Search

Low Power Design has become a significant requirement when the CMOS technology entered the nanometer era. Multiple-Supply Voltage (MSV) is a popular and effective method for both dynamic and static power reduction while maintaining performance. Level shifters may cause area and Interconnect Length Overhead (ILO), and should be considered at both floorplanning and post-floorplanning stages. In this paper, we propose a two phases algorithm framework, called VLSAF, to solve voltage and level shifter assignment problem. At floorplanning phase, we use a convex cost network flow algorithm to assign voltage and a minimum cost flow algorithm to handle level-shifter assignment. At post-floorplanning phase, a heuristic method is adopted to redistribute white spaces and calculate the positions and shapes of level shifters. The experimental results show VLSAF is effective., Comment: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, 2009

As technology scales, low power design has become a significant requirement for SOC designers. Among the existing techniques, Multiple-Supply Voltage (MSV) is a popular and effective method to reduce both dynamic and static power. Besides, level shifters consume area and delay, and should be considered during floorplanning. In this paper, we present a new floorplanning system, called MVLSAF, to solve multi-voltage and level shifter assignment problem. We use a convex cost network flow algorithm to assign arbitrary number of legal working voltages and a minimum cost flow algorithm to handle level-shifter assignment. The experimental results show MVLSAF is effective.

Network-on-chip (NoC) architectures have been proposed as a promising alternative to classical bus-based communication architectures. In this paper, we propose a two phases framework to solve application-specific NoCs topology generation problem. At floorplanning phase, we carry out partition driven floorplanning. At post-floorplanning phase, a heuristic method and a min-cost max-flow algorithm is used to insert switches and network interfaces. Finally, we allocate paths to minimize power consumption. The experimental results show our algorithm is effective for power saving.

Low power design has become one of the most significant requirements when CMOS technology entered the nanometer era. Therefore, timing budget is often performed to slow down as many components as possible so that timing slacks can be applied to reduce the power consumption while maintaining the performance of the whole design. Retiming is a procedure that involves the relocation of flip-flops (FFs) across logic gates to achieve faster clocking speed. In this paper we show that the retiming and slack budgeting problem can be formulated to a convex cost dual network flow problem. Both the theoretical analysis and experimental results show the efficiency of our approach which can not only reduce power consumption by 8.9%, but also speedup previous work by 500 times.