Search

In the quality control of medicines and the fight against the phenomenon of poor quality medicines, there is an urgent need for rapid and broad spectrum methods for screening these types of medicines. In the present work, we have used near infrared spectroscopy combined with multivariate data analysis to develop chemometric models for the classification and quantification of metronidazole in Burkina Faso pharmaceutical formulations. For this purpose, drug samples were collected in drugstores located in different Burkina Faso border zones. Four product classes were defined based on the national nomenclature: 3 classes for the generic drugs (C1, C3, and C4) and one class for the reference (C2) drugs. The exploratory analysis using PCA identified two clusters of drugs within class C1. Discrimination was confirmed by the developed and optimised DD-SIMCA model, with only one target class. The quality control of the samples from product class C1 was proven to be very satisfactory with specificities and sensitivities of 100%. The quantification models developed with the PLS-R method were successfully applied for the determination of the active ingredient content in the samples, with acceptable relative bias between 0.15 and 12.7 % with respect to the dose determined by the HPLC method. The RMSEC was estimated at 13.57 (R2, 0.9937), the RMSECV at 18.07 (R2, 0.9888) and the RMSEP at 13.69 (R2, 0.9941).The models developed and the results obtained are promising for routine quality control of similar formulations of metronidazole.

A commercially available thin-layer flow-through amperometric detector, with the sensing block customized in an original design, was applied to the screening of drug compounds known as acetylcholinesterase (AChE) inhibitors. AChE from electric eel was covalently immobilized onto a cysteamine modified gold disk adjacent to a silver disk working electrode. On-line studies were performed by flow injection analysis (FIA) in PBS buffer pH 7.4. Seven commercially available AChE inhibitors used in the medical field, namely neostigmine, eserine, tacrine, donepezil, rivastigmine, pyridostigmine and galantamine as well as two natural compounds, quercetin and berberine, were investigated. The same trend of inhibitory potency as described in the literature was observed. Of particular interest and in addition to the determination of the IC50 values, this flow-through system allowed the study of both, the stability of the enzyme-inhibitor complex and the kinetic of the enzyme activity recovery.

A selective and sensitive electroanalytical method was developed for arsenic determination based on a nanogold (AuNP) modified solid carbon paste working electrode (SCPE) modified in two steps (i) physisorption and (ii) additional electrodeposition of nanogold particles in the presence of iodide. Copper(II) interference was solved by covering the gold layer by a self assembled mono layer (SAM) of glutathione. Using DPASV a linear response of the signal was obtained as a function of As(III) in the concentration range 0.05–20 µM (4–1498 ppb) with a limit of detection of 0.01 µM (0.9 ppb). Sample stirring and degassing were not needed. Application to the determination of arsenic(III) and (V) in underground water samples from Burkina Faso was successfully achieved.

Mercury (II) measurements were performed thanks to a newly developed electrochemical method using a disposable gold modified screen printed carbon electrode. The method has a wide dynamic range (1-100 µg/L), a good accuracy and a limit of detection in compliance with WHO standards. The application of the method to several groundwater samples made it possible to identify, for the first time, mercury content higher than the recommended WHO standard value in a gold mining activity area in the northern part of Burkina Faso. The accuracy of the assay was checked by ICP/MS.

An immunoassay for the determination of anti-tetani antibodies has been developed using a screen printed electrode (SPE) as solid support for toxoid (antigen) immobilization. The assay was performed in guinea pig serum. The immunoreaction and the subsequent amperometric detection occurred directly onto the SPE surface. The assay consisted of spiking the anti-tetani sample directly onto the toxoid modified SPE, and then a second antibody, i.e. a HRP-labeled anti-immunoglobulin G, was deposited onto the biosensor. Subsequent amperometric detection was realized by spiking 10 µL of a hydroquinone (HQ) solution into 40 µL of buffer solution containing hydrogen peroxide. An experimental design approach was implemented for the optimization of the immunoassay. The variables of interest, such as bovine serum albumin (BSA) concentration, incubation times and labeled antibody dilution, were optimized with the aid of the response surface methodology using a circumscribed central composite design (CCCD). It was observed that two factors exhibited the greatest impact on the response, i.e. the anti-tetani incubation time and the dilution factor of the labeled antibody. It was discovered that in order to maximize the response, the dilution factor should be small, while the anti-tetani antibody incubation time should be long. The BSA concentration and the HRP-anti-IgG incubation had very limited influence. Under the optimized conditions, the immunoassay had a limit of detection of 0.011 IU/mL and a limit of quantification of 0.012 IU/mL. These values were below the protective human antibody limit of 0.06 IU/mL.

Liquid chromatography coupled to a silver electrode based flow-through amperometric detector (LC-EC-Ag) was developed for the determination of aminothiols in white wines. The C18 reversed phase LC system operated in the isocratic mode at 0.7 mL min(-1) and used an acidic mobile phase composed of formic acid, EDTA, sodium nitrate, sodium hydroxide, and methanol 1% (v/v) at pH 4.5. The working electrode operated at 0.08 V vs Ag/AgCl, 3 M KCl and its manual cleaning was realized once a month by smoothing on a polishing cloth. The analyzed aminothiols were resolved and eluted within 4 min, and all standard curves were linear in the range 2 x 10(-7)-2 x 10(-5) M. The analyzed wine samples needed no preparation other than dilution with the mobile phase. The concentration of cysteine (CYS), homocysteine (HCYS), glutathione (GSH) and N-acetylcysteine (NAC) in bottled white wines, determined by the method of standard addition, was found to be in the low mu M range (0.2-2 mg L-1) depending on the wine type and its age. (C) 2013 Elsevier B.V. All rights reserved.

International audience