Search

In this article Part II, we consider the application of ienaic modeling for solvent extraction of rare earths in the case of the mixed DMDOHEMA/HDEHP extractant system. The system exhibits a synergistic extraction effect depending on the acid concentration and the extractant mole fraction, as demonstrated in the experimental article Part I. In this work, we directly compare experimental findings with theoretical predictions of the droplet model. The model considers the effective free energy of transfer as a combination of competing molecular forces, but contrary to previous micelle models that focus only on the dominant stoichiometry, it allows calculations of free energies of every possible spherical aggregate. The resulting image of the extraction process is that different behaviors can be obtained depending on the acidity and mole fraction of extractants, which are associated with different aggregation regimes in a complex free energy landscape of the system. Nevertheless, self-assembly is tuned by the extraction of all solutes, and not only the target metal cations. [ABSTRACT FROM AUTHOR]

Efficient formulations used in hydrometallurgy are often based on synergistic action of two oil-soluble extractants at an optimized mole fraction. In this series of two papers, we describe the N,N'-dimethyl-N,N'-dioctylhexylethoxymalonamide (DMDOHEMA)/di(2-ethylexyl) phosphoric acid (HDEHP) system, and how expression of the synergistic effect varies with acidity, using the three common representations: distribution ratios, yields, and free energies of transfer. The experimental results are detailed in this first part (Part I) with the so-called supramolecular approach, which considers the reverse micelle-like aggregates formed by the lipophilic extractant molecules. It shows that no specific aggregation state is observed at the maximum of synergism and antagonism. Besides, the critical aggregation concentration that characterizes the micellization free energy appears to follow some synergistic trends but cannot explain how acid tunes synergism to antagonism of this mixed system. Based on these results, Part II proposes a theoretical model based on the ienaic approach to interpret acid effect on synergism and antagonism. [ABSTRACT FROM AUTHOR]

Here we present a series of complete phase prisms for water, an organic diluent and di-(2-ethylhexyl) phosphoric acid (HDEHP), one of the most widely used double-branched lipophilic surfactants in hydrometallurgy. Partial or total titration with sodium hydroxide evidence that the mole fraction of the counter-cation “Z” is the variable that controls the packing and spontaneous curvature of the curved film formed by this extractant. Penetrating solvents such as toluene and iso-octane and the non-penetrating solvent dodecane as well as common hydrotropes acting as co-solvents, are considered. The three classical cuts of the phase prism are shown. The regions for which liquid–liquid extraction is possible are determined, as well as the location of the liquid crystals at the origin of the often observed third-phase formation. It is shown that profoundly different trends are obtained when replacing the common solvents currently used in hydrometallurgical processes with hydrotropes.

In liquid–liquid extraction, synergism emergeswhen fora defined formulation of the solvent phase, there is an increase ofdistribution coefficients for some cations in a mixture. To characterizethe synergistic mechanisms, we determine the free energy of mixedcoassembly in aggregates. Aggregation in any point of a phase diagramcan be followed not only structurally by SANS, SAXS, and SLS, butalso thermodynamically by determining the concentration of monomerscoexisting with reverse aggregates. Using the industrially used coupleHDEHP/TOPO forming mixed reverse aggregates, and the representativecouple U/Fe, we show that there is no peculiarity in the aggregatesmicrostructure at the maximum of synergism. Nevertheless, the freeenergy of aggregation necessary to form mixed aggregates containingextracted ions in their polar core is comparable to the transfer freeenergy difference between target and nontarget ions, as deduced fromthe synergistic selectivity peak. [ABSTRACT FROM AUTHOR]

In the context of the separation of uranium and plutonium from spent fuel allowed by N,N -dialkylamides, three regioisomers of N,N -di(2-ethylhexyl) butyramide (DEHBA or ββ) and the diastereopure isomers of N -(2-ethylhexyl)- N -(oct-3-yl)butyramide (EHOBA or αβ) were synthesized to assess their extraction performance and to study the mechanisms at the origin of the differences observed between the stereo- and regioisomers. The N,N -dialkylamides showed differences in extraction, with a greater effect of regio- than stereoisomerism. A mechanistic study at both the molecular and supramolecular scales was initially applied to explain these effects. X-ray absorption and UV-vis spectroscopy showed that uranium is extracted by a UO 2 (NO 3 ) 2 L 2 complex, which is not very sensitive to steric hindrance, while plutonium is extracted by two complexes, Pu(NO 3 ) 4 L 2 and Pu(NO 3 ) 6 (HL) 2 , which are differently affected by stereo- and regioisomerism. Investigations at the supramolecular scale also showed that Pu(NO 3 ) 4 L 2 complexes are disadvantaged by the bulkiness of the extractants, while Pu(NO 3 ) 6 (HL) 2 is favored by the preformation of larger supramolecular aggregates.

Silica-based porous liquids (PLs) are innovative and versatile liquid materials with a high potential, although their application is often restricted to gas sorption. In this work, we propose to evaluate their potential to extract metals. For this goal, we have adapted their synthesis to provide PLs functionalized with thiols that are expected to chelate metallic contaminants, such as lead. As the accessibility of liquids and metals to the PL's porous network is one of the key points for their application, we developed an original small-angle neutron scattering experiment to verify that the PL is permeable to polar liquids. Then, preliminary extraction tests have successfully been carried out, with an extraction of lead cations by complexation on one-third of accessible thiol groups. This work demonstrates that the extraction of metal species by a PL is possible and opens many perspectives for optimization.

Developing greener hydrometallurgical processes implies offering alternatives to conventional solvents used for liquid-liquid extraction (LLE) of metals. In this context, it is proposed to substitute the organic phase by a hydrophobic silica-based porous liquid (PL). Two different sulfonated hollow silica particles (HSPs) are modified with various polyethoxylated fatty amines (EthAs) forming a canopy that provides both the targeted hydrophobicity and liquefying properties. This study shows that these properties can be tuned by varying the number of ethylene oxide units in the EthA: middle-range molecular weight EthAs allow obtaining a liquid at room temperature, while too short or too long EthA leads to solid particles. Viscosity is also impacted by the density and size of the silica spheres: less viscous PLs are obtained with small low-density spheres, while for larger spheres (c.a. 200 nm) the density has a less significant impact on viscosity. According to this approach, hydrophobic PLs are successfully synthesized. When contacted with an aqueous phase, the most hydrophobic PLs obtained allow a subsequent phase separation. Preliminary extraction tests on three rare earth elements have further shown that functionalization of the PL is necessary to observe metal extraction., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Transferrin (Tf) is a glycoprotein that transports iron from the serum to the various organs. Several studies have highlighted that Tf can interact with metals other than Fe(III), including actinides that are chemical and radiological toxics. We propose here to report on the behavior of Th(IV) and Pu(IV) in comparison with Fe(III) upon Tf complexation. We considered UV-Vis and IR data of the M 2 Tf complex (M=Fe, Th, Pu) and combined experimental EXAFS data with MD models. EXAFS data of the first M-O coordination sphere are consistent with the MD model considering 1 synergistic carbonate. Further EXAFS data analysis strongly suggests that contamination by Th/Pu colloids seems to occur upon Tf complexation, but it seems limited. SAXS data have also been recorded for all complexes and also after the addition of Deferoxamine-B (DFOB) in the medium. The Rg values are very close for apoTf, ThTf and PuTf, but slightly larger than for holoTf. Data suggest that the structure of the protein is more ellipsoidal than spherical, with a flattened oblate form. From this data, the following order of conformation size might be considered:holoTf2 Tf (M=Th, Pu)2 Tf-DFOB (M=Fe, Th, Pu)., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

This study presents a comprehensive investigation of the aggregation behavior of a malonamide extractant molecule ( N , N '-dimethyl, N , N '-dioctylhexylethoxymalonamide (DMDOHEMA)) in three different solvents, including two piperidinium- and (trifluoromethylsulfonyl)imide-based ionic liquids (1-ethyl-1-butylpiperidinium bis(trifluoromethylsulfonyl)imide ([EBPip + ][NTf 2 - ]) and 1-ethyl-1-octylpiperidinium bis(trifluoromethylsulfonyl)imide ([EOPip + ][NTf 2 - ])) and n -dodecane. By combining polarizable molecular dynamics simulations and small-angle X-ray scattering experiments, we extensively investigated the arrangement of supramolecular assemblies of the extractant molecules. Our results showed that the insertion of the alkyl chains of the extractant molecules into the apolar domain of [EOPip + ][NTf 2 - ] has a significant impact on the aggregation behavior of the extractant molecules, leading to the formation of smaller aggregates having a higher dispersion compared to other solvents. These findings provide new insights into the physicochemical properties of this type of system and are crucial in designing more effective solvents for rare earth metal extraction.

The nanoscale organization of some classes of ionic liquids is responsible for their singular properties. In this paper, we use polarizable molecular dynamics simulations and small-angle X-ray scattering to probe the structure of two piperidinium- and (trifluoromethylsulfonyl)imide-based ionic liquids ([EBPip + ][NTf 2 - ] and [EOPip + ][NTf 2 - ]) that differ in the alkyl chain length of their cation. The X-ray scattering intensities calculated numerically, from the radial distribution functions, are in excellent agreement with the experimental data. The analysis of the different contributions of the X-ray scattering data allowed us to highlight the correlations responsible for the low q peak observed for the long-chain alkyl cations. New angular analyses showed that anions were more likely to align with alkyl chains as their size increased, inducing angular correlation between anions at larger distances. They also showed that the long alkyl chains of the cations aligned more with each other than the short ones. These more aligned alkyl chains induce a smaller volume of the apolar microdomains compared to the well-studied imidazolium-based ionic liquids, leading to the smaller correlation distance for piperidinium-based ionic liquids.

The size and shape of a water-soluble hexanuclear plutonium cluster were probed by combining synchrotron small-angle X-ray scattering (SAXS) and extended X-ray absorption fine structure (EXAFS). A specific setup coupling both techniques and dedicated to radioactive samples on the MARS beamline endstation at Synchrotron SOLEIL is described. The plutonium hexanuclear cores are well stabilized by the 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid ligands and this allows a good evaluation of the setup to probe the very small plutonium core. The results show that, in spite of the constrained conditions required to avoid any risk of sample dispersion, the flux and the sample environment are optimized to obtain a very good signal-to-noise ratio, allowing the detection of small plutonium aggregates in an aqueous phase. The structure of the well defined hexanuclear cluster has been confirmed by EXAFS measurements in solution and correlated with SAXS data processing and modelling. An iterative comparison of classical fit models (Guinier or sphere form factor) with the experimental results allowed a better interpretation of the SAXS signal that will be relevant for future work under environmentally relevant conditions., (open access.)

DEHCNPB (butyl- N , N -di(2-ethylhexyl)carbamoyl-nonylphosphonate) is an amido-phosphonic acid that has remarkable properties for the separation of uranium from wet phosphoric acid. Despite previous studies, a detailed description of the DEHCNPB organic solutions at the supramolecular and molecular scales is missing. In the present work, we use classical Molecular Dynamics (MD) combined with SANS and SAXS experimental data in order to describe the aggregation of the bifunctional extractant DEHCNPB as well as the speciation of uranium(VI) in such systems. We provide a fine description of the molecular species in the organic solution and of the interactions within the aggregates formed, shedding light on solvent extraction mechanisms. Without uranium, the organic phase is highly composed of dimers and trimers H-bonded through phosphonate functions and without water molecules. With uranium, two to three extractant molecules coordinate directly the uranyl cation by their phosphonate groups. Uranyl is not fully dehydrated in this organic solution, and the amide groups of the extractants are found to form H-bonds with the water molecules bound to uranyl. These H-bond networks around the metallic cation stabilize the complexes and facilitate the extraction. These results underline the importance of considering weak interactions in the understanding of extraction processes and demonstrate how molecular simulations provide essential insights into such complex organic phase chemistry with a high number of species .

Based on silica hollow nanospheres grafted with an ionic shell, silica-based type I porous liquids remain poorly exploited, despite their huge versatility. We propose here to explore the main synthesis step of these promising materials with a thorough characterization approach to evaluate their structural and porous properties. Modifying the main synthesis parameter, the mechanism of the spheres' formation is clarified and shows that the calcination temperature, the surfactant concentration as well as the micelle swelling agent concentration allow tuning not only the size of the nanospheres and internal cavities, but also the silica shell microporosity and, therefore, the accessibility of the internal cavities. This study highlights the key parameters of hollow silica nanospheres, which are at the basis of type I porous liquids synthesis with optimized structural and porous properties.

Phase modifiers are often added to solvent extraction processes to avoid the third-phase formation. While this important issue was attributed to sticky interactions between reverse aggregates, structural effects of phase modifiers remain ambiguous. As they are similar to reverse hydrotropes, phase modifiers may act as cosurfactants or cosolvents in the organic phase in a solvent extraction system. We therefore applied an innovative small-angle scattering approach coupled with surface tension measurements on the industrially applied AMEX process to evaluate how phase modifiers repel the third phase and affect the extraction properties. We first confirmed that adding 1-octanol has a small influence on the extraction performance. By varying the scattering contrast of the solution with deuterated 1-octanol, we found that 1-octanol is located both in the solvent, acting as a cosolvent and diluting the aggregates, and in an outer shell of the aggregates. Further surface tension measurements demonstrated that instead of penetrating till the core of the aggregates as a cosurfactant, 1-octanol only penetrates their shell and forms a shielding barrier avoiding the coalescence of aggregates.

Knowledge of the complex microstructure in solvent extraction phases is mandatory for a full comprehension of ionic separation. Coupling EXAFS with MD simulations for uranyl extraction in sulfuric media with tertiary amine extractants enabled unravelling of the unprecedented uranyl tri-sulfate structure.

We show in the case of N,N'-dimethyl-N,N'-dioctyl-2-(2(hexyloxy)ethyl)-malonamide (DMDOHEMA) chosen as a typical oil-soluble extractant with surface activity that the free energy of formation of reverse micelles in the solvent phase strongly depends on the presence of polar solutes. Free energies per molecule vary typically from 0 to 2 kT per molecule (5 kJ mol(-1)), depending on the kosmotropic/chaotropic nature of the anion extracted. Variations of the reverse aggregation free energy introduced by acids and other co-extracted solutes as deduced from the critical aggregation concentrations cannot be neglected while modelling extraction. With typical aggregation numbers of 4-6, the free energy of formation of one reverse aggregate varies up to 20 kJ mol(-1), which is four times the typical difference in free energy of one single cation transfer between a "target" and a non-target ion in practical extraction and stripping industrial processes.

This contribution reports a method delivering inorganic nanopatterned and functional surfaces from the ion beam etching of mesoporous thin films. The nanoscaled patterns are spherical or cylindrical cavities that are arranged on a macroscale. A variety of chemical functions can be grafted selectively in the cavities to add specific interactions with functional nanoparticles to be positioned. The process opens a simple route to localize and organize functional spherical or linear nanoparticles on extended surfaces.

Structural and rheological features of a series of molecular hydrogels formed by synthetic bile salt analogues have been scrutinized. Among seven gelators, two are neutral compounds, while the others are cationic systems among which one is a tripodal steroid derivative. Despite the fact that the chemical structures are closely related, the variety of physical characteristics is extremely large in the structures of the connected fibers (either plain cylinders or ribbons), in the dynamical modes for stress relaxation of the associated SAFINs, in the scaling laws of the shear elasticity (typical of either cellular solids or fractal floc-like assemblies), in the micron-scale texture and the distribution of ordered domains (spherulites, crystallites) embedded in a random mesh, in the type of nodal zones (either crystalline-like, fiber entanglements, or bundles), in the evolution of the distribution and morphology of fibers and nodes, and in the sensitivity to added salt. SANS appears to be a suitable technique to infer all geometrical parameters defining the fibers, their interaction modes, and the volume fraction of nodes in a SAFIN. The tripodal system is particularly singular in the series and exhibits viscosity overshoots at the startup of shear flows, an "umbrella-like" molecular packing mode involving three molecules per cross section of fiber, and scattering correlation peaks revealing the ordering and overlap of 1d self-assembled polyelectrolyte species.

Optically transparent and highly ordered mesoporous organosilica thin films functionalized with two different organic groups in various proportions were synthesized by templated-directed cocondensation of tetraethylorthosilicate (TEOS) and a mixture of two distinct and functional organotriethoxysilanes [NC(CH2)3Si(OEt)3 and O=P(OEt)2(CH2)3Si(OEt)3]. The mesostructured films obtained by evaporation induced self-assembly (EISA) approach were deposited on glass or silicon substrates by dip-coating. They were characterized by Grazing Incidence Small Angle X-ray Scattering (GISAXS) and X-ray reflectivity. We showed that whatever the proportion in organic groups, only 2D hexagonal phase having p6m symmetry was observed for all the materials indicating a good compatibility between the organic groups. The bi-functionalization of the internal pores surface by the organotriethoxysilanes groups was clearly evidenced by using micro-Raman spectroscopy.