Search

Direct structural modification of small‐molecule fluorophores represents a straightforward and appealing strategy for accessing new fluorescent dyes with desired functionalities. We report herein a general and efficient visible‐light‐mediated method for the direct C−H functionalization of BODIPY, an important fluorescent chromophore, using readily accessible and bench‐stable aryl and alkenylthianthrenium salts. This practical approach operates at room temperature with extraordinary site‐selectivity, providing a step‐economical means to construct various valuable aryl‐ and alkenyl‐substituted BODIPY dyes. Remarkably, this protocol encompasses a broad substrate scope and excellent functional‐group tolerance, and allows for the modular synthesis of sophisticated symmetrical and asymmetrical disubstituted BODIPYs by simply employing different combinations of thianthrenium salts. Moreover, the late‐stage BODIPY modification of complex drug molecules further highlights the potential of this novel methodology in the synthesis of fluorophore‐drug conjugates. [ABSTRACT FROM AUTHOR]

Textile‐based generators that can convert low‐grade energy from the human body or environment into sustainable electricity have generated immense scientific interest in self‐powered wearable applications. However, their low power density and environmental suitability have extremely restricted their portable applications in complex and mutable environments. Herein, an asymmetric sandwich structure between molybdenum disulfide (MoS2)‐carbonized silks (MCs) and MoS2/MXene–Cottons (MMCs) to construct efficient thermo–hydroelectric generators (THEGs) that synergistically harvest heat‐moisture energy to generate considerable electricity is rationally designed. Notably, the large surface area of MoS2/MXene van der Waals heterojunctions (vdWhs) enables efficient charge collection, and the vertical MoS2 nanosheet arrays supply abundant nanochannels for a highly efficient hydration effect, generating an output power density of 32.26 µW cm−2 after wetting with deionized water. Combined with the sensitive temperature recognition ability with a Seebeck coefficient of 23.5 µV K−1, the application possibilities of these prepared THEGs in the mutual conversion of fingertip temperature/language, and the monitoring of the human physiological state is foresee. [ABSTRACT FROM AUTHOR]

Electronic textiles present an enticing prospect for personal health assessment and physical monitoring, owing to their strong stretchability, high flexibility, mechanical robustness and high capacity in sensing small deformations in human motions. Herein, a multifunctional robust flexible knitting-shaped strain sensor based on the functional heterostructure composed of the conductive MXene (Ti3C2Tx) nanosheet and the antimicrobial Cu2O nanoparticles is prepared via a solution-processable dip-dry coating approach. The textile-based strain sensor exhibits a highly stable and immediate response over a wide range, which shows great advantages in detecting and monitoring human activities, such as smiling, swallowing, and wrist/finger/joint bending. Significantly, these prepared strain sensors present a promising application in smart wear, which was typically employed as the smart sensing gloves in barrier-free communication for hearing-impaired people. Interestingly, the different resistance evolutions of the knitted sensor under both low and high strain were carried out to study the sensing mechanism for the first time. Notably, the strain sensor displays a reliable antibacterial efficiency of ∼99.1% for Escherichia coli and outstanding breathability as high as 190 mm/s. This developed MXene/Cu2O hybrid materials supplies a new insight for the rational design and synthesis of multifunctional nanomaterials, as well as the achievement of the flexible wearable sensor with high performance. [ABSTRACT FROM AUTHOR]

Objective To investigate the effect and molecular mechanisms of Notch signaling in the protection of neuropeptide substance P (SP) in hyperoxia-exposed alveolar type II epithelial cells (AECII). Methods AECII were isolated from the lung of 19-day rat fetus and then cultured in six-well plates. The cells were randomly divided into air group, hyperoxia group, hyperoxia + SP group, and hyperoxia + SP + antagonist group. Air group was exposed to 21% oxygen and hyperoxia group was exposed to 95% oxygen for 24 hours, respectively. SP was added into hyperoxia + SP group before oxygen exposure, while SP and its receptor antagonist (L703.606) were added into hyperoxia +SP + antagonist group simultaneously before oxygen exposure; then both groups were exposed to 95% oxygen for 24 hours. Flow cytometry and MTT colorimetric assay were used to detect the ability of cell proliferation; the intracellular superoxide anion level was detected by SpectraMax M5/M5e and confocal microscopy; the mRNA and protein expressions of Notch1 and Notch3 were assessed by QPCR and Western blot analysis, respectively. Results Compared with those in air group, the apoptosis rate and the intracellular superoxide anion concentration were significantly increased, while the proliferation rate of cells was significantly decreased in hyperoxia group (P<0.01). In contrast, the apoptosis rate and the intracellular superoxide anion concentration were lower and the cell proliferation rate were higher in hyperoxia SP group than in hyperoxia group (P<0.01). Hyperoxia exposure resulted in significantly decreased expression of Notch1 and increased expression of Notch3 (P<0.01), while SP treatment reversed the above results significantly (P<0.01). These parameters did not differ significantly between hyperoxia group and hyperoxia + SP + L703.606 group. Conclusion SP can reduce the hyperoxia-induced AEC damage and death and promote cell proliferation, which is associated with the activation of Notch signal transduction pathway. [ABSTRACT FROM AUTHOR]

A laboratory incubation test with meadow brown soil was conducted to study the inhibitory effect of 3,4-dimethylpyrazole phosphate (DMPP) on soil nitrification as affected by soil moisture content (40%, 60% and 80% of the maximum field capacity), pH (4, 7 and 10), and organic matter (retained and removal). With the decrease of soil moisture content, the degradation of DMPP in soil tended to slow down, and the oxidation of soil NH4+ was more inhibited. At pH 10, more DMPP was remained in soil, and had the greatest inhibitory effect; at pH 7 and pH 4, the DMPP was lesser remained, with a smaller inhibitory effect. The removal of organic matter prolonged the remaining time of DMPP in soil, and decreased the apparent soil nitrification rate significantly. [ABSTRACT FROM AUTHOR]

Flexible hydroelectric generators (HEGs) are promising self-powered devices that spontaneously derive electrical power from moisture. However, achieving the desired compatibility between a continuous operating voltage and superior current density remains a significant challenge. Herein, a textile-based van der Waals heterostructure is rationally designed between conductive 1T phase tungsten disulfide@carbonized silk (1T-WS 2 @CSilk) and carbon black@cotton (CB@Cotton) fabrics with an asymmetric distribution of oxygen-containing functional groups, which enhances the proton concentration gradients toward high-performance wearable HEGs. The vertically staggered 1T-WS 2 nanosheet arrays on the CSilk fabric provide abundant hydrophilic nanochannels for rapid carrier transport. Furthermore, the moisture-induced primary battery formed between the active aluminum (Al) electrode and the conductive textiles introduces the desired electric field to facilitate charge separation and compensate for the decreased streaming potential. These devices exhibit a power density of 21.6 µW cm -2 , an open-circuit voltage (V oc ) of 0.65 V sustained for over 10 000 s, and a current density of 0.17 mA cm -2 . This performance makes them capable of supplying power to commercial electronics and human respiratory monitoring. This study presents a promising strategy for the refined design of wearable electronics., (© 2024 Wiley‐VCH GmbH.)

Herein, a novel ratiometric sensor for fluorimetric and smartphone-assisted visual detection of Al 3+ in environmental water was developed based on the target-regulated formation of Eu metal-organic frameworks (Eu MOFs). By employing 2-[4-(2-hydroxyethyl) piperazin-1-yl] ethanesulfonic acid (Hepes), Eu 3+ and tetracycline (TC) as raw materials, Eu MOFs with red emission were facilely synthesized through the coordination of Eu 3+ with Hepes and TC. However, upon the introduction of Al 3+ , a higher affinity of TC towards Al 3+ resulted in the formation of a TC-Al 3+ complex with green fluorescence and inhibited the generation of Eu MOFs. This led to an increase in green fluorescence and a decrease in red fluorescence accompanied by the fluorescence color of the solution changing from red to green under the illumination of the UV lamp. Thus, a ratiometric sensor for fluorimetric and the smartphone-assisted visual detection of Al 3+ was established. The ratiometric sensor exhibited high sensitivity for Al 3+ detection with a detection limit of 0.14 μM for fluorescence detection and 1.21 μM for visual detection. Additionally, the proposed strategy was successfully applied to detect Al 3+ in the environmental water samples with satisfactory results, indicating great application prospects for environmental monitoring.

Objective: To investigate the therapeutic effects of puerarin on rats with type 2 diabetes mellitus (T2DM)., Methods: T2DM models were established by high fat and high glucose feeding combined with a one-time intraperitoneal injection of streptozotocin (STZ, 60 mg/kg). Then the rats were randomly divided into normal group, model group, metformin group (MET, 40 mg/kg), puerarin low-dose group, medium-dose group and high-dose group (40, 80, 160 mg/kg), n=10. After the model was successfully established, rats were treated with corresponding drug intervention by intragastrical administration for 4 weeks. The body weight and fasting blood glucose (FBG) were measured per week, and blood samples were collected 24 h after the last administration, and serum levels of blood glucose, serum triglyceride (TG), total cholesterol (TC), low-density lipoprotein-cholesterol (LDL-C), high-density lipoprotein-cholestrol (HDL-C), serum enzyme activities of aspartate aminotransferase (AST), alanine aminotransferase (ALT), blood urea nitrogen (BUN), serum creatinine (SCr), and blood uric acid (UA) were measured., Results: As compared with normal group, the body weight was decreased after 4 weeks-intervention in the model group, and the levels of FBG, TC, TG, LDL-C, ALT, AST, BUN, SCr and UA were all increased,while HDL-C level was decreased (P＜0.05). As compared with model group,the body weight was increased after 4 weeks-intervention in metformin group and puerarin groups, and the levels of FBG, TC, TG, LDL-C, ALT, AST, BUN, SCr and UA were decreased (P＜0.01); meanwhile, HDL-C level was increased significantly (P＜0.05)., Conclusion: Puerarin can reduce the weight loss of T2DM rats, decrease the blood lipid and blood glucose levels of T2DM rats, which can be used to control T2DM.

(1) In this paper type 316 stainless steel metal plate as the research object, the selection of sample detecting position was studied when thin film method X-ray fluorescence measurement was conducted. The study showed that the optimal location for the sample detection was sample distance X-ray tube and detector baseline 1cm with the baseline into a 16°angle. (2) Heavy metal pollutants of Pb, Cd and Cr in industrial ambient air as the main analysis object, when thin film method X-ray fluorescence conducted with lead plate protection, X-rays will penetrate the membrane and continuely stimulate the protective lead plate. Therefore there is lead spectral line interference in the filter membrane background spectrum, which will affect the detection of lead element in real samples. Studies show that when a layer of isolating material was applied between the thin sample and the protective lead plate, the interference of lead line can effectively be avoided. (3) Several rigid insulating material of type 316 stainless steel, brass, aluminum, red copper and PTEE as lead inner material were selected and studied. The study results showed that compared with X-ray fluorescence spectra of other lead inner materials, the X-ray fluorescence spectrum of red copper contained the least element spectral lines. There were not Cr, Cd and Pb spectrum peaks in the X-ray fluorescence spectrum of red copper. And the target timber scattering spectrum intensity in the high energy part was weaker compared to other X-ray fluorescence spectrum. The above analysis shows that red copper has the minimal disturbance to the actual measurement of heavy metals Cr, Cd and Pb. At the same time, red copper as lead inner materials can effectively avoid the interference of lead spectrum line in lead plate. So red copper is the best lead plate inner materials in thin film method X-ray fluorescence spectroscopy measurement. This study provides an important theoretical basis for the assembling and setting'up air and water weight metal X-ray fluorescence spectrometer.

A laboratory incubation test with meadow brown soil was conducted to study the inhibitory effect of 3,4-dimethylpyrazole phosphate (DMPP) on soil nitrification as affected by soil moisture content (40%, 60% and 80% of the maximum field capacity), pH (4, 7 and 10), and organic matter (retained and removal). With the decrease of soil moisture content, the degradation of DMPP in soil tended to slow down, and the oxidation of soil NH4+ was more inhibited. At pH 10, more DMPP was remained in soil, and had the greatest inhibitory effect; at pH 7 and pH 4, the DMPP was lesser remained, with a smaller inhibitory effect. The removal of organic matter prolonged the remaining time of DMPP in soil, and decreased the apparent soil nitrification rate significantly.