Search

Mist cannon trucks have been widely applied in megacities in China to reduce the road dust, since they are considered to be more water saving and efficient than the traditional sprinkling trucks. However, their effect on the formation of water-soluble organic compounds and the pollution control of fine particles (PM2.5) remains unknown. We characterized the variations of chemical compositions in PM2.5 collected on the road sides during the simulated operations of mist cannon truck and traditional sprinkling truck via Fourier transform ion cyclotron resonance mass spectrometry and ion chromatography. The mass concentrations of water-soluble organic carbon in PM2.5 showed a significant increase (62 %–70 %) after air spraying. Furthermore, we found that water-soluble organic compounds, particularly organic nitrates, increased significantly via the interactions of reactive gas-phase organics, atmospheric oxidants and aerosol liquid water after air spraying, although the air spraying had a better effect on suppressing road dust than the ground aspersion. Moreover, the formation of PM2.5 on the road segment where the mist cannon truck passed by was promoted, with an increase of up to 13 % in mass concentration after 25–35 min, on average. Thus, the application of mist cannon trucks potentially worsens the road atmospheric environment through the increase in PM2.5 levels and the production of a large number of water-soluble organic compounds in PM2.5. The overall results provide not only valuable insights to the formation processes of water-soluble organic compounds associated with aerosol liquid water in the road environment but also management strategies to regulate the operation of mist cannon trucks in China.

This study presents a design of a 94-GHz high-performance and highly compact frequency-modulated continuous-wave radar sensor. In this sensor, an X-band CMOS-based all-digital phase-locked loop chip, W-band SiGe-based transceiver monolithic microwave integrated circuit (MMIC), and W-band GaN-based MMIC power amplifier (PA) are heterogeneously integrated (HI). Each part of the 130-nm bipolar complementary metal-oxide-semiconductor (BiCMOS) SiGe-based transceiver MMIC is designed to include a low-noise amplifier, PA, octupler, mixer, and lange coupler. The fabrication process of our in-house silicon-based MEMS photosensitive composite film is developed to provide very high-density integration and very low insertion loss of interconnections between chips. The HI front end of the radar sensor is measured on-wafer with a high output power of 22 dBm. Moreover, a low double-sideband noise figure (NF) of 10.2 dB is obtained. Bonding-substrate integrated waveguide (SIW)-WG transitions between the heterogeneously integrated front end and the antenna are specially designed and verified. A 2.3-dB degradation is observed, where 19.7 dBm is measured at the transmitter WG WR-10-flange. Thus, the sensor offers a 55-dB dynamic range at a 2-m position with an expectation of a long-distance target-detection range. The radar sensor has an 11.7-cm range resolution and is only 60 x 40 x 8 mm³ in size, with a weight of only 78 g.