Search

We measure the average spin of $^{144}$Ba, a common fragment produced in $^{252}$Cf(sf), as a function of the total kinetic energy (TKE). We combined for the first time a twin Frisch-gridded ionization chamber with a world-class $\gamma$-ray spectrometer that was designed to measure high-multiplicity $\gamma$-ray events, Gammasphere. The chamber, loaded with a $^{252}$Cf(sf) source, provides a fission trigger, the TKE of the fragments, the approximate fragment masses, and the polar angle of the fission axis. Gammasphere provides the total $\gamma$-ray yield, fragment identification through the tagging of decay $\gamma$ rays, and the feeding of rotational bands in the fragments. We determine the dependence of the average spin of $^{144}$Ba on the fragments' TKE by correlating the fragment properties with the distribution of discrete levels that are fed. We find that the average spin only changes by about $0.5$ $\hbar$ across the TKE range of 158-203 MeV. The virtual independence of the spin on TKE suggests that spin is not solely generated through the statistical excitation of rotational modes, and more complex mechanisms are required., Comment: Accepted for publication in Phys. Rev. C

Recent theoretical and experimental results have brought renewed interest and focus on the topic of fission fragment angular momentum. Measurements of neutrons and $\gamma$ rays in coincidence with fission fragments remain the most valuable tool in the exploration of fission physics. To achieve these scientific goals, we have developed a system that combines a state-of-the-art fission fragment detector and $n$-$\gamma$ radiation detectors. A new twin Frisch-gridded ionization chamber has been designed and constructed for use with a spontaneous fission source and an array of forty \textit{trans}-stilbene organic scintillators (FS-3) at Argonne National Laboratory. The new ionization chamber design we present in this work aims at minimizing particle attenuation in the chamber walls, and provides a compact apparatus that can be fit inside existing experimental systems. The ionization chamber is capable of measuring fission fragment masses and kinetic energies, whereas the FS-3 provides neutron and gamma-ray multiplicities and spectra. The details of both detector assembly are presented along with the first experimental results of this setup. Planned event-by-event analysis and future experiments are briefly discussed., Comment: 7 pages, 10 figures

Neutron-induced fission of $^{237}$Np has been measured over a wide range of incident neutron energies using a twin Frisch-gridded ionization chamber (TFGIC) and a thin-backed $^{237}$Np target. These measurements were performed at the Los Alamos Neutron Science Center - Weapons Neutron Research (LANSCE - WNR) facility, which provides a collimated beam of neutrons with energies ranging from 100s of keV to 100s of MeV. The data were analyzed using the double-energy ($2E$) method, with mass-dependent corrections for prompt-fission neutrons and pulse height defect. Pre- and post-neutron evaporation average total kinetic energy ($\langle TKE\rangle$) values are reported for 54 incident neutron energies in the energy range $0.20 \le E_n \le 100.0$ MeV and compared to existing data and evaluations. Pre- and post-neutron evaporation mass yields were extracted with a full width at half maximum (FWHM) resolution of 4u and compared to existing data and evaluations. The present $\langle TKE\rangle$ and mass yield data agree with previous results and also with statistical models of $^{237}$Np$(n,f)$ at incident neutron energies between $E_n = 0.2 - 20.0$ MeV. A flattening of the $\langle TKE\rangle$ data is observed (relative to the prediction of the GEF model) above $E_n = 20.0$ MeV. However, the interpretation of this discrepancy is unclear as the analysis method's neglect of incomplete momentum transfer at high energies, as well as pre-equilibrium pre-fission phenomena likely have a significant impact on the measurement at such high incident neutron energies., Comment: 28 pages, 13 captioned figures, 4 tables, submitted to Journal of Physics G

The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration has performed measurements with a fission time projection chamber (fissionTPC) to study the fission process by reconstructing full three-dimensional tracks of fission fragments and other ionizing radiation. The amount of linear momentum imparted to the fissioning nucleus by the incident neutron can be inferred by measuring the opening angle between the fission fragments. Using this measured linear momentum, fission fragment angular distributions can be converted to the center-of-mass frame for anisotropy measurements. Angular anisotropy is an important experimental observable for understanding the quantum mechanical state of the fissioning nucleus and vital to determining detection efficiency for cross section measurements. Neutron linear momentum transfer to fissioning $^{235}$U, $^{238}$U, and $^{239}$Pu and fission fragment angular anisotropy of $^{235}$U and $^{238}$U as a function of neutron energies in the range 130 keV--250 MeV are presented.

The normalized $^{238}$U(n,f)/$^{235}$U(n,f) cross section ratio has been measured using the NIFFTE fission Time Projection Chamber from the reaction threshold to $30$~MeV. The fissionTPC is a two-volume MICROMEGAS time projection chamber that allows for full three-dimensional reconstruction of fission-fragment ionization profiles from neutron-induced fission. The measurement was performed at the Los Alamos Neutron Science Center, where the neutron energy is determined from neutron time-of-flight. The $^{238}$U(n,f)/$^{235}$U(n,f) ratio reported here is the first cross section measurement made with the fissionTPC, and will provide new experimental data for evaluation of the $^{238}$U(n,f) cross section, an important standard used in neutron-flux measurements. Use of a development target in this work prevented the determination of an absolute normalization, to be addressed in future measurements. Instead, the measured cross section ratio has been normalized to ENDF/B-VIII.$\beta$5 at 14.5 MeV.

Fission fragment angular distributions can provide an important constraint on fission theory, improving predictive fission codes, and are a prerequisite for a precise ratio cross section measurement. Available anisotropy data is sparse, especially at neutron energies above 5 MeV. For the first time, a three-dimensional tracking detector is employed to study fragment emission angles and provide a direct measurement of angular anisotropy. The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) collaboration has deployed the fission time projection chamber (fissionTPC) to measure nuclear data with unprecedented precision. The fission fragment anisotropy of $^{235}$U has been measured over a wide range of incident neutron energies from 180 keV to 200 MeV; a careful study of the systematic uncertainties complement the data., Comment: 10 pages, 12 figures, accepted to Physical Review C

The fission Time Projection Chamber (fissionTPC) is a compact (15 cm diameter) two-chamber MICROMEGAS TPC designed to make precision cross section measurements of neutron-induced fission. The actinide targets are placed on the central cathode and irradiated with a neutron beam that passes axially through the TPC inducing fission in the target. The 4$\pi$ acceptance for fission fragments and complete charged particle track reconstruction are powerful features of the fissionTPC which will be used to measure fission cross sections and examine the associated systematic errors. This paper provides a detailed description of the design requirements, the design solutions, and the initial performance of the fissionTPC.

The general properties needed in targets (sources) for high precision, high accuracy measurements are reviewed. The application of these principles to the problem of developing targets for the Fission TPC is described. Longer term issues, such as the availability of actinide materials, improved knowledge of energy losses and straggling and the stability of targets during irradiation are also discussed.