Search

In order to improve the delivery of topical corticosteroids into inflammatory skin lesions while reducing the likelihood of adverse effects, lipid nanocarriers have received increasing attention. Hence, this study aimed to develop biocompatible nanoemulsions (NEs) and nanostructured lipid carriers (NLCs) as carriers for fluocinolone acetonide (FA) by carefully optimizing the formulation and process parameters. After an analysis of the relevant physicochemical parameters and stability testing, in vitro release and permeation tests were performed to evaluate whether the nanocarriers affected the penetration of FA into/through the skin compared to a conventional reference product (Sinoderm® cream). The developed NEs exhibited satisfactory physicochemical properties (droplet size |-30| mV, pH ~ 4.75) and long-term stability. Although the developed NLCs initially had satisfactory properties, gelation was observed within 3 months of storage, implying that further formulation testing is required to resolve the limited stability of these systems. In vitro release/permeation findings suggest that the developed nanocarriers (especially NEs) provide better delivery of FA into/though the skin compared to the Sinoderm® cream. Therefore, a lecithin-based NE with a 10% lipid phase (medium-chain triglycerides/oleic acid 3:1) is a promising strategy for improved delivery of FA to the inflamed skin, allowing for ease of application, especially to larger skin surfaces and hairy regions.

Polyelectrolyte complexes (PECs) are attractive carriers with recognized potential to enhance oral delivery of poorly soluble high-dosed low-molecular-weight drugs. The formulation of solid oral dosage forms requires the drying of PECs, which may affect their physicochemical and biopharmaceutical properties. The aim of this study was to investigate the effect of spraydrying on the properties of ibuprofen-loaded chitosan/xanthan gum PECs and to assess the drug release kinetics from such PECs filled into hard capsules in comparison with corresponding PECs which are dried under ambient conditions. The yield, ibuprofen content, entrapment efficiency, and residual moisture content of spray-dried PECs were lower than those of ambient-dried PECs. Better flowability of spray-dried PECs was attributed to the almost spherical particle shape, shown by scanning electron microscopy. DSC and PXRD analysis confirmed the amorphization of ibuprofen during spray-drying. All the investigated PECs, obtained by drying under ambient conditions as well as by spray-drying, had high rehydration capacity both in 0.1 M hydrochloric acid (pH 1.2) and phosphate buffer pH 7.4. In vitro ibuprofen release from dried PECs was controlled during 12 h with the release of approximately 30% of entrapped ibuprofen. Spray-dried PECs provided better control of ibuprofen diffusion from the carrier compared to the ambientdried ones.

Evaluation of pharmacokinetic properties is a significant step at the early stages of drug development. In this study, an in vitro evaluation of the pharmacokinetic properties of five newly synthesized compounds was performed. These compounds belong to N-hydroxyurea and hydroxamic acid derivatives and analogs of NSAIDs indomethacin, flurbiprofen, diclofenac, ibuprofen, and naproxen (compounds 1, 2, 3, 11, and 12, respectively) with dual COX-2 and 5-LOX inhibitory activity. Two in vitro methods (biopartitioning micellar chromatography (BMC) and PAMPA) were used to evaluate passive gastrointestinal absorption, while high-performance affinity chromatography (HPAC) and differential pulse voltammetry (DPV) were used to evaluate binding to human serum albumin (HSA). The introduction of N-hydroxyurea and hydroxamic acid groups into the structure of NSAIDs decreases both expected passive gastrointestinal absorption (BMC k values were from 3.02 to 9.50, while for NSAIDs were from 5.29 to 13.36; PAMPA –logPe values were between 3.81 and 4.76, while for NSAIDs were ≤3.46) and HSA binding (HPAC logk values were from 2.03 to 9.54, while for NSAIDs were ≥11.03; DPV peak potential shifts were between 7 and 34, while for NSAIDs were ≥54). Structural modifications of all tested compounds that increase lipophilicity could be considered to enhance their passive gastrointestinal absorption. Considering lower expected HSA binding and higher lipophilicity of tested compounds compared to corresponding NSAIDs, it can be expected that the volume of distribution of compounds 1, 2, 3, 11, and 12 will be higher. Reduced HSA binding may also decrease interactions with other drugs in comparison to corresponding NSAIDs. All tested compounds showed significant microsomal instability (25.07–58.44% decrease in concentration) in comparison to indomethacin (14.47%) and diclofenac (20.99%). [ABSTRACT FROM AUTHOR]

Drug discovery and development is a very challenging, expensive and time-consuming process. Impressive technological advances in computer sciences and molecular biology have made it possible to use computer-aided drug design (CADD) methods in various stages of the drug discovery and development pipeline. Nowadays, CADD presents an efficacious and indispensable tool, widely used in medicinal chemistry, to lead rational drug design and synthesis of novel compounds. In this article, an overview of commonly used CADD approaches from hit identification to lead optimization was presented. Moreover, different aspects of design of multitarget ligands for neuropsychiatric and anti-inflammatory diseases were summarized. Apparently, designing multi-target directed ligands for treatment of various complex diseases may offer better efficacy, and fewer side effects. Antipsychotics that act through aminergic G protein-coupled receptors (GPCRs), especially Dopamine D2 and serotonin 5-HT2A receptors, are the best option for treatment of various symptoms associated with neuropsychiatric disorders. Furthermore, multi-target directed cyclooxygenase-2 (COX-2) and 5-lipoxygenase (5-LOX) inhibitors are also a successful approach to aid the discovery of new anti-inflammatory drugs with fewer side effects. Overall, employing CADD approaches in the process of rational drug design provides a great opportunity for future development, allowing rapid identification of compounds with the optimal polypharmacological profile.

This paper presents study of losartan potassium stability evaluation by liquid chromatography with UV/VIS and MS-MS detection and its degradation profile. A solution of losartan potassium was exposed to the following stress agents: 0.1 M HCl, 0.1 M NaOH, and 3% (v/v) H2O2. The analyses of losartan potassium solutions were carried out in a gradient elution mode with acetonitrile and 0.1% (v/v) CF3COOH aqueous solution and constant flow rate of 0.5 mL min-1 within 22 min run time. After 7 days of losartan potassium solutions exposure to the stress agents at room temperature, it was found that the degree of degradation in the presence of 0.1 M HCl and 0.1 M NaOH was less than 1%, while in the presence of 3% H2O2 degradation was significantly higher (about 10%). Chemical structure elucidation of the major degradation products of losartan potassium was performed using LC-MS/MS method. The concentration versus time plot indicated that in 3% (v/v) H2O2 solution losartan potassium was degraded according to the pseudo zero-order reaction kinetics with 1.48·10-8 mol L-1 day-1 rate constant.

Bacterial DNA gyrase and topoisomerase IV control the topological state of DNA during replication and represent important antibacterial drug targets. To be successful as drug candidates, newly synthesized compounds must possess optimal lipophilicity, which enables efficient delivery to the site of action. In this study, retention behavior of twenty-three previously synthesized dual DNA gyrase and topoisomerase IV inhibitors was tested in RP-HPLC system, consisting of C8 column and acetonitrile/phosphate buffer (pH 5.5 and pH 7.4) mobile phase. logD was calculated at both pH values and the best correlation with logD was obtained for retention parameter φ0 , indicating that this RP-HPLC system could be used as an alternative to the shake-flask determination of lipophilicity. Subsequent QSRR analysis revealed that intrinsic lipophilicity (logP) and molecular weight (bcutm13) have a positive, while solubility (bcutp3) has a negative influence on this retention parameter. [ABSTRACT FROM AUTHOR]

Acetylsalicylic acid belongs to nonsteroidal anti-inflammatory drugs with antiinflammatory, analgesic and antipyretic properties. The aim of this work was development and validation of HPLC method for qualitative and quantitative analysis of acetylsalicylic acid and its major degradation product, salicylic acid, in dosage forms. The optimal separation was achived using Zorbax Eclipse XDB-C18 Analytical column (4,6x150 mm, particle size 5 μm) thermostated at 35°C. Mobile phase consisted of eluents A and B in ratio 65:35 (V/V). As the eluent A, water of HPLC purity and 85% phosphoric acid in ratio 80:0.5 (V/V) were used, while acetonitrile was used as the eluent B. The flow rate was 1.0 mL/min and UV detection was performed at 240 nm. The method was validated in terms of selectivity, linearity, precision, accuracy and robustness for both analytes, as well as limits of detection and quantification for salicylic acid. The obtained results meet the requirements of analytical procedures validation. The proposed HPLC method was applied in qualitative and quantitative analysis of acetylsalicylic and salicylic acids in six different forms of drugs. All obtained results meet the requirements of manufacturer specifications. The established HPLC method was found to be rapid, simple, accurate and selective for simultaneous determination of acetylsalicylic and salicylic acids in dosage forms.

Acridine ring can be found in molecules used in many different spheres, including industry and medicine. Nowadays, even acridines with antibacterial activity are of research interest due to increasing bacterial resistance. Some acridine derivatives showed antimalarial or antiviral activity. Acridine derivatives were also investigated for antitumor activity due to the interaction with topoisomerase II and DNA base pairs. Considering these possible uses of acridine derivatives, this work was made as overview of all significant structure characteristics for specific action of these compounds.

Two types of biocompatible surfactants were evaluated for their capability to formulate skin-friendly/non-irritant microemulsions as vehicles for two poorly water-soluble model drugs differing in properties and concentrations: alkyl polyglucosides (decyl glucoside and caprylyl/capryl glucoside) and ethoxylated surfactants (glycereth-7-caprylate/ caprate and polysorbate 80). Phase behavior, structural inversion and microemulsion solubilization potential for sertaconazole nitrate and adapalene were found to be highly dependent on the surfactants structure and HLB value. Performed characterization (polarized light microscopy, pH, electrical conductivity, rheological, FTIR and DSC measurements) indicated a formulation containing glycereth- 7-caprylate/caprate as suitable for incorporation of both drugs, whereas alkyl polyglucoside-based systems did not exhibit satisfying solubilization capacity for sertaconazole nitrate. Further, monitored parameters were strongly affected by sertaconazole nitrate incorporation, while they remained almost unchanged in adapalene-loaded vehicles. In addition, results of the in vivo skin performance study supported acceptable tolerability for all investigated formulations, suggesting selected microemulsions as promising carriers worth exploring further for effective skin delivery of model drugs.

The objective of this study was to synthesize seven novel thiourea derivatives of naproxen (8–14), examine the anti-inflammatory activity of the newly synthesized compounds, investigate the cytotoxic potential of both sets of synthesized compounds (1–7 and 8–14), and select the most promising anti-inflammatory and antitumor drug candidates. The results of the in vivo anti-inflammatory study clearly showed that compounds 8 and 9 were capable of decreasing paw edema, as evident from a high percentage of inhibition (44.83% and 49.29%, respectively). In addition, the results of in vitro enzyme inhibition assays demonstrated that neither of the newly synthesized compounds reached 50% inhibition of 5-LOX at concentrations lower than 100 µM. In terms of antitumor potential, derivatives 3 and 8 exhibited strong cytotoxic effects on the HeLa cell line, suggesting the involvement of the extrinsic pathway of apoptosis. According to the overall results obtained for both sets of synthesized molecules, derivatives 4 and 8 can be underlined as molecules with the strongest anti-inflammatory activity, while derivatives 3 and 8 are the most promising cytotoxic agents. [ABSTRACT FROM AUTHOR]

Development and validation of a liquid chromatography - tandem mass spectrometry (LC-MS/MS) method for the determination of adapalene in pharmaceutical forms for skin application were presented. The MS/MS analysis of adapalene was performed by use of three mobile phases, consisted of acetonitrile and (a) 0.1 % formic acid, (b) 0.1 % trifluoroacetic acid and (c) 20 mM ammonium acetate. The strongest signals of parent ion and dominant product ion were obtained in negative mode by use of the mobile phase (c). Validation of this method was performed according to the ICH guidelines. Small variations of selected chromatographic parameters (concentration of ammonium acetate, mobile phase composition, column temperature and flow rate) did not affect qualitative and quantitative system responses significantly, which proved method’s robustness. The method is specific for the determination of adapalene. Linearity was proved in the concentration range 6.7 - 700.0 ng mL-1 (r = 0.9990), with limits of detection and quantification 2.0 ng mL-1 and 6.7 ng mL-1, respectively. Accuracy was confirmed by calculated recoveries (98.4 % - 101.5 %). Precision was tested at three levels: injection repeatability, analysis repeatability and intermediate precision. Calculated relative standard deviations were less than 1, 2 and 3 %, respectively. [Projekat Ministartsva nauke Republike Srbije, br. OI172041 i br. TR34031]

Cortienic acid was obtained by periodic acid oxidation of fluocinolone acetonide, whereas corresponding amide was synthesized from the cortienic acid and ethyl ester of b-alanine by dicyclohexylcarbodiimide - hydroxybenzotriazole coupling procedure. Lipophilicity of the amide was evaluated by using reversed-phase thin-layer chromatography systems, consisting of ethanol and water in various ratios, and was higher in comparison to fluocinolone acetonide and cortienic acid.