Search

Transparent flexible electrodes based on silver nanowires (AgNWs) have great potential for practical applications and many studies have been carried out to improve their conductivity, transparency, and surface roughness. In this study, we demonstrate a new approach for the fabrication of high-performance transparent flexible electrodes based on AgNWs and graphene oxide (GO) on polymer substrates using the pressing method. The surface morphology of the pressed AgNW/GO electrode was characterised by atomic force microscopy (AFM) and observed by scanning electron microscope (SEM). The electrode had a low surface roughness with the root mean square (Rq) of 7 nm. The electrode exhibits a low sheet resistance of 22 Ω/sq, a high transmittance of ~88%, resulted in a figures-of-merit (FoM) value of ~12.6. The optical and electrical properties of the electrode are comparable to that of the flexible ITO electrode. In addition, the electrodes also displayed outstanding durability and mechanical stability. This simple and scalable fabrication method is expected to contribute to future studies on flexible transparent conductive electrodes.

Abstract Metal–halide perovskite nanocrystals (NCs) have emerged as suitable light‐emitting materials for light‐emitting diodes (LEDs) and other practical applications. However, LEDs with perovskite NCs undergo environment‐induced and ion‐migration‐induced structural degradation during operation; therefore, novel NC design concepts, such as hermetic sealing of the perovskite NCs, are required. Thus far, viable synthetic conditions to form a robust and hermetic semiconducting shell on perovskite NCs have been rarely reported for LED applications because of the difficulties in the delicate engineering of encapsulation techniques. Herein, a highly bright and durable deep‐blue perovskite LED (PeLED) formed by hermetically sealing perovskite NCs with epitaxial ZnS shells is reported. This shell protects the perovskite NCs from the environment, facilitates charge injection/transport, and effectively suppresses interparticle ion migration during the LED operation, resulting in exceptional brightness (2916 cd m−2) at 451 nm and a high external quantum efficiency of 1.32%. Furthermore, even in the unencapsulated state, the LED shows a long operational lifetime (T50) of 1192 s (≈20 min) in the air. These results demonstrate that the epitaxial and hermetic encapsulation of perovskite NCs is a powerful strategy for fabricating high‐performance deep‐blue‐emitting PeLEDs.

Abstract The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies, which are key factors in optoelectronic devices, must be accurately estimated for newly designed materials. Here, we developed a deep learning (DL) model that was trained with an experimental database containing the HOMO and LUMO energies of 3026 organic molecules in solvents or solids and was capable of predicting the HOMO and LUMO energies of molecules with the mean absolute errors of 0.058 eV. Additionally, we demonstrated that our DL model was efficiently used to virtually screen optimal host and emitter molecules for organic light-emitting diodes (OLEDs). Deep-blue fluorescent OLEDs, which were fabricated with emitter and host molecules selected via DL prediction, exhibited narrow emission (bandwidth = 36 nm) at 412 nm and an external quantum efficiency of 6.58%. Our DL-assisted virtual screening method can be further applied to the development of component materials in optoelectronics.

Abstract Organic light‐emitting diodes (OLEDs) have garnered increasing attention as a promising candidate for application in next‐generation displays and solid‐state lighting devices. The doping technique commonly used to fabricate light‐emitting layers (EMLs) of OLEDs disperses the emitting material in a host matrix to mitigate aggregation‐induced quenching (ACQ). Alternatively, owing to their high efficiency and ease of manufacture, nondoped OLEDs have been developed as a substitute for doped OLEDs. When fabricating nondoped OLEDs, it is essential to suppress the ACQ effect in the EML and efficiently utilize the generated excitons for radiative decay. Since the discovery of aggregation‐induced emission (AIE) by Tang et al., significant work has been done to improve the stability and efficiency of nondoped OLEDs based on fluorescent AIE luminogens (AIEgens). Fluorescent AIEgens, synthesized using various molecular frameworks, such as silole, tetra/triphenylethylene, tetraphenylpyrazine, and tetraphenylbenzene, exhibit high photoluminescence quantum yields in the solid state. Therefore, many studies have reported that fluorescent AIEgen‐based OLEDs have excellent external quantum efficiency and exhibit emission at various wavelengths, including deep‐blue/blue/green emission. With the development of fluorescent AIEgens, delayed fluorescent AIEgens with efficient triplet utilization through reverse intersystem crossing and AIE properties have been adopted as ideal emitters and used in nondoped OLEDs. This review systematically discusses and summarizes recent reports on the development of AIEgens for nondoped OLEDs by grouping them into fluorescent and delayed fluorescent AIEgens. The purpose of this review is to provide deep insights into the design of novel AIEgens for high‐performance nondoped OLEDs.

Time-resolved circular dichroism spectra can reveal changes in chirality on ultrashort time scales, but achieving sub-picosecond time resolution is still a challenge. Here the authors demonstrate 100-femtosecond time-resolved CD mapping of polyfluorene copolymer thin films, revealing a supramolecular origin of their chiroptical response.

The photophysical properties of donor (D)-acceptor (A) polymers were studied by designing two types of polymers, (D-σ-A)n and (D-π-A)n, with non-conjugated alkyl (sp3) and π-conjugated (sp2) linkers using π-extended donor and acceptor monomers that exhibit planar A-D-A structures. The non-conjugated alkyl linker provides structural flexibility to the (D-σ-A)n polymers, while the π-conjugated linker retains the rigid structure of the (D-π-A)n polymers. Photoinduced energy transfer occurs from the large donor to acceptor units in both polymers. However, the photoinduced energy transfer dynamics are found to be dependent on the conformation of the polymers, where the difference is dictated by the types of linkers between the donor and acceptor units. In solution, intramolecular energy transfer is relatively favorable for the (D-σ-A)n polymers with flexible linkers that allow the donor and acceptor units to be proximally located in the polymers. On the other hand, intermolecular (or interchain) energy transfer is dominant in the two polymer films because the π-extended donor and acceptor units in polymers are closely packed. The structural flexibility of the linkers between the donor and acceptor repeating units in the polymers affects the efficiency of energy transfer between the donor and acceptor units and the overall photophysical properties of the polymers.

Organic entities that can transport electrons are seldom available to develop adequate bipolar host materials applicable for solution-processable thermally activated delayed fluorescence (TADF)-organic light-emitting diodes (OLEDs). Therefore, the introduction of new electron-affine entities that plausibly demonstrate high triplet energy (ET) is of urgent need. In this contribution, we introduced benzimidazo[1,2-a][3,1]benzothiazine (BBIT) as a novel electron-affine entity and developed two new bipolar host materials, CzBBIT and 2CzBBIT. Both host materials exhibit high ET of 3.0 eV, superior thermal robustness with the thermal decomposition temperature of up to 392°C, a glass transition temperature of up to 161°C, and high solubility in common organic solvents. Consequently, the solution-processable OLEDs fabricated using a recognized IAcTr-out as the green TADF emitter doped into CzBBIT as the host, realized a maximum external quantum efficiency (EQE) of 23.3%, while the 2CzBBIT:IAcTr-out blend film-based device displayed an EQE of 18.7%. These outcomes corroborated that this work could shed light on the scientific community on the design of new electron-affine entities to establish the effective use of bipolar host materials toward proficient solution-processable TADF-OLEDs.

Abstract A highly crystalline conjugated donor (D)–acceptor (A) block copolymer (PBDT2T‐b‐N2200) that has good solubility in nonhalogenated solvents is successfully synthesized. PBDT2T‐b‐N2200 shows a broad complementary absorption behavior owing to a wide‐band gap donor (PBDT2T) present as a D‐block and a narrow‐band gap acceptor (N2200) present as an A‐block. Polymer solar cells (PSCs) with conjugated block copolymer (CBCP) are fabricated using a toluene solution and PSC created with an annealed film showing the highest power conversion efficiency of 6.43%, which is 2.4 times higher than that made with an annealed blend film of PBDT2T and N2200. Compared to the blend film, the PBDT2T‐b‐N2200 film exhibits a highly improved surface and internal morphology, as well as a faster photoluminescence decay lifetime, indicating a more efficient photoinduced electron transfer. In addition, the PBDT2T‐b‐N2200 film shows high crystallinity through an effective self‐assembly of each block during thermal annealing and a predominant face‐on chain orientation favorable to a vertical‐type PSC. Moreover, the CBCP‐based PSCs exhibit an excellent shelf‐life time of over 1020 h owing to their morphological stability. From these results, a D–A block copolymer system is one of the efficient strategies to improve miscibility and morphological stability in all polymer blend systems.

The highly contoured nature of the nose and the abundant free margin makes it especially difficult to reconstruct. In this report, we describe the use of a new helical rim free flap technique for the reconstruction of full-thickness nasal alar defects via supermicrosurgery. Briefly, after a wide excision with a margin of 0.7 cm, an alar defect with a size of 1×1×0.5cm was obtained, which included the full thickness of the skin, mucosa, and lower lateral cartilage. Vessel dissection was performed in a straightforward manner, starting from the incision margin for flap harvest, without any further dissection for reach the greater trunk of the superficial temporal artery. The flap was inset in order to match the contour of the contralateral ala. We closed the donor site via rotation and advancement. No donor site morbidity was observed, despite the presence of a small scar that could easily be covered with hair. The alar contour was satisfactory, and the patient was satisfied with the results. The supermicrosurgical technique did not require further dissection to identify the vessels for anastomosis, leading to better cosmetic outcomes and a reduced operating time.

Coherent phonon oscillations in the UV-Vis transient absorption and circular dichroism response of two chiral polyfluorene-based copolymer thin films are investigated. A slow oscillation in the hundred picosecond regime indicates the propagation of a longitudinal acoustic phonon with a frequency in the gigahertz range through cholesteric films of PFPh and PFBT, which allow for the optical determination of the longitudinal sound velocity in these polymers, with values of (2550 ± 140) and (2490 ± 150) m s−1, respectively. The oscillation is induced by a strain wave, resulting in a pressure-induced periodic shift of the electronic absorption bands, as extracted from a Fourier analysis of the transient spectra. The acoustic phonon oscillation is also clearly detected in the transient circular dichroism (TrCD) response of PFPh, indicating a transient pressure-induced shift of the CD spectrum and possibly also phonon-induced chirality changes via pitch length modulation of the cholesteric helical polymer stack.

This study demonstrated the use of a thermally crosslinked polyimide (PI) for the liquid crystal (LC) alignment layer of an LC display (LCD) cell. Polyamic acid was prepared using 4,4′-oxydianiline (ODA) and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA). The 6FDA−ODA-based polyimide (PI) prepared by the thermal cyclic dehydration of the polyamic acid (PAA) was soluble in various polar solvents. After forming a thin film by mixing trifunctional epoxide [4-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline] with the 6FDA−ODA-based PAA, it was confirmed that thermal curing at −110 °C caused an epoxy ring opening reaction, which could result in the formation of a networked polyimide not soluble in tetrahydrofuran. The crosslinked PI film showed a higher rigidity than the neat PI films, as measured by the elastic modulus. Furthermore, based on a dynamic mechanical analysis of the neat PI and crosslinked PI films, the glass transition temperatures (Tgs) were 217 and 339 °C, respectively, which provided further evidence of the formation of crosslinking by the addition of the epoxy reagent. After mechanical rubbing using these two PI films, an LC cell was fabricated using an anisotropic PI film as an LC alignment film. LC cells with crosslinked PI layers showed a high voltage holding ratio and low residual direct current voltage. This suggests that the crosslinked PI has good potential for use as an LC alignment layer material in advanced LCD technologies that require high performance and reliability.

Background Fractional CO2 laser is an effective treatment for scars, but most patients complain about sharp burning pain, even after the application of lidocaine ointment. This study analyzed the impact of a vibrating device to nonpharmacologically reduce the acute pain of laser treatment, in accordance with the gate control theory of pain management. Methods This is a prospective study performed from May 2013 through March 2014. Fifty-three patients (mean age, 26.7 years; range, 16–44 years) who had donated livers for liver transplantation were treated with a fractional CO2 laser (10,600 nm; model eCO2, Lutronic Corp) for their abdomen scars. Laser treatment was applied 4 months after surgery. A commercially available, locally applied vibrating device (model UM-30M, Unix Electronics Co. Ltd.) was used, in an on-and-off pattern, together with the CO2 laser. A visual analogue scale (VAS; 0, no pain; 10, most severe pain) of pain sensation was assessed and statistically analyzed using a paired t-test. Results The average VAS score for pain with the vibrating device was 4.60 and the average VAS score without the vibrating device was 6.11. The average difference between scores was 1.51 (P=0.001). Conclusions A locally applied vibrating device was demonstrated to be effective in reducing pain when treating with a fractional CO2 laser. Vibration treatment could be helpful when treating scars with fractional CO2 laser in pain-sensitive patients, particularly children.

We report the fabrication of photofunctional Co-Cr alloy plate that is prepared by a simple modification process for photodynamic application. Photoinduced functionality is provided by the photosensitizer of hematoporphyrin (Hp) that initially generates reactive oxygen species (ROS) such as superoxide anion radical and singlet oxygen. The photosensitizer with carboxyl group was chemically bonded to the surface of the Co-Cr alloy plate by esterification reaction. Microstructure and elemental composition of the Co-Cr alloy plate were checked with scanning electron microscopy (SEM) and energy dispersive X-ray spectrometer (EDS). Fabrication of the photofunctionality of the Co-Cr alloy plate was confirmed with X-ray photoelectron spectroscopy (XPS), reflectance UV-Vis absorption, and emission spectroscopy. Reactive oxygen generation from the photofunctional Co-Cr alloy plate was confirmed by using the decomposition reaction of 1,3-diphenylisobenzofuran (DPBF). The results suggest that the immobilized photosensitizer molecules on the surface of Co-Cr alloy plate still possess their optical and functional properties including reactive oxygen generation. To open the possibility for its application as a photodynamic material to biological system, the fabricated photofunctional Co-Cr alloy is applied to the decomposition of smooth muscle cells.

Human IgG1 Fc has been widely used as a bioconjugate, but exhibits shortcomings, such as antibody- and complement-mediated cytotoxicity as well as decreased bioactivity, when applied to agonistic proteins. Here, we constructed a nonimmunogenic, noncytolytic and flexible hybrid Fc (hyFc) consisting of IgD and IgG4, and tested its function using erythropoietin (EPO) conjugate, EPO-hyFc. Despite low amino acid homology (20.5%) between IgD Fc and IgG4 Fc, EPO-hyFc retained "Y-shaped" structure and repeated intravenous administrations of EPO-hyFc into monkeys did not generate EPO-hyFc-specific antibody responses. Furthermore, EPO-hyFc could not bind to FcγR I and C1q in contrast to EPO-IgG1 Fc. In addition, EPO-hyFc exhibited better in vitro bioactivity and in vivo bioactivity in rats than EPO-IgG1 Fc, presumably due to the high flexibility of IgD. Moreover, the mean serum half-life of EPO-hyFc(H), a high sialic acid content form of EPO-hyFc, was approximately 2-fold longer than that of the heavily glycosylated EPO, darbepoetin alfa, in rats. More importantly, subcutaneous injection of EPO-hyFc(H) not only induced a significantly greater elevation of serum hemoglobin levels than darbepoetin alfa in both normal rats and cisplatin-induced anemic rats, but also displayed a delayed time to maximal serum level and twice final area-under-the-curve (AUC(last)). Taken together, hyFc might be a more attractive Fc conjugate for agonistic proteins/peptides than IgG1 Fc due to its capability to elongate their half-lives without inducing host effector functions and hindering bioactivity of fused molecules. Additionally, a head-to-head comparison demonstrated that hyFc-fusion strategy more effectively improved the in vivo bioactivity of EPO than the hyperglycosylation approach.