Search

Over the next decade, the extremely brilliant fourth generation synchrotron radiation sources are set to become a key driving force in materials characterization and technology development. In this study, we present a conceptual design of a versatile "Materia" diffraction and imaging beamline for a low-emittance synchrotron radiation facility. The beamline was optimized for operation with three main principal delivery regimes: parallel collimated beam ∼1 mm beam size, micro-focus regime with ∼10 μm beam spot size on the sample, and nano-focus regime with <100 nm focus. All regimes will operate in the photon energy range of 10-30 keV with the key feature of the beamline being fast switching between them, as well as between the various realizations of diffraction and imaging operation modes while maintaining the target beam position at the sample, and with both spectrally narrow and spectrally broad beams up to the energy band ΔE/E of 5 × 10 -2 . The manuscript presents the details of the principal characteristics selected for the insertion device and beamline optics, the materials characterization techniques, including the simulations of thermal load impact on the critical beamline optics components. Significant efforts were made to design the monochromators to mitigate the very high beam power load produced by a superconducting undulator source. The manuscript will be of interest to research groups involved in the design of new synchrotron beamlines.

We study the crystallization of colloidal dispersions under capillary-action-induced shear as the dispersion is drawn into flat walled capillaries. Using confocal microscopy and small angle x-ray scattering, we find that the shear near the capillary walls influences the crystallization to result in large random hexagonal close-packed (RHCP) crystals with long-range orientational order over tens of thousands of colloidal particles. We investigate the crystallization mechanism and find partial crystallization under shear, initiating with hexagonal planes at the capillary walls, where shear is highest, followed by epitaxial crystal growth from these hexagonal layers after the shear is stopped. We then characterize the three-dimensional crystal structure finding that the shear-induced crystallization leads to larger particle separations parallel to the shear and vorticity directions as compared to the equilibrium RHCP structure. Confocal microscopy reveals that competing shear directions, where the capillary walls meet at a corner, create differently oriented hexagonal planes of particles. The single-orientation RHCP colloidal crystals remain stable after formation and are produced without the need of complex shear cell arrangements.

To explore an effective route of customizing the superelasticity (SE) of NiTi shape memory alloys via modifying the grain structure, binary Ni 55 Ti 45 (wt) alloys were fabricated in as-cast, hot swaged, and hot-rolled conditions, presenting contrasting grain sizes and grain boundary types. In situ synchrotron X-ray Laue microdiffraction and in situ synchrotron X-ray powder diffraction techniques were employed to unravel the underlying grain structure mechanisms that cause the diversity of SE performance among the three materials. The evolution of lattice rotation, strain field, and phase transformation has been revealed at the micro- and mesoscale, and the effect of grain structure on SE performance has been quantified. It was found that (i) the Ni 4 Ti 3 and NiTi 2 precipitates are similar among the three materials in terms of morphology, size, and orientation distribution; (ii) phase transformation happens preferentially near high-angle grain boundary (HAGB) yet randomly in low-angle grain boundary (LAGB) structures; (iii) the smaller the grain size, the higher the phase transformation nucleation kinetics, and the lower the propagation kinetics; (iv) stress concentration happens near HAGBs, while no obvious stress concentration can be observed in the LAGB grain structure during loading; (v) the statistical distribution of strain in the three materials becomes asymmetric during loading; (vi) three grain lattice rotation modes are identified and termed for the first time, namely, multi-extension rotation, rigid rotation, and nondispersive rotation; and (vii) the texture evolution of B2 austenite and B19' martensite is not strongly dependent on the grain structure.

We demonstrate experimentally the ability to use a single-pixel detector for two-dimensional high-resolution x-ray imaging of fast dynamics. We image the rotation of a spinning chopper at 100 kHz and at spatial resolution of about 40 microns by using the computational ghost imaging approach. The technique we develop can be used for the imaging of fast dynamics of periodic and periodically stimulated effects with a large field of view and at low dose.

Nylon-12 is an important structural polymer in wide use in the form of fibres and bulk structures. Fused filament fabrication (FFF) is an extrusion-based additive manufacturing (AM) method for rapid prototyping and final product manufacturing of thermoplastic polymer objects. The resultant microstructure of FFF-produced samples is strongly affected by the cooling rates and thermal gradients experienced across the part. The crystallisation behaviour during cooling and solidification influences the micro- and nano-structure, and deserves detailed investigation. A commercial Nylon-12 filament and FFF-produced Nylon-12 parts were studied by differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS) to examine the effect of cooling rates under non-isothermal crystallisation conditions on the microstructure and properties. Slower cooling rates caused more perfect crystallite formation, as well as alteration to the thermal properties.

We demonstrate computational ghost imaging at X-ray wavelengths with only one single-pixel detector. We show that, by using a known designed mask as a diffuser that induces intensity fluctuations in the probe beam, it is possible to compute the propagation of the electromagnetic field in the absence of the investigated object. We correlate these calculations with the measured data when the object is present in order to reconstruct the images of 50 μm and 80 μm slits. Our results open the possibilities for X-ray high-resolution imaging with partially coherent X-ray sources and can lead to a powerful tool for X-ray three-dimensional imaging.

The X-ray Birefringence Imaging (XBI) technique, first reported in 2014, is a sensitive method for spatially resolved mapping of the local orientational properties of anisotropic materials. We report the first application of the XBI technique to characterize molecular orientational ordering in a liquid crystalline material, demonstrating significant potential for exploiting XBI measurements to advance structural understanding of liquid crystal phases.

Systematic studies of the performance of a water-cooled X-ray monochromator, designed and built for the B16 Test beamline at the Diamond Light Source, UK, are presented. A technical description of the monochromator is given and the results of commissioning measurements are discussed. Overall, the monochromator satisfies the original specifications well and meets all the major requirements of the versatile beamline. Following its successful implementation on B16, the basic monochromator design has been reproduced and adapted on other Diamond Light Source beamlines, including B18 and B21., (open access.)

Absolute measurements of the radiolytic yield of Fe3+ in a ferrous sulphate dosimeter formulation (6 mM Fe2+), with a 20 keV x-ray monoenergetic beam, are reported. Dose-rate suppression of the radiolytic yield was observed at dose rates lower than and different in nature to those previously reported with x-rays. We present evidence that this effect is most likely to be due to recombination of free radicals radiolytically produced from water. The method used to make these measurements is also new and it provides radiolytic yields which are directly traceable to the SI standards system. The data presented provides new and exacting tests of radiation chemistry codes.

The strain-induced softening of thermoplastic polyurethane elastomers (TPUs), known as the Mullins effect, arises from their multi-phase structure. We used the combination of small- and wide- angle X-ray scattering (SAXS/WAXS) during in situ repeated tensile loading to elucidate the relationship between molecular architecture, nano-strain, and macro-scale mechanical properties. Insights obtained from our analysis highlight the importance of the 'fuzzy interface' between the hard and soft regions that governs the structure evolution at nanometre length scales and leads to macroscopic stiffness reduction. We propose a hierarchical Eshelby inclusion model of phase interaction mediated by the 'fuzzy interface' that accommodates the nano-strain gradient between hard and soft regions and undergoes tension-induced softening, causing the Mullins effect that becomes apparent in TPUs even at moderate tensile strains.

A new synchrotron-based technique for elemental imaging that combines radiography and fluorescence spectroscopy has been developed and applied to study the spatial distribution of Ag, Zr and Mo in an Al alloy during heating and melting to 700, and then re-soldification. For the first time, multi-element distributions have been mapped independently and simultaneously, showing the dissolution of Ag- and Zr-rich particles during melting and the inter-dendritic segregation of Ag during re-solidification. The new technique is shown to have wide potential for metallurgical and materials science applications where the dynamics of elemental re-distribution and segregation in complex alloys is of importance.

Thermoplastic polyurethane elastomers enjoy an exceptionally wide range of applications due to their remarkable versatility. These block co-polymers are used here as an example of a structurally inhomogeneous composite containing nano-scale gradients, whose internal strain differs depending on the length scale of consideration. Here we present a combined experimental and modelling approach to the hierarchical characterization of block co-polymer deformation. Synchrotron-based small- and wide-angle X-ray scattering and radiography are used for strain evaluation across the scales. Transmission electron microscopy image-based finite element modelling and fast Fourier transform analysis are used to develop a multi-phase numerical model that achieves agreement with the combined experimental data using a minimal number of adjustable structural parameters. The results highlight the importance of fuzzy interfaces, that is, regions of nanometre-scale structure and property gradients, in determining the mechanical properties of hierarchical composites across the scales.

The X-ray birefringence imaging (XBI) technique, reported very recently, is a sensitive tool for spatially resolved mapping of the local orientational properties of anisotropic materials. In this paper, we report the first XBI measurements on materials that undergo anisotropic molecular dynamics. Using incident linearly polarized X-rays with energy close to the Br K-edge, the X-ray birefringence is dictated by the orientational properties of the C-Br bonds in the material. We focus on two materials (urea inclusion compounds containing 1,8-dibromooctane and 1,10-dibromodecane guest molecules) for which the reorientational dynamics of the brominated guest molecules (and hence the reorientational dynamics of the C-Br bonds) are already well characterized by other experimental techniques. The XBI results demonstrate clearly that, for the anisotropic molecular dynamics in these materials, the effective X-ray optic axis for the X-ray birefringence phenomenon is the time-averaged resultant of the orientational distribution of the C-Br bonds.

The synthesis and properties of gemini surfactants of the type (R(1)(CO)-Lys(H)-NH)2(CH2)n are reported. For a spacer length of n = 6, the hydrophobic acyl tail was varied in length (R(1) = C8, C10, C12, C14, C16, and C18) and, for R(1) = C18, the degree of unsaturation. For R(1)(CO) = oleoyl (C18:1 Z) the spacer length (n = 2-8) and the stereochemistry of the lysine building block were varied; a 'half-gemini' derivative with a single oleoyl tail and head group was also prepared. The potential of the gemini surfactants to transfer polynucleotides across a cell membrane was investigated by transfection of HeLa cells with beta-galactosidase, both in the presence and absence of the helper lipid DOPE. Oleoyl was found to be by far the best hydrophobic tail for this biological activity, whereas the effect of the lysine stereochemistry was less pronounced. The effect of an optimum spacer length (n = 6) was observed only in the absence of helper lipid. The most active surfactant, i.e. the one with oleoyl chains and n = 6, formed liposomes with sizes in the range of 60-350 nm, and its lipoplex underwent a transition from a lamellar to a hexagonal morphology upon lowering the pH from 7 to 3.

The polarizing optical microscope has been used since the 19th century to study the structural anisotropy of materials, based on the phenomenon of optical birefringence. In contrast, the phenomenon of x-ray birefringence has been demonstrated only recently and has been shown to be a sensitive probe of the orientational properties of individual molecules and/or bonds in anisotropic solids. Here, we report a technique-x-ray birefringence imaging (XBI)-that enables spatially resolved mapping of x-ray birefringence of materials, representing the x-ray analog of the polarizing optical microscope. Our results demonstrate the utility and potential of XBI as a sensitive technique for imaging the local orientational properties of anisotropic materials, including characterization of changes in molecular orientational ordering associated with solid-state phase transitions and identification of the size, spatial distribution, and temperature dependence of domain structures., (Copyright © 2014, American Association for the Advancement of Science.)

Human enamel is a typical hierarchical mineralized tissue with a two-level composite structure. To date, few studies have focused on how the mechanical behaviour of this tissue is affected by both the rod orientation at the microscale and the preferred orientation of mineral crystallites at the nanoscale. In this study, wide-angle X-ray scattering was used to determine the internal lattice strain response of human enamel samples (with differing rod directions) as a function of in situ uniaxial compressive loading. Quantitative stress distribution evaluation in the birefringent mounting epoxy was performed in parallel using photoelastic techniques. The resulting experimental data was analysed using an advanced multiscale Eshelby inclusion model that takes into account the two-level hierarchical structure of human enamel, and reflects the differing rod directions and orientation distributions of hydroxyapatite crystals. The achieved satisfactory agreement between the model and the experimental data, in terms of the values of multidirectional strain components under the action of differently orientated loads, suggests that the multiscale approach captures reasonably successfully the structure-property relationship between the hierarchical architecture of human enamel and its response to the applied forces. This novel and systematic approach can be used to improve the interpretation of the mechanical properties of enamel, as well as of the textured hierarchical biomaterials in general., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Human enamel is a hierarchical mineralized tissue with a two-level composite structure. Few studies have focused on the structure-mechanical property relationship and its link to the multi-scale architecture of human enamel, whereby the response to mechanical loading is affected not only by the rod distribution at micro-scale, but also strongly influenced by the mineral crystallite shape, and spatial arrangement and orientation. In this study, two complementary synchrotron X-ray diffraction techniques, wide and small angle X-ray scattering (WAXS/SAXS) were used to obtain multi-scale quantitative information about the structure and deformation response of human enamel to in situ uniaxial compressive loading. The apparent modulus was determined linking the external load and the internal strain in hydroxyapatite (HAp) crystallites. An improved multi-scale Eshelby model is proposed taking into account the two-level hierarchical structure of enamel. This framework has been used to analyse the experimental data for the elastic lattice strain evolution within the HAp crystals. The achieved agreement between the model prediction and experiment along the loading direction validates the model and suggests that the new multi-scale approach reasonably captures the structure-property relationship for the human enamel. The ability of the model to predict multi-directional strain components is also evaluated by comparison with the measurements. The results are useful for understanding the intricate relationship between the hierarchical structure and the mechanical properties of enamel, and for making predictions of the effect of structural alterations that may occur due to the disease or treatment on the performance of dental tissues and their artificial replacements., (Copyright © 2013 Elsevier Inc. All rights reserved.)

Human dentine is a hierarchical mineralized tissue with a two-level composite structure, with tubules being the prominent structural feature at a microlevel, and collagen fibres decorated with hydroxyapatite (HAp) crystallite platelets dominating the nanoscale. Few studies have focused on this two-level structure of human dentine, where the response to mechanical loading is thought to be affected not only by the tubule volume fraction at the microscale, but also by the shape and orientation distribution of mineral crystallites, and their nanoscale spatial arrangement and alignment. In this paper, in situ elastic strain evolution within HAp in dentine subjected to uniaxial compressive loading along both longitudinal and transverse directions was characterized simultaneously by two synchrotron X-ray scattering techniques: small- and wide-angle X-ray scattering (SAXS and WAXS, respectively). WAXS allows the evaluation of the apparent modulus linking the external load to the internal HAp crystallite strain, while the nanoscale HAp distribution and arrangement can be quantified by SAXS. We proposed an improved multiscale Eshelby inclusion model that takes into account the two-level hierarchical structure, and validated it with a multidirectional experimental strain evaluation. The agreement between the simulation and measurement indicates that the multiscale hierarchical model developed here accurately reflects the structural arrangement and mechanical response of human dentine. This study benefits the comprehensive understanding of the mechanical behaviour of hierarchical biomaterials. The knowledge of the mechanical properties related to the hierarchical structure is essential for the understanding and predicting the effects of structural alterations that may occur due to disease or treatment on the performance of dental tissues and their artificial replacements., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

While the phenomenon of birefringence is well-established in the case of visible radiation and is exploited in many fields (e.g., through the use of the polarizing optical microscope), the analogous phenomenon for X-rays has been a virtually neglected topic. Here, we demonstrate the scope and potential for exploiting X-ray birefringence to determine the orientational properties of specific types of bonds in solids. Specifically, orientational characteristics of C-Br bonds in the bromocyclohexane/thiourea inclusion compound are elucidated from X-ray birefringence measurements at energies close to the bromine K-edge, revealing inter alia the changes in the orientational distribution of the C-Br bonds associated with a low-temperature order-disorder phase transition. From fitting a theoretical model to the experimental data, reliable quantitative information on the orientational properties of the C-Br bonds is determined. The experimental strategy reported here represents the basis of a new approach for gaining insights into the orientational properties of molecules in anisotropic materials.

In this paper the first practical application of kinoform lenses for the X-ray reflectivity characterization of thin layered materials is demonstrated. The focused X-ray beam generated from a kinoform lens, a line of nominal size approximately 50 microm x 2 microm, provides a unique possibility to measure the X-ray reflectivities of thin layered materials in sample scanning mode. Moreover, the small footprint of the X-ray beam, generated on the sample surface at grazing incidence angles, enables one to measure the absolute X-ray reflectivities. This approach has been tested by analyzing a few thin multilayer structures. The advantages achieved over the conventional X-ray reflectivity technique are discussed and demonstrated by measurements.

The unprecedented brilliance achieved by third-generation synchrotron sources and the availability of improved optics have opened up new opportunities for the study of materials at the micrometre and nanometre scale. Focusing the synchrotron radiation to smaller and smaller beams is having a huge impact on a wide research area at synchrotrons. The key to the exploitation of the improved sources is the development of novel optics that deliver narrow beams without loss of brilliance and coherence. Several types of synchrotron focusing optics are successfully fabricated using advanced miniaturization techniques. Kinoform refractive lenses are being developed for hard X-ray beamlines, and the first test results at Diamond are discussed in this paper.

Elasticity of titin is a key parameter that determines the mechanical properties of muscle. These include reversibility, i.e., the muscle's capacity to change its length many-fold and return to its original state, and the transduction of passive tension generated by the stretched muscle. The morphology and elastic properties of oriented fibres of titin molecules were studied using SAXS and WAXS (small- and wide-angle X-ray scattering, respectively) and mechanical techniques. We succeeded in obtaining oriented filaments of purified titin suitable for diffraction measurements. Our X-ray data suggest a model of titin as a nanoscale, morphological, and aperiodical array of rigid Ig- and Fn3-type domains covalently connected by conformationally variable short loops. The line group symmetry of the model can be defined as SM with axial translation tau(infinity). Both tension transduction and high elasticity of titin can be explained in terms of crystalline polymer physics. Titin stretching experiments show that each individual titin macromolecule can adopt a novel two-phase state within the fibre. Conversion between high elasticity and strength can be explained as a phase transition under external tension. In the terms of the concept of orientational melting the origin of the functional heterogeneity along the titin strand becomes interpretable.

We report the observation of a new type of columnar liquid crystal phase, which is formed by thin hard colloidal disks in a dense suspension. High-resolution small-angle x-ray diffraction reveals a combination of long-range bond-orientational order and short-range translational order between the columns, the hallmark of the hexatic phase. Our results imply that geometric frustration related to the size polydispersity of the particles destroys long-range translational order and therefore promotes the formation of this novel phase.

Scanning force microscopy on monomolecular films of eicosylperfluorotetradecane, F(CF(2))(14)(CH(2))(20)H, on mica, silicon oxide, or water revealed spontaneous organization to well-defined nanoscopic ribbon and spiral or toroidal superstructures. Whether ribbons or nanospirals were formed depended on the solvent from which the molecular monofilm was cast. Ribbons were observed when a hydrocarbon or a perfluorocarbon solvent was used, e.g., decalin or perfluorodecalin. When the compound, however, was deposited from nonselective hexafluoroxylene, the molecules assembled into spirals of defined size. The spirals/toroids transformed to ribbons when exposed either to decalin or perfluorodecalin vapor, and the ribbons transformed to toroids when exposed to hexafluoroxylene vapor. These changes could be observed in situ. Scanning force microscopy yielded an identical height and width for the bands forming the spirals and for the parallel flat ribbons. X-ray reflectivity yielded a height of 3.61 +/- 0.05 nm, again identical for both morphologies. Yet, the length of the extended F(CF(2))(14)(CH(2))(20)H molecule, i.e., 4.65 nm, exceeds the layer thickness obtained from X-ray reflectometry. It is, however, consistent with an arrangement where the fluorinated chains are oriented normal to the surface layer and where the alkyl segments are tilted with a 122 degrees angle between the two segments. Within the plane defined by the tilt, this angle allows a dense packing of the alkyl segments compensating for the larger cross-section of the fluorocarbon segment. The tilt plane defines an "easy" direction along which the monolayer structure can preserve order. In the plane perpendicular to this axis, long-range ordered dense packing of the alkyl chains is not possible. Incommensurable packing can in principle explain the finite and regular width of the ribbons and the stepwise turn in the spirals.

Cholesterol (CHOL), free fatty acids (FFA) and nine classes of ceramides (CER1-CER9) form the main constituents of the intercellular lipid lamellae in stratum corneum (SC), which regulate the skin barrier function. Both the presence of a unique 13-nm lamellar phase, of which the formation depends on the presence of CER1, and its dense lateral packing are characteristic for the SC lipid organisation. The present study focuses on the lipid organisation in mixtures prepared with CHOL, FFA and a limited number of synthetic CER, namely CER1, CER3 and bovine brain CER type IV (SigmaCERIV). The main objective is to determine the optimal molar ratio of CER3 to SigmaCERIV for the formation of the 13-nm lamellar phase. CER3 contains a uniform acyl chain length, whereas SigmaCERIV contains fatty acids with varying chain lengths. Using small angle X-ray diffraction (SAXD), it is demonstrated that the CER3 to SigmaCERIV ratio affects the formation of the 13-nm lamellar phase and that the optimal ratio depends on the presence of FFA. Furthermore, the formation of the 13-nm lamellar phase is not very sensitive to variations in the total CER level, which is similar to the in vivo situation.

Lipid lamellae present in the outermost layer of the skin protect the body from uncontrolled water loss. In human stratum corneum (SC), two crystalline lamellar phases are present, which contain mostly cholesterol, free fatty acids, and nine types of free ceramides. Previous studies have demonstrated that the SC lipid organization can be mimicked with model mixtures based on isolated SC lipids. However, those studies are hampered by low availability and high interindividual variability of the native tissue. To elucidate the role of each lipid class in the formation of a competent skin barrier, the use of synthetic lipids would offer an alternative. The small- and wide-angle X-ray diffraction results of the present study show for the first time that synthetic lipid mixtures, containing only three synthetic ceramides, reflect to a high extent the SC lipid organization. Both an appropriately chosen preparation method and lipid composition promote the formation of two characteristic lamellar phases with repeat distances similar to those found in native SC. From all synthetic lipid mixtures examined, equimolar mixtures of cholesterol, ceramides, and free fatty acids equilibrated at 80 degrees C resemble to the highest extent the lamellar and lateral SC lipid organization, both at room and increased temperatures.

High-resolution synchrotron small-angle x-ray diffraction is applied to characterize the structure and long-range order in a sedimentary hard-sphere colloidal crystal before and during its drying. The principles of the technique and the influence of the coherence properties of the x-ray beam are discussed in detail. The capillary forces generated during the drying process are shown to destroy the long-range order and to break the crystal into smaller crystallites with slightly different orientations. The diffraction is shown to switch from the dynamic regime in the long-range-ordered crystal to nearly kinematic diffraction in the mosaic (short-range-ordered) crystal.

We report combined x-ray photon correlation spectroscopy (XPCS) and neutron spin echo (NSE) measurements of the layer-displacement fluctuations in smectic liquid-crystal membranes in the range from 10 ns to 10 micros. NSE reveals a new regime, determined by bulk elasticity, in which relaxation times decrease with the wave vector of the fluctuations. XPCS probes slower surface-tension-dominated relaxation times, independent of the wave vector. XPCS gives a difference in correlation times at specular and off-specular positions that can be related to different detection schemes.

The lipid lamellae present in the outermost layer of the skin, the stratum corneum (SC), form the main barrier for diffusion of molecules across the skin. The main lipid classes in SC are cholesterol (CHOL), free fatty acids (FFA) and at least nine classes of ceramides (CER), referred to as CER1 to CER9. In the present study the phase behaviour of four synthetic CER, either single or mixed with CHOL or CHOL and FFA, has been studied using small and wide angle X-ray diffraction. The lipid mixtures showed complex phase behaviour with coexistence of several phases. The results further revealed that the presence of synthetic CER1 as well as a proper composition of the other CER in the mixture were crucial for the formation of a phase with a long periodicity, characteristic for SC lipid phase behaviour. Only a mixture containing synthetic CER1 and CER3, CHOL and FFA showed similar phase behaviour to that of SC.

The structure of the lipoplex formed from DNA and the sugar-based cationic gemini surfactant 1, which exhibits excellent transfection efficiency, has been investigated in the pH range 8.8-3.0 utilizing small-angle X-ray scattering (SAXS) and cryo-electron microscopy (cryo-TEM). Uniquely, three well-defined morphologies of the lipoplex were observed upon gradual acidification: a lamellar phase, a condensed lamellar phase, and an inverted hexagonal (H(II)) columnar phase. Using molecular modeling, we link the observed lipoplex morphologies and physical behavior to specific structural features in the individual surfactant, illuminating key factors in future surfactant design, viz., a spacer of six methylene groups, the presence of two nitrogens that can be protonated in the physiological pH range, two unsaturated alkyl tails, and hydrophilic sugar headgroups. Assuming that the mechanism of transfection by synthetic cationic surfactants involves endocytosis, we contend that the efficacy of gemini surfactant 1 as a gene delivery vehicle can be explained by the unprecedented observation of a pH-induced formation of the inverted hexagonal phase of the lipoplex in the endosomal pH range. This change in morphology leads to destabilization of the endosome through fusion of the lipoplex with the endosomal wall, resulting in release of DNA into the cytoplasm.

Synchrotron small-angle x-ray diffraction images of random-stacking-induced Bragg scattering rods are obtained in a wide range of wave vectors from a single colloidal crystal. The results reveal a strong multiple scattering effect, which leads to new features in the diffraction pattern-secondary Bragg rods. We argue that dynamic x-ray diffraction is rather common for high-quality colloidal photonic crystals and should be taken into account.

In-situ observations of crystallisation in minerals and organic polymers have been made by simultaneous, time-resolved small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) techniques. In isotactic polypropylene slow quiescent crystallisation shows the onset of large scale ordering prior to crystal growth. Rapid crystallisations studied by melt extrusion indicate the development of well resolved oriented SAXS patterns associated with long range order before the development of crystalline peaks in the WAXS region. Block copolymers self-assemble into mesophases in polymer melts above a critical chain length (or above a critical temperature) and this self-assembly process is shown to be susceptible to an incipient crystallisation. Mesophase formation is observed at anomalously high temperatures in ethylene-oxide containing block copolymers below the normal melting point of the polyoxy ethylene chains. Formation of calcium carbonate from aqueous solutions of sodium carbonate and calcium nitrate is observed to be a two-stage process and precipitation proceeds by the production of an amorphous metastable phase. This phase grows until it is volume filling and leads to the formation of the two polymorphs Calcite and Vaterite. These three sets of results suggest pre-nucleation density fluctuations, leading to a metastable phase, play an integral role in all three classes of crystallisation. In due course, this phase undergoes transformation to "normal" crystals.

The long-range order parameters in single crystals of hard colloidal spheres grown in sediments of colloid-polymer mixtures are determined using synchrotron small-angle x-ray diffraction with a resolution of 10(-6) of the wave vector. The interplanar positional order derived from the width of lattice reflections extends over at least 500 lattice planes. The lattice planes are orientationally correlated within approximately 0.1 degrees throughout the crystals, whereas the stacking of hexagonal planes remains random.

The dynamics of the layer-displacement fluctuations in smectic membranes have been studied by x-ray photon correlation spectroscopy (XPCS). We report transitions from an oscillatory damping regime to simple exponential decay of the fluctuations, both as a function of membrane thickness and upon changing from specular to off-specular scattering. This behavior is in agreement with recent theories. Employing avalanche photodiode detectors and the uniform filling mode of the synchrotron storage ring, the fast limits of XPCS have been explored down to 50 ns.

Static and dynamic x-ray scattering has been used to characterize thermal fluctuations in free-standing smectic films in the crystalline-B phase. The results are remarkably similar to those in smectic-A films, in spite of the three-dimensional positional order in the crystalline-B phase. The main difference is the disappearance of the characteristic Landau-Peierls instability of the smectic-A phase. The dynamic nature of the fluctuations is explicitly demonstrated by x-ray photon correlation spectroscopy. This fluctuation behavior of crystalline-B films can be attributed to the small value of the shear elastic constant C44.

Coherent dynamic x-ray scattering has been used to study the thermally excited layer fluctuations in freely suspended smectic films of the compound 4O.8. Using 8-keV x rays and films with a thickness around 0.3 &mgr;m we resolve relaxation times down to a few &mgr;s. A combination of damped and oscillatory behavior is observed for the layer undulations, which can be attributed to inertial effects. These are due to the surface contribution to the free energy which cannot be disregarded for thin films.

Background: Tracer studies are an important tool to obtain information about the processes involved in the immunological response. Colloidal gold is widely used as a tracer, but its small size of label can cause some difficulty during low-resolution analysis. To overcome this difficulty, we developed a new method to follow the route of tracer movement within lymph nodes., Methods: We applied conventional X-ray analysis, X-ray fluorescence analysis (XFA) subtractional microscopy using synchrotron radiation (SR) beams, light microscopy, and ultrastructural analysis to study the distribution and quantity of colloidal gold coupled with albumin within rat parasternal lymph node 2, 4, 6, 8, and 10 h after intrapleural injection of the tracer., Results: At all the time points XFA-SR revealed that tracer formed a circle with a maximum concentration in the node periphery. XFA-SR measured colloidal gold concentration in the nodes reached its maximum (0.5-0.75 weight %) in 6-8 h. Subtractional microscopy revealed superficially located groups of cells filled with colloidal gold tracer. Light microscopy and ultrastructural analysis confirmed that the tracer was concentrated in the reticular cells, situated in the sinuses of the node. Sinusoidal reticular cells concentrated tracer at much higher rates than sinusoidal macrophages. Four hours after injection, gold appeared in the lysosomes of the follicular reticular cells. At the same time point, evidence of antigen presentation was obtained. Antigen presentation proved to be an extremely rara event since only one ultrastructural incident was found in 150 analysed grids., Conclusions: SR is a valuable tool for the analysis of gold tracer passage within the living organism.