Search

The chemical and sensory properties of corn extrudates enriched with spray-dried tomato powder (TP) in 4, 6 and 8% ratios were researched. Two extrusion temperature regimes were used: 135/170/170 °C (E1) and 100/150/150 °C (E2). Ascorbic acid (AA) at levels of 0.5 and 1% was also added to the raw mixtures in order to prevent the undesirable oxidation of the constituents, primarily carotenoids. AA was especially efficient in the case of the lutein content and 1% AA, but lutein originating from TP was more sensitive to the extrusion conditions than corn lutein, and zeaxanthin was more sensitive than lutein. Lycopene, α-carotene, 13-cis-β carotene and 9-cis-β carotene degraded completely in all the samples, at both extrusion regimes. The proposed models for the color of the extrudates showed the significant influence of TP and AA. Extrudates obtained at the E1 temperature regime containing 4% TP and pure corn extrudate with 1% AA were the best-rated samples by the sensory panel.

Investigated were the influence of drying and pressing parameters of rapeseed, sunflower, and safflower seeds on oil yield, as well as antioxidant addition on the oxidative stability of cold pressed oils. The parameters of the oilseeds and cold pressed oils quality (moisture content, iodine value, saponification value, peroxide value, free fatty acids, and insoluble impurities content) were determined using standard methods. In terms of oxidative stability, rosemary, green tea, and pomegranate extracts were used as natural antioxidants, and propyl gallate was used as synthetic antioxidant. The results showed that the moisture content of the oilseeds, as well as nozzle size and electromotor frequency of the press had an effect on the yield of cold pressed oil. By reducing the nozzle size and electromotor frequency, the volume of produced cold pressed oil increased. Rosemary extract effectively increased the oxidative stability of sunflower and safflower oils, and green tea extract increased the stability of rapeseed oil. Greater stabilisation of the tested oils was achieved with the addition of 0.4% of natural antioxidants compared to the addition of 0.2 %. The synthetic antioxidant, propyl gallate, failed to stabilise safflower oil, and unlike the natural antioxidants, it was less protective for rapeseed and sunflower oil.

To improve the nutritional value of bread, as well as to satisfy consumers whose awareness of the importance of nutrition to preserve health is growing significantly, it is desirable to enrich bread and bakery products with functional components. Carob (Ceratonia siliqua L.) is an evergreen tree that is widely distributed in the Mediterranean region and belongs to the legumes group. As carob pulp contains a unique combination of polyphenolic compounds and dietary fibre, it can be a useful raw material for the production of enriched bakery products. In this work, the possibility of applying carob extract as a potential natural preservative and functional additive in the production of bread was investigated. With this aim, 0.5, 1.5, 2.5 and 3.5% of powdered carob extract (CP) were added to bread dough and the quality characteristics of the bread were examined. The microbiological quality of bread was significantly better in samples with the addition of CP, which was confirmed by the lower values of the total number of bacteria and the absence of the Bacillus cereus. The addition of up to 3.5% carob extract had no negative effect on the sensory quality of the bread. The brightness of the bread samples decreased (L*), while the proportion of the red tone (a*) increased, and the intensity of the yellow tone (b*) decreased with an increase in the proportion of CP. The amount of total phenols (0.27 mg GAE/g) for the sample with 3.5% CP in bread was significantly higher compared to the control sample (0.12 mg GAE/g). The total antioxidant activity also increased significantly with the increase in the proportion of CP. Therefore, the present study proves that powdered carob extract can be successfully included in the production of a healthy functional food.

This research studies the influence of the addition of defatted press cakes (from the production of hazelnut, camelina, pumpkin, and hemp seed oil) on nutritionally important components: fibre, resistant starch, polyphenols, hydroxymethylfurfural (HMF), and acrylamide in directly and indirectly expanded snacks. The amounts of press cakes added to corn grits were 3, 6, and 9%. Extrusion was carried out in a laboratory single-screw extruder. For indirectly expanded products (SCFX), supercritical CO2 was injected during extrusion, and secondary expansion was completed in the microwave oven. The type and content of press cake, as well as the type of product, significantly influenced total polyphenol content and antioxidant activity. Press cakes increased the contents of both soluble and insoluble fibre (from 1.94% d. m. and 1.28% d. m. for extrudates without press cakes up to 3.17% d. m. and 6.94% d. m. for SCFX extrudates with press cakes, respectively), and resistant starch was not markedly influenced by their addition. The influence of the content of press cake on HMF was not significant, whereas the type of cake and the type of extrusion influenced HMF significantly. In a raw mixture of corn grits with 3% of pumpkin press cake, HMF was below the limit of detection, and the highest content was found in the classically extruded sample with the addition of 9% of camelina press cake (580 ppb). In all samples, the acrylamide content was below the limit of detection, indicating that safe products were obtained. This research shows potential for the implementation of supercritical CO2 extrusion in the production of safe, nutritionally improved snack products. Future research might bring about the design of cost-effective processes applicable in the industry.

Starch is a polysaccharide that is widely used in food and other industries; therefore, due to its great potential, it is attempted to be maximally isolated from various foods rich in starch. Commonly, potatoes are used for starch production due to the relatively high starch content in tubers, and the process itself is complex and includes several steps. The aim of this study was to isolate and characterize starch from eight potato varieties. First, the basic chemical composition of the potato samples was determined, and then the isolation was carried out under laboratory conditions. The isolated starch was air dried, then ground and sieved through a 400 µm sieve. The basic chemical composition, amylose content, starch color, swelling capacity and solubility index, clarity of starch pastes, texture of starch gels and thermo-physical properties (gelatinization and retrogradation) were determined in the obtained starch samples. The results showed that the SL 13–25 potato variety had the lowest starch content, while the Stilleto variety had the highest starch content. The content of protein, fat, ash and crude fiber was relatively low in all of the isolated starches, indicating their high purity. Also, the difference in the color of the isolated starches was difficult to see. The highest amylose content had starch from Saprodi, while the lowest was observed in starch from SL 13–25. Starch from the cv. Dartiest had the highest, while starch from the cv. Sereno had the lowest gel strength. The starch of the cv. Dartiest also had the highest clarity value. The retrogradation transition temperatures and enthalpies were lower compared to the gelatinization temperatures and enthalpies. With the increasing temperature, both the swelling capacity and the solubility index of all the samples increased. According to the obtained differences, this study confirmed the significant influence and role of different cultivars on starch characteristics.

The chocolate industry is constantly developing new products with different fillings, toppings, flavours, etc. Chocolates with alcoholic filling are popular, especially with young adults. In chocolates with alcoholic filling different kinds of thickeners can be used to increase the viscosity of the filling and make production easier. In this study, we examined cocoa shells, a by-product of the chocolate industry, as a new ingredient and thickener of an alcoholic filling. Chocolates with bitter herbal liqueur were produced in a ball mill with four different fillers. A comparison of guar gum and cocoa shell as thickeners was conducted. The influence of the filling ingredients on the stability of the filled chocolate was determined by measuring colour and gloss over 30 days of accelerated fat bloom. The results showed that chocolates for which the cocoa shell was used were more stable than chocolates where guar gum was used. Evaluation of sensory properties of chocolates with bitter herbal liqueur and different thickeners was conducted by the trained sensory panel. The highest-rated, after sensory assessment, were dark chocolates that contained cocoa shells in the filling. Also, an online questionnaire was conducted to examine consumer preference for a new product. According to the results, it can be concluded that the production of this chocolate would be desirable.

The aim of this paper was to investigate the influence of Zn‐ and Se‐fortified wheat flour addition to the corn grits at 90:10, 80:20, 70:30, 60:40 ratios on the hardness, fracturability, expansion ratio, bulk density, color, and sensory attributes of the extrudates. Extrusion was performed at three temperature profiles: 140/170/170 °C, 150/180/180 °C, and 160/190/190 °C. With an increase in the proportion of Zn‐ and Se‐ fortified wheat flour and temperature increase, all observed physical characteristics of extrudates decreased. The lightness of all the samples increased after the extrusion. The total color change increased with the addition of Zn‐ and Se‐fortified wheat flour. Sensory characteristics showed that the samples with a lower percentage of added Zn‐ and Se‐fortified wheat flour had better scores and acceptability, compared to the samples with a higher fortification ratio.

The amount of waste generated by the production of food products has increased over the years, presenting economic and environmental problems. To minimize these problems, it is necessary to valorize food waste in order to explore its further utilization in the food industry and also in other industries. Such waste usually represents a valuable raw material in terms of dietary fibers or bioactive components. Dietary fibers, especially pectin, are usually derived from apple pomace or citrus peel. Currently, sources of dietary fibers include novel food waste streams and by-products. Also, the utilization of novel extraction techniques is in demand to limit conventional processes. This review provides information about the conventional and innovative extraction approaches for dietary fibers from different food wastes. The extraction of these fibers depends on the materials used and the extraction conditions, such as temperature, solvents, time, pH, and liquid/solid ratio. Novel green techniques may ensure an increase in fiber yield and better quality, as well as a reduction in operating time and toxic solvents.

Citrus fruits processing results in the generation of huge amounts of citrus by-products, mainly peels, pulp, membranes, and seeds. Although they represent a major concern from both economical and environmental aspects, it is very important to emphasize that these by-products contain a rich source of value-added bioactive compounds with a wide spectrum of applications in the food, cosmetic, and pharmaceutical industries. The primary aim of this review is to highlight the great potential of isolated phytochemicals and extracts of individual citrus by-products with bioactive properties (e.g., antitumor, antimicrobial, antiviral, antidiabetic, antioxidant, and other beneficial activities with health-promoting abilities) and their potential in pharmaceutical, biomedical, and biological applications. This review on citrus by-products contains the following parts: structural and chemical characteristics; the utilization of citrus by-products; bioactivities of the present waxes and carotenoids, essential oils, pectins, and phenolic compounds; and citrus by-product formulations with enhanced biocactivities. A summary of the recent developments in applying citrus by-products for the treatment of different diseases and the protection of human health is also provided, emphasizing innovative methods for bioaccessibility enhancements (e.g., extract/component encapsulation, synthesis of biomass-derived nanoparticles, nanocarriers, or biofilm preparation). Based on the representative phytochemical groups, an evaluation of the recent studies of the past six years (from 2018 to 2023) reporting specific biological and health-promoting activities of citrus-based by-products is also provided. Finally, this review discusses advanced and modern approaches in pharmaceutical/biological formulations and drug delivery (e.g., carbon precursors for the preparation of nanoparticles with promising antimicrobial activity, the production of fluorescent nanoparticles with potential application as antitumor agents, and in cellular imaging). The recent studies implementing nanotechnology in food science and biotechnology could bring about new insights into providing innovative solutions for new pharmaceutical and medical discoveries.

The aim of this research was to evaluate bee pollen load samples collected in Tuzla Canton regarding physicochemical composition and antioxidant properties, with relation to collecting area and time of collection. Bee pollen load samples were collected in two periods: March/April and May/June at 13 locations, dried and analysed for protein, free fat, ash, moisture, total polyphenol and total flavonoid content, and antioxidant properties. The results showed that bee pollen collected in March/April had lower content of proteins, but higher content of total polyphenols and higher antioxidant activity, while total flavonoid content was not influenced by collection period. The location had significant influence on bee pollen properties.

The possible use of high voltage electrical discharges (HVED) at different frequencies (20, 50, and 100 Hz) and ultrasound-assisted extraction (UAE) at different temperatures (20, 40, and 80°C) for the recovery of phenolics from indigenous fungus-resistant grape by-product was evaluated. All extractions were performed over the period of 5, 10, and 15 min and with methanol- and ethanol-based solvents. Grape pomace (the grape by-product) was collected during the preparation of grape jams. The main phenolics identified in grape pomace were anthocyanins, including malvidin, delphinidin, peonidin-3- O -glucoside, and cyanidin-3- O -glucoside. Beside anthocyanins, phenolic acids, flavan-3-ols, and flavonols were identified. The HVED-assisted extraction showed to be a superior extraction method for obtaining high yields of all analysed compounds. The highest amount of total phenolics (3023.57 mg GAE/100 g DM) was extracted from grape pomace, using 50% ( v/v ) ethanol and 60 kV/cm HVED at 100 Hz for 15 min. The antioxidant activity of the HVED extract was 2.17 mmol Trolox/g DM. The highest yield of the identified phenolics from grape pomace was obtained with electric field intensity of 60 kV/cm and total energy input of 22.27 kJ/kg, during the extraction.

Polyphenols are secondary metabolites of plants, commonly present in the human diet. Since they exhibit a wide range of bioactivities, polyphenols are extensively studied in the fields of nutrition and human health. Current studies have shown a high interest in determining the bioaccessibility of polyphenols, the amount of polyphenols that becomes available for absorption in the digestive tract. Bioaccessibility can be determined with the help of in vitro static gastrointestinal (GI) digestion models. In such a methodology, food samples containing polyphenols are subjected to a series of conditions that mimic the human gastrointestinal tract, with associated parameters. A high number of GI models with slightly different parameters were published. The purpose of this paper is to review the literature, focusing on the determination of polyphenol bioaccessibility and the parameters used in these GI digestion models, such as time, temperature, and pH of digestion, as well as enzyme concentrations. Gastrointestinal digestion models consist of oral, gastric and small intestine phases. These models provide a simple and reliable methodology which enables insight into the amount of bioaccessible polyphenols.

Phytochemicals, or phytonutrients, are a group of biologically active substances from plants [...]

Fusarium mycotoxins deoxynivalenol (DON) and zearalenone (ZEN) often contaminate cereals and cereal by-products. Certain thermal processing methods used in the food industry show promising results in terms of reduction of cereal contamination with mycotoxins. In order to establish the degree of DON and ZEN reduction in naturally contaminated cereals (maize, wheat and oat), this study investigated the effects of cooking, roasting and extrusion cooking, performed at different temperatures (100 – 220 °C) and for a different length of time (10 – 30 min) on these mycotoxins concentrations. Before and after the treatment, cereal samples were analysed for DON and ZEN concentrations using enzyme-linked immunosorbent assay (ELISA). In comparison to cooking, which achieved only a negligible mean mycotoxin reduction (of up to 8% for DON and 11% for ZEN), roasting and extrusion cooking resulted in a significantly more pronounced mycotoxin reduction (of up to 40% for DON & 46% for ZEN and of up to 75% for DON & 80% for ZEN, respectively) (p < 0.05). The results show similar effects of thermal processing on all of the studied cereals (p > 0.05), suggesting that extrusion cooking can be considered as an effective thermal method capable of reducing mycotoxin content in cereals.

Pasta is one of the most popular meals in the world. It is affordable, easy to combine with other foods and easy to cook. Unfortunately, pasta is energy-rich and nutrient-poor. Whole-wheat pasta is somewhat better in nutritional quality, but further improvements may be made. One option is to add different raw materials and specific nutritive components (vitamins, polyphenols, fiber, protein, etc.) to semolina. However, this approach changes its physicochemical properties, e.g. cooking loss, texture, etc., which cannot be disregarded. The current research investigates possibilities for production of barley-enriched pasta with acceptable cooking qualities. To ensure the beneficial health effects of β-glucan, β-glucan-rich barley was selected asa starting material. Pasta enriched with 10–50% β-glucan-rich barley flour was produced in the mini-press and the laboratory extruder and then dried at low, medium and high temperature regimes. Colour, cooking quality and microstructure of the enriched pasta were investigated to determine its acceptability. The research showed that barley-enriched pasta of good cooking quality might be produced by selecting an optimal combination of suitable production parameters for forming and drying.

The aim was to analyse polyphenols and their antiradical activity in white cabbage cultivars Čepinski, Varaždinski, Ogulinski and Bravo from different geographical locations of Croatia. Polyphenols were analysed by using high-performance liquid chromatography (HPLC) and spectrophotometric methods (total polyphenols and total flavonoids), antiradical activity by using DPPH and ABTS methods. Caffeic, p-coumaric, ferulic and sinapic acids were identified. Total polyphenols, total flavonoids and polyphenols determined with HPLC (467 – 598, 104 – 166, 94 – 126 mg kg-1 FW, respectively) and antiradical activity showed statistically significant variations. Varaždinski showed the highest polyphenol content, usually followed by Čepinski or Ogulinski while Bravo always showed the lowest polyphenol content. Principal component analysis showed clustering of all four cultivars. Čepinski, which was never analysed before, could be a valuable cultivar for further examination.

Volatile organic compounds in honey represent a fingerprint of a specific honey and therefore could significantly affect the quality of honey brandy. In addition, during fermentation, yeast synthesise volatiles also affecting aroma and quality of brandy. The aim of this research was to assess the impact of immobilized cell fermentation on volatile aroma of honey brandies produced from acacia and chestnut honey. Aroma profile was determined using GC/FID and sensory analysis was conducted according to German DLG model. The results showed that immobilized cell technique had resulted in honey brandies with lower ester contents, but significantly higher content of volatile organic compounds from honey.

Extruded snacks are products which are easy to consume, tasty, crispy, with thousands of shapes, flavours, textures and are consumed worldwide. They can be expanded directly or indirectly. Directly expanded products are cooked, expanded, shaped and cut off the extruder, dried and packaged. It is a less complicated process than the indirect expansion, products have low bulk density, and are seasoned with different types of flavours and oils. Indirectly expanded products are stable during storage and have high bulk density, provide opportunity to produce a wide range of products. Different types of raw materials (corn, potato, wheat, oat, by-products of food industry, etc.) and combination of ingredients can be incorporated into the products. Non-starch ingredients such as protein, fibre, vitamins and minerals are more likely to be incorporated into indirectly expanded products than into directly expanded products. This makes them delicious, healthier and more interesting to customers. The most commonly used ways of expansion are deep fat frying, hot-air puffing and microwave heating.

The aim of this research was to examine the influence of pasteurisation of cocoa liquor at different temperatures (115, 120, 125 and 140 °C) and 3-week-storage time at 40 °C on microbial safety, peroxide value, polyphenol, and flavan-3-ol content. Peroxide value of the cocoa liquor increased after both, pasteurisation and storage, but not significantly. Although total polyphenol content decreased, flavan-3-ol content was stable during the investigated period. Microbial quality was satisfying, and the most stable mass was the one treated at 140 °C.

The primary object of this paper was to investigate the influence of carrot powder (CP) addition to corn grits at levels 4, 6 or 8% and ascorbic acid (AA) addition at levels 0.5 and 1%, on hardness, fracturability, expansion and density of the extrudates. Sensory attributes of the selected extrudates were scored by the panel of ten professional tasters. Extrusion was done at two temperature regimes: 135/170/170°C and 100/150/150°C. Lower temperature regime led to increased hardness and density of extrudates, but at the same time to better expansion. The addition of CP and AA led to decreased hardness and the expansion, but increased density at both temperature regimes. Sensory assessment gave satisfactory results, especially for E1 temperature regime and 4% of carrot powder addition.

Codium adhaerens from the Adriatic Sea (Croatia) was comprehensively investigated regarding less polar compounds for the first time. Although there are several phytochemical studies on C. adhaerens from other regions, this is the first report on volatile organic compounds (VOCs) from fresh (FrCa) and air-dried (DrCa) samples. The novelty is also related to its targeted antioxidant potential in vitro and in vivo. The main aims were to: (a) identify and compare VOCs of FrCa and DrCa obtained by headspace solid-phase microextraction (HS-SPME) and hydrodistillation (HD); (b) determine fatty acid (FA) composition of freeze-dried sample (FdCa); (c) determine the composition of less polar fractions of FdCa by high-performance liquid chromatography–high-resolution mass spectrometry with electrospray ionisation (UHPLC-ESI-HRMS); and (d) comprehensively evaluate the antioxidant activity of the fractions by four in vitro assays and in vivo zebrafish model (including embryotoxicity). Significant changes of VOCs were found after air drying. ω6 FAs were present in higher content than ω3 FAs indicating C. adhaerens as a good source of dietary polyunsaturated FAs. The results obtained in vivo correlate well with in vitro methods and both fractions exerted similar antioxidative responses which is in agreement with the high abundance of present biomolecules with known antioxidant properties (e.g., fucoxanthin, pheophytin a, and pheophorbide a). These results suggest that C. adhaerens might be a potent source of natural antioxidants that could be further used in the research of oxidative stress-related diseases.

Resistant starch (RS) is a part of insoluble dietary fiber, and it could be recognized as a functional food ingredient in some types of confectionery products that lack dietary fiber. Unlike dark and milk chocolate, white chocolate does not contain fat-free cocoa solids rich in dietary fiber. In the present study, 5%, 10%, and 15% of white chocolate were substituted with RS in order to improve the nutritional value of enriched white chocolate. The influence of RS on rheological, textural, and thermal properties of the chocolate fat phase was firstly investigated, and then further influence on physical properties, dietary fiber content, and sensory characteristics of enriched white chocolates were investigated. The obtained results showed that enriched chocolates had increased content of total dietary fiber and reduced total fats and protein content in accordance with the added amount of RS. At the same time, RS increased viscosity and reduced the hardness and volume mean diameter in enriched chocolates in accordance with the added amount. RS improved the nutritional composition of white chocolate by increasing the content of dietary fiber. At the same time, RS did not impair the color and sensory characteristics of enriched white chocolates.

The effects of defatted hemp cake added to corn grits (at ratios of 0, 5, and 10% DM), the moisture content of the mixtures (15, 20, and 25%) and the temperature in the extruder ejection zone (150, 165, and 180°C) on the physical properties of extruded products have been investigated. Statistical optimization of investigated extrusion conditions using the response surface methodology was performed. The hemp cake was completely defatted by means of a supercritical CO2 extraction. The extrusion was performed on a laboratory single screw extruder and regulated by the following parameters: temperature in the dosing and compression zone (120 and 150°C), screw compression ratio (4 : 1), round die (4 mm). The change of extrusion process conditions significantly affected the physical properties of produced snacks. The expansion ratio ranged between 1.38 and 3.11, bulk density between 0.14 and 0.49 g/cm3, hardness between 18.15 and 70.62 N, fracturability from 3.65 to 10.38 mm, and the total colour change between 3.25 and 24.73.

Abstract Chamomile, a well-known medicinal plant, is a rich source of bioactive compounds, among which two coumarin derivatives, umbelliferone and herniarin, are often found in its extracts. Chamomile extracts have found a different uses in cosmetic industry, as well as umbelliferone itself, which is, due to its strong absorption of UV light, usually added to sunscreens, while herniarin (7-methoxycoumarin) is also known for its biological activity. Therefore, chamomile extracts with certain herniarin and umbelliferone content could be of interest for application in pharmaceutical and cosmetic products. The aim of this study was to compare the extracts of different chamomile fractions (unprocessed chamomile flowers first class, processed chamomile flowers first class, pulvis and processing waste) and to identify the best material and method of extraction to obtain herniarin and umbelliferone. Various extraction techniques such as soxhlet, hydrodistillation, maceration and supercritical CO2 extraction were used in this study. Umbelliferone and herniarin content was determined by high performance liquid chromatography (HPLC). The highest yield of umbelliferone (11.80 mg/100 g) and herniarin (82.79 mg/100 g) were obtained from chamomile processing waste using maceration technique with 50% aqueous ethanol solution and this extract has also proven to possess antioxidant activity (61.5% DPPH scavenging activity). This study shows a possibility of potential utilization of waste from chamomile processing applying different extraction techniques.

The prospects of sparkling wine production by the 'Champenoise' method using alginate-immobilised yeast cells were examined. Grape varieties dominant in quantity were selected within the group of recommended and permitted varieties of Kutjevo vineyards, located in the eastern part of continental Croatia. Research revealed that there are no influential variations in the principal physicochemical and sensory characteristics between sparkling wines obtained through immobilised yeast and traditional sparkling method. The analysis of aroma compounds showed minor differences between samples. Observed oenological parameters assessed in the final products did not show any relevant oenological differences, with the exception of alcohol content, which was slightly higher in sparkling wines made with yeast cells immobilised with calcium alginate beads. According to this research, the sensory properties of the produced sparkling wines, compared to sparkling wine produced with free yeast, did not show any significant differences. On the full-scale obtained results indicate that some of the selected varieties can be sorted as suitable for the production of sparkling wine using immobilised yeast cells.

In this study, an efficient utilization and valorization of mandarin peel (Citrus unshiu Marc. var. Kuno) was investigated using innovative and green extraction techniques. The first step of this study included the extraction and analysis of the volatile compounds by performing a supercritical CO2 (SC-CO2) extraction under different operating pressure conditions (100 and 300 bar). The analysis of volatile compounds of the obtained extracts was conducted by gas chromatography-mass spectrometry (GC-MS), and limonene was found to be the dominant volatile component (13.16% at 100 bar; 30.65% at 300 bar). After SC-CO2 treatment, the exhausted citrus peel waste enriched with bioactive compounds was subjected to subcritical water extraction (SWE) in a wide temperature range (130–220 °C) using different solvent-solid ratio (10–30 mL/g) in time periods from 5 to 15 min, in order to obtain bioflavonoids. Identification and quantification of present bioflavonoids was conducted by high-performance liquid chromatography with a with a diode array detector (HPLC), and hesperidin (0.16–15.07 mg/g) was determined as the most abundant flavanon in mandarin peel with other polyphenolic compounds that were possible by-products of thermal degradation. At higher temperatures, the presence of 5-hydroxymethylfurfural (5-HMF) and chlorogenic acid were detected. Antiradical activity and total phenolic content in the extracts were determined using spectrophotometric methods, while the process optimization was performed by response surface methodology (RSM).

The addition of brewer’s spent grain (BSG), sugar beet pulp (SBP) and apple pomace (AP), on the nutritional properties of directly expanded snack products based on corn grits was investigated. Snack products were produced in a laboratory single screw extruder with the addition of 5, 10 and 15% d. m. of these by-products in corn grits. Chemical composition, total phenolic content, antioxidant activity, dietary fiber, resistant starch, starch damage and pasting properties of the mixtures and extruded samples were determined. Extrusion process and by-product additions had a significant effect on the proximate chemical composition. All three by-products increased contents of both soluble and insoluble dietary fiber, while the extrusion caused a reduction of insoluble fiber and increase of soluble fiber. After the extrusion process starch damage and antioxidant activity increased, while resistant starch content and total polyphenol content decreased. According to obtained results, it can be concluded that the investigated by-products can be used in the production of nutritionally more valuable corn snacks.

Cilj ovoga rada bio je ispitati utjecaj fermentacije pomoću imobiliziranih stanica kvasca na aromu i senzorska svojstva destilata proizvedenih od dviju sorti smokve koje se uzgajaju u Republici Hrvatskoj (Petrovača bijela i Petrovača crna). Uzorci destilata proizvedeni su klasičnim postupkom i pomoću imobiliziranih stanica kvasca. Profil arome određen je pomoću GC/FID-a, a senzorska analiza provedena je prema njemačkome DLG modelu. Rezultati su pokazali da postupak s imobiliziranim stanicama kvasca daje destilate s višim udjelom etanola i nižim udjelima estera, ali bolje senzorske kvalitete. Taj postupak ima velik potencijal u proizvodnji visokokvalitetnih voćnih destilata.

The aim of this research was to investigate the influence of immobilized cell fermentation on aroma and sensory characteristics of distillates produced from two fig varieties commonly grown in Croatia (Petrovača bijela and Petrovača crna). Distillate samples were produced both by classical and immobilized yeast fermentation technology. Aroma profile was determined using GC/FID and sensory analysis was conducted according to German DLG model. Results showed that immobilized cell technique gives distillates with higher ethanol and lower ester contents, but of higher sensory quality. It is a promising technique for production of high quality fruit distillates.

Lipoxygenases are widespread enzymes that catalyze oxidation of polyunsaturated fatty acids (linoleic, linolenic, and arachidonic acid) to produce hydroperoxides. Lipoxygenase reactions can be desirable, but also lipoxygenases can react in undesirable ways. Most of the products of lipoxygenase reactions are aromatic compounds that can affect food properties, especially during long-term storage. Lipoxygenase action on unsaturated fatty acids could result in off-flavor/off-odor development, causing food spoilage. In addition, lipoxygenases are present in the human body and play an important role in stimulation of inflammatory reactions. Inflammation is linked to many diseases, such as cancer, stroke, and cardiovascular and neurodegenerative diseases. This review summarized recent research on plant families and species that can inhibit lipoxygenase activity.

Chocolate is considered as both caloric and functional food. Its nutritional properties may be improved by addition of fiber; however, this may reduce polyphenols content. The aim of this research was to determine the influence of cocoa shell addition (as a source of fiber) and its combination with different ingredients (cocoa butter equivalents (CBE), emulsifiers, dairy ingredients) on polyphenols of dark and milk chocolates. Total polyphenol (TPC) and total flavonoid (TFC) contents were determined spectrophotometrically, identification and quantification of individual compounds by high pressure liquid chromatography and antioxidant capacity by ferric reducing antioxidant power (FRAP) assay. Results showed that even though addition of cocoa shell to chocolate results in reduced contents of TPC, TFC, and individual compounds, it is not significant compared to ones reported by other authors for commercial chocolates. Other ingredients influence determined values for all investigated parameters; however, additional research is needed to reveal exact mechanisms and implications.

The aim of this study was to evaluate Croatian pepper seed varieties (Podravka and Slavonka) as a new source of added value ingredients. Pepper seed is mostly considered a by-product. For the first time, the pepper (Capsicum annuum L.) seeds of the Slavonka and Podravka varieties were examined as the source material for oil production by the two methods of extraction: cold pressing (CP) and supercritical CO2 extraction (SC-CO2). Further, fatty acid profile, tocopherols, and sensory analysis of the oils were examined, as well as the chemical characteristics and antioxidant potential of seed flour. The antioxidant potential of pepper seed flour was different between varieties (Podravka 107 antioxidant unit (AU); Slavonka 70 antioxidant unit (AU)). The Podravka variety pepper seed oil has shown higher γ-tocopherol content (CP 80.1 mg/100 g; SC-CO2 extraction 65.3 mg/100 g) than the Slavonka variety (CP 65.3 mg/100 g; SC-CO2 extraction 16.0 mg/100 g). According to the obtained results, cold pressing (CP) would be a more favourable method for pepper seed oil extraction, taking into account sensory evaluation and nutritional quality. The pepper seed oil has potential for culinary application with a nutritional quality comparable to vegetable oils of a higher price class.

Cabbage is an important source of bioactive compound, which is available throughout the year. However, a lot of different traditional, and hybrid varieties with different levels and composition of bioactive compounds can be found on the market. The aim of the study was to obtain quantitative results showing comparative differences between different white cabbages (“Čepinski”, “Varaždinski”, “Bravo”, “Ogulinski”) from Croatia. Morphometric parameters and physicochemical composition were determined while using standard procedures. Phenolic acids were determined using high-performance liquid chromatography and volatile compounds were analysed by the solid-phase micro-extraction gas chromatography with mass spectrometry (SPME-GC-MS) smethod. The results showed that studied cabbage cultivars differed in physicochemical composition and morphological traits. Six phenolic acids were identified and quantified, whereas a sinapic acid was the most dominant component (65.9–78.15 mg/kg). Aldehydes, esters, alcohols, and terpenes were the major classes of organic volatile compounds present in the studied cabbages. “Čepinski”, which has never been analysed before, showed to contain the highest amount of d-limone (40.75 µg/L) and allyl isothiocyanate (1090.26 µg/L), the most important volatile compounds responsible for the fresh cabbage flavour. The presented results mark off “Čepinski” cultivar as valuable for larger production and further examination.

Cocoa shell is a by-product of the chocolate industry that is rich in dietary fiber and bioactive components. In this research, the influence of high voltage electric discharge (HVED) treatment on chemical and physical characteristics of the cocoa shell, i.e., the effects of applied time and frequencies on grinding ability, water binding capacity (WBC), dietary fibers and tannin content was investigated. HVED had a significant influence on the chemical and physical properties of cocoa shell, all of which could be linked to changes in fiber properties. Along with the fiber content, grinding ability and water binding capacity were increased. These properties have already been linked to fiber content and soluble/insoluble fiber ratio. However, this research implies that change in fiber properties could be linked to tannin formation via complexation of other polyphenolic components. Additional research is needed to verify this effect and to establish mechanisms of tannin formation induced by HVED and its influence on fiber quantification.

Coumarin is a natural product with aromatic and fragrant characteristics, widespread in the entire plant kingdom. It is found in different plant sources such as vegetables, spices, fruits, and medicinal plants including all parts of the plants—fruits, roots, stems and leaves. Coumarin is found in high concentrations in certain types of cinnamon, which is one of the most frequent sources for human exposure to this substance. However, human exposure to coumarin has not been strictly determined, since there are no systematic measurements of consumption of cinnamon-containing foods. The addition of pure coumarin to foods is not allowed, since large amounts of coumarin can be hepatotoxic. However, according to the new European aroma law, coumarin may be present in foods only naturally or as a flavoring obtained from natural raw materials (as is the case with cinnamon). In this paper, the overview of the current European regulations on coumarin levels in food is presented, along with the most common coumarin food sources, with a special emphasis on cinnamon-containing food. Human exposure to coumarins in food is also reviewed, as well as the methods for determination and separation of coumarin and its derivatives in food.

Carbohydrates are important compounds in natural products where they primarily serve as a source of energy, but they have important secondary roles as precursors of aroma or bioactive compounds. They are present in fresh and dried (cured) tobacco leaves as well. The sugar content of tobacco depends on the tobacco variety, harvesting, and primarily on the curing conditions (temperature, time and moisture). If the process of curing employs high temperatures (flue-curing and sun-curing), final sugar content is high. In contrast, when air curing has a lower temperature, at the end of the process, sugar level is low. Beside simple sugars, other carbohydrates reported in tobacco are oligosaccharides, cellulose, starch, and pectin. Degradation of polysaccharides results in a higher yield of simple sugars, but at the same time reduces sugars oxidization and transfer into carbon dioxide and water. Loss of sugar producers will compensate with added sugars, to cover undesirable aroma properties and achieve a better, pleasant taste during smoking. However, tobacco carbohydrates can be precursors for many harmful compounds, including formaldehyde and 5-hydroxymethylfurfural. Keeping in mind that added sugars in tobacco production are unavoidable, it is important to understand all changes in carbohydrates from harvesting to consuming in order to achieve better product properties and avoid the formation of harmful compounds. This review summarizes current knowledge about tobacco carbohydrates, including changes during processing with special focus on carbohydrates as precursors of harmful compounds during smoking.

Starch has been an inexhaustible subject of research for many decades. It is an inexpensive, readily-available material with extensive application in the food and processing industry. Researchers are continually trying to improve its properties by different modification procedures and expand its application. What is mostly applied in this view are their chemical modifications, among which organic acids have recently drawn the greatest attention, particularly with respect to the application of starch in the food industry. Namely, organic acids naturally occur in many edible plants and many of them are generally recognized as safe (GRAS), which make them ideal modification agents for starch intended for the food industry. The aim of this review is to give a short literature overview of the progress made in the research of starch esterification, etherification, cross-linking, and dual modification with organic acids and their derivatives.

Chocolate production is a complex process during which numerous chemical reactions occur. The most important processes, involving most of the reactions important for development of the proper chocolate flavor, are fermentation, drying and roasting of cocoa bean, and chocolate conching. During fermentation, formation of important precursors occurs, which are essential for further chemical reactions in the following processes of chocolate production. Roasting is one of the most important processes due to the occurrence of Maillard’s reactions, during which aroma compounds are formed. In this paper, we have reviewed the most important chemical reactions that occur with proteins, carbohydrates, lipids, and polyphenols. Additionally, we present other components that may be naturally present or form during the production process, such as methylxanthines, aldehydes, esters, ketones, pyrazines, acids, and alcohols.

This is the first study on ultrasound-assisted extraction (UAE) of bioactive compounds from different types of tobacco industry wastes (scrap, dust, and midrib). The obtained results were compared with starting raw material (tobacco leaves) to see the changes in bioactive compounds during tobacco processing. Results suggested that tobacco waste extracts possess antioxidant activity and considerable amounts of targeted bioactive compounds (phenolics and solanesol). The content of chlorogenic acid varied between 3.64 and 804.2 μg/mL, caffeic acid between 2.34 and 10.8 μg/mL, rutin between 11.56 and 93.7 μg/mL, and solanesol between 294.9 and 598.9 μg/mL for waste and leaf extracts, respectively. There were noticeable differences between bioactive compounds content and antioxidant activity in extracts related to applied UAE conditions and the used type of tobacco waste. Results show that optimal UAE parameters obtained by response surface methodology (RSM) were different for each type of material, so process optimization proved to be necessary. Considering that tobacco waste is mostly discarded or not effectively utilized, the results clearly show that tobacco waste could be used as a potential source of some bioactive compounds.

It is well established that part of starch is resistant to human amylases and escapes undigested to large bowel. This fraction of starch is resistant starch. Recent studies have shown that resistant starch may be a substrate for bacterial flora of the colon and serves as prebiotic. Short chain fatty acids (SCFA) produced by colonic fermentation of resistant starch may have impact on colonic function and health of humans. This paper summarises current knowledge on properties and health impact of resistant starch.

Starches were isolated from three oat (Dzoker, Zvolen and Sampionka) and three barley (Barun, Zlatko and Vanessa) cultivars. The gelatinisation and retrogradation characteristics, pasting properties, swelling power, and solubility of the isolated starches were analysed. The gelatinisation onset temperatures varied from 59.4°C to 61.4°C for the oat starches (OS), and from 58.4°C to 62.2°C for the barley starches (BS). BS displayed a higher retrogradation enthalpy (ΔHr) than OS after 7 and 14 days storage at 4°C. OS-Sampionka had the lowest one while BS-Vanessa had the highest ΔHr after 7 and 14 days of storage. Significant differences in pasting properties were observed between the OS and BS. OS showed higher values of maximum viscosity than BS and followed the order: OS-Dzoker > OS-Sampionka > OS-Zvolen > BS-Vanessa > BS-Zlatko > BS-Barun. The breakdown viscosities of BS were considerably lower than those of OS. OS had higher swelling power and solubility values than BS. The higher swelling and solubility values of the oat starches in conjunction with lower retrogradation suggest different applications of these starches. The results showed that, while the barley starches are suitable for such applications where high stability is needed during heating and shearing (low breakdown values), the oat starches have a great potential for the applications where high stability during storage is needed (low ΔHr values). In addition, the barley starches are suitable for those applications where high water binding is undesirable, while the oat starches are applicable where low amounts of starch need to bind high proportions of water

Marine macroalgae represent a rich source of bioactive compounds that can be implemented in various food, cosmetic, and pharmaceutical products for health improvement. It has been proven that these bioactive compounds, such as polyphenols, polysaccharides, carotenoids, and ω-3 fatty acids possess bioactivity. For the extraction of these compounds, modern methods (Supercritical Fluid Extraction (SFE), Subcritical Water Extraction (SWE), Ultrasound-Assisted Extraction (UAE), and Microwave-Assisted Extraction (MAE)) have been used due to their advantages over the conventional methods. The process parameters of each method must be optimized for obtaining the extracts with the targeted bioactive compounds. In distinction from the existing reviews, the present review provides novelty with respect to: (a) presenting systematically the selected process parameters of SFE (temperature, time, pressure, use of co-solvents), SWE (temperature, time, pressure, solid-solvent ratio), UAE (temperature, time, frequency, power, solid-solvent ratio), and MAE (temperature, time, frequency, power, solvent type) applied for the extractions of marine macroalgae; (b) reporting the major groups or individual compounds extracted with their biological activities (if determined); and, (c) updating available references.

Solving the problem of large quantities of organic waste, which represents an enormous ecological and financial burden for all aspects of the process industry, is a necessity. Therefore, there is an emerged need to find specific solutions to utilize raw materials as efficiently as possible in the production process. The cocoa shell is a valuable by-product obtained from the chocolate industry. It is rich in protein, dietary fiber, and ash, as well as in some other valuable bioactive compounds, such as methylxanthines and phenolics. This paper gives an overview of published results related to the cocoa shell, mostly on important bioactive compounds and possible applications of the cocoa shell in different areas. The cocoa shell, due to its nutritional value and high-value bioactive compounds, could become a desirable raw material in a large spectrum of functional, pharmaceutical, or cosmetic products, as well as in the production of energy or biofuels in the near future.

Large amounts of residues are produced in the food industries. The waste shells from cocoa processing are usually burnt for fuel or used as a mulch in gardens to add nutrients to soil and to suppress weeds. The objectives of this work were: (a) to separate valuable compounds from cocoa shell by applying sustainable green separation process—subcritical water extraction (SWE); (b) identification and quantification of active compounds, sugars and sugar degradation products in obtained extracts using HPLC; (c) characterization of the antioxidant activity of extracts; (d) optimization of separation process using response surface methodology (RSM). Depending on applied extraction conditions, different concentration of theobromine, caffeine, theophylline, epicatechin, catechin, chlorogenic acid and gallic acid were determined in the extracts obtained by subcritical water. Furthermore, mannose, glucose, xylose, arabinose, rhamnose and fucose were detected as well as their important degradation products such as 5-hydroxymethylfurfural (5-HMF), furfural, levulinic acid, lactic acid and formic acid.

The aim of this research was to investigate the effect of hydrocolloid carrageenan, native tapioca starch and powdered whey on viscosity and thermophysical properties of model ice-cream mixtures with reduced content of sugar and fat. Measurements were performed immediately after mixture preparation and after two months of storage at -18 °C. Results showed that rheological properties of model ice-cream mixtures with reduced content of sugar and fat can be improved by addition of starch and whey, particularly at low temperatures (0 and -5 °C). Improvement of properties at low temperatures is particularly important for before mentioned group of products, as well as the fact that raw materials used in the recipes are cost effective and have high nutritive value. Two-month storage at -18 °C resulted in increase of rheological parameters of all investigated samples. Freeze and thaw temperatures of model mixtures were not changed significantly after two months of storage. On the other hand, enthalpies of freezing and thawing have after storage in the most cases decreased.

The effects of high power ultrasound of 24 kHz and ultrasound bath of 24 kHz frequency on the textural and pasting properties of corn starch suspensions was examined. Suspensions were treated with different intensities and treatment times (15 min and 30 min) using an ultrasound probe set and bath. The treatments with high power ultrasound probes caused a significant lowering of the starting gelatinisation temperatures of corn starch. The ultrasound treatment caused disruption of starch granules by cavitational forces and made the granules more permeable to water. The highest viscosity was observed for the treatment with 300 W probe. Also, a statistically significant increase in solubility in water (20°C) was observed, being caused by the disruption of starch granules and molecules by ultrasound treatment. When applying more powerful ultrasound, starch granules, specifically in the amorphous region, are much more mechanically damaged. The texture profile analyses of the starch gel prepared from the suspensions that had been treated with ultrasound probe presented higher hardness and higher values of adhesiveness and cohesiveness when compared with untreated suspensions or those treated with ultrasound bath. Micrography showed an obvious impact of ultrasound on the structure of starch granules. Ultrasound treatment ruptures and mechanically damages the starch granules causing collapse of cavitation bubbles which induces high pressure gradients and high local velocities of the liquid layers in their vicinity.

The effects of trehalose, glucose, fructose, and sucrose on the gelatinisation and retrogradation properties of corn (CS) and tapioca (TS) starches were studied with differential scanning calorimetry (DSC). The results showed that the sugars affect gelatinisation and retrogradation of both starches, with the effect varying significantly between sugars. The addition of trehalose, glucose, fructose, and sucrose increased the gelatinisation temperatures and enthalpy of gelatinisation of corn and tapioca starches. The extent of increase followed the order: fructose < glucose < trehalose < sucrose with CS, and fructose < trehalose < sucrose < glucose with TS. The retrogradation studies showed that sugars of lower molecular weights (glucose and fructose) were less effective in the reduction of retrogradation than those of higher molecular weights (sucrose and trehalose). Trehalose retarded retrogradation of both corn and tapioca starches under all conditions investigated. Sucrose had the same effect on the corn starch retrogradation. The effects of other sugars depended on the type of starch, storage period, and storage temperature.

Colour and texture are very important quality properties of all foods. In this work, the influence was investigated of different types of pectin on colour and textural properties in strawberry jams and low-calorie strawberry jams containing fructose and aspartame or fructose syrup and aspartame. The highest anthocyanin content and total phenol content were detected in strawberry jam samples prepared with low methoxy amidated pectin. During storage, after 4 and 6 weeks at both storage temperatures, room temperature and 4°C, anthocyanin content and total phenol content decreased. Also, free radical scavenging activity decreased during storage. As far as the texture parameters are concerned, namely firmness, consistency and cohesiveness, the highest values were found in strawberry jam samples prepared with high methoxyl pectin.

The effects of hydrocolloids pectin, carrageenan, as well as of pectin/carrageenan mixtures on gelatinisation, retrogradation, rheological characteristics, and swelling power of tapioca starch were studied with Brookfield rotational viscometer and differential scanning calorimeter (DSC). The results showed that hydrocolloids retarded the retrogradation of tapioca starch. Enthalpy and temperatures of gelatinisation, as well as solubility, did not vary significantly in starch-hydrocolloid systems. Viscosity of tapioca starch increased on the addition of hydrocolloids: the effect of carrageenan on viscosity was more remarkable than that of pectin.

Six medicinal plants Helichrysum italicum (Roth) G. Don, Angelica archangelica L., Lavandula officinalis L., Salvia officinalis L., Melilotus officinalis L., and Ruta graveolens L. were used. The aim of the study was to compare their extracts obtained by Soxhlet (hexane) extraction, maceration with ethanol (EtOH), and supercritical CO2 extraction (SC-CO2) targeted on coumarin content (by high performance liquid chromatography with ultraviolet detection, HPLC-UV), 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) scavenging capacity, and total phenols (TPs) content (by Folin–Ciocalteu assay). The highest extraction yields were obtained by EtOH, followed by hexane and SC-CO2. The highest coumarin content (316.37 mg/100 g) was found in M. officinalis EtOH extracts, but its SC-CO2 extraction yield was very low for further investigation. Coumarin was also found in SC-CO2 extracts of S. officinalis, R. graveolens, A. archangelica, and L. officinalis. EtOH extracts of all plants exhibited the highest DPPH scavenging capacity. SC-CO2 extracts exhibited antiradical capacity similar to hexane extracts, while S. officinalis SC-CO2 extracts were the most potent (95.7%). EtOH extracts contained the most TPs (up to 132.1 mg gallic acid equivalents (GAE)/g from H. italicum) in comparison to hexane or SC-CO2 extracts. TPs content was highly correlated to the DPPH scavenging capacity of the extracts. The results indicate that for comprehensive screening of different medicinal plants, various extraction techniques should be used in order to get a better insight into their components content or antiradical capacity.