Search

Frequency synchronization error, as one of the inevitable technical challenges in distributed synthetic aperture radar (SAR), has different impacts on different SAR systems. Multi-monostatic SAR is a typical distributed configuration where frequency synchronization errors are tiny in distributed airborne and low earth orbit (LEO) SAR systems. However, due to the long time delay and long synthetic aperture time, the imaging performance of a multi-monostatic geosynchronous (GEO) SAR system is affected by frequency oscillator errors. In this paper, to investigate the frequency synchronization problem in this configuration, we firstly model the echo signals with the frequency synchronization errors, which can be divided into fixed frequency errors and random phase noise. Secondly, we talk about the impacts of the two kinds of errors on imaging performance. To solve the problem, we thirdly propose an autofocus back-projection (ABP) algorithm, which adopts the coordinate descent method and iteratively adjusts the phase error estimation until the image reaches its maximum sharpness. Based on the characteristics of the frequency synchronization errors, we further propose the Node ABP (NABP) algorithm, which greatly reduces the amount of storage and computation compared to the ABP algorithm. Finally, simulations are carried out to validate the effectiveness of the ABP and NABP algorithms. [ABSTRACT FROM AUTHOR]

Due to significant electromagnetic interference, radar interruptions, and other factors, Azimuth Missing Data (AMD) may occur in Synthetic Aperture Radar (SAR) echo, resulting in severe defocusing and even false targets. An important approach to solving this problem is to utilize Compressed Sensing (CS) methods on AMD echo to reconstruct complete echo, which can be abbreviated as the AMD Imaging Algorithm (AMDIA). However, the State-of-the-Art AMDIA (SOA-AMDIA) do not consider the influence of motion phase errors, resulting in an unacceptable estimation error of the complete echo reconstruction. Therefore, in order to enhance the practical applicability of AMDIA, this article proposes an improved AMDIA using Sparse Representation Autofocusing (SRA-AMDIA). The proposed SRA-AMDIA aims to accurately focus the imaging result, even in the Phase Error AMD (PE-AMD) echo case. Firstly, a Phase-Compensation Function (PCF) based on the phase history of the scene centroid is designed. When the PCF is multiplied with the PE-AMD echo in the range-frequency domain, a coarse-focused sparse representation signal can be obtained in the range-Doppler domain. However, due to the influence of unknown PE, the sparsity of this sparse representation signal is unsatisfying, breaking the sparse constraints requirement of the CS method. Therefore, we introduced a minimum entropy autofocusing algorithm to autofocus this sparse representation signal. Next, the estimated PE is compensated for this sparse representation signal, and a more sparse representation signal is obtained. Hence, the non-PE complete echo can be reconstructed. Finally, the estimated complete echo can be used with classic imaging algorithms to obtain high-resolution imaging results under the PE-AMD condition. Simulation and real measured data have verified the effectiveness of the proposed SRA-AMDIA. [ABSTRACT FROM AUTHOR]

In the urban environment, the radar is easily affected by multipath (MP) returns. The problem of detecting point‐like targets in the urban environment with the existence of resolvable MP returns under the background of heterogeneous clutter is addressed. Two adaptive detectors have been devised with a combination of prior information on the environment and echoes of target. The detectors can use the MP echoes in all MP prediction range cells for detection or in some available paths for signal detection by the available path selection algorithm that eliminates the weak signal propagation paths. Remarkably, the proposed decision schemes exhibit the desirable constant false alarm rate property with respect to the unknown parameters of the heterogeneous interference. The performance assessment, conducted on simulated data in terms of detection probability also in comparison with conventional solutions, highlights the effectiveness of the MP exploitation, while the MP signal is strong and shows the detection performance enhancement potential. [ABSTRACT FROM AUTHOR]