Search

The present study focuses on establishing the quality assurance of laboratories for recent infections (RTRI) in Thailand. We developed a cold-chain independent method, using fully characterized plasma obtained from the Thai Red Cross Society, and prepared as dried tube specimens (DTS). Twenty microliters of HIV-seronegative, recent, and long-term infected samples were aliquoted into individual tubes and dried at room temperature, 20–30 degrees Celsius, in a biosafety cabinet overnight to ensure optimal preservation. The DTS external quality control and external quality assessment were tested for homogeneity and stability following the ISO/Guide 35 guidelines. The DTS panels were distributed to 48 sites (FY 2022) and 27 sites (FY 2023) across 14 and 9 provinces, respectively, in Thailand. The results from participating laboratories were collected and evaluated for performance. The results were scored, and acceptable performance criteria were defined as the proportion of panels correctly tested, which was set at 100%. The satisfactory performance ranged from 96% to 100% and was not significantly different among the 13 health regions. The developed and implemented DTS panels can be used to monitor the quality of RTRI testing in Thailand. [ABSTRACT FROM AUTHOR]

The present study focuses on establishing the quality assurance of laboratories for recent infections (RTRI) in Thailand. We developed a cold-chain independent method, using fully characterized plasma obtained from the Thai Red Cross Society, and prepared as dried tube specimens (DTS). Twenty microliters of HIV-seronegative, recent, and long-term infected samples were aliquoted into individual tubes and dried at room temperature, 20–30 degrees Celsius, in a biosafety cabinet overnight to ensure optimal preservation. The DTS external quality control and external quality assessment were tested for homogeneity and stability following the ISO/Guide 35 guidelines. The DTS panels were distributed to 48 sites (FY 2022) and 27 sites (FY 2023) across 14 and 9 provinces, respectively, in Thailand. The results from participating laboratories were collected and evaluated for performance. The results were scored, and acceptable performance criteria were defined as the proportion of panels correctly tested, which was set at 100%. The satisfactory performance ranged from 96% to 100% and was not significantly different among the 13 health regions. The developed and implemented DTS panels can be used to monitor the quality of RTRI testing in Thailand.

Abstract Background As the Human Immunodeficiency Virus (HIV) rapid testing services expanded to reach the global target that 95% of people living with the virus will know their status by 2030, ensuring the quality of those services becomes critical. This study was conducted to assess the performance of HIV Rapid testing at sites in health facilities that were enrolled in the Rapid Test Quality Improvement Initiative (RTQII) in Ethiopia. Methods Characterized HIV proficiency testing (PT) panels of Dried Tube Specimen (DTS) were prepared, verified, and distributed to testing sites from August to December 2019. In addition on-site evaluation of HIV testing sites (HTSs) was conducted using a checklist to assess testing conditions. For proficiency testing, the study included 159 HIV testing sites (HTSs) in 41 Health facilities (HFs) in five administrative regions and two city administrations. The collected data was analyzed by SPSS version 20 and chi-square test was applied to identify the association between acceptable performance and contributing factors. Testing sites with 100% PT score as well as conducting the test with adherence to the National HIV Testing Algorithm were considered acceptable. Results The overall acceptable performance (100% PT score with the correct algorithm followed) was found to be 62% while 12% scored 80% and 11% scored between 20 and 60%. The rest 15% were not considered as acceptable due to failure to adhere to the National HIV Testing Algorithm. Testing sites that participated in External Quality Assessment/Proficiency Testing schemes have shown better performance than those that did not participate with 70% and 56% performance respectively (p = 0.057).

Background: As the Human Immunodeficiency Virus (HIV) rapid testing services expanded to reach the global target that 95% of people living with the virus will know their status by 2030, ensuring the quality of those services becomes critical. This study was conducted to assess the performance of HIV Rapid testing at sites in health facilities that were enrolled in the Rapid Test Quality Improvement Initiative (RTQII) in Ethiopia. Methods: Characterized HIV proficiency testing (PT) panels of Dried Tube Specimen (DTS) were prepared, verified, and distributed to testing sites from August to December 2019. In addition on-site evaluation of HIV testing sites (HTSs) was conducted using a checklist to assess testing conditions. For proficiency testing, the study included 159 HIV testing sites (HTSs) in 41 Health facilities (HFs) in five administrative regions and two city administrations. The collected data was analyzed by SPSS version 20 and chi-square test was applied to identify the association between acceptable performance and contributing factors. Testing sites with 100% PT score as well as conducting the test with adherence to the National HIV Testing Algorithm were considered acceptable. Results: The overall acceptable performance (100% PT score with the correct algorithm followed) was found to be 62% while 12% scored 80% and 11% scored between 20 and 60%. The rest 15% were not considered as acceptable due to failure to adhere to the National HIV Testing Algorithm. Testing sites that participated in External Quality Assessment/Proficiency Testing schemes have shown better performance than those that did not participate with 70% and 56% performance respectively (p = 0.057). [ABSTRACT FROM AUTHOR]

BACKGROUND: An important aspect of ensuring blood safety is the performance of mandatory serological testing for transfusion transmissible infections. The practice of internal quality control (IQC) in blood banks in India is nonuniform, especially the use of third-party materials. Cited reasons are cost, lack of access to control materials, and need for deep-freezers for storage, if prepared in-house. OBJECTIVE: Validation of dried tube specimen (DTS) from HIV-positive plasma as a low-cost, stable material for use as IQC material in blood banks. METHODS: Fresh-frozen plasma (FFP) prepared from four HIV-positive blood-donors were pooled. Equal numbers of seronegative FFPs were pooled. Twenty microlitre aliquots of plasma were made in micro-centrifuge tubes and air-dried overnight at room-temperature. These were stored in 2–8°C refrigerators and tested once weekly for 6 months on multiple platforms with different detection principles: Rapid tests, second-generation enzyme-linked immunosorbent assay (ELISA), fourth-generation ELISA, and fourth-generation Chemiluminescence immunoassay. The protocol was sustained over the next 6 months with decreased testing frequency to study the extended stability of DTS. RESULTS: A total of 139 positive-DTS and 139 negative-DTS were tested with 100% samples showing consistent results on all platforms over 1 year. There was mild deterioration in reaction strengths, which did not interfere in result interpretations. CONCLUSION: Plasma in form of DTS maintained stability when stored at 2–8°C for 1 year. This provides evidence that DTS can be a modality for the production of cost-effective, stable, in-house control material for resource-restricted countries.

BACKGROUND: An important aspect of ensuring blood safety is the performance of mandatory serological testing for transfusion transmissible infections. The practice of internal quality control (IQC) in blood banks in India is nonuniform, especially the use of third-party materials. Cited reasons are cost, lack of access to control materials, and need for deep-freezers for storage, if prepared in-house. OBJECTIVE: Validation of dried tube specimen (DTS) from HIV-positive plasma as a low-cost, stable material for use as IQC material in blood banks. METHODS: Fresh-frozen plasma (FFP) prepared from four HIV-positive blood-donors were pooled. Equal numbers of seronegative FFPs were pooled. Twenty microlitre aliquots of plasma were made in micro-centrifuge tubes and air-dried overnight at room-temperature. These were stored in 2–8°C refrigerators and tested once weekly for 6 months on multiple platforms with different detection principles: Rapid tests, second-generation enzyme-linked immunosorbent assay (ELISA), fourth-generation ELISA, and fourth-generation Chemiluminescence immunoassay. The protocol was sustained over the next 6 months with decreased testing frequency to study the extended stability of DTS. RESULTS: A total of 139 positive-DTS and 139 negative-DTS were tested with 100% samples showing consistent results on all platforms over 1 year. There was mild deterioration in reaction strengths, which did not interfere in result interpretations. CONCLUSION: Plasma in form of DTS maintained stability when stored at 2–8°C for 1 year. This provides evidence that DTS can be a modality for the production of cost-effective, stable, in-house control material for resource-restricted countries. [ABSTRACT FROM AUTHOR]

Abstract Background Malaria rapid diagnostic tests (RDTs) are largely responsible for the gains made in the proportion of malaria cases confirmed with a parasitological test. However, quality assurance programs to support their use remain a challenge. A dried tube specimen (DTS) method was developed that showed potential for use as a stable source of quality control (QC) sample for RDTs and for use in external quality assessments or proficiency testing (PT). DTS was further assessed with focus on sample stability under field settings in Benin and Liberia. Methods DTS were prepared using Plasmodium falciparum 3D7 or W2 strains at concentrations of 1000, 500 or 0 parasites/µL and tested for baseline reactivity at the Centers for Disease Control and Prevention, Atlanta before shipping. In Benin and Liberia, DTS were stored under refrigeration in a reference laboratory (RL) or in health centres under ambient temperatures. Seven rounds of testing were performed at 4-week intervals during which DTS were tested on RDTs stored at the RL or at health centres. Observed DTS reactivity at the RL and health centres were compared to expected reactivity to determine DTS stability. DTS were also assembled into a PT panel and tested by health facility staff at the mid and end time-points of the study. Daily maximum and minimum storage temperatures for RDTs and DTS were recorded. Results In Benin, DTS, irrespective of storage conditions, produced the expected reactivity at all time points. However, evidence of degradation was observed at weeks 20 and 24 for DTS stored at ambient temperatures at the health centres and not those stored under refrigeration at the RL. In Liberia, sample degradation was observed starting at week 8 especially among DTS stored at the health facilities. The degradation was associated with prolonged storage of DTS under ambient temperature prior to study commencement and less than optimal storage temperatures at the RL. Use of DTS in a PT enabled identification of health worker errors in performing the tests. Conclusion DTS is a feasible tool for use as QC material and for PT under field conditions. Long-term (> 5 months) storage of DTS requires refrigeration.

Background: Proficiency testing (PT) is part of a comprehensive quality assurance programme, which is critical to ensuring patients receive accurate and reliable diagnostic testing. Implementation of the Cepheid Xpert® MTB/RIF assay to aid in the diagnosis of tuberculosis has expanded rapidly in recent years; however, PT material for Xpert MTB/RIF is not readily available in many resource-limited settings. Objective: To develop an accurate and precise PT material based on the dried tube specimen (DTS) method, using supplies and reagents available in most tuberculosis culture laboratories. Methods: Dried tube specimens were produced at the United States Centers for Disease Control and Prevention from 2013 to 2015 by inactivating liquid cultures of well-characterised mycobacterial strains. Ten percent of DTS produced were tested with Xpert MTB/RIF and evaluated for accuracy and precision. Results: Validation testing across eight rounds of PT demonstrated that DTS are highly accurate, achieving an average of 96.8% concordance with the Xpert MTB/RIF results from the original mycobacterial strains. Dried tube specimen testing was also precise, with cycle threshold standard deviations below two cycles when inherent test cartridge variability was low. Conclusion: Dried tube specimens can be produced using equipment already present in tuberculosis culture laboratories, making Xpert MTB/RIF PT scale-up more feasible in resource-limited settings. Use of DTS may fill the gap in tuberculosis laboratory access to external quality assessment, which is an essential component of a comprehensive continuous quality improvement programme.

Background: Malaria rapid diagnostic tests (RDTs) are largely responsible for the gains made in the proportion of malaria cases confirmed with a parasitological test. However, quality assurance programs to support their use remain a challenge. A dried tube specimen (DTS) method was developed that showed potential for use as a stable source of quality control (QC) sample for RDTs and for use in external quality assessments or proficiency testing (PT). DTS was further assessed with focus on sample stability under field settings in Benin and Liberia. Methods: DTS were prepared using Plasmodium falciparum 3D7 or W2 strains at concentrations of 1000, 500 or 0 parasites/µL and tested for baseline reactivity at the Centers for Disease Control and Prevention, Atlanta before shipping. In Benin and Liberia, DTS were stored under refrigeration in a reference laboratory (RL) or in health centres under ambient temperatures. Seven rounds of testing were performed at 4-week intervals during which DTS were tested on RDTs stored at the RL or at health centres. Observed DTS reactivity at the RL and health centres were compared to expected reactivity to determine DTS stability. DTS were also assembled into a PT panel and tested by health facility staff at the mid and end time-points of the study. Daily maximum and minimum storage temperatures for RDTs and DTS were recorded. Results: In Benin, DTS, irrespective of storage conditions, produced the expected reactivity at all time points. However, evidence of degradation was observed at weeks 20 and 24 for DTS stored at ambient temperatures at the health centres and not those stored under refrigeration at the RL. In Liberia, sample degradation was observed starting at week 8 especially among DTS stored at the health facilities. The degradation was associated with prolonged storage of DTS under ambient temperature prior to study commencement and less than optimal storage temperatures at the RL. Use of DTS in a PT enabled identification of health worker errors in performing the tests. Conclusion: DTS is a feasible tool for use as QC material and for PT under field conditions. Long-term (> 5 months) storage of DTS requires refrigeration. [ABSTRACT FROM AUTHOR]

Background: Proficiency testing (PT) is part of a comprehensive quality assurance programme, which is critical to ensuring patients receive accurate and reliable diagnostic testing. Implementation of the Cepheid Xpert® MTB/RIF assay to aid in the diagnosis of tuberculosis has expanded rapidly in recent years; however, PT material for Xpert MTB/RIF is not readily available in many resource-limited settings. Objective: To develop an accurate and precise PT material based on the dried tube specimen (DTS) method, using supplies and reagents available in most tuberculosis culture laboratories. Methods: Dried tube specimens were produced at the United States Centers for Disease Control and Prevention from 2013 to 2015 by inactivating liquid cultures of well-characterised mycobacterial strains. Ten percent of DTS produced were tested with Xpert MTB/RIF and evaluated for accuracy and precision. Results: Validation testing across eight rounds of PT demonstrated that DTS are highly accurate, achieving an average of 96.8% concordance with the Xpert MTB/RIF results from the original mycobacterial strains. Dried tube specimen testing was also precise, with cycle threshold standard deviations below two cycles when inherent test cartridge variability was low. Conclusion: Dried tube specimens can be produced using equipment already present in tuberculosis culture laboratories, making Xpert MTB/RIF PT scale-up more feasible in resource-limited settings. Use of DTS may fill the gap in tuberculosis laboratory access to external quality assessment, which is an essential component of a comprehensive continuous quality improvement programme. [ABSTRACT FROM AUTHOR]

To develop and trial a dried tube specimen (DTS) panel for proficiency testing of dual HIV/syphilis rapid diagnostic tests (RDTs) at clinical sites. DTS panels were prepared using plasma samples with known HIV and syphilis results, to give varying reactivity for syphilis and HIV test lines on RDTs. Laboratory DTS panels were stable for a minimum 4-week period at ambient temperatures with no inter-reader variability of results. Field testing of panels with Standard Diagnostics Bioline HIV/Syphilis duo showed 100% correlation with laboratory results, and excellent mean pair agreement between the two clinical sites (k = 1.0). With Chembio Dual Path Platform HIV-Syphilis, there were two false negative results for HIV and syphilis, respectively, at one site; and good mean pair agreement between the two sites (k = 0.9). It is feasible and practicable to incorporate DTS panels into a field proficiency testing scheme for dual HIV/syphilis RDTs. [ABSTRACT FROM AUTHOR]

Abstract: Participation in external quality assessment programs is critical to ensure quality clinical laboratory testing. Commercially available proficiency test panels for HIV-1 virus load testing that are used commonly in external quality assessment programs remain a financial obstacle to resource-limited countries. Maintaining cold-chain transportation largely contributes to the cost of traditional liquid proficiency test panels. Therefore, we developed and evaluated a proficiency test panel using dried tube specimens that can be shipped and stored at ambient temperature. This dried tube specimens panel consisted of 20μl aliquots of a HIV-1 stock that were added to 2ml tubes and left uncapped for drying, as a preservation method. The stability of dried tube specimens at concentrations ranging from 102 to 106.5 RNA copies/ml was tested at different temperatures over time, showing no viral load reduction at 37°C and a decrease in viral load smaller than 0.5Log10 at 45°C for up to eight weeks when compared to initial results. Eight cycles of freezing–thawing had no effect on the stability of the dried tube specimens. Comparable viral load results were observed when dried tube specimen panels were tested on Roche CAPTAQ, Abbott m2000, and Biomerieux easyMAG viral load systems. Preliminary test results of dried proficiency test panels shipped to four African countries at ambient temperature demonstrated a low inter assay variation (SD range: 0.29–0.41Log10 RNA copies/ml). These results indicated that HIV-1 proficiency test panels generated by this methodology might be an acceptable alternative for laboratories in resource-limited countries to participate in external quality assessment programs. [Copyright &y& Elsevier]