Search

In-vessel components are important parts of the EAST superconducting tokamak. They include the plasma facing components, passive plates, cryo-pumps, in-vessel coils, etc. The structural design, analysis and related R&D have been completed. The divertor is designed in an up-down symmetric configuration to accommodate both double null and single null plasma operation. Passive plates are used for plasma movement control. In-vessel coils are used for the active control of plasma vertical movements. Each cryo-pump can provide an approximately 45 m3/s pumping rate at a pressure of 10−1 Pa for particle exhaust. Analysis shows that, when a plasma current of 1 MA disrupts in 3 ms, the EM loads caused by the eddy current and the halo current in a vertical displacement event (VDE) will not generate an unacceptable stress on the divertor structure. The bolted divertor thermal structure with an active cooling system can sustain a load of 2 MW/m2 up to a 60 s operation if the plasma facing surface temperature is limited to 1500 °C. Thermal testing and structural optimization testing were conducted to demonstrate the analysis results.

EAST (experimental advanced superconducting tokamak) is an advanced steady-state plasma physics experimental device, which is being constructed as the Chinese National Nuclear Fusion Research Project. During the plasma operation the vacuum vessel as one of the key component will withstand the electromagnetic force due to the plasma disruption, the Halo current and the toroidal field coil quench, the pressure of boride water and the thermal load due to 250 oC baking by pressurized nitrogen gas. In this paper a report of the static and dynamic mechanical analyses of the vacuum vessel is made. Firstly the applied loads on the vacuum vessel were given and the static stress distribution under the gravitational loads, the pressure loads, the electromagnetic loads and thermal loads were investigated. Then a series of primary dynamic, buckling and fatigue life analyses were performed to predict the structure's dynamic behavior. A seismic analysis was also conducted.

The vacuum vessel of the HT-7U superconducting tokamak will be a fully-welded structure with a double-wall. The space between the double-wall will be filled with borated water for neutron shielding. Non-circular cross-section is designed for plasma elongating. Horizontal and vertical ports are designed for diagnosing, vacuum pumping, plasma heating and plasma current driving, etc. The vacuum vessel consists of 16 segments. It will be baked out at 250°C to obtain a clean wall. When the machine is in operation, both the hot wall (the wall temperature is around 100°C) and the cold wall (wall temperature is in normal equilibrium) are considered. The stress caused by thermal deformation and the electromagnetic (EM) loads caused by 1.5 MA plasma disruption in 3.5 T magnetic field have to be taken into account in the design of the HT-7U vacuum vessel. Finite element method was employed for structure analysis of the vacuum vessel.

We studied Chinese psychiatrists' understanding of gambling addiction, as well as their experiences of and confidence in assessing and treating these patients. To this end, we carried out a postal questionnaire survey of 110 psychiatrists working in China. A majority had seen people with gambling addiction in their practice but only 1 of the 110 psychiatrists had ever received any training in the management of the condition. A large majority of psychiatrists indicated that gambling addiction was an important public health problem and 71.8% said they would like to be more involved in its management. Much more needs to be done to improve the identification and treatment of gambling addiction in China.