Search

Unconstrained by Lorentz reciprocity, nonreciprocal metasurfaces are uniquely capable of encoding distinctive optical functions on forward- and backward-propagating waves. The nonreciprocal metasurfaces reported to date require external electric or magnetic field biasing or rely on nonlinear effects, both of which are challenging to practically implement. Here, we propose and experimentally realize a magnet-free, linear, and passive nonreciprocal metasurface based on self-biased magnetic meta-atoms. Record transmittance up to 77% and operation angle reaching 64 degree are experimentally demonstrated. Moreover, on-demand bidirectional phase modulation in a "LEGO-like" manner is theoretically proposed and experimentally demonstrated, enabling a cohort of nonreciprocal functionalities such as microwave isolation, nonreciprocal beam steering, nonreciprocal focusing, and nonreciprocal holography. The design can also be extended to MHz and optical frequencies, taking advantage of the wide variety of self-biased gyrotropic materials available. We foresee that the nonreciprocal metasurfaces demonstrated in this work will have a significant practical impact for applications ranging from nonreciprocal antennas and radomes to full-duplex wireless communication and radar systems., Comment: 18 pages, 5 figures

Efficient fiber-to-chip coupling has been a major hurdle to cost-effective packaging and scalable interconnections of photonic integrated circuits. Conventional photonic packaging methods relying on edge or grating coupling are constrained by high insertion losses, limited bandwidth density, narrow band operation, and sensitivity to misalignment. Here we present a new fiber-to-chip coupling scheme based on free-form reflective micro-optics. A design approach which simplifies the high-dimensional free-form optimization problem to as few as two full-wave simulations is implemented to empower computationally efficient design of high-performance free-form reflectors while capitalizing on the expanded geometric degrees of freedom. We demonstrated fiber array coupling to waveguides taped out through a standard foundry shuttle run and backend integrated with 3-D printed micro-optics. A low coupling loss down to 0.5 dB was experimentally measured at 1550 nm wavelength with a record 1-dB bandwidth of 300 nm spanning O to U bands. The coupling scheme further affords large alignment tolerance, high bandwidth density and solder reflow compatibility, qualifying it as a promising optical packaging solution for applications such as wavelength division multiplexing communications, broadband spectroscopic sensing, and nonlinear optical signal processing.

Energy-efficient programmable photonic integrated circuits (PICs) are the cornerstone of on-chip classical and quantum optical technologies. Optical phase shifters constitute the fundamental building blocks which enable these programmable PICs. Thus far, carrier modulation and thermo-optical effect are the chosen phenomena for ultrafast and low-loss phase shifters, respectively; however, the state and information they carry are lost once the power is turned off-they are volatile. The volatility not only compromises energy efficiency due to their demand for constant power supply, but also precludes them from emerging applications such as in-memory computing. To circumvent this limitation, we introduce a novel phase shifting mechanism that exploits the nonvolatile refractive index modulation upon structural phase transition of Sb$_{2}$Se$_{3}$, a bi-stable transparent phase change material. A zero-static power and electrically-driven phase shifter was realized on a foundry-processed silicon-on-insulator platform, featuring record phase modulation up to 0.09 $\pi$/$\mu$m and a low insertion loss of 0.3 dB/$\pi$, which can be further improved upon streamlined design. We also pioneered a one-step partial amorphization scheme to enhance the speed and energy efficiency of PCM devices. A diverse cohort of programmable photonic devices were demonstrated based on the ultra-compact PCM phase shifter., Comment: 15 pages with 6 figures and 1 table

We present measurements of the Faraday effect in n-type InSb. The Verdet coefficient was determined for a range of carrier concentrations near $10^{17}$ $\text{cm}^{-3}$ in the $\lambda$ = 8 $\mu$m - 12 $\mu$m long-wave infrared regime. The absorption coefficient was measured and a figure of merit calculated for each sample. From these measurements, we calculated the carrier effective mass and illustrate the variation of the figure of merit with wavelength. A method for creating a tunable bandpass filter via the Faraday rotation is discussed along with preliminary results from a prototype device., Comment: 14 pages, 14 figures

With a two-layer contact-dispersion model and data in China, we analyze the cost-effectiveness of three types of antiepidemic measures for COVID-19: regular epidemiological control, local social interaction control, and inter-city travel restriction. We find that: 1) intercity travel restriction has minimal or even negative effect compared to the other two at the national level; 2) the time of reaching turning point is independent of the current number of cases, and only related to the enforcement stringency of epidemiological control and social interaction control measures; 3) strong enforcement at the early stage is the only opportunity to maximize both antiepidemic effectiveness and cost-effectiveness; 4) mediocre stringency of social interaction measures is the worst choice. Subsequently, we cluster countries/regions into four groups based on their control measures and provide situation assessment and policy suggestions for each group.

Active metasurfaces, whose optical properties can be modulated post-fabrication, have emerged as an intensively explored field in recent years. The efforts to date, however, still face major performance limitations in tuning range, optical quality, and efficiency especially for non mechanical actuation mechanisms. In this paper, we introduce an active metasurface platform combining phase tuning covering the full 2$\pi$ range and diffraction-limited performance using an all-dielectric, low-loss architecture based on optical phase change materials (O-PCMs). We present a generic design principle enabling switching of metasurfaces between two arbitrary phase profiles and propose a new figure-of-merit (FOM) tailored for active meta-optics. We implement the approach to realize a high-performance varifocal metalens operating at 5.2 $\mu$m wavelength. The metalens is constructed using Ge2Sb2Se4Te1 (GSST), an O-PCM with a large refractive index contrast ($\Delta$ n > 1) and unique broadband low-loss characteristics in both amorphous and crystalline states. The reconfigurable metalens features focusing efficiencies above 20% at both states for linearly polarized light and a record large switching contrast ratio of 29.5 dB. We further validated aberration-free imaging using the metalens at both optical states, which represents the first experimental demonstration of a non-mechanical active metalens with diffraction-limited performance.

Integrated optical isolators have been a longstanding challenge for photonic integrated circuits (PIC). An ideal integrated optical isolator for PIC should be made by a monolithic process, have a small footprint, exhibit broadband and polarization-diverse operation, and be compatible with multiple materials platforms. Despite significant progress, the optical isolators reported so far do not meet all these requirements. In this article we present monolithically integrated broadband magneto-optical isolators on silicon and silicon nitride (SiN) platforms operating for both TE and TM modes with record high performances, fulfilling all the essential characteristics for PIC applications. In particular, we demonstrate fully-TE broadband isolators by depositing high quality magneto-optical garnet thin films on the sidewalls of Si and SiN waveguides, a critical result for applications in TE-polarized on-chip lasers and amplifiers. This work demonstrates monolithic integration of high performance optical isolators on chip for polarization-diverse silicon photonic systems, enabling new pathways to impart nonreciprocal photonic functionality to a variety of integrated photonic devices.

Optical phase change materials (O-PCMs), a unique group of materials featuring drastic optical property contrast upon solid-state phase transition, have found widespread adoption in photonic switches and routers, reconfigurable meta-optics, reflective display, and optical neuromorphic computers. Current phase change materials, such as Ge-Sb-Te (GST), exhibit large contrast of both refractive index (delta n) and optical loss (delta k), simultaneously. The coupling of both optical properties fundamentally limits the function and performance of many potential applications. In this article, we introduce a new class of O-PCMs, Ge-Sb-Se-Te (GSST) which breaks this traditional coupling, as demonstrated with an optical figure of merit improvement of more than two orders of magnitude. The first-principle computationally optimized alloy, Ge2Sb2Se4Te1, combines broadband low optical loss (1-18.5 micron), large optical contrast (delta n = 2.0), and significantly improved glass forming ability, enabling an entirely new field of infrared and thermal photonic devices. We further leverage the material to demonstrate nonvolatile integrated optical switches with record low loss and large contrast ratio, as well as an electrically addressed, microsecond switched pixel level spatial light modulator, thereby validating its promise as a platform material for scalable nonvolatile photonics., Comment: 16 pages, 6 figures

The mid-infrared (mid-IR) is a strategically important band for numerous applications ranging from night vision to biochemical sensing. Unlike visible or near-infrared optical parts which are commonplace and economically available off-the-shelf, mid-IR optics often requires exotic materials or complicated processing, which accounts for their high cost and inferior quality compared to their visible or near-infrared counterparts. Here we theoretically analyzed and experimentally realized a Huygens metasurface platform capable of fulfilling a diverse cross-section of optical functions in the mid-IR. The meta-optical elements were constructed using high-index chalcogenide films deposited on fluoride substrates:the choices of wide-band transparent materials allow the design to be scaled across a broad infrared spectrum. Capitalizing on a novel two-component Huygens' meta-atom design, the meta-optical devices feature an ultra-thin profile ($\lambda_0/8$ in thickness, where $\lambda_0$ is the free-space wavelength) and measured optical efficiencies up to 75% in transmissive mode, both of which represent major improvements over state-of-the-art. We have also demonstrated, for the first time, mid-IR transmissive meta-lenses with diffraction-limited focusing and imaging performance. The projected size, weight and power advantages, coupled with the manufacturing scalability leveraging standard microfabrication technologies, make the Huygens meta-optical devices promising for next-generation mid-IR system applications., Comment: 30 pages, 17 figures, 1 tables