Search

At present, the energy consumption of the pumping unit represents the highest cost in operating a pumping system. Due to this reason, this paper proposes a reliable and robust solution for integrating a wind energy conversion system (WECS) into an already existing pumping system (PS), without being overly intrusive for the PS, and without altering the control strategy or the hardware of the commercial WECS. The current work begins by presenting the modeling undertaken, which includes a WECS with pitchable blades, a doubly-fed induction generator (DFIG) together with its power converter, a centrifugal pump, an induction motor (IM) with its power converter, and an irrigation network with a pressure transducer. The second part consists of the proposed three-level controller: a general controller that regulates the WECS power demand according to the pumping pressure reference; three second-level controllers; two necessary for the WECS and one for the PS; and three first level controllers, two for controlling the power converters of the WECS generator and one for controlling the pump motor power converter. Finally, the simulation results of the proposed system control strategy are presented, showing its technical feasibility and good performance.

Currently, the most implemented solution for driving a pumping system (PS) at variable speed is using a variable frequency drive (VFD). Because most of the VFDs have integrated only one proportional-integral (PI) frequency controller whose parameters (proportional gain/the integration time) can be off-line tuned but cannot be changed during real-time operation, and many PS must operate in different regimes (at variable speed, variable flow rate, at variable pumping head or even at variable power, e.g., those powered by renewable energy sources), the adaptive control strategy proposed in this paper overcomes these problems with very good performances. The proposed adaptive control strategy uses only simple PI controllers for managing several operating regimes. The adaptive character is not ensured by re-tuning the PI controller parameters as in self-tuning controllers but by readjusting the control law through a change in the control loop depending on the controlled output of the process (pump speed, pump discharge, pumping head or absorbed power). The deviations of the mentioned controlled outputs from their referenced values are converted into electrical frequency error (the deviation of the current value from its reference), which is the regular input to the already tuned controller; therefore, no controller re-tuning is required.

In recent years, many pumping systems have begun to be powered by renewable energy generators, including mostly photovoltaic generators and, less frequently, electrical wind generators. Because of the technology’s complexity and novelty (it has not yet reached its maturation), most of those systems consist of single pumps powered by photovoltaic generators or electrical wind generators. For this reason, the current paper proposes a strategy for driving a multi-pump system with water storage powered by a fluctuating and intermittent power source, such as power grids, which are limited by price variation over different periods during the day, or photovoltaic generators and/or electrical wind generators. The current work begins by proposing a model of a multi-pump system with water storage, followed by the design of a control strategy for operating such a system powered by a fluctuating and intermittent power source in an energy-efficient manner, without sacrificing the reliability, robustness and lifetime of the plant. Finally, an analysis of two concrete situations encountered in practice is made: in one, the considered multi-pump system is powered only by a power grid limited by price variation over three periods; in the other, it is powered by a photovoltaic generator.