Search

This paper describes the development and application of new metal-tagging reagents and a novel mass spectrometer (MS) detector for a flow cytometer that enables highly multiplexed measurement of many biomarkers in individual cells. A new class of tagging reagents, based on an acrylic polymer backbone that incorporates a reproducible number of lanthanide elements, has been developed. When linked to antibodies that specifically recognize target proteins of interest, determination of the tag elements is diagnostic for the presence and quantification of the antigen. The use of enriched stable isotope tags provides the opportunity for multiparametric assay. The new instrument uses inductively coupled plasma (ICP) to vaporize, atomize, and ionize individual cells that have been probed using the metal-labeled antibodies. The elemental composition, specifically of the metal tags, is recorded simultaneously using a time-of-flight (TOF)-MS that has been specifically designed for high-speed analysis during the short transient corresponding to the individual cell event. The detector provides for well-resolved atomic fingerprints of many elemental and isotopic tags, with little overlap of neighboring signals (high abundance sensitivity) and wide dynamic range both for a single antigen and between antigens.

Recent progress in the development of massively multiplexed bioanalytical assays using element tags with inductively coupled plasma mass spectrometry detection is reviewed. Feasibility results using commercially available secondary immunolabeling reagents for leukemic cell lines are presented. Multiplex analysis of higher order is shown with first generation tag reagents based on functionalized carriers that bind lanthanide ions. DNA quantification using metallointercalation allows for cell enumeration or mitotic state differentiation. In situ hybridization permits the determination of cellular RNA. The results provide a feasibility basis for the development of a multivariate assay tool for individual cell analysis based on inductively coupled plasma mass spectrometry in a cytometer configuration.

Ion–molecule reactions that can be used for resolution of spectral overlaps of long-lived or stable (T1/2 > 100 years) atomic isobars on the long-lived radio-isotopes (100

There is a great need in cell biology for the simultaneous detection of many intracellular and extracellular proteins within single cells. Current optical methods based on fluorescence activated flow cytometry are difficult to multiplex. We have developed a novel application of ICP-MS-linked metal-tagged immunophenotyping which has great potential for highly multiplexed proteomic analysis. Expression of intracellular oncogenic kinase BCR/Abl, myeloid cell surface antigen CD33, human stem cell factor receptor c-Kit and integrin receptor VLA-4 were investigated using model human leukemia cell lines. Antigens to which specific antibodies are available and are distinguishably tagged can be determined simultaneously, or multiplexed. Four commercially available tags (Au, Sm, Eu, and Tb) conjugated to secondary antibodies enable a 4-plex assay assuming that the primary antibodies are not cross-reactive. Results obtained by ICP-MS were compared with data from FACS. ICP-MS as an analytical detector possesses several advantages that enhance the performance of immunoassays, which are discussed in detail. Although multiplexing using metal-conjugated reagents is in a very early stage of research and feasibility studies, it is already apparent that more than four antigens could be accurately detected simultaneously using the ICP-MS instrument.

This paper reviews the literature published to September 2001 relating to the history, design, operation and application of linear radio-frequency (r.f.)-driven multipole collision cells and reaction cells in combination with inductively coupled plasma mass spectrometry. The available material is supplemented with original experimental data that demonstrates the principles presented. The relation of these devices to collision cells for organic mass spectrometry and to the three-dimensional ion trap is discussed in its historical context. A general tutorial on the fundamentals of ion collision and reaction, including thermochemistry, energy transfer and reaction kinetics, is given. Consideration is given to some of the fundamental aspects of operation and design of linear r.f. devices. This historical and fundamental framework then allows the tutorial to focus on the promotion and control of ion–molecule chemistry in linear r.f.-multipole cells for elemental analysis. Vacuum requirements are considered in some detail, and deal in particular with the issue of contamination of the reaction gas. Special attention is paid to the thermal characteristics of the ions in the cell, as this has important implications for the application of the available databases of thermochemical and thermal kinetic data to the development of analytical methods. Calculation and experimental validation of the efficiency of the ion–molecule chemistry leads to the recognition that secondary, sequential chemistry can play a limiting role in the realization of the potential of the cell method. The two principal means of controlling the analytical impact of the secondary chemistry, through post-cell kinetic energy discrimination and through in-cell mass-bandpassing are discussed and contrasted through spectral data acquired for different reaction gas types and pressures. The available literature on the application of collision cells and reaction cells for the analysis of samples of high purity, environmental, geological and biological materials is critically reviewed.

Collisional damping of ion density fluctuations of an ion beam extracted from an ICP in a linear rf quadrupole cell [dynamic reaction cell (DRC)] is studied. Target gas pressure, parameter q, entrance and exit lens potentials and DRC rod offset were optimized to broaden the 107Ag+ ion packets of 0.2 ms duration to 2–4 ms (FWHM). It is shown that operating the DRC under such optimized conditions reduces the RSD of isotope ratio measurements obtained with a downstream quadrupole mass analyzer to the theoretical limit defined by the counting statistics error. For Ag and Pb samples at 40 ng ml−1, measured with the cell pressurized by Ne, isotope ratio RSDs of 0.02–0.03% at a counting statistics error of 0.01–0.02% are shown. All 4 isotopes of Pb were measured in the same acquisition. For NIST 982 Isotope Standard at a concentration of 10 ng ml-1, 204Pb/206Pb, 207Pb/206Pb and 208Pb/206Pb isotope ratios were determined with an external precision (n = 7) of 0.056–0.117%, 0.022–0.034% and 0.014–0.028% RSD, and with an average inaccuracy of 340 ppm, 781 ppm and 180 ppm, respectively. NIST 981 at 10 ng ml−1 was used as an external standard. Reactive elimination of isobaric interferences in the DRC is shown to allow precise isotope ratio measurement of normally interfered isotopes of Fe by a quadrupole ICP-MS. ArN+ and ArO+ interferences on Fe+ were removed by ion–molecule reactions with NH3. Collisional damping of the ion beam fluctuations was sustained and internal precision is shown to be limited only by counting statistics. For Fe at 50 ng ml−1, the average internal precision for 19 samples (9 replicates per sample) of 54Fe/56Fe and 57Fe/56Fe ratios was 0.068% and 0.1% RSD, with a corresponding average counting statistics error of 0.053% and 0.082% and external precision of 0.055% and 0.056% RSD, respectively.

We present the synthesis and characterization of monodisperse, sub-micron poly(styrene) (PS) particles loaded with up to and including 10(7) lanthanide (Ln) ions per particle. These particles have been synthesized by seeded emulsion polymerization with a mixture of monomer and a pre-formed Ln complex, and analyzed on a particle-by-particle basis by a unique inductively coupled plasma mass cytometer. Seed particles were prepared by surfactant-free emulsion polymerization (SFEP) to obtain large particle sizes in aqueous media. Extensive surface acid functionality was introduced using the acid-functional initiator ACVA, either during seed latex synthesis or in the second stage of polymerization. The loading of particles with three different Ln ions (Eu, Tb, and Ho) has proven to be close to 100 % efficient on an individual and combined basis. Covalent attachment of metal-tagged peptides and proteins such as Neutravidin to the particle surface was shown to be successful and the number of bound species can be readily determined. We believe these particles can serve as precursors for multiplexed, bead-based bio-assays utilizing mass cytometric detection.

This review paper describes a new technology, mass cytometry, that addresses applications typically run by flow cytometer analyzers, but extends the capability to highly multiparametric analysis. The detection technology is based on atomic mass spectrometry. It offers quantitation, specificity and dynamic range of mass spectrometry in a format that is familiar to flow cytometry practitioners. The mass cytometer does not require compensation, allowing the application of statistical techniques; this has been impossible given the constraints of fluorescence noise with traditional cytometry instruments. Instead of "colors" the mass cytometer "reads" the stable isotope tags attached to antibodies using metal-chelating labeling reagents. Because there are many available stable isotopes, and the mass spectrometer provides exquisite resolution between detection channels, many parameters can be measured as easily as one. For example, in a single tube the technique allows for the ready detection and characterization of the major cell subsets in blood or bone marrow. Here we describe mass cytometric immunophenotyping of human leukemia cell lines and leukemia patient samples, differential cell analysis of normal peripheral and umbilical cord blood; intracellular protein identification and metal-encoded bead arrays.

Advances in the development of highly multiplexed bio-analytical assays with inductively coupled plasma mass spectrometry (ICP-MS) detection are discussed. Use of novel reagents specifically designed for immunological methods utilizing elemental analysis is presented. The major steps of method development, including selection of elements for tags, validation of tagged reagents, and examples of multiplexed assays, are considered in detail. The paper further describes experimental protocols for elemental tagging of antibodies, immunostaining of live and fixed human leukemia cells, and preparation of samples for ICP-MS analysis. Quantitative analysis of surface antigens on model cell lines using a cocktail of seven lanthanide labeled antibodies demonstrated high specificity and concordance with conventional immunophenotyping.

The enumeration of absolute cell numbers and cell proliferation in clinical samples is important for diagnostic and research purposes. Detection of cellular DNA with fluorescent dyes is the most commonly used approach for cell enumeration in cytometry. Inductively coupled plasma mass spectrometry (ICPMS) has been recently introduced to the field of protein and cell surface antigen identification via ICPMS-linked immunoassays using element-labeled affinity reagents such as gold and lanthanide-conjugated antibodies. In the present work, we describe novel methods for using metallointercalators that irreversibly bind DNA and low concentrations of rare earth metals added to cell growth media for rapid and sensitive measurement of cell numbers by mass spectrometry. We show that Ir- and Rh-containing metallointercalators are useful reagents for labeling cells and normalizing signals when studying antigen expression on different types and numbers of cells. Results are presented for solution analysis performed by conventional ICPMS and compared to measurements obtained on the novel flow cytometer mass spectrometer (FC-MS) instrument, designed to analyze multiple antigens and DNA simultaneously in single cells.

A novel reaction cell for ICP-MS with an electric field provided inside the quadrupole along its axis is described. The field is implemented via a DC bias applied to additional auxiliary electrodes inserted between the rods of the quadrupole. The field reduces the settling time of the pressurized quadrupole when its mass bandpass is dynamically tuned. It also improves the transmission of analyte ions. It is shown that for the pressurized cell with the field activated, the recovery time for a change in quadrupole operating parameters is reduced to 610 times, respectively. The use of a retarding axial field for in-situ energy discrimination against cluster and polyatomic ions is shown. When the cell is pressurized with O2 for suppression of 129Xe+, the formation of 127IH 2 + by reactions with gas impurities limits the detection of 129I to isotopic abundance of ∼10−6. In-cell energy discrimination against 127IH 2 + utilizing a retarding axial field is shown to reduce the abundance of the background at m/z = 129 to ca. 3 × 10+ of the 127I+ signal. In-cell energy discrimination against 127IH 2 + is shown to cause less I+ loss than a post-cell potential energy barrier for the same degree of 127IH 2 + suppression.

A method of detection of ultratrace phosphorus and sulfur that uses reaction with O2 in a dynamic reaction cell (DRC) to oxidize S+ and P+ to allow their detection as SO+ and PO+ is described. The method reduces the effect of polyatomic isobaric interferences at m/z = 31 and 32 by detecting P+ and S+ as the product oxide ions that are less interfered. Use of an axial field in the DRC improves transmission of the product oxide ions 4-6 times. With no axial field, detection limits (3sigma, 5-s integration) of 0.20 and 0.52 ng/mL, with background equivalent concentrations of 0.53 and 4.8 ng/mL, respectively, are achieved. At an optimum axial field potential (200 V), the detection limits are 0.06 ng/mL for P and 0.2 ng/mL for S, respectively. The method is used for determining the degree of phosphorylation of beta-casein, and regular and dephosphorylated alpha-caseins at 10-1000 fmol/microL concentration, with 5-10% v/v organic sample matrix (acetonitrile, formic acid, ammonium bicarbonate). The measured degree of phosphorylation for beta-casein (4.9 phosphorus atoms/molecule) and regular alpha-casein (8.8 phoshorus atoms/molecule) are in good agreement with the structural data for the proteins. The P/S ratio for regular alpha-casein (1.58) is in good agreement with the ratio of the number of phosphorylation sites to the number of sulfur-containing amino acid residues cysteine and methionine. The P/S ratio for commercially available dephosphorylated alpha-casein is measured at 0.41 (approximately 26% residual phosphate).

We describe the synthesis and characterization of metal-encoded polystyrene microspheres by multiple-stage dispersion polymerization with diameters on the order of 2 mum and a very narrow size distribution. Different lanthanides were loaded into these microspheres through the addition of a mixture of lanthanide salts (LnCl(3)) and excess acrylic acid (AA) or acetoacetylethyl methacrylate (AAEM) dissolved in ethanol to the reaction after about 10% conversion of styrene, that is, well after the particle nucleation stage was complete. Individual microspheres contain ca. 10(6)-10(8) chelated lanthanide ions, of either a single element or a mixture of elements. These microspheres were characterized one-by-one utilizing a novel mass cytometer with an inductively coupled plasma (ICP) ionization source and time-of-flight (TOF) mass spectrometry detection. Microspheres containing a range of different metals at different levels of concentration were synthesized to meet the requirements of binary encoding and enumeration encoding protocols. With four different metals at five levels of concentration, we could achieve a variability of 624, and the strategy we report should allow one to obtain much larger variability. To demonstrate the usefulness of element-encoded beads for highly multiplexed immunoassays, we carried out a proof-of-principle model bioassay involving conjugation of mouse IgG to the surface of La and Tm containing particles and its detection by an antimouse IgG bearing a metal-chelating polymer with Pr.

We examine the suitability of metal-containing polystyrene beads for the calibration of a mass cytometer instrument, a single particle analyser based on an inductively coupled plasma ion source and a time of flight mass spectrometer. These metal-containing beads are also verified for their use as internal standards for this instrument. These beads were synthesized by multiple-stage dispersion polymerization with acrylic acid as a comonomer. Acrylic acid acts as a ligand to anchor the metal ions within the interior of the beads. Mass cytometry enabled the bead-by-bead measurement of the metal-content and determination of the metal-content distribution. Beads synthesized by dispersion polymerization that involved three stages were shown to have narrower bead-to-bead variation in their lanthanide content than beads synthesized by 2-stage dispersion polymerization. The beads exhibited insignificant release of their lanthanide content to aqueous solutions of different pHs over a period of six months. When mixed with KG1a or U937 cell lines, metal-containing polymer beads were shown not to affect the mass cytometry response to the metal content of element-tagged antibodies specifically attached to these cells.