Search

This study aimed to summarize the evidence regarding the effects of dietary intake before conception on pregnancy outcomes by performing a systematic review and meta-analysis of prospective studies. Electronic databases were searched from inception up to August 2021. Overall, 65 studies involving 831 798 participants were included and 38 studies were quantitatively pooled. With regard to maternal outcomes, pre-pregnancy intake of fried food, fast food, red and processed meat, heme iron and a low-carbohydrate dietary pattern was positively associated with the risk of gestational diabetes mellitus (GDM) (all P 0.05). However, a high dietary fiber intake and folic acid supplementation were negatively associated with GDM risk (both P 0.05). With regard to neonatal outcomes, maternal caffeine intake before pregnancy significantly increased the risk of spontaneous abortion, while folic acid supplementation had protective effects on total adverse neonatal outcomes, preterm birth, and small-for-gestational age (SGA, all P 0.05). However, no significant associations were found between adverse pregnancy outcomes (i.e., GDM and SGA) and the pre-pregnancy dietary intake of sugar-sweetened beverages, potato, fish, and carbohydrates and the Healthy Eating Index. Our study suggests that maintaining a healthy diet before conception has significant beneficial effects on pregnancy outcomes.Supplemental data for this article is available online at https://doi.org/10.1080/10408398.2021.1989658.

Objective: This study aimed to investigate the associations between dietary one-carbon metabolism-related nutrients (betaine, choline, methionine, folate, vitamin B6, and vitamin B12) and fluorosis among the Chinese population in an area known for coal-burning fluorosis.Methods: A cross-sectional study was conducted, with 653 fluorosis patients and 241 non-fluorosis participants. Dietary intake was acquired using a validated semi-quantitative 75-item food frequency questionnaire. The risk associations were assessed by unconditional logistical regression.Results: We observed a significant inverse association between dietary betaine, total choline, methionine, folate, vitamin B6, and choline species and fluorosis. The adjusted OR (95% CI) in the highest quartile of consumption compared with the lowest were 0.59 (0.37–0.94) (P-trend = 0.010) for betaine intake, 0.45 (0.28–0.73) (P-trend = 0.001) for total choline intake, 0.45 (0.28–0.72) (P-trend < 0.001) for methionine intake, 0.39 (0.24–0.63) (P-trend < 0.001) for folate intake, 0.38 (0.24–0.62) (P-trend < 0.001) for vitamin B6 intake, and 0.46 (0.28–0.75) (P-trend = 0.001) for total choline plus betaine intake. Dietary intakes of choline-containing compounds, phosphatidylcholine, free choline, glycerophosphocholine, and phosphocholine were also inversely associated with lower fluorosis (all P-trend < 0.05). No significant associations were observed between dietary vitamin B12 or sphingomyelin and fluorosis.Conclusion: The present study suggested that the higher dietary intakes of specific one-carbon metabolism-related nutrients, such as betaine, choline, methionine, folate, and vitamin B6, are associated with lower fluorosis prevalence.

Two-dimensional (2D) molybdenum diselenide (MoSe2) as one of the ultrathin transition metal dichalcogenides (TMDs) has attracted considerable attention because of its potential applications in thermoelectric and nano-electronic devices. Here, the thermal conductivity of monolayer MoSe2 and its responses to simulated size and defects are studied by nonequilibrium molecular dynamics simulations. With the increase of sample length, the thermal conductivity of monolayer MoSe2 nanoribbons exhibits an enhancement whereas it is insensitive to the width. At room temperature, the thermal conductivities of monolayer MoSe2 along armchair and zigzag directions are 17.758 and 18.932 W (m K)−1, respectively, which are consistent with previous results. The impact of defects on thermal conductivity has also been studied by varying the concentration of the vacancy from 0.1% to 0.5%. The results show that an increase of the defect concentration will greatly suppress the thermal conductivity. The 0.5% defect concentration with a Mo vacancy can result in a thermal conductivity reduction of ∼43%. Such a study would provide a good insight into the tunable thermal transport for potential applications of not only monolayer MoSe2, but also many other TMDs.

In this article, the design, simulation, fabrication and measurement of an ultrathin and wide band radar metamaterial absorber (MMA) are introduced. The unit of the MMA consists of two different si...

Two-dimensional (2D) molybdenum diselenide (MoSe2) as one of the ultrathin transition metal dichalcogenides (TMDs) has attracted considerable attention because of its potential applications in thermoelectric and nano-electronic devices. Here, the thermal conductivity of monolayer MoSe2 and its responses to simulated size and defects are studied by nonequilibrium molecular dynamics simulations. With the increase of sample length, the thermal conductivity of monolayer MoSe2 nanoribbons exhibits an enhancement whereas it is insensitive to the width. At room temperature, the thermal conductivities of monolayer MoSe2 along armchair and zigzag directions are 17.758 and 18.932 W (m K)-1, respectively, which are consistent with previous results. The impact of defects on thermal conductivity has also been studied by varying the concentration of the vacancy from 0.1% to 0.5%. The results show that an increase of the defect concentration will greatly suppress the thermal conductivity. The 0.5% defect concentration with a Mo vacancy can result in a thermal conductivity reduction of ∼43%. Such a study would provide a good insight into the tunable thermal transport for potential applications of not only monolayer MoSe2, but also many other TMDs.

In this paper, we reported on the preparation of porous materials via a reaction under Autogenic Pressure at Elevated Temperature (RAPET) at 700°Cusing natural product and alkoxides as precursors. The RAPET is a new simple efficient method to prepare inorganic materials. The porous carbon and its composite materials were prepared via the method of RAPET using natural products such as sweet potato, coriander, the absorbent cotton and viscose fiber doped by tetrabutyl titanate (TBOT) and tetraethoxysilane (TEOS). The reaction temperature of RAPET was 700°C. The carbon and its composites were studied with scanning electron microscopy (SEM), X-ray diffraction (XRD) and nitrogen adsorption-desorption measurements. The BET surface area of the materials are different from 4m2/g to 405m2/g. The XRD investigation indicates that the phases of the TiO2 in the carbon/TiO2 composites are anatase. The materials show a certain charge-discharge performance.

The coral-like Co3O4 nanowires (CNWs) cluster was synthesized by a novel strategy, in which polyurethane (PU) prepolymer was used as soft template during solvothermal process. The diameters of CNWs samples gradually decreased with the increasing of PU prepolymer. Electrochemical measurements showed that the CNWs possessed the largest specific capacitance of 502.6 F g−1, which is 2.2 times higher than that of bulk Co3O4. Moreover, an all-solid-state asymmetric supercapacitor based on CNWs as positive electrode and activated carbon as negative electrode delivered a high energy density of 18.3 Wh kg−1 and good cycling stability.

GTD222 superalloy is a potential candidate for large-scale complex thin-walled castings with high temperature resistance in the next-generation aircraft engines, due to its excellent creep performance, good oxidation resistance and favorable weldability. The precision casting of GTD222 with a complex thin-wall structure was investigated in this work. The good quality of the final cast indicated that the optimized gating system obtained by numerical simulation was satisfying.

A novel method to remove impurity silicon from aluminum melt by the addition of K2TiF6 was studied. The mechanism for silicon removal is the formation and sedimentation of Ti(Al1-x,Six)3 phase and the removal efficiency is mostly decided by the solubility of silicon in TiAl3 phase, which increases with the increasing of the initial silicon concentration in aluminum melt. The effect of holding temperature on the impurity Si purification efficiency was investigated and the result indicated that the effect of holding temperature is very finite.

Volatile organic compounds (VOCs) in the urban drinking water distribution systems for two coastal cities (S City and L City) in China were analyzed. Health risk assessments of VOCs detected in tap water were performed, and the distribution characteristics of VOCs in the tap water pipe network were also investigated. Among 47 target VOCs, 16 compounds were detected, of which 11 were detected in both S City and L City. Halogenated hydrocarbons were the most commonly detected VOCs, with trihalomethanes (including bromodichloromethane, dibromochloromethane, and bromoform) having the highest detection frequencies (92%-100%). With the exception of bromodichloromethane and dibromochloromethane, the maximum concentrations of detected VOCs in both cities complied with the relevant limits regulated by the standards for drinking water quality (GB 5749-2006). For bromodichloromethane and dibromochloromethane, not only did their concentrations exceed the standard limits of GB 5749-2006 (60 μg·L

Four new acylated triterpene glycosides with aliphatic chains (4-7) as well as five known triterpenoids were isolated from the flower buds of Staphylea bumalda with bioassay guidance. Their structures were determined on the basis of spectral techniques, including IR, 1D and 2D NMR, and HR-APCI-MS. Most compounds (except 8) were isolated from S. bumalda for the first time. Additionally, the neuroprotective effects of 1 and 4-9 on suckling rat primary cultured hippocampal neurons against H

This paper presents a compact triple-band bandpass filter based on metamaterials. The miniaturization is realized by the principle of phase compensation of metamaterial. Compared with the conventional half-wavelength filter, the metamaterial filter has a small size of 10 mm×10 mm. The triple-band bandpass filter performance has been validated by the electromagnetic simulation software of high frequency structure simulator (HFSS). The results illustrate that the filter is designed with center frequencies of 2.4 GHz, 5.1 GHz and 8.8 GHz, bandwidths of about 7.9% (2.31—2.50 GHz), 7.8% (5.0—5.4 GHz) and 7.4% (8.50—9.15 GHz), respectively, and it shows good band pass characteristics.

Calculation and discussion have been carried about relation between compression of bored piles shaft and settlement of pile top, and valuation of ξ as composition coefficient adopted in standard method and distribution pattern of compression settlement characteristic by static load test on overlength bored piles in loess area as well as test and analysis on load-settlement characteristic of pile top together with strain test data on piles shaft.

In this paper, the relationship between the shrinkage of the thin-walled wax part in the investment casting process (ICP) and the process parameters including mold temperature, melt temperature, packing pressure and holding time are investigated through a series of experiments. The relationship is successfully described by a mathematical regression model which is based on the response surface methodology (RSM). The rationality and adequacy of the mathematical model are checked via analysis of variation (ANOVA) and a sensitivity analysis for process parameters on the dimensional shrinkage variation are conducted which shows that the contribution percentages of mold temperature, melt temperature, packing pressure and holding time are 23.77%, 43.67%, 11.85% and 16.99%, respectively. Additionally, the optimal setting of the process parameters is also obtained by calculating the desirability function. The optimal combination of the mold temperature, melt temperature, packing pressure, and holding time is 74°C, 30°C 25bar, and 5 sec, respectively.

Tower crane hoisting system is the most important structural component of tower crane components. Its structural performance directly affects the performance of the overall tower crane. Combining the characteristics of The unconventional dedicate tower crane, established the mathematical model of hoisting system, and complied the particle swarm optimization algorithm program based on improved particle swarm optimization algorithm by MATLAB language, optimized analysis of hoisting system of The unconventional dedicate tower crane, and verified the optimization results by static analysis in the end. The result shows that the optimized analysis of tower crane hoisting system is viable and efficient by the improved particle swarm optimization algorithm.

The dynamic performance of PingQiao of abnormal high tower crane is particularly important to the whole structure. Using the finite element method to set up the finite element parametric model of PingQiao of the abnormal high tower crane, and then making dynamic analysis. Taking the analysis result as the objective function of the optimization design model,and using the optimization algorithm module of ANSYS to make dynamic optimization design of PingQiao structure,the quality of PingQiao of the abnormal high tower crane is effectively reduced, the dynamic performance of the metal structure is improved,this lays the foundation for the whole optimization.

As investment castings grow in size and complexity, control of wax pattern dimensions becomes increasingly important and difficult. Conventionally, mold design and dimensions are re-worked by trial-and-error procedures until casting dimensions are produced within acceptable dimensional tolerances, increasing the cost of the castings.Nowadays, numerical simulation is an efficient tool for mold design. However, one of the critical difficulties in using computer models for the simulation of wax injection process is the lack of material properties of the wax. Material property measurements were conducted in this study that can be used as input in Moldflow. Then, 3D numerical simulation could be applied in analysis with mold design of thin-walled wax pattern, with high dependability. Simulation results of filling time and the location of the air traps were analyzed. Consequently, best gate location and reasonable gate system were determined. The paper highlighted the effectiveness of simulation in filling optimization and deformation of wax pattern.

The damage mechanism of loessial soils was studied by the statistical theory.Based on the characteristics strength of loessial soils micro-unit with Weibull distribution, and parameters that described by distribution variable of Drucker-Prager creterion are used, loessial soils damage constitutive model considering damage threshold is established to reflect the full process of loessial soils failure. Conventional triaxial consolidation undrained shear test results of loessial soils are taken as example to verify the model. By comparing theoretical calculation results with test results, it is showed that the statistical damage constitutive model considering damage threshold is reasonable.

For the high hoisting height, wide using range, tower crane is widely utilized in the architecture construction, while there are some deficiencies in the high rising architecture such as chimney, so the performance can’t exerted. By virtue of computer aided technology, the finite element static analysis of metallic structure of unconventional dedicated tower crane is conducted in this paper, and the figures of stress and displacement are achieved for the two working conditions and two structures. It is proved that the results are satisfied the requirements of stiffness and strength, and also foundation is established for the further analysis.

The accuracy of the wax patterns used in the investment casting process has a direct bearing on the accuracy of the final cast part. Wax injection process plays a key role in production of nearly net shape wax pattern. Dimension shrinkage is one of the most significant problems of a wax pattern in terms of dimensional stability in the wax injection molding. This study aimed to determine the effects of injection parameters on the dimensional accuracy of the wax patterns. Linear contractions normal to flow direction and weight of wax patterns were measured and dimensional variations were evaluated. The results highlight it is important that when dealing with thick gates, short packing time appears to be the best way to avoid gate area over packing and dimensional variations, high packing pressure appears to increase expansion and dimensional variation of wax pattern.

Conducting polyaniline (PANI) nanofibers were synthesized by interfacial polymerization with ethanol/water, n-butyl alcohol/water and n-hexyl alcohol/water as reaction media, respectively. It was characterized by four-probe method, FTIR, UV-Vis, XRD, SEM techniques etc. The results showed that the n-butyl alcohol/water system provided a better reaction environment for the preparation of PANI nanofibers. The optimal conductivity value of PANI nanofibers was 3.55 S/cm; the diameter was between 60 and 100nm and the length was from 600nm to several microns. The electromagnetic shielding effectiveness of the PANI nanofibers was from 38dB to 79dB, which was measured by coaxial method from 10KHz to 4GHz. According to the results, the PANI nanofibers could be used as electromagnetic shielding materials.

A kind of radar absorber is designed and produced based on circular microstructure, which is composed of a circular microstructure, carbonyl iron rubber radar absorbing patch and metal backboard composition. Numerical simulation of effect of the circular microstructure on absorbing properties of carbonyl iron rubber radar absorbing patch is performed by means of the time domain finite integral method. Simulated results indicate that by using the holding absorber with the unchanged thickness of 2.5 mm, when the absorber unit size was P = 30 mm and the circular radius was R = 5 mm, the value of the minimum absorption peak can reach −43 dB, −10 dB absorption band shifted from 5.8–9.3 to 4.6–8.2 GHz, changing the parameters of circular microstructure greatly, expanding the absorbing bandwidth of microwave absorbing patch, reducing the reflectivity of resonance frequency. According to the simulation results, the samples are prepared and tested. The test results are in agreement with the simulation results.

In this paper Polyglycol (PG) was used as ‘soft’ template to induce the polymerization of aniline in aqueous ethanol and hence control both the nucleation and growth of polyaniline (PANI) nanofibers. The products were characterized by Transmission electro microscope (TEM) and X-ray diffraction (XRD) techniques. TEM photos showed that the diameter of PANI nanofibers synthesized in pure water is 100nm while that of PANI nanofibers synthesized in aqueous ethanol is 50nm. It revealed that the volume fraction of ethanol showed really important effect on the morphological parameters of the PANI nanofibers. The X-ray diffraction patterns of the PANI nanofibers showed high crystallinity. Moreover, the resulting PANI nanofibers exhibited an unusual electromagnetic loss at the microwave frequency (f = 8.2~12.4 GHz) . Compared with 1.79, the highest electrical loss, tanδe, of the microparticles PANI at 8.47 GHz and 0.72, the highest magnetic loss, tanδm at 10.93 GHz, it was noted that the highest electrical loss, tanδe, of PANI nanofibers reached 3.26 at 10.4 GHz, and the highest magnetic loss, tanδm, was 2.85 at 9.35 GHz. It might arise from order arrangement of polaron as charge carrier caused by nanofibers morphology and can be used for the potential application as microwave absorbing materials.

A new method to assess phosphorus bioavailability in the sediments and soils was developed by using a homemade iron oxide/ cellulose acetate membrane(FeO/CAM). The results show that the amount of bioavailable phosphorus(FeO-P) desorbed from the sediment and soil increased with the shaking time,and FeO-P desorption would come to equilibrium after 16 ot 20h. With the increase of the ratio between soil mass and water volume, the quantity of the desorbed FeO-P would decrease and then went planar after 20 to 30g/L. The quantity of the desorbed FeO-P had no significant difference between the FeO/CAMs of 20 to 30cm2. The dynamics of FeO-P desorption from the sediments and soils would be accelerated by appropriately increasing the shaking frequency. In short, FeO/ CAMs overcome many disadvantages of iron oxide impregnated filter paper and are easy to be commercialized; therefore it may have a better future in the application to assessing phosphorus hioavailability in the sediments and soils.