra and characterise the structure of stars on the subgiant and red-giant branches. We define seismic indicators, relevant of the stellar structure and study their evolution on a grid of models. The proposed method, EGGMiMoSA, relies on the asymptotic description of mixed modes, defines initial guesses for the parameters, and uses a Levenberg-Marquardt technique to adjust the mixed-modes pattern efficiently. We follow the evolution of the mixed-modes parameters along a grid of models from the subgiant phase to the RGB bump and extend past works. We show the impact of the mass and composition on their evolution. The evolution of the period spacing $\Delta\pi_1$, pressure offset $\epsilon_p$, gravity offset $\epsilon_g$, and coupling factor $q$ as a function of $\Delta\nu$ is little affected by the chemical composition and it follows two different regimes depending on the evolutionary stage. On the subgiant branch, the models display a moderate core-envelope density contrast. The evolution of $\Delta \pi_1$, $\epsilon_p$, $\epsilon_g$, and $q$ thus significantly changes with the mass. Also, we demonstrate that, at fixed Z/X and with proper measurements of $\Delta\pi_1$ and $\Delta\nu$, we may unambiguously constrain the mass, radius and age of a subgiant star. Conversely, on the red-giant branch, the core-envelope density contrast becomes very large. Consequently, the evolution of $\epsilon_p$, $\epsilon_g$ and $q$ as a function of $\Delta\nu$ becomes independent of the mass. This is also true for $\Delta \pi_1$ in stars with masses $\lesssim 1.8M_\odot$ because of core electron degeneracy. This degeneracy is lifted for higher masses, again allowing for a precise measurement of the age. Overall, our computations qualitatively agree with past observed and theoretical studies., Comment: 21 pages, accepeted on the 30th of June 2021, condensed abstract to meet the 1920 characters requirement (the full abstract will be available in the journal)

Context: Being part of the brightest solar-like stars, and close solar analogues, the 16 Cygni system is of great interest to the scientific community and may provide insight into the past and future evolution of our Sun. It has been observed thoroughly by the Kepler satellite, which provided us with data of an unprecedented quality. Aims: This paper is the first of a series aiming to extensively characterise the system. We test several choices of micro- and macro-physics to highlight their effects on optimal stellar parameters and provide realistic stellar parameter ranges. Methods: We used a recently developed method, WhoSGlAd, that takes the utmost advantage of the whole oscillation spectrum of solar-like stars by simultaneously adjusting the acoustic glitches and the smoothly varying trend. For each choice of input physics, we computed models which account, at best, for a set of seismic indicators that are representative of the stellar structure and are as uncorrelated as possible. The search for optimal models was carried out through a Levenberg-Marquardt minimisation. First, we found individual optimal models for both stars. We then selected the best candidates to fit both stars while imposing a common age and composition. Results: We computed realistic ranges of stellar parameters for individual stars. We also provide two models of the system regarded as a whole. We were not able to build binary models with the whole set of choices of input physics considered for individual stars as our constraints seem too stringent. We may need to include additional parameters to the optimal model search or invoke non-standard physical processes., Comment: 25 pages, Accepted for publication in Astronomy and Astrophysics

Apsidal motion in massive eccentric binaries offers precious information about the internal structure of the stars. This is especially true for twin binaries consisting of two nearly identical stars. We make use of the tidally induced apsidal motion in the twin binary HD152248 to infer constraints on the internal structure of the O7.5 III-II stars composing this system. We build stellar evolution models with the code Cl\'es assuming different prescriptions for the internal mixing occurring inside the stars. We identify the models that best reproduce the observationally determined present-day properties of the components of HD152248, as well as their $k_2$, and the apsidal motion rate of the system. We analyse the impact of some poorly constrained input parameters, including overshooting, turbulent diffusion, and metallicity. We further build 'single' and 'binary' GENEC models that account for stellar rotation to investigate the impacts of binarity and rotation. We discuss some effects that could bias our interpretation of the apsidal motion in terms of the internal structure constant. Reproducing the observed $k_2$ value and rate of apsidal motion simultaneously with the other stellar parameters requires a significant amount of internal mixing or enhanced mass-loss. The results suggest that a single-star evolution model is sufficient to describe the physics inside this binary system. Qualitatively, the high turbulent diffusion required to reproduce the observations could be partly attributed to stellar rotation. Higher-order terms in the apsidal motion are negligible. Only a very severe misalignment of the rotation axes could significantly impact the rate of apsidal motion, but such a high misalignment is highly unlikely in such a binary system. We infer an age estimate of $5.15\pm0.13$ Myr for the binary and initial masses of $32.8\pm0.6$ M$_\odot$ for both stars., Comment: 16 pages, A&A accepted

Gamma Doradus stars present an incredibly rich pulsation spectra, with gravito-inertial modes, in some cases supplemented with delta Scuti-like pressure modes and in numerous cases with Rossby modes. The present paper aims at showing that, in addition to these modes established in the radiative envelope, pure inertial modes, trapped in the convective core, can be detected in Kepler observations of gamma Doradus stars, thanks to their resonance with the gravito-inertial modes. We start by using a simplified model of perturbations in a full sphere of uniform density. Under these conditions, the spectrum of pure inertial modes is known from analytical solutions of the so-called Poincare equation. We then compute coupling factors which help select the pure inertial modes which interact best with the surrounding dipolar gravito-inertial modes. Using complete calculations of gravito-inertial modes in realistic models of gamma Doradus stars, we are able to show that the pure inertial/gravito-inertial resonances appear as dips in the gravito-inertial mode period spacing series at spin parameters close to those predicted by the simple model. We find the first evidence of such dips in the Kepler gamma Doradus star KIC5608334. Finally, using complete calculations in isolated convective cores, we find that the spin parameters of the pure inertial/gravito-inertial resonances are also sensitive to the density stratification of the convective core. In conclusion, we have discovered that certain dips in gravito-inertial mode period spacings observed in some Kepler stars are in fact the signatures of resonances with pure-inertial modes that are trapped in the convective core. This holds the promise to finally access the central conditions , i.e. rotation and density stratification, of intermediate-mass stars on the main sequence., Comment: 11 pages, 8 figures, accepted for publication in A&A

We present a first application of Whosglad method to the components A and B of the 16 Cygni system. The method was developed to provide a comprehensive analysis of stellar oscillation spectra. It defines new seismic indicators which are as uncorrelated and precise as possible and hold detailed information about stellar interiors. Such indicators, as illustrated in the present paper, may be used to generate stellar models via forward seismic modeling. Finally, seismic constraints retrieved by the method provide realistic stellar parameters., Comment: 4 pages, 3 figures. Proceedings of the meeting Physics of Oscillating Stars (PHOST), Banyuls-sur-mer, France, 2-7 September 2018 (Session First Posters Session), published on December 1st 2018

Aims: We develop a method that provides a comprehensive analysis of the oscillation spectra of solar-like pulsators. We define new seismic indicators that should be as uncorrelated and as precise as possible and should hold detailed information about stellar interiors. This is essential to improve the quality of the results obtained from asteroseismology as it will provide better stellar models which in turn can be used to refine inferences made in exoplanetology and galactic archaeology. Methods: The presented method - WhoSGlAd - relies on Gram-Schmidt's orthogonalisation process. A Euclidean vector subspace of functions is defined and the oscillation frequencies are projected over an orthonormal basis in a specific order. This allows the obtention of independent coefficients that we combine to define independent seismic indicators. Results: The developed method has been shown to be stable and to converge efficiently for solar-like pulsators. Thus, detailed and precise inferences can be obtained on the mass, the age, the chemical composition and the undershooting in the interior of the studied stars. However, attention has to be paid when studying the helium glitch as there seems to be a degeneracy between the influence of the helium abundance and that of the heavy elements on the glitch amplitude. As an example, we analyse the 16CygA (HD 186408) oscillation spectrum to provide an illustration of the capabilities of the method., Comment: Accepted for publication in Astronomy and Astrophysics, 20 pages

The CoRoT and Kepler missions provided a wealth of high-quality data for solar-like oscillations. To make the best of such data for seismic inferences, we need theoretical models with precise near-surface structure, which has significant influence on solar-like oscillation frequencies. The mixing-length parameter, $\alpha$, is a key factor for the near-surface structure. In the convection formulations used in evolution codes, the $\alpha$ is a free parameter that needs to be properly specified. We calibrated $\alpha$ values by matching entropy profiles of 1D envelope models with those of 3D CO$^5$BOLD models. For such calibration, previous works concentrated on the classical mixing-length theory (MLT). Here we also analyzed the full spectrum turbulence (FST) models. For the atmosphere part in the 1D models, we use the Eddington grey $T(\tau)$ relation and the one with the solar-calibrated Hopf-like function. For both the MLT and FST models with a mixing length $l=\alpha H_p$, calibrated $\alpha$ values increase with increasing $g$ or decreasing $T_{\rm eff}$. For the FST models, we also calibrated values of $\alpha^*$ defined as $l=r_{\rm top}-r+\alpha^*H_{p,{\rm top}}$. $\alpha^*$ is found to increase with $T_{\rm eff}$ and $g$. As for the correspondence to the 3D models, the solar Hopf-like function gives a photospheric-minimum entropy closer to a 3D model than the Eddington $T(\tau)$. The structure below the photosphere depends on the convection model. However, not a single convection model gives the best correspondence since the averaged 3D quantities are not necessarily related via an EOS. Although the FST models with $l=r_{\rm top}-r+\alpha^*H_{p,{\rm top}}$ are found to give the frequencies closest to the solar observed ones, a more appropriate treatment of the top part of the 1D convective envelope is necessary., Comment: 14 pages, 18 figures, accepted to Astronomy and Astrophysics

Context. Convective regions in stellar models are always associated with uncertainties, for example due to extra-mixing or the possible inaccurate position of the transition from convective to radiative transport of energy. These have a strong impact on stellar models and their fundamental parameters. The most promising method to reduce these uncertainties is to use asteroseismology to derive diagnostics probing the structural characteristics of these regions. Aims. We wish to use custom-made integrated quantities to improve the capabilities of seismology to probe convective regions in stellar interiors. We hope to increase the number of indicators obtained with structural seismic inversions to provide additional constraints on stellar models and the fundamental parameters determined from theoretical modeling. Methods. First, we present new kernels associated with a proxy of the entropy in stellar interiors. We then show how these kernels can be used to build custom-made integrated quantities probing convective regions inside stellar models. We present two indicators suited to probe convective cores and envelopes, respectively, and test them on artificial data. Results. We show that it is possible to probe both convective cores and envelopes using appropriate indicators obtained with structural inversion techniques. These indicators provide direct constraints on a proxy of the entropy of the stellar plasma, sensitive to the characteristics of convective regions. These constraints can then be used to improve the modeling of solar-like stars by providing an additional degree of selection of models obtained from classical forward modeling approaches. We also show that in order to obtain very accurate indicators, we need l = 3 modes for the envelope but that the core-conditions indicator is more flexible in terms of the seismic data required for its use., Comment: Accepted for publication in Astronomy and Astrophysics

Modelling the base of the solar convective envelope is a tedious problem. Since the first rotation inversions, solar modellers are confronted with the fact that a region of very limited extent has an enormous physical impact on the Sun. Indeed, it is the transition region from differential to solid body rotation, the tachocline, which furthermore is influenced by turbulence and is also supposed to be the seat of the solar magnetic dynamo. Moreover, solar models show significant disagreement with the sound speed profile in this region. In this paper, we show how helioseismology can provide further constraints on this region by carrying out an inversion of the Ledoux discriminant. We compare these inversions for Standard Solar Models built using various opacity tables and chemical abundances and discuss the origins of the discrepancies between Solar Models and the Sun., Comment: Accepted for publication as a letter in MNRAS

The solar metallicity issue is a long-lasting problem of astrophysics, impacting multi- ple fields and still subject to debate and uncertainties. While spectroscopy has mostly been used to determine the solar heavy elements abundance, helioseismologists at- tempted providing a seismic determination of the metallicity in the solar convective enveloppe. However, the puzzle remains since two independent groups prodived two radically different values for this crucial astrophysical parameter. We aim at provid- ing an independent seismic measurement of the solar metallicity in the convective enveloppe. Our main goal is to help provide new information to break the current stalemate amongst seismic determinations of the solar heavy element abundance. We start by presenting the kernels, the inversion technique and the target function of the inversion we have developed. We then test our approach in multiple hare-and-hounds exercises to assess its reliability and accuracy. We then apply our technique to solar data using calibrated solar models and determine an interval of seismic measurements for the solar metallicity. We show that our inversion can indeed be used to estimate the solar metallicity thanks to our hare-and-hounds exercises. However, we also show that further dependencies in the physical ingredients of solar models lead to a low accuracy. Nevertheless, using various physical ingredients for our solar models, we determine metallicity values between 0.008 and 0.014., Comment: Accepted for publication in MNRAS

The Sun is the most constrained and well-studied of all stars. As a consequence, the physical ingredients entering solar models are used as a reference to study all other stars observed in the Universe. However, our understanding of the solar structure is still imperfect, as illustrated by the current debate on the heavy element abundances in the Sun. We wish to provide additional information on the solar structure by carrying out structural inversions of a new physical quantity, a proxy of the entropy of the solar plasma which properties are very sensitive to the temperature gradient below the convective zone. We use new structural kernels to carry out direct inversions of an entropy proxy of the solar plasma and compare the solar structure to various standard solar models built using various opacity tables and chemical abundances. We also link our results to classical tests commonly found in the literature. Our analysis allows us to probe more efficiently the uncertain regions of the solar models, just below the convective zone, paving the way for new in-depth analyses of the Sun taking into account additional physical uncertainties of solar models beyond the specific question of chemical abundances., Comment: Accepted for publication in Astronomy & Astrophysics

Deciphering the assembly history of the Milky Way is a formidable task, which becomes possible only if one can produce high-resolution chrono-chemo-kinematical maps of the Galaxy. Data from large-scale astrometric and spectroscopic surveys will soon provide us with a well-defined view of the current chemo-kinematical structure of the Milky Way, but will only enable a blurred view on the temporal sequence that led to the present-day Galaxy. As demonstrated by the (ongoing) exploitation of data from the pioneering photometric missions CoRoT, Kepler, and K2, asteroseismology provides the way forward: solar-like oscillating giants are excellent evolutionary clocks thanks to the availability of seismic constraints on their mass and to the tight age-initial-mass relation they adhere to. In this paper we identify five key outstanding questions relating to the formation and evolution of the Milky Way that will need precise and accurate ages for large samples of stars to be addressed, and we identify the requirements in terms of number of targets and the precision on the stellar properties that are needed to tackle such questions. By quantifying the asteroseismic yields expected from PLATO for red-giant stars, we demonstrate that these requirements are within the capabilities of the current instrument design, provided that observations are sufficiently long to identify the evolutionary state and allow robust and precise determination of acoustic-mode frequencies. This will allow us to harvest data of sufficient quality to reach a 10% precision in age. This is a fundamental pre-requisite to then reach the more ambitious goal of a similar level of accuracy, which will only be possible if we have to hand a careful appraisal of systematic uncertainties on age deriving from our limited understanding of stellar physics, a goal which conveniently falls within the main aims of PLATO's core science., Comment: 17 pages, 9 figures, accepted for publication in Astronomical Notes

Context: Mode identification has remained a major obstacle in the interpretation of pulsation spectra in rapidly rotating stars. Aims: We would like to test mode identification methods and seismic diagnostics in rapidly rotating stars, using oscillation spectra based on new theoretical predictions. Methods: We investigate the auto-correlation function and Fourier transform of theoretically calculated frequency spectra, in which modes are selected according to their visibilities. Given the difficulties in predicting intrinsic mode amplitudes, we experimented with various ad-hoc prescriptions for setting these, including using random values. Furthermore, we analyse the ratios between mode amplitudes observed in different photometric bands. Results: When non-random intrinsic mode amplitudes are used, our results show that it is possible to extract the large frequency separation or half its value, and sometimes twice the rotation rate, from the auto-correlation function. The Fourier transforms are mostly sensitive to the large frequency separation or half its value. When the intrinsic mode amplitudes include random factors, the results are far less favourable. We also find that amplitude ratios provide a good way of grouping together modes with similar characteristics. By analysing the frequencies of these groups, it is possible to constrain mode identification as well as determine the large frequency separation and the rotation rate., Comment: 15 pages, 12 figures, accepted in A&A

The space-borne missions have provided a wealth of highly accurate data. However, our inability to properly model the upper-most region of solar-like stars prevents us from making the best of these observations. This problem is called "surface effect" and a key ingredient to solve it is turbulent pressure for the computation of both the equilibrium models and the oscillations. While 3D hydrodynamic simulations help to include properly the turbulent pressure in the equilibrium models, the way this surface effect is included in the computation of stellar oscillations is still subject to uncertainties. We aim at determining how to properly include the effect of turbulent pressure and its Lagrangian perturbation in the adiabatic computation of the oscillations. We also discuss the validity of the gas-gamma model (GGM) and reduced gamma model (RGM) approximations, which have been used to compute adiabatic oscillations of equilibrium models including turbulent pressure. We use a patched model of the Sun with an inner part constructed by a 1D stellar evolution code (CESTAM) and an outer part by the 3D hydrodynamical code (CO$^5$BOLD). Then, the adiabatic oscillations are computed using the ADIPLS code for the GGM and RGM and with the MAD code imposing the adiabatic condition on an existing time-dependent convection (TDC) formalism. We show that the computation of the oscillations using the TDC formalism in the adiabatic limit improves significantly the agreement with the observed frequencies compared to the GGM and RGM. Of the components of the turbulent pressure perturbation, the perturbation of the density and advection term is found to contribute most to the frequency shift. We propose a formalism to evaluate the frequency shift due to the inclusion of the term with the turbulent pressure perturbation in the variational principle in order to extrapolate our result to other stars., Comment: 11 pages, 7 figures, accepted for publication in Astronomy and Astrophysics

Thanks to space-based photometry missions CoRoT and Kepler, we benefit from a wealth of seismic data for stars other than the sun. In the future, K2, Tess, and Plato will complement this data and provide observations in addition to those already at hand. The availability of this data leads to questions on how it is feasible to extend linear structural inversion techniques to stars other than the sun. Linked to this problem is the question of the validity of the linear assumption. In this study, we analyse its limitations with respect to changes of structural variables.We wish to provide a more extended theoretical background to structural linear inversions by doing a study of the validity of the linear assumption for various structural variables. First, we recall the origins of the linear assumption for structural stellar inversions and explain its importance for asteroseismic studies. We recall the impact of unknown structural quantities such as the mass and the radius of the star on structural inversion results. We explain how kernels for new structural variables can be derived using two methods, one suited to asteroseismic targets, the other to helioseismic targets. For this second method, we present a new structural pair, namely the (A, Y) structural kernels. The kernels are tested in various numerical experiments that enable us to evaluate the weaknesses of different pairs and the domains of validity of their respective linear regime. The numerical tests we carry out allow us to disentangle the impact of various uncertainties in stellar models on the verification of the linear integral relations. We show the importance of metallicity, the equation of state, extra-mixing, and inaccuracies in the microphysics. We discuss the limitations of the method of conjugated functions due to the lack of extremely precise determinations of masses or radii in the asteroseismology., Comment: 14 pages. Accepted for publication in Astronomy and Astrophysics

Massive binary systems are important laboratories in which to probe the properties of massive stars and stellar physics in general. In this context, we analysed optical spectroscopy and photometry of the eccentric short-period early-type binary HD 152218 in the young open cluster NGC 6231. We reconstructed the spectra of the individual stars using a separating code. The individual spectra were then compared with synthetic spectra obtained with the CMFGEN model atmosphere code. We furthermore analysed the light curve of the binary and used it to constrain the orbital inclination and to derive absolute masses of 19.8 +/- 1.5 and 15.0 +/- 1.1 solar masses. Combining radial velocity measurements from over 60 years, we show that the system displays apsidal motion at a rate of (2.04^{+.23}_{-.24}) degree/year. Solving the Clairaut-Radau equation, we used stellar evolution models, obtained with the CLES code, to compute the internal structure constants and to evaluate the theoretically predicted rate of apsidal motion as a function of stellar age and primary mass. In this way, we determine an age of 5.8 +/- 0.6 Myr for HD 152218, which is towards the higher end of, but compatible with, the range of ages of the massive star population of NGC 6231 as determined from isochrone fitting., Comment: Accepted for publication in Astronomy & Astrophysics

The 16Cyg binary system hosts the solar-like Kepler targets with the most stringent observational constraints. Moreover, this system is particularly interesting since both stars are very similar in mass but the A component is orbited by a red dwarf, whereas the B component is orbited by a Jovian planet and thus could have formed a more complex planetary system. In our previous study, we showed that seismic inversions of integrated quantities could be used to constrain microscopic diffusion in the A component. In this study, we analyse the B component in the light of a more regularised inversion. We wish to analyse independently the B component of the 16Cyg binary system using the inversion of an indicator dedicated to analyse core conditions, denoted tu. Using this independent determination, we wish to analyse any differences between both stars due to the potential influence of planetary formation on stellar structure and/or their respective evolution. First, we recall the observational constraints for 16CygB and the method we used to generate reference stellar models. The inversion results were then used to analyse the differences between the A and B components. The tu indicator for 16CygB shows a disagreement with models including microscopic diffusion and sharing the chemical composition previously derived for 16CygA. Small changes in chemical composition are insufficient to solve the problem but that extra mixing can account for the differences seen between both stars. We use a parametric approach to analyse the impact of extra mixing in the form of turbulent diffusion on the behaviour of the tu values. We conclude on the necessity of further investigations using models with a physically motivated implementation of extra mixing including additional constraints to further improve the accuracy with which the fundamental parameters of this system are determined., Comment: Accepted for publication in Astronomy & Astrophysics

Asteroseismology is a powerful tool to access the internal structure of stars. Apart from the important impact of theoretical developments, progress in this field has been commonly associated with the analysis of time-resolved observations. Recently, the so-called macroturbulent broadening has been proposed to be a complementary and less expensive way -- in terms of observational time -- to investigate pulsations in massive stars. We assess to what extent this ubiquitous non-rotational broadening component shaping the line profiles of O stars and B supergiants is a spectroscopic signature of pulsation modes driven by a heat mechanism. We compute stellar main sequence and post-main sequence models from 3 to 70Msun with the ATON stellar evolution code and determine the instability domains for heat-driven modes for degrees l=1-20 using the adiabatic and non-adiabatic codes LOSC and MAD. We use the observational material presented in Sim\'on-D\'iaz et al. (2016) to investigate possible correlations between the single snapshot line-broadening properties of a sample of ~260 O and B-type stars and their location inside/outside the various predicted instability domains. We present an homogeneous prediction for the non-radial instability domains of massive stars for degree l up to 20. We provide a global picture of what to expect from an observational point of view in terms of frequency range of excited modes, and investigate the behavior of the instabilities with stellar evolution and increasing degree of the mode. Furthermore, our pulsational stability analysis, once compared to the empirical results of Sim\'on-D\'iaz et al. (2016), indicates that stellar oscillations originated by a heat mechanism can not explain alone the occurrence of the large non-rotational line-broadening component commonly detected in the O star and B supergiant domain., Comment: 14 pages, 8 figures, Reproduced with permission from Astronomy & Astrophysics, \c{opyright} ESO

Determining accurate and precise stellar ages is a major problem in astrophysics. These determinations are either obtained through empirical relations or model-dependent approaches. Currently, seismic modelling is one of the best ways of providing accurate ages. However, current methods are affected by simplifying assumptions concerning mixing processes. In this context, providing new structural indicators which are less model-dependent and more sensitive to such processes is crucial. We build a new indicator for core conditions on the main sequence, which should be more sensitive to structural differences and applicable to older stars than the indicator t presented in a previous paper. We also wish to analyse the importance of the number and type of modes for the inversion, as well as the impact of various constraints and levels of accuracy in the forward modelling process that is used to obtain reference models for the inversion. First, we present a method to obtain new structural kernels and use them to build an indicator of central conditions in stars and test it for various effects including atomic diffusion, various initial helium abundances and metallicities, following the seismic inversion method presented in our previous paper. We then study its accuracy for 7 different pulsation spectra including those of 16CygA and 16CygB and analyse its dependence on the reference model by using different constraints and levels of accuracy for its selection We observe that the inversion of the new indicator using the SOLA method provides a good diagnostic for additional mixing processes in central regions of stars. Its sensitivity allows us to test for diffusive processes and chemical composition mismatch. We also observe that octupole modes can improve the accuracy of the results, as well as modes of low radial order., Comment: Accepted for publication in Astronomy and Astrophysics

Constraining mixing processes and chemical composition is a central problem in stellar physics as their impact on stellar age determinations leads to biases in our studies of stellar evolution, galactic history and exoplanetary systems. In two previous papers, we showed how seismic inversion techniques could offer strong constraints on such processes by pointing out weaknesses in theoretical models. We now apply our technique to the solar analogues 16CygA and 16CygB, being amongst the best targets in the Kepler field to test the diagnostic potential of seismic inversions. The combination of various seismic indicators helps to provide more constrained and accurate fundamendal parameters for these stars. We use the latest seismic, spectroscopic and interferometric observational constraints in the litterature for this system to determine reference models independently for both stars. We carry out seismic inversions of the acoustic radius, the mean density and a core conditions indicator. We note that a degeneracy exists for the reference models. Namely, changing the diffusion coefficient or the chemical composition within the observational values leads to 5% changes in mass, 3% changes in radius and up to 8% changes in age. We use acoustic radius and mean density inversions to improve our reference models then carry out inversions for a core conditions indicator. Thanks to its sensitivity to microscopic diffusion and chemical composition mismatches, we are able to reduce the mass dispersion to 2%, namely [0.96, 1.0] M_sun, the radius dispersion to 1%, namely [1.188, 1.200] R_sun and the age dispersion to 3%, namely [7.0, 7.4] Gy, for 16CygA. For 16CygB, we can check the consistency of the models but not reduce independently the age dispersion. Nonetheless, assuming consistency with the age of 16CygA helps to further constrain its mass and radius., Comment: Submitted to Astronomy and Astrophysics

The detection of mixed modes in subgiants and red giants by the CoRoT and \emph{Kepler} space-borne missions allows us to investigate the internal structure of evolved low-mass stars. In particular, the measurement of the mean core rotation rate as a function of the evolution places stringent constraints on the physical mechanisms responsible for the angular momentum redistribution in stars. It showed that the current stellar evolution codes including the modelling of rotation fail to reproduce the observations. An additional physical process that efficiently extracts angular momentum from the core is thus necessary. Our aim is to assess the ability of mixed modes to do this. To this end, we developed a formalism that provides a modelling of the wave fluxes in both the mean angular momentum and the mean energy equations in a companion paper. In this article, mode amplitudes are modelled based on recent asteroseismic observations, and a quantitative estimate of the angular momentum transfer is obtained. This is performed for a benchmark model of 1.3 $M_{\odot}$ at three evolutionary stages, representative of the evolved pulsating stars observed by CoRoT and Kepler. We show that mixed modes extract angular momentum from the innermost regions of subgiants and red giants. However, this transport of angular momentum from the core is unlikely to counterbalance the effect of the core contraction in subgiants and early red giants. In contrast, for more evolved red giants, mixed modes are found efficient enough to balance and exceed the effect of the core contraction, in particular in the hydrogen-burning shell. Our results thus indicate that mixed modes are a promising candidate to explain the observed spin-down of the core of evolved red giants, but that an other mechanism is to be invoked for subgiants and early red giants., Comment: Accepted in A&A, 7 pages, 8 figures

Seismic observations by the space-borne mission \emph{Kepler} have shown that the core of red giant stars slows down while evolving, requiring an efficient physical mechanism to extract angular momentum from the inner layers. Current stellar evolution codes fail to reproduce the observed rotation rates by several orders of magnitude, and predict a drastic spin-up of red giant cores instead. New efficient mechanisms of angular momentum transport are thus required. In this framework, our aim is to investigate the possibility that mixed modes extract angular momentum from the inner radiative regions of evolved low-mass stars. To this end, we consider the Transformed Eulerian Mean (TEM) formalism, introduced by Andrews \& McIntyre (1978), that allows us to consider the combined effect of both the wave momentum flux in the mean angular momentum equation and the wave heat flux in the mean entropy equation as well as their interplay with the meridional circulation. In radiative layers of evolved low-mass stars, the quasi-adiabatic approximation, the limit of slow rotation, and the asymptotic regime can be applied for mixed modes and enable us to establish a prescription for the wave fluxes in the mean equations. The formalism is finally applied to a $1.3 M_\odot$ benchmark model, representative of observed CoRoT and \emph{Kepler} oscillating evolved stars. We show that the influence of the wave heat flux on the mean angular momentum is not negligible and that the overall effect of mixed modes is to extract angular momentum from the innermost region of the star. A quantitative and accurate estimate requires realistic values of mode amplitudes. This is provided in a companion paper., Comment: Accepted in A&A, 11 pages, and 6 figures

CoRoT and Kepler observations of red giant stars revealed very rich spectra of non-radial solar-like oscillations. Of particular interest was the detection of mixed modes that exhibit significant amplitude, both in the core and at the surface of the stars. It opens the possibility of probing the internal structure from their inner-most layers up to their surface along their evolution on the red giant branch as well as on the red-clump. Our objective is primarily to provide physical insight into the physical mechanism responsible for mixed-modes amplitudes and lifetimes. Subsequently, we aim at understanding the evolution and structure of red giants spectra along with their evolution. The study of energetic aspects of these oscillations is also of great importance to predict the mode parameters in the power spectrum. Non-adiabatic computations, including a time-dependent treatment of convection, are performed and provide the lifetimes of radial and non-radial mixed modes. We then combine these mode lifetimes and inertias with a stochastic excitation model that gives us their heights in the power spectra. For stars representative of CoRoT and Kepler observations, we show under which circumstances mixed modes have heights comparable to radial ones. We stress the importance of the radiative damping in the determination of the height of mixed modes. Finally, we derive an estimate for the height ratio between a g-type and a p-type mode. This can thus be used as a first estimate of the detectability of mixed-modes.

A recent photometric survey in the NGC~3766 cluster led to the detection of stars presenting an unexpected variability. They lie in a region of the Hertzsprung-Russell (HR) diagram where no pulsation are theoretically expected, in between the $\delta$ Scuti and slowly pulsating B (SPB) star instability domains. Their variability periods, between $\sim$0.1--0.7~d, are outside the expected domains of these well-known pulsators. The NCG~3766 cluster is known to host fast rotating stars. Rotation can significantly affect the pulsation properties of stars and alter their apparent luminosity through gravity darkening. Therefore we inspect if the new variable stars could correspond to fast rotating SPB stars. We carry out instability and visibility analysis of SPB pulsation modes within the frame of the traditional approximation. The effects of gravity darkening on typical SPB models are next studied. We find that at the red border of the SPB instability strip, prograde sectoral (PS) modes are preferentially excited, with periods shifted in the 0.2--0.5~d range due to the Coriolis effect. These modes are best seen when the star is seen equator-on. For such inclinations, low-mass SPB models can appear fainter due to gravity darkening and as if they were located between the $\delta$~Scuti and SPB instability strips., Comment: 6 pages, 2 figures, to appear in the proceedings of the IAU Symposium 307, New windows on massive stars: asteroseismology, interferometry, and spectropolarimetry

We have computed a new grid of evolutionary subdwarf B star (sdB) models from the start of central He burning, taking into account atomic diffusion due to radiative levitation, gravitational settling, concentration diffusion, and thermal diffusion. We have computed the non-adiabatic pulsation properties of the models and present the predicted p-mode and g-mode instability strips. In previous studies of the sdB instability strips, artificial abundance enhancements of Fe and Ni were introduced in the pulsation driving layers. In our models, the abundance enhancements of Fe and Ni occur naturally, eradicating the need to use artificial enhancements. We find that the abundance increases of Fe and Ni were previously underestimated and show that the instability strip predicted by our simulations solves the so-called blue edge problem of the subdwarf B star g-mode instability strip. The hottest known g-mode pulsator, KIC 10139564, now resides well within the instability strip {even when only modes with low spherical degrees (l<=2) are considered., Comment: 7 pages, 7 figures. Accepted for publication in Astronomy & Astrophysics

The recent variability survey of the NGC 3766 cluster revealed a considerable number of periodic variable stars in a region of the H-R diagram where no pulsation is expected. This region lies between the instability strips of the delta Scuti and SPB stars. Moreover the periods of the new phenomenon, P~0.1-0.7 d, do not allow to associate it a priori to either of these two types of pulsations. Stars in the NGC 3766 cluster are known as fast rotators with rotational velocities typically larger than half of their critical velocity. Rotation can affect both the geometrical properties and period domain of pulsations. It also alters the apparent stellar luminosity through gravity darkening, effect seldom taken considered in theoretical studies of the rotation-pulsation interaction. We explore if both of these effects are able to deliver a consistent interpretation for the observed properties of the "new variables" in NGC 3766: explaining their presence outside the known instability strips and their variability periods. We carry out an instability analysis of SPB models within the framework of the Traditional Approximation of Rotation and study the visibility of modes according to the angle of view and rotation. We also check how gravity darkening affects the effective temperature and luminosity of stellar models for different angles of view and rotation velocities. At the red (cold) border of the instability strip, prograde sectoral modes are preferentially excited and their visibilities are maximum when seen equator-on. Furthermore low-mass SPB models seen equator-on can appear in the gap between non-rotating SPB and delta Scuti stars due to gravity darkening. In that case, periods of these most visible modes are shifted to the 0.2-0.5 d range due to the effects of the Coriolis force. We hence suggest that the new variable stars observed in NGC 3766 are actually fast rotating SPB pulsators., Comment: 8 pages, 4 figures, accepted for publication in A&A (this version does not include language editor corrections and abstract is shortened)

The CoRoT short asteroseismic runs give us the opportunity to observe a large variety of late-type stars through their solar-like oscillations. We report the observation and modeling of the F5V star HD 175272. Our aim is to define a method for extracting as much information as possible from a noisy oscillation spectrum. We followed a differential approach that consists of using a well-known star as a reference to characterize another star. We used classical tools such as the envelope autocorrelation function to derive the global seismic parameters of the star. We compared HD 175272 with HD 181420 through a linear approach, because they appear to be asteroseismic twins. The comparison with the reference star enables us to substantially enhance the scientific output for HD 175272. First, we determined its global characteristics through a detailed seismic analysis of HD 181420. Second, with our differential approach, we measured the difference of mass, radius and age between HD 175272 and HD 181420. We have developed a general method able to derive asteroseismic constraints on a star even in case of low-quality data. %This method is based on the comparison to a star with common seismic and classical properties. Seismic data allow accurate measurements of radii and masses differences between the two stars. This method can be applied to stars with interesting properties but low signal-to-noise ratio oscillation spectrum, such as stars hosting an exoplanet or members of a binary system., Comment: Accepted in A&A

The space missions CoRoT and Kepler provide high quality data that allow us to test the transport of angular momentum in stars by the seismic determination of the internal rotation profile. Our aim is to test the validity of the seismic diagnostics for red giants rotation that are based on a perturbative method and to investigate the oscillation spectra when the validity does not hold. We use a non-perturbative approach implemented in the ACOR code (Ouazzani et al. 2012) that accounts for the effect of rotation on pulsations, and solves the pulsation eigenproblem directly for dipolar oscillation modes. We find that the limit of the perturbation to first order can be expressed in terms of the rotational splitting compared to the frequency separation between consecutive dipolar modes. Above this limit, non-perturbative computations are necessary but only one term in the spectral expansion of modes is sufficient as long as the core rotation rate remains significantly smaller than the pulsation frequencies. Each family of modes with different azimuthal symmetry, m, has to be considered separately. In particular, in case of rapid core rotation, the density of the spectrum differs significantly from one m-family of modes to another, so that the differences between the period spacings associated with each m-family can constitute a promising guideline toward a proper seismic diagnostic for rotation., Comment: 5 pages, 5 figures, accepted for publication in A&A

Uncertainties on central mixing in main sequence (MS) and core He-burning (He-B) phases affect key predictions of stellar evolution such as late evolutionary phases, chemical enrichment, ages etc. We propose a test of the extension of extra-mixing in two relevant evolutionary phases based on period spacing Delta_P of solar-like oscillating giants. From stellar models and their corresponding adiabatic frequencies (respectively computed with ATON and LOSC codes) we provide the first predictions of the observable Delta_P for stars in the red giant branch (RGB) and in the red clump (RC). We find: i) a clear correlation between Delta_P and the mass of the helium core (M_He); the latter in intermediate-mass stars depends on the MS overshooting, hence it can be used to set constraints on extra mixing during MS when coupled with chemical composition; ii) a linear dependence of the average value of the asymptotic period spacing (_a) during the He-B phase on the size of the convective core. A first comparison with the inferred asymptotic period spacing for Kepler RC stars suggests the need for extra mixing also during this phase, as evinced from other observational facts., Comment: 19 pages, 8 figures, accepted for publication in ApJ

CoRoT and Kepler observations of red giants reveal rich spectra of non-radial solar-like oscillations allowing to probe their internal structure. We compare the theoretical spectrum of two red giants in the same region of the HR diagram but in different evolutionary phases. We present here our first results on the inertia, lifetimes and amplitudes of the oscillations and discuss the differences between the two stars., Comment: 40th Liege International Astrophysical Colloquium, 2 pages, 3 figures

We present and discuss results of a recently developped two dimensional non-perturbative method to compute accurate adiabatic oscillation modes of rapidly rotating stars . The 2D calculations fully take into account the centrifugal distorsion of the star while the non-perturbative method includes the full influence of the Coriolis acceleration. These characteristics allows us to compute oscillation modes of rapid rotators - from high order p-modes in $\delta$Scuti stars, to low order p- and g-modes in $\beta$ Cephei or Be stars., Comment: 4 pages, 1 figure, proceedings of the 4th HELAS International Conference, Lanzarote feb 2010, Astronomical Notes, 2010, 331, P 45

A new two dimensional non-perturbative code to compute accurate oscillation modes of rapidly rotating stars is presented. The 2D calculations fully take into account the centrifugal distorsion of the star while the non perturbative method includes the full influence of the Coriolis acceleration. This 2D non-perturbative code is used to study pulsational spectra of highly distorted evolved models of stars. 2D models of stars are obtained by a self consistent method which distorts spherically averaged stellar models a posteriori. We are also able to compute gravito-acoustic modes for the first time in rapidly rotating stars. We present the dynamics of pulsation modes in such models, and show regularities in their frequency spectra., Comment: 5 pages, 3 figures, proceedings of the 20th Stellar Pulsation Conference Series, Granada sept 2011

It is well known that asteroseismology is the unique technique permitting the study of the internal structure of pulsating stars using their pulsational frequencies, which is per se very important. It acquires an additional value when the star turns out to be a planet host. In this case, the asteroseismic study output may be a very important input for the study of the planetary system. With this in mind, we use the large time-span of the Kepler public data obtained for the star system HAT-P-7, first to perform an asteroseismic study of the pulsating star using Time-Dependent-Convection (TDC) models. Secondly, we make a revision of the planet properties in the light of the asteroseismic study., Comment: 4 pages, 2 figures, Published in the Stellar Pulsations, Astrophysics and Space Science Proceedings, Volume 31., p. 227, 2013

A growing number of solar-like oscillations has been detected in red giant stars thanks to CoRoT and Kepler space-crafts. The seismic data gathered by CoRoT on red giant stars allow us to test mode driving theory in physical conditions different from main-sequence stars. Using a set of 3D hydrodynamical models representative of the upper layers of sub- and red giant stars, we computed the acoustic mode energy supply rate (Pmax). Assuming adiabatic pulsations and using global stellar models that assume that the surface stratification comes from the 3D hydrodynamical models, we computed the mode amplitude in terms of surface velocity. This was converted into intensity fluctuations using either a simplified adiabatic scaling relation or a non-adiabatic one. From L and M (the luminosity and mass), the energy supply rate Pmax is found to scale as (L/M)^2.6 for both main-sequence and red giant stars, extending previous results. The theoretical amplitudes in velocity under-estimate the Doppler velocity measurements obtained so far from the ground for red giant stars by about 30%. In terms of intensity, the theoretical scaling law based on the adiabatic intensity-velocity scaling relation results in an under-estimation by a factor of about 2.5 with respect to the CoRoT seismic measurements. On the other hand, using the non-adiabatic intensity-velocity relation significantly reduces the discrepancy with the CoRoT data. The theoretical amplitudes remain 40% below, however, the CoRoT measurements. Our results show that scaling relations of mode amplitudes cannot be simply extended from main-sequence to red giant stars in terms of intensity on the basis of adiabatic relations because non-adiabatic effects for red giant stars are important and cannot be neglected. We discuss possible reasons for the remaining differences., Comment: 9 pages, 5 figures, accepted for publication in Astronomy & Astrophysics ; updated references, language improvement, figure 2 rescaled

Space-borne missions CoRoT and {\it Kepler} are providing a rich harvest of high-quality constraints on solar-like pulsators. Among the seismic parameters, mode damping rates remains poorly understood and thus barely used to infer physical properties of stars. Nevertheless, thanks to CoRoT and {\it Kepler} space-crafts it is now possible to measure damping rates for hundreds of main-sequence and thousands of red-giant stars with an unprecedented precision. By using a non-adiabatic pulsation code including a time-dependent convection treatment, we compute damping rates for stellar models representative for solar-like pulsators from the main-sequence to the red-giant phase. This allows us to reproduce the observations of both CoRoT and {\it Kepler}, which validates our modeling of mode damping rates and thus the underlying physical mechanisms included in the modeling. Actually, by considering the perturbations of turbulent pressure and entropy (including perturbation of the dissipation rate of turbulent energy into heat) by the oscillation in our computation, we succeed in reproducing the observed relation between damping rates and effective temperature. Moreover, we discuss the physical reasons for mode damping rates to scale with effective temperature, as observationally exhibited. Finally, this opens the way for the use of mode damping rates to probe turbulent convection in solar-like stars., Comment: 4 pages, 5 figures, Accepted in A&A

The B-type pulsators known as \beta Cephei and Slowly Pulsating B (SPB) stars present pulsations driven by the \kappa mechanism, which operates thanks to an opacity bump due to the iron group elements. In low-metallicity environments such as the Magellanic Clouds, \beta Cep and SPB pulsations are not expected. Nevertheless, recent observations show evidence for the presence of B-type pulsator candidates in both galaxies. We seek an explanation for the excitation of \beta Cep and SPB modes in those galaxies by examining basic input physics in stellar modelling: i) the specific metal mixture of B-type stars in the Magellanic Clouds; ii) the role of a potential underestimation of stellar opacities. We first derive the present-day chemical mixtures of B-type stars in the Magellanic Clouds. Then, we compute stellar models for that metal mixture and perform a non-adiabatic analysis of these models. In a second approach, we simulate parametric enhancements of stellar opacities due to different iron group elements. We then study their effects in models of B stars and their stability. We find that adopting a representative chemical mixture of B stars in the Small Magellanic Cloud cannot explain the presence of B-type pulsators there. An increase of the opacity in the region of the iron-group bump could drive B-type pulsations, but only if this increase occurs at the temperature corresponding to the maximum contribution of Ni to this opacity bump. We recommend an accurate computation of Ni opacity to understand B-type pulsators in the Small Magellanic Cloud, as well as the frequency domain observed in some Galactic hybrid \beta Cep-SPB stars., Comment: 16 pages, 12 figures. Accepted for publication in MNRAS

Adiabatic modeling of solar-like oscillations cannot exceed a certain level of precision for fitting individual frequencies. This is known as the problem of near surface effects on the mode physics. We present a theoretical study which addresses the problem of frequency precision in non-adiabatic models using a time-dependent convection treatment. We find that the number of acceptable model solutions is significantly reduced and more precise constraints can be imposed on the models. Results obtained for a specific star (beta Hydri) lead to very good agreement with both global and local seismic observables. This indicates that the accuracy of model fitting to seismic data is greatly improved when a more complete description of the interaction between convection and pulsation is taken into account., Comment: 4 pages, 2 figures. To be published in Astrophysics and Space Science Proceedings series (ASSP). Proceedings of the "20th Stellar Pulsation Conference Series: Impact of new instrumentation and new insights in stellar pulsations", 5-9 September 2011, Granada, Spain

The CoRoT mission has provided thousands of red-giant light curves. The analysis of their solar-like oscillations allows us to characterize their stellar properties. Up to now, the global seismic parameters of the pressure modes remain unable to distinguish red-clump giants from members of the red-giant branch. As recently done with Kepler red giants, we intend to analyze and use the so-called mixed modes to determine the evolutionary status of the red giants observed with CoRoT. We also aim at deriving different seismic characteristics depending on evolution. The complete identification of the pressure eigenmodes provided by the red-giant universal oscillation pattern allows us to aim at the mixed modes surrounding the l=1 expected eigenfrequencies. A dedicated method based on the envelope autocorrelation function is proposed to analyze their period separation. We have identified the mixed-mode signature separation thanks to their pattern compatible with the asymptotic law of gravity modes. We have shown that, independent of any modelling, the g-mode spacings help to distinguish the evolutionary status of a red-giant star. We then report different seismic and fundamental properties of the stars, depending on their evolutionary status. In particular, we show that high-mass stars of the secondary clump present very specific seismic properties. We emphasize that stars belonging to the clump were affected by significant mass loss. We also note significant population and/or evolution differences in the different fields observed by CoRoT.

Asteroseismology of stars that exhibit solar-like oscillations are enjoying a growing interest with the wealth of observational results obtained with the CoRoT and Kepler missions. In this framework, scaling laws between asteroseismic quantities and stellar parameters are becoming essential tools to study a rich variety of stars. However, the physical underlying mechanisms of those scaling laws are still poorly known. Our objective is to provide a theoretical basis for the scaling between the frequency of the maximum in the power spectrum ($\nu_{\rm max}$) of solar-like oscillations and the cut-off frequency ($\nu_{\rm c}$). Using the SoHO GOLF observations together with theoretical considerations, we first confirm that the maximum of the height in oscillation power spectrum is determined by the so-called \emph{plateau} of the damping rates. The physical origin of the plateau can be traced to the destabilizing effect of the Lagrangian perturbation of entropy in the upper-most layers which becomes important when the modal period and the local thermal relaxation time-scale are comparable. Based on this analysis, we then find a linear relation between $\nu_{\rm max}$ and $\nu_{\rm c}$, with a coefficient that depends on the ratio of the Mach number of the exciting turbulence to the third power to the mixing-length parameter., Comment: 8 pages, 11 figures. Accepted in A&A

Context. gamma Doradus (gamma Dor) are late A and F-type stars pulsating with high order gravity modes (g-modes). The existence of different evolutionary phases crossing the gamma Dor instability strip raises the question of the existence of pre-main sequence (PMS) gamma Dor stars. Aims. We intend to study the differences between the asteroseismic behaviour of PMS and main sequence (MS) gamma Dor pulsators as it is predicted by the current theory of stellar evolution and stability. Methods. We explore the adiabatic and non-adiabatic properties of high order g-modes in a grid of PMS and MS models covering the mass range 1.2 Msun < Mstar < 2.5 Msun. Results. We derive the theoretical instability strip (IS) for the PMS gamma Dor pulsators. This IS covers the same effective temperature range as the MS gamma Dor one. Nevertheless, the frequency domain of unstable modes in PMS models with a fully radiative core is larger than in MS models, even if they present the same number of unstable modes. Moreover, the differences between MS and PMS internal structures are reflected on the average values of the period spacing as well as on the dependence of the period spacing on the radial order of the modes, opening the window to the determination of the evolutionary phase of gamma Dor stars from their pulsation spectra., Comment: 9 pages, 17 figures, accepted for publication in A&A

Slowly Pulsating B and $\beta$ Cephei are $\kappa$ mechanism driven pulsating B stars. That $\kappa$ mechanism works since a peak in the opacity due to a high number of atomic transitions from iron-group elements occurs in the area of $\log T \approx 5.3$. Theoretical results predict very few SPBs and no $\beta$ Cep to be encountered in low metallicity environments such as the Small Magellanic Cloud. However recent variability surveys of B stars in the SMC reported the detection of a significant number of SPB and $\beta$ Cep candidates. Though the iron content plays a major role in the excitation of $\beta$ Cep and SPB pulsations, the chemical mixture representative of the SMC B stars such as recently derived does not leave room for a significant increase of the iron abundance in these stars. Whilst abundance of iron-group elements seems reliable, is the opacity in the iron-group elements bump underestimated? We determine how the opacity profile in B-type stars should change to excite SPB and $\beta$ Cep pulsations in early-type stars of the SMC., Comment: 5 pages, 7 figures, to appear under electronic form in : Proceedings of the 4th HELAS International Conference: Seismological Challenges for Stellar Structure

The question of the existence of pre-main sequence (PMS) $\gamma$~Doradus ($\gamma$~Dor) has been raised by the observations of young clusters such as NGC~884 hosting $\gamma$~Dor members. We have explored the properties of $\gamma$~Dor type pulsations in a grid of PMS models covering the mass range $1.2 M_\odot < M_* < 2.5 M_\odot$ and we derive the theoretical instability strip (IS) for the PMS $\gamma$~Dor pulsators. We explore the possibility of distinguishing between PMS and MS $\gamma$~Dor by the behaviour of the period spacing of their high order $gravity$-modes ($g$-modes)., Comment: 5 pages, 6 figures, Proc. HELAS IV Conference, Lanzarote, February 2010. Eds T. Roca Cort\'es, P. Pall\'e and S. Jim\'enez Reyes. Accepted in Astron. Nach

We aim to interpret the photometric and spectroscopic variability of the luminous blue variable supergiant HD\,50064 ($V=8.21$).CoRoT space photometry and follow-up high-resolution spectroscopy, with a time base of 137\,d and 169\,d, respectively, was gathered, analysed and interpreted using standard time series analysis and light curve modelling methods as well as spectral line diagnostics.The space photometry reveals one period of 37\,d, which undergoes a sudden amplitude change with a factor 1.6. The pulsation period is confirmed in the spectroscopy, which additionally reveals metal line radial velocity values differing by $\sim 30\,$km\,s$^{-1}$ depending on the spectral line and on the epoch. We estimate \teff$\sim$13\,500\,K, \logg$\sim$1.5 from the equivalent width of Si lines. The Balmer lines reveal that the star undergoes episodes of changing mass loss on a time scale similar to the changes in the photometric and spectroscopic variability, with an average value of $\log\dot{\rm M}\simeq-5$ (in M$_\odot$\,yr$^{-1}$). We tentatively interpret the 37\,d period as due to a strange mode oscillation., Comment: 4 pages, accepted for publication in Astronomy & Astrophysics Letters

A 5-night asteroseismic observation of the F8V star HD 203608 was conducted in August 2006 with HARPS, followed by an analysis of the data, and a preliminary modeling of the star (Mosser et al. 2008). The stellar parameters were significantly constrained, but the behavior of one of the seismic indexes (the small spacing d01) could not be fitted with the observed one, even with the best considered models. We study the possibility of improving the agreement between models and observations by changing the physical properties of the inner parts of the star (to which d01 is sensitive). We show that, in spite of its low mass, it is possible to produce models of HD 203608 with a convective core. No such model was considered in the preliminary modeling. In practice, we obtain these models here by assuming some extra mixing at the edge of the early convective core. We optimize the model parameters using the Levenberg-Marquardt algorithm. The agreement between the new best model with a convective core and the observations is much better than for the models without. All the observational parameters are fitted within 1-sigma observational error bars. This is the first observational evidence of a convective core in an old and low-mass star such as HD 203608. In standard models of low-mass stars, the core withdraws shortly after the ZAMS. The survival of the core until the present age of HD 203608 provides very strong constraints on the size of the mixed zone associated to the convective core. Using overshooting as a proxy to model the processes of transport at the edge of the core, we find that to reproduce both global and seismic observations, we must have alpha_ov = 0.17 +/- 0.03 Hp for HD 203608. We revisit the process of the extension of the core lifetime due to overshooting in the particular case of HD 203608., Comment: 7 pages, 5 figures Accepted in A&A