Search

Carbon nitrides featuring three-dimensional frameworks of CN4 tetrahedra are one of the great aspirations of materials science, expected to have a hardness greater than or comparable to diamond. After more than three decades of efforts to synthesize them, no unambiguous evidence of their existence has been delivered. Here, the high-pressure high-temperature synthesis of three carbon-nitrogen compounds, tI14-C3N4, hP126-C3N4, and tI24-CN2, in laser-heated diamond anvil cells, is reported. Their structures are solved and refined using synchrotron single-crystal X-ray diffraction. Physical properties investigations show that these strongly covalently bonded materials, ultra-incompressible and superhard, also possess high energy density, piezoelectric, and photoluminescence properties. The novel carbon nitrides are unique among high-pressure materials, as being produced above 100 GPa they are recoverable in air at ambient conditions., Funding: National Science Foundation - Earth Sciences; DOE Office of Science; Deutsche Forschungsgemeinschaft (DFG) [EAR - 1634415]; UKRI Future Leaders Fellowship [DE-AC02-06CH11357]; DFG [LA-4916/1-1, DU 945/15-1, DU 393-9/2, DU 393-13/1, MR/V025724/1]; DFG [DU 954-11/1]; BIOVIA [INST 91/315-1 FUGG, INST 91/251-1 FUGG]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University; Swedish Research Council (VR); Knut and Alice Wallenberg Foundation [2009 00971]; Swedish Research Council [2019-05600]; RSF [KAW-2018.0194]; [2022-06725]; [2018-05973]; [22-12-00193]

The yttrium-hydrogen system has gained attention because of near-ambient temperature superconductivity reports in yttrium hydrides at high pressures. We conducted a study using synchrotron single-crystal x-ray diffraction (SCXRD) at 87 to 171 GPa, resulting in the discovery of known (two YH3 phases) and five previously unknown yttrium hydrides. These were synthesized in diamond anvil cells by laser heating yttrium with hydrogen-rich precursors-ammonia borane or paraffin oil. The arrangements of yttrium atoms in the crystal structures of new phases were determined on the basis of SCXRD, and the hydrogen content estimations based on empirical relations and ab initio calculations revealed the following compounds: Y3H11, Y2H9, Y4H23, Y13H75, and Y4H25. The study also uncovered a carbide (YC2) and two yttrium allotropes. Complex phase diversity, variable hydrogen content in yttrium hydrides, and their metallic nature, as revealed by ab initio calculations, underline the challenges in identifying superconducting phases and understanding electronic transitions in high-pressure synthesized materials., Funding Agencies|Deutsche Forschungsgemeinschaft (DFG) [BY112/2-1, DU 954-11/1, DU 393-9/2, DU 393-13/1, DU 945/15- 1]; UKRI Future Leaders Fellowship [MR/V025724/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoeping University [2009 00971]; NSF-earth Sciences [EAR-1634415]; DOE Office of Science [DE-AC02- 06CH11357]; Open Access Publishing Fund of the University of Bayreuth

Nitrogen catenation under high pressure leads to the formation of polynitrogen compounds with potentially unique properties. The exploration of the entire spectrum of poly- and oligo-nitrogen moieties is still in its earliest stages. Here, we report on four novel scandium nitrides, Sc2N6, Sc2N8, ScN5, and Sc4N3, synthesized by direct reaction between yttrium and nitrogen at 78-125 GPa and 2500 K in laser-heated diamond anvil cells. High-pressure synchrotron single-crystal X-ray diffraction reveals that in the crystal structures of the nitrogen-rich Sc2N6, Sc2N8, and ScN5 phases nitrogen is catenated forming previously unknown N-6(6)- and N-8(6)- units and infinity 2(N-5(3-)) anionic corrugated 2D-polynitrogen layers consisting of fused N-12 rings. Density functional theory calculations, confirming the dynamical stability of the synthesized compounds, show that Sc2N6 and Sc2N8 possess an anion-driven metallicity, while ScN5 is an indirect semiconductor. Sc2N6, Sc2N8, and ScN5 solids are promising high-energy-density materials with calculated volumetric energy density, detonation velocity, and detonation pressure higher than those of TNT., Funding Agencies|National Science Foundation - Earth Sciences [EAR - 1634415]; DOE Office of Science by Argonne National Laboratory [DE-AC02-06CH11357]; UKRI Future Leaders Fellowship [MR/V025724/1]; Deutsche Forschungsgemeinschaft (DFG) [DU 945/15-1, LA 4916/1-1, DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoeping University [2009 00971]; Open Access Publishing Fund of the University of Bayreuth; Projekt DEAL

The field of polyhalogen chemistry, specifically polyhalogenanions(polyhalides), is rapidly evolving. Here, we present the synthesisof three sodium halides with unpredicted chemical compositions andstructures (tP10-Na2Cl3, hP18-Na4Cl5, and hP18-Na4Br5), a series of isostructural cubic cP8-AX(3) halides (NaCl3, KCl3, NaBr3, and KBr3), and a trigonal potassiumchloride (hP24-KCl3). The high-pressuresyntheses were realized at 41-80 GPa in diamond anvil cellslaser-heated at about 2000 K. Single-crystal synchrotron X-ray diffraction(XRD) provided the first accurate structural data for the symmetrictrichloride Cl-3 (-) anion in hP24-KCl3 and revealed the existence of two different typesof infinite linear polyhalogen chains, [Cl]( infinity ) ( n-) and [Br]( infinity ) ( n-), in the structures of cP8-AX(3) compounds and in hP18-Na4Cl5 and hP18-Na4Br5. In Na4Cl5 and Na4Br5, we found unusually short, likely pressure-stabilized, contactsbetween sodium cations. Ab initio calculations support the analysisof structures, bonding, and properties of the studied halogenides., Funding Agencies|China Scholarship Council (CSC); Federal Ministry of Education and Research, Germany (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [MR/V025724/1]; UKRI Future Leaders Fellowship [2019-05600]; Knut and Alice Wallenberg Foundation (Wallenberg Scholar grant) [2022-06725]; Swedish Research Council (VR) [BY112/2-1]; Swedish Research Council

A series of isostructural Ln(3)O(2)(CN3) (Ln=La, Eu, Gd, Tb, Ho, Yb) oxoguanidinates was synthesized under high-pressure (25-54 GPa) high-temperature (2000-3000 K) conditions in laser-heated diamond anvil cells. The crystal structure of this novel class of compounds was determined via synchrotron single-crystal X-ray diffraction (SCXRD) as well as corroborated by X-ray absorption near edge structure (XANES) measurements and density functional theory (DFT) calculations. The Ln(3)O(2)(CN3) solids are composed of the hitherto unknown CN35- guanidinate anion-deprotonated guanidine. Changes in unit cell volumes and compressibility of Ln(3)O(2)(CN3) (Ln=La, Eu, Gd, Tb, Ho, Yb) compounds are found to be dictated by the lanthanide contraction phenomenon. Decompression experiments show that Ln(3)O(2)(CN3) compounds are recoverable to ambient conditions. The stabilization of the CN35- guanidinate anion at ambient conditions provides new opportunities in inorganic and organic synthetic chemistry., Funding Agencies|National Science Foundation; DOE Office of Science by Argonne National Laboratory; UKRI Future Leaders Fellowship; Deutsche Forschungsgemeinschaft (DFG) [DE-AC02-06CH11357, MR/V025724/1, 2009 00971]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University; Projekt DEAL; [DU 954-11/1]; [DU 393-9/2]; [DU 393-13/1]; [DU 945/15-1]; [EAR- 1634415]

Chemical reactions between dysprosium and carbon were studied in laser-heated diamond anvil cells at pressures of 19, 55, and 58 GPa and temperatures of similar to 2500 K. In situ single-crystal synchrotron X-ray diffraction analysis of the reaction products revealed the formation of novel dysprosium carbides, Dy4C3 and Dy3C2, and dysprosium sesquicarbide Dy2C3 previously known only at ambient conditions. The structure of Dy4C3 was found to be closely related to that of dysprosium sesquicarbide Dy2C3 with the Pu2C3-type structure. Ab initio calculations reproduce well crystal structures of all synthesized phases and predict their compressional behavior in agreement with our experimental data. Our work gives evidence that high-pressure synthesis conditions enrich the chemistry of rare earth metal carbides., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]; UKRI Future Leaders Fellowship [MR/V025724/1]

The recent high-pressure synthesis of pentazolates and the subsequent stabilization of the aromatic [N-5](-) anion at atmospheric pressure have had an immense impact on nitrogen chemistry. Other aromatic nitrogen species have also been actively sought, including the hexaazabenzene N-6 ring. Although a variety of configurations and geometries have been proposed based on ab initio calculations, one that stands out as a likely candidate is the aromatic hexazine anion [N-6](4-). Here we present the synthesis of this species, realized in the high-pressure potassium nitrogen compound K9N56 formed at high pressures (46 and 61 GPa) and high temperature (estimated to be above 2,000 K) by direct reaction between nitrogen and KN3 in a laser-heated diamond anvil cell. The complex structure of K9N56-composed of 520 atoms per unit cell-was solved based on synchrotron single-crystal X-ray diffraction and corroborated by density functional theory calculations. The observed hexazine anion [N-6](4-) is planar and proposed to be aromatic., Funding: Alexander von Humboldt Foundation; Deutsche Forschungsgemeinschaft (DFG) [LA-4916/1-1, DU 954-11/1, DU 393-9/2, DU 393-13/1]; UKRI Future Leaders Fellowship [MR/V025724/1]; Federal Ministry of Education and Research, Germany (BMBF) [05K19WC1]; Swedish Research Council (VR) [2019-05600]; Swedish Government Strategic Research Areas in Materials Science on Functional Materials at Linkoeping University [2009 00971]; SeRC; Knut and Alice Wallenberg Foundation (Wallenberg Scholar grant) [KAW-2018.0194]

A high-pressure (HP) yttrium allotrope, hP3-Y (space group P6/mmm), was synthesized in a multi-anvil press at 20 GPa and 2000 K which is recoverable to ambient conditions. Its relative stability and electronic properties were investigated using density functional theory calculations. A hP3-Y derivative hydride, hP3-YHx, with a variable hydrogen content (x = 2.8, 3, 2.4), was synthesized in diamond anvil cells by the direct reaction of yttrium with paraffin oil, hydrogen gas, and ammonia borane upon laser heating to similar to 3000 K at 51, 45 and 38 GPa, respectively. Room-temperature decompression leads to gradual reduction and eventually the complete loss of hydrogen at ambient conditions. Isostructural hP3-NdHx and hP3-GdHx hydrides were synthesized from Nd and Gd metals and paraffin oil, suggesting that the hP3-Y structure type may be common for rare-earth elements. Our results expand the list of allotropes of trivalent lanthanides and their hydrides and suggest that they should be considered in the context of studies of HP behavior and properties of this broad class of materials., Funding Agencies|UKRI Future Leaders Fellowship [MR/V025724/1]; Federal Ministry of Education and Research, Germany [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG) [STE1105/13-2]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [DU 954-11/1]; DFG [DU 393-9/2, DU 393-13/1]; [2009 00971]

This paper presents the Domain Auto Finder (DAFi) program and its application to the analysis of single-crystal X-ray diffraction (SC-XRD) data from multiphase mixtures of microcrystalline solids and powders. Superposition of numerous reflections originating from a large number of single-crystal domains of the same and/or different (especially unknown) phases usually precludes the sorting of reflections coming from individual domains, making their automatic indexing impossible. The DAFi algorithm is designed to quickly find subsets of reflections from individual domains in a whole set of SC-XRD data. Further indexing of all found subsets can be easily performed using widely accessible crystallographic packages. As the algorithm neither requires a priori crystallographic information nor is limited by the number of phases or individual domains, DAFi is powerful software to be used for studies of multiphase polycrystalline and microcrystalline (powder) materials. The algorithm is validated by testing on X-ray diffraction data sets obtained from real samples: a multi-mineral basalt rock at ambient conditions and products of the chemical reaction of yttrium and nitrogen in a laser-heated diamond anvil cell at 50 GPa. The high performance of the DAFi algorithm means it can be used for processing SC-XRD data online during experiments at synchrotron facilities., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

Transition metal borides are known due to their attractive mechanical, electronic, refractive, and other properties. A new class of rhenium borides was identified by synchrotron single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells between 26 and 75 GPa. Recoverable to ambient conditions, compounds rhenium triboride (ReB3) and rhenium tetraboride (ReB4) consist of close-packed single layers of rhenium atoms alternating with boron networks built from puckered hexagonal layers, which link short bonded (similar to 1.7 angstrom) axially oriented B-2 dumbbells. The short and incompressible Re-B and B-B bonds oriented along the hexagonal c-axis contribute to low axial compressibility comparable with the linear compressibility of diamond. Sub-millimeter samples of ReB3 and ReB4 were synthesized in a large-volume press at pressures as low as 33 GPa and used for material characterization. Crystals of both compounds are metallic and hard (Vickers hardness, H-V = 34(3) GPa). Geometrical, crystal-chemical, and theoretical analysis considerations suggest that potential ReBx compounds with x > 4 can be based on the same principle of structural organization as in ReB3 and ReB4 and possess similar mechanical and electronic properties., Funding Agencies|Carnegie Institution of Washington; Promotion of Equal Opportunities for Women in Research and Teaching? - Free State of Bavaria; Deutsche Forschungsgemeinschaft [BY112/2-1]; National Science Foundation-Earth Sciences [EAR-1634415]; Department of Energy-GeoSciences [DE-FG02-94ER14466]; U.S. Department of Energy (DOE) Office of Science [DE-AC02-06CH11357]; European Research Council (ERC) [949626]; Knut and Alice Wallenberg (KAW) Foundation [KAW 2015.0043]; Swedish Research Council (VR) [2014-6336, 2019-05403, 2019-05600]; program Promotion of Equal Opportunities for Women in Research and Teaching - Free State of Bavaria; Swedish Government Strategic Research Areasin Materials Scienceon Functional Materials at Linkoeping University [2009 00971]; DOE - NNSAs Office of Experimental Sciences; Marie Sklodowska Curie Actions [INCA 600398]; Knut and Alice Wallenberg Foundation (Wallenberg Scholar Grant) [KAW-2018.0194]; Swedish Foundation for Strategic Research [FFL 15-0290]; European Research Council (ERC)

Chemical stability of the alkali halides NaCI and KCI has allowed for their use as inert media in high-pressure high-temperature experiments. Here we demonstrate the unexpected reactivity of the halides with metals (Y, Dy, and Re) and iron oxide (FeO) in a laser-heated diamond anvil cell, thus providing a synthetic route for halogen-containing binary and ternary compounds. So far unknown chlorides, Y2Cl and DyCl, and chloride carbides, Y2ClC and Dy2ClC, were synthesized at -40 GPa and 2000 K and their structures were solved and refined using in situ single-crystal synchrotron X-ray diffraction. Also, FeCl2 with the HP-PdF2-type structure, previously reported at 108 GPa, was synthesized at similar to 160 GPa and 2100 K. The results of our ab initio calculations fully support experimental findings and reveal the electronic structure and chemical bonding in these compounds., Funding Agencies|China Scholarship Council (CSC); Federal Ministry of Education and Research, Germany (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009 00971]; Deutsche Forschungsgemeinschaft [BY112/2-1]; UKRI Future Leaders Fellowship [MR/V025724/1]

The success of high-pressure research relies on the inventive design of pressure-generating instruments and materials used for their construction. In this study, the anvils of conical frustum or disk shapes with flat or modified culet profiles (toroidal or beveled) were prepared by milling an Ia-type diamond plate made of a (100)-oriented single crystal using the focused ion beam. Raman spectroscopy and synchrotron x-ray diffraction were applied to evaluate the efficiency of the anvils for pressure multiplication in different modes of operation: as single indenters forced against the primary anvil in diamond anvil cells (DACs) or as pairs of anvils forced together in double-stage DACs (dsDACs). All types of secondary anvils performed well up to about 250 GPa. The pressure multiplication factor of single indenters appeared to be insignificantly dependent on the shape of the anvils and their culets profiles. The enhanced pressure multiplication factor found for pairs of toroidally shaped secondary anvils makes this design very promising for ultrahigh-pressure experiments in dsDACs., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1, DU 393-13/2]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [200900971]

Tungsten tetraboride has been known so far as a non-stoichiometric compound with a variable composition (e.g. WB4-x, WB4+x). Its mechanical properties could exceed those of hard tungsten carbide, which is widely used nowadays in science and technology. The existence of stoichiometric WB4 has not been proven yet, and its structure and crystal chemistry remain debatable to date. Here we report the synthesis of single crystals of the stoichiometric WB4 phase under high-pressure high-temperature conditions. The crystal structure of WB4 was determined using synchrotron single-crystal X-ray diffraction. In situ high-pressure compressibility measurements show that the bulk modulus of WB4 is 238.6(2) GPa for B = 5.6(0). Measurements of mechanical properties of bulk polycrystalline sub-millimeter size samples under ambient conditions reveal a hardness of similar to 36 GPa, confirming that the material falls in the category of superhard materials., Funding Agencies|Carnegie Institution of Washington; program Promotion of Equal Opportunities for Women in Research and Teaching - Free State of Bavaria; Deutsche Forschungsgemeinschaft (DFG) [BY112/2-1]; National Science Foundation - Earth Sciences [EAR - 1634415]; DOE Office of Science [DE-AC02-06CH11357]

The high-pressure behavior of the borosilicate reedmergnerite NaBSi3O8 has been studied using in situ single-crystal X-ray diffraction and Raman spectroscopy up to 35 GPa. The crystal structure of NaBSi3O8 contracts homogeneously upon compression up to 12 GPa, while at higher pressures it undergoes two phase transitions. Above 16 GPa the unit-cell volume is doubled, whereas the coordination numbers of all cations and the structural topology are preserved. Above 25 GPa the crystal structure of NaBSi3O8 contains extremely rare dimers of edge-sharing BO4 tetrahedra and earlier unknown Si2O5 groups consisting of edge-sharing SiO5 square pyramids. The structural model was corroborated by DFT calculations. This HP modification results in the first example of a borosilicate compound with edge-sharing BO4 tetrahedra., Funding Agencies|Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [LA-4916/1-1]; Russian FederationRussian Federation [2831.2021.1.5]

Charged molecular species, such as [N-2](x-), [O-2](x-), [C-2](x-), and [S-2](x-), follow the paradigm of carrying integer values of electrons. Here, the Na-3(N-2)(4), Ca-3(N-2)(4), Sr-3(N-2)(4), and Ba(N-2)(3) compounds were produced and characterized <70 GPa and evidenced to be composed of paradigm-breaking [N-2](x-) dimers with noninteger charges of -0.75, -1.5, -1.5, and -0.67, respectively. The anion-driven metallicity of the compounds is proposed as the physical mechanism enabling the noninteger electron count of the [N-2](x-) dimers. The properties of these dimers and the compounds bearing them are demonstrated to depend on their noninteger charge, paving the way to materials with electron-tunable features., Funding Agencies|Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Federal Ministry of Education and Research, GermanyFederal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; DFGGerman Research Foundation (DFG)European Commission [DFG FOR2125, WI1232]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]; BIOVIA

The high-pressure behavior of simple molecular systems, devoid of strong intermolecular interactions, provides a unique avenue toward a fundamental understanding of matter. Tetrahalides of the carbon group elements (group 14), lacking all intermolecular interactions but van der Waals, are among the most elementary of molecular compounds. Here, we report the investigation of CF4 up to 46.5 GPa-the highest pressure up to which any tetrahalides of group 14 elements have been studied so far-by a combination of single-crystal x-ray diffraction (SC-XRDp), Raman spectroscopy, and ab initio calculations. These measurements reveal a pressure-induced reentrant phase transition (phase II phase III phase IIR) Room temperature and the formation of a previously unknown CF4 cubic polymorph, named phase IV, after the laser heating of CF4 at 46.5 GPa. In this work, the structures of phases II(R), III, and IV were solved and the atomic coordinates were refined on the basis of SC-XRDp. A comparison of tetrahalides of group 14 elements underlines that reducing the intermolecular halogen-halogen distances leads to a structural rearrangement from close packing of the tetrahedral molecules to close packing of the halogen atoms., Funding Agencies|Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [LA-4916/11]; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; DFGGerman Research Foundation (DFG)European Commission [DU 954-11/1, DU 3939/2, DU 393-13/1, DFG FOR2125, WI1232]; BIOVIA; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [SFO-Mat-LiU 2009 00971]

Magnetite, Fe3O4, is the oldest known magnetic mineral and archetypal mixed-valence oxide. Despite its recognized role in deep Earth processes, the behavior of magnetite at extreme high-pressure high-temperature (HPHT) conditions remains insufficiently studied. Here, we report on single-crystal synchrotron X-ray diffraction experiments up to similar to 80 GPa and 5000 K in diamond anvil cells, which reveal two previously unknown Fe3O4 polymorphs, gamma-Fe3O4 with the orthorhombic Yb3S4-type structure and delta-Fe3O4 with the modified Th3P4-type structure. The latter has never been predicted for iron compounds. The decomposition of Fe3O4 at HPHT conditions was found to result in the formation of exotic phases, Fe5O7 and Fe25O32, with complex structures. Crystal-chemical analysis of iron complex Crystal-chemical analysis oxides suggests the high-spin to low-spin crossover in octahedrally coordinated Fe3+ in the pressure interval between 43 and 51 GPa. Our experiments demonstrate that HPHT conditions promote the formation of ferric-rich Fe-O compounds, thus arguing for the possible involvement of magnetite in the deep oxygen cycle., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, FOR 2440, DU 393-13/1, DU 393-13/2]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [200900971]

At high pressures, autoionization - along with polymerization and metallization - is one of the responses of simple molecular systems to a rise in electron density. Nitrosonium nitrate (NO+NO3-), known for this property, has attracted a large interest in recent decades and was reported to be synthesized at high pressure and high temperature from a variety of nitrogen-oxygen precursors, such as N2O4, N2O and N-2-O-2 mixtures. However, its structure has not been determined unambiguously. Here, we present the first structure solution and refinement for nitrosonium nitrate on the basis of single-crystal X-ray diffraction at 7.0 and 37.0 GPa. The structure model (P2(1)/m space group) contains the triple-bonded NO+ cation and the NO3- sp(2)-trigonal planar anion. Remarkably, crystal-chemical considerations and accompanying density-functional-theory calculations show that the oxygen atom of the NO+ unit is positively charged - a rare occurrence when in the presence of a less-electronegative element., Funding Agencies|Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; DFGGerman Research Foundation (DFG)European Commission [DFG FOR2125, WI1232]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009 00971]

We report the high-pressure synthesis and the equation of state (EOS) of a novel nickel carbide (Ni3C). It was synthesized in a diamond anvil cell at 184(5) GPa through a direct reaction of a nickel powder with carbon from the diamond anvils upon heating at 3500 (200) K. Ni3C has the cementite-type structure (Pnma space group, a = 4.519(2) angstrom, b = 5.801(2) angstrom, c = 4.009(3) angstrom), which was solved and refined based on in-situ synchrotron single-crystal X-ray diffraction. The pressure-volume data of Ni3C was obtained on decompression at room temperature and fitted to the 3rd order Burch-Murnaghan equation of state with the following parameters: V-0 = 147.7(8) angstrom(3), K-0 = 157(10) GPa, and K-0 = 7.8(6). Our results contribute to the understanding of the phase composition and properties of Earths outer core., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

Based on the results from previous high-pressure experiments on the gadolinite-type mineral datolite, CaBSiO4(OH), the behavior of the isostructural borates beta-HfB2O5 and beta-ZrB2O5 have been studied by synchrotron-based in situ high-pressure single-crystal X-ray diffraction experiments. On compression to 120 GPa, both borate layer-structures are preserved. Additionally, at approximate to 114 GPa, the formation of a second phase can be observed in both compounds. The new high-pressure modification gamma-ZrB2O5 features a rearrangement of the corner-sharing BO4 tetrahedra, while still maintaining the four- and eight-membered rings. The new phase gamma-HfB2O5 contains ten-membered rings including the rare structural motif of edge-sharing BO4 tetrahedra with exceptionally short B-O and B...B distances. For both structures, unusually high coordination numbers are found for the transition metal cations, with ninefold coordinated Hf4+, and tenfold coordinated Zr4+, respectively. These findings remarkably show the potential of cold compression as a low-energy pathway to discover metastable structures that exhibit new coordinations and structural motifs., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

Carbonates containing CO4 groups as building blocks have recently been discovered. A new orthocarbonate, Sr2CO4 is synthesized at 92 GPa and at a temperature of 2500 K. Its crystal structure was determined by in situ synchrotron single-crystal X-ray diffraction, selecting a grain from a polycrystalline sample. Strontium orthocarbonate crystallizes in the orthorhombic crystal system (space group Pnma) with CO4, SrO9 and SrO11 polyhedra as the main building blocks. It is isostructural to Ca2CO4. DFT calculations reproduce the experimental findings very well and have, therefore, been used to predict the equation of state, Raman and IR spectra, and to assist in the discussion of bonding in this compound., Funding Agencies|Alexander von Humboldt-StiftungAlexander von Humboldt Foundation; Bundesministerium fur Bildung und ForschungFederal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche ForschungsgemeinschaftGerman Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1, FOR2125, WI1232]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009 00971]

Changes in the bonding of carbon under high pressure leads to unusual crystal chemistry and can dramatically alter the properties of transition metal carbides. In this work, the new orthorhombic polymorph of yttrium carbide, gamma-Y4C5, was synthesized from yttrium and paraffin oil in a laser-heated diamond anvil cell at similar to 50 GPa. The structure of gamma-Y4C5 was solved and refined using in situ synchrotron single-crystal x-ray diffraction. It includes two carbon groups: [C-2] dimers and nonlinear [C-3] trimers. Crystal chemical analysis and density functional theory calculations revealed unusually high noninteger charges ([C-2](5.2-) and [C-3](6.8-)) and unique bond orders (<1.5). Our results extend the list of possible carbon states at extreme conditions., Funding Agencies|Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

Yttrium nitride, Y5N14, was synthesized by direct reaction between yttrium and nitrogen at similar to 50 GPa and similar to 2000 K in a laser-heated diamond anvil cell. High-pressure single-crystal X-ray diffraction revealed that the crystal structure of Y5N14 (space group P4/mbm) contains three distinct types of nitrogen dimers. Crystal chemical analysis and ab initio calculations demonstrated that the dimers [N-2](x-) are crystallographically and chemically nonequivalent and possess distinct noninteger formal charges (x) that make Y5N14 unique among known compounds. Theoretical computations showed that Y5N14 has an anion-driven metallicity, with the filled part of its conduction band formed by nitrogen p-states. The compressibility of Y5N14, determined on decompression down to similar to 10 GPa, was found to be uncommonly high for dinitrides containing +3 cations (the bulk modulus K-0 = 137(6) GPa)., Funding Agencies|Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1, STE1105-13/2]; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009 00971]

Here, we present a method to study the equation of state of opaque amorphous and crystalline materials in diamond anvil cells. The approach is based on measurements of sample dimensions using high-resolution optical microscopy. Data on the volumetric strain as a function of pressure allow deriving the isothermal equation of state of the studied material. The analysis of optical images is fully automatized and allows measuring the sample dimensions with the precision of about 60 nm. The methodology was validated by studying isothermal compression of omega-Ti up to 30 GPa in a Ne pressure transmitting medium. Within the accuracy of the measurements, the bulk modulus of omega-Ti determined using optical microscopy was similar to that obtained from x-ray diffraction. For glassy carbon compressed to similar to 30 GPa, the previously unknown bulk modulus was found to be equal to K-0 = 28 (2) GPa [K = 5.5(5)]. Published under an exclusive license by AIP Publishing., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009 00971]

Extreme pressures and temperatures are known to drastically affect the chemistry of iron oxides, resulting in numerous compounds forming homologous series nFeOmFe(2)O(3) and the appearance of FeO2. Here, based on the results of in situ single-crystal x-ray diffraction, Mossbauer spectroscopy, x-ray absorption spectroscopy, and density-functional theory + dynamical mean-field theory calculations, we demonstrate that iron in high-pressure cubic FeO2 and isostructural FeO2H0.5 is ferric (Fe3+), and oxygen has a formal valence less than 2. Reduction of oxygen valence from 2, common for oxides, down to 1.5 can be explained by a formation of a localized hole at oxygen sites., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFOMat-LiU) [2009 00971]; Russian Science FoundationRussian Science Foundation (RSF) [18-12-00492]; Ministry of Science and Higher Education of the Russian Federation of the NUST "MISIS" [K2-2019-001, 211]; Knut and Alice Wallenberg Foundation (Wallenberg Scholar Grant) [KAW-2018.0194]; Swedish Government Strategic Research Areas; SeRCAgency for Science Technology & Research (ASTAR); Swedish Research Council (VR)Swedish Research Council [2019-05600]

High-pressure chemistry is known to inspire the creation of unexpected new classes of compounds with exceptional properties. Here, we employ the laser-heated diamond anvil cell technique for synthesis of a Dirac material BeN4. A triclinic phase of beryllium tetranitride tr-BeN4 was synthesized from elements at similar to 85 GPa. Upon decompression to ambient conditions, it transforms into a compound with atomic-thick BeN4 layers interconnected via weak van der Waals bonds and consisting of polyacetylene-like nitrogen chains with conjugated pi systems and Be atoms in square-planar coordination. Theoretical calculations for a single BeN4 layer show that its electronic lattice is described by a slightly distorted honeycomb structure reminiscent of the graphene lattice and the presence of Dirac points in the electronic band structure at the Fermi level. The BeN4 layer, i.e., beryllonitrene, represents a qualitatively new class of 2D materials that can be built of a metal atom and polymeric nitrogen chains and host anisotropic Dirac fermions., Funding Agencies|Army Research Office; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Russian Science FoundationRussian Science Foundation (RSF) [18-12-00492]; Ministry of Science and Higher Education of the Russian Federation of Increase Competitiveness Program of NUST MISIS [K2-2020-026, 211]; Knut and Alice Wallenberg Foundation (Wallenberg Scholar Grant) [KAW-2018.0194]; Swedish Government Strategic Research Areas in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]; SeRCAgency for Science Technology & Research (ASTAR); Swedish Research Council (VR)Swedish Research Council [2019-05600]; Vinnova VINN Excellence Center Functional Nanoscale Materials (FunMat-2) [2016-05156]; Swedish Research CouncilSwedish Research CouncilEuropean Commission [2016-07213]; JTC-FLAGERA Project GRANSPORT; National Science Foundation-Earth SciencesNational Science Foundation (NSF) [EAR-1634415]; Department of Energy-GeosciencesUnited States Department of Energy (DOE) [DE-FG0294ER14466]; DOENNSAs Office of Experimental Sciences; DOE Office of ScienceUnited States Department of Energy (DOE) [DE-AC02-06CH11357]; [W911NF-19-2-0172]

High-pressure nitrogen chemistry has expanded at a formidable rate over the past decade, unveiling the chemical richness of nitrogen. Here, the Zn-N system is investigated in laser-heated diamond anvil cells by synchrotron powder and single-crystal X-ray diffraction, revealing three hitherto unobserved nitrogen compounds: beta-Zn3N2, alpha-ZnN4, and beta-ZnN4, formed at 35.0, 63.5, and 81.7 GPa, respectively. Whereas beta-Zn3N2 contains the N3- nitride, both ZnN4 solids are found to be composed of polyacetylene-like [N-4](infinity)(2-) chains. Upon the decompression of beta-ZnN4 below 72.7 GPa, a first-order displacive phase transition is observed from beta-ZnN4 to alpha-ZnN4. The alpha-ZnN4 phase is detected down to 11.0 GPa, at lower pressures decomposing into the known alpha-Zn3N2 (space group Ia (3) over bar) and N-2. The equations of states of beta-ZnN4 and alpha-ZnN4 are also determined, and their bulk moduli are found to be K-0 = 126(9) GPa and K-0 = 76(12) GPa, respectively. Density functional theory calculations were also performed and provide further insight into the Zn-N system. Moreover, comparing the Mg-N and Zn-N systems underlines the importance of minute chemical differences between metal cations in the resulting synthesized phases., Funding Agencies|Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1, LA-4916/1-1]; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009 00971]

It is widely accepted that the lower mantle consists of mainly three major minerals-ferropericlase, bridgmanite and calcium silicate perovskite. Ferropericlase ((Mg,Fe)O) is the second most abundant of the three, comprising approximately 16-20 wt% of the lower mantle. The stability of ferropericlase at conditions of the lowermost mantle has been highly investigated, with controversial results. Amongst other reasons, the experimental conditions during laser heating (such as duration and achieved temperature) have been suggested as a possible explanation for the discrepancy. In this study, we investigate the effect of pulsed laser heating on the stability of ferropericlase, with a geochemically relevant composition of Mg0.76Fe0.24O (Fp24) at pressure conditions corresponding to the upper part of the lower mantle and at a wide temperature range. We report on the decomposition of Fp24 with the formation of a high-pressure (Mg,Fe)(3)O(4)phase with CaTi2O4-type structure, as well as the dissociation of Fp24 into Fe-rich and Mg-rich phases induced by pulsed laser heating. Our results provide further arguments that the chemical composition of the lower mantle is more complex than initially thought, and that the compositional inhomogeneity is not only a characteristic of the lowermost part, but includes depths as shallow as below the transition zone., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [5K16WC1, 05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University faculty grant SFO-Mat-LiU [2009 00971]

Laser heating of rhenium in a diamond anvil cell to 3000 +/- 300 K at about 200 GPa results in formation of two previously unknown rhenium carbides, hexagonal WC-type structured ReC and orthorhombic TiSi2-type structured ReC2. The shortest C-C distances [1.758(3) angstrom at 219(5) GPa and 1.850(4) angstrom at 180(7) GPa] found in honeycomb-like carbon nets in the structure of ReC2 are quite unusual. The Re-C solid solution formed at multimegabar pressure has the carbon content of approximate to 20 at%., Funding Agencies|Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [5K16WC1, 05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

The atomic and electronic structures of Cu2H and CuH have been investigated by high-pressure nuclear magnetic resonance spectroscopy up to 96 GPa, X-ray diffraction up to 160 GPa, and density functional theory-based calculations. Metallic Cu2H was synthesized at a pressure of 40 GPa, and semimetallic CuH at 90 GPa, found stable up to 160 GPa. For Cu2H, experiments and computations show an anomalous increase in the electronic density of state at the Fermi level for the hydrogen 1s states and the formation of a hydrogen network in the pressure range 43-58 GPa, together with high H-1 mobility of similar to 10(-7) cm(2)/s. A comparison of these observations with results on FeH suggests that they could be common features in metal hydrides., Funding Agencies|German Research Foundation (Deutsche Forschungsgemeinschaft, DFG)German Research Foundation (DFG) [DU 954/11-1, DU 393/13-1, DU 393/9-2, ME 5206/3-1, STE 1105/13-1, FOR 2440]; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

The sulfur-hydrogen system is the first one in which superconductivity at temperatures over 200 K has been reported, albeit at high pressure. The particular phases causing the measured T-c and their structures are not yet firmly identified. Here, synchrotron single-crystal x-ray diffraction studies of S-H samples were performed up to 150 GPa and revealed two previously unobserved and unpredicted sulfur-hydrogen phases-H6 +/- xS5 with x similar to 0.4, and H2.85 +/- yS2 with y similar to 0.35. The crystallographic data obtained in this work, both for the new phases and for the previously identified H3S polymorphs, provide an unambiguous experimental proof of the chemical richness of the S-H system and the structural diversity of compounds forming at high pressures and high temperatures. Our results have profound implications for the interpretation of the resistance, superconductivity, and other physical properties measurements on the complex S-H system., Funding Agencies|Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; DFGGerman Research Foundation (DFG) [DFG FOR2125, WI1232]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009 00971]

Studies of polynitrogen phases are of great interest for fundamental science and for the design of novel high energy density materials. Laser heating of pure nitrogen at 140 GPa in a diamond anvil cell led to the synthesis of a polymeric nitrogen allotrope with the black phosphorus structure, bp-N. The structure was identified in situ using synchrotron single-crystal x-ray diffraction and further studied by Raman spectroscopy and density functional theory calculations. The discovery of bp-N brings nitrogen in line with heavier pnictogen elements, resolves incongruities regarding polymeric nitrogen phases and provides insights into polynitrogen arrangements at extreme densities., Funding Agencies|Alexander von Humboldt FoundationAlexander von Humboldt Foundation; Federal Ministry of Education and Research, Germany (BMBF)Federal Ministry of Education & Research (BMBF) [5K16WC1, 05K19WC1]; Deutsche Forschungsgemeinschaft (DFG)German Research Foundation (DFG) [DU 954-11/1, DU 393-9/2, DU 393-13/1]; DFGGerman Research Foundation (DFG) [DFG FOR2125, WI1232]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]