Search

Gastric and colorectal cancer models are essential for the advancement of precision medicine discovery and development. 2D attached monolayer, spheroid and organoid approaches have all been used in the formation of biobanks containing primary patient-derived cells. Here, we report an assessment of those procedures for a panel of nine patient-derived adenocarcinoma samples, along with the most applicable method for the bio-banking of these cell types. A live cell biobank of tumour specimens would facilitate drug discovery laboratories to evaluate drugs on the population of cell cultures, prior to the clinical phase.

Alternating current (AC) electrolysis is receiving increased interest as a versatile tool for mild and selective electrochemical transformations. In this work, we demonstrate that AC can enable the concept of a stirring-free electrochemical reactor where the periodic switch of electrode polarity, inherent to AC, provides uniform electrolysis across the whole volume of the reactor. Such design implies a straightforward approach for scaling up electrosynthesis. This was demonstrated on the range of electrochemical transformations performed in three different RVC-packed reactors on up to a 50-mmol scale. Redox-neutral, oxidative, and reductive processes were successfully implemented using the suggested design and the applicable frequency ranges were further investigated for different types of reactions. The advantages of the AC-enabled design - such as the absence of stirring and a maximized surface area of the electrodes - provide the possibility for its universal application both for small-scale screening experimentation and large-scale preparative electrosynthesis without significant optimization needed in between.

The reaction of trimethyl(trifluoromethyl)silane-tetrabutylammonium difluorotriphenylsilicate (CF

An efficient synthesis (up to a 200 g scale) of 3-hydroxypyrrolidin-2-ones bearing alkyl substituents or functional groups at the C-5 position is described. The reaction sequence started from 1,3-dipolar cycloaddition of in situ generated nitrile oxides with (meth-)acrylates into 3-substituted isoxazoline-5-carboxylates. The catalytic hydrogenolysis of the isoxazoline N-O bond was optimal upon using H2 (1 atm) at rt, with the following order of the catalyst activity: Pd-C > Pd(OH)2-C > Pt-C. The reactions with Pt-C were more selective for the synthesis of pyrrolidones, while Pd-C provided the fastest conversion rates. The stirring efficiency had a positive impact on conversion rather than elevated temperatures (up to 40 °C) or pressure (up to 50 atm). The diastereoselectivity was governed mainly by steric factors, with a dr of 1:1 to 3:1 (cis- and trans-isomers could be separated). Higher homologues (isoxazolinylacetates and -propanoates) were suitable for the synthesis of 6- or 7-substituted 4-hydroxypiperidones and 5-hydroxyazepanones, respectively. The proposed methods are tolerant to functional groups, including CF3 (but not CHF2 or CH2Cl), ester, and most N-Boc-protected amines. The utility of hydroxyl groups in lactams was shown by functional group transformations. Hydrogenolysis of C(5)-functionalized isoxazolines, bearing trimethylsilyl, phosphonate, or sulfone groups, was also studied to demonstrate limitations.

The convenient and scalable preparative approach for the two-step α-methylation of ketones is described. The optimized protocols for regioselective preparation of enaminones with further diastereoselective and functional groups tolerant hydrogenation to α-methylketones are developed. The scope and limitations of the proposed methodology are discussed. The advantages compared to known procedures are demonstrated. The unexpected role of acetone in the hydrogenation is suggested. The evaluation of the method for both early building block synthesis and late-stage CH-functionalization is shown. The elaborate procedures' preparability and scalability are demonstrated by the synthesis of several α-methyl ketones up to 100 g amount.

A Cu-catalyzed, easily scalable one-pot synthesis of fused pyridines by the reaction of cyclic ketones with propargylamine is described. The protocol was optimized based on the results of more than 30 experiments. The highest product yields were achieved in i-PrOH as a solvent in the presence of 5.0 mol % CuCl2 in air. In contrast to the well-known Au-catalyzed protocol, our procedure is "laboratory friendly", cost-effective, and suitable for preparing dozens of grams of fused pyridine-based building blocks and does not require a high-pressure autoclave technique. Decreasing the catalyst amount in the reaction to 1.25 mol % CuCl2 provided a yield comparable to that achieved with 5 mol % catalyst, though a longer reaction time was required. A plausible reaction mechanism was proposed. The scope and limitation of the reaction were studied using 24 different cyclic ketones as starting materials. The fused pyridine yield decreased among cyclic ketones in the following order: six-membered ≫ eight-membered > five-membered ∼ seven-membered. The elaborated reaction conditions demonstrated tolerance to a number of protective functional groups in ketone such as ester, tert-butoxycarbonyl (Boc)-protected amine, and acetal moieties.

An important aspect of molecular mechanics simulations of a protein structure and ligand binding often involves the generation of reliable force fields for nonstandard residues and ligands. We consider the aminoacyl-tRNA synthetase (AaRS) system that involves nucleic acid and amino acid derivatives, obtaining force field atomic charges using the restrained electrostatic potential (RESP) approach. These charges are shown to predict observed properties of the post-transfer editing reaction in this system, in contrast to simulations performed using approximate charges conceived based upon standard charges for related systems present in force field databases. In particular, the simulations predicted key properties induced by mutation. The approach taken for generating the RESP charges retains established charges for known fragments, defining new charges only for the novel chemical features present in the modified residues. This approach is of general relevance for the design of force fields for pharmacological applications, and indeed the AaRS target system is itself relevant to antibiotics development.

The new efficient, convenient protocol for the synthesis of heteroannelated 3-cyanopyridines and pyrimidines starting from diverse aminoheterocycles and 3,3-dimethoxy-2-formylpropionitrile sodium salt was elaborated. The advantages and improvements of the procedure compared to previously known methods are shown. The scope and limitations of the method are determined. The impact of the structural features on regioselectivity are discussed. The preparativeness, scalability, and application scope of the elaborated protocol are demonstrated by the synthesis of five heteroannelated 3-cyanopyridines in quantities up to 100 grams.

In this manuscript, we developed a two-fold symmetric linchpin (TSL) that converts readily available phage-displayed peptides libraries made of 20 common amino acids to genetically-encoded libraries of bicyclic peptides displayed on phage. TSL combines an aldehyde-reactive group and two thiol-reactive groups; it bridges two side chains of cysteine [C] with an N-terminal aldehyde group derived from the N-terminal serine [S], yielding a novel bicyclic topology that lacks a free N-terminus. Phage display libraries of SX1CX2X3X4X5X6X7C sequences, where X is any amino acid but Cys, were converted to a library of bicyclic TSL-[S]X1[C]X2X3X4X5X6X7[C] peptides in 45 ± 15% yield. Using this library and protein morphogen NODAL as a target, we discovered bicyclic macrocycles that specifically antagonize NODAL-induced signaling in cancer cells. At a 10 μM concentration, two discovered bicyclic peptides completely suppressed NODAL-induced phosphorylation of SMAD2 in P19 embryonic carcinoma cells. The TSL-[S]Y[C]KRAHKN[C] bicycle inhibited NODAL-induced proliferation of NODAL-TYK-nu ovarian carcinoma cells with apparent IC50 of 1 μM. The same bicycle at 10 μM concentration did not affect the growth of the control TYK-nu cells. TSL-bicycles remained stable over the course of the 72 hour-long assays in a serum-rich cell-culture medium. We further observed general stability in mouse serum and in a mixture of proteases (Pronase™) for 21 diverse bicyclic macrocycles of different ring sizes, amino acid sequences, and cross-linker geometries. TSL-constrained peptides to expand the previously reported repertoire of phage-displayed bicyclic architectures formed by cross-linking Cys side chains. We anticipate that it will aid the discovery of proteolytically stable bicyclic inhibitors for a variety of protein targets., A two-fold symmetric linchpin (TSL) converts readily available phage-displayed disulfide peptide libraries to proteolytically stable bicyclic peptides. The bicyclic phage library was screened to discover an antagonist of NODAL morphogen.

International audience; The days when medicinal chemistry was limited to a few series of compounds of therapeutic interest are long gone. Nowadays, no human may succeed to acquire a complete overview of more than a billion existing or feasible compounds within which the potential “blockbuster drugs” are well hidden and yet only a few mouse clicks away. To reach these “hidden treasures”, we adapted the generative topographic mapping method to enable efficient navigation through the chemical space, from a global overview to a structural pattern detection, covering, for the first time, the complete ZINC library of purchasable compounds, relative to 1.6 million biologically relevant ChEMBL molecules. About 40 000 hierarchical maps of the chemical space were constructed. Structural motifs inherent to only one library were identified. Roughly 20 000 off-market ChEMBL compound families represent incentives to enrich commercial catalogs. Alternatively, 125 000 ZINC-specific compound classes, absent in structure–activity bases, are novel paths to explore in medicinal chemistry. The complete list of these chemotypes can be downloaded using the link https://forms.gle/B6bUJj82t9EfmttV6.

A practical divergent synthetic approach is reported for the library of regio- and stereoisomers of glutamic acid analogs built on the spiro[3.3]heptane scaffold. Formation of the spirocyclic scaffold was achieved starting from a common precursor – an O-silylated 2-(hydroxymethyl)cyclobutanone derivative. Its olefination required using the titanium-based Tebbe protocol since the standard Wittig reaction did not work with this particular substrate. The construction of the second cyclobutane ring of the spirocyclic system was achieved through either subsequent dichloroketene addition or Meinwald oxirane rearrangement as the key synthetic steps, depending on the substitution patterns in the target compounds (1,6- or 1,5-, respectively). Further modified Strecker reaction of the resulting racemic spirocyclic ketones with the Ellman’s sulfinamide as a chiral auxiliary had low to moderate diastereoselectivity; nevertheless, all stereoisomers were isolated in pure form via chromatographic separation, and their absolute configuration was confirmed by X-ray crystallography. Members of the library were tested for the inhibitory activity against H. pylori glutamate racemase.

Physico-chemical properties important to drug discovery (pK

The approaches to immobilization of metal-complex catalysts for organic processes of hydrogenation, alkene metathesis, and cross-coupling on silica and polymeric and other carriers are considered. The advantages and lack of modern approaches to the creation of such systems are analyzed. It was shown that the stability of the catalyst with immobilized metal complex in the respective process was directly related to the mechanism of its catalytic action, namely, ligand cleavage in the catalytic cycle. Among the considered catalysts for various types of reactions, the catalysts for hydrogenation processes had the highest stability; this peculiarity is associated with specific features of their action.

A new, high-yielding, and practical method for synthesis of 1-methyl-3-(trifluoromethyl)-1H-pyrazole and 1-methyl-5-(trifluoromethyl)-1H-pyrazole, key intermediates for important building blocks re...

It is shown that a composite containing nickel nanoparticles and carboneous multi-layer graphene-like particles on aerosil, prepared by pyrolysis of deposited nickel complex with melamine, catalyzes hydrogenation of furfural to furfuryl alcohol as well as hydrogenation of quinoline to 1,2,3,4-tetrahydroquinoline. The highest yield of hydrogenation products (27% of furfuryl alcohol at 100°C, 30 atm H2, and 25% of quinoline at 100°C, 100 atm H2) is achieved with the use of composites with higher nickel content (8.4%) and higher size of defect-free graphene areas (ratio of band intensities ID/IG in Raman spectrum 0.9).

The reactivity of azomethines based on trifluoroacetaldehyde hydrate in the Castagnoli-Cushman reaction (CCR) was researched. The impact of the nature of anhydrides explored on the reaction route was determined. The preparative procedures for the synthesis of N-substituted (3R*,4R*)-1-oxo-3-(trifluoromethyl)-1,2,3,4-tetrahydroisoquinoline-4-carboxylic and (1R*,2R*)-4-oxo-2-(trifluoromethyl)-2,3,4,5-tetrahydro-1H-benzo[d]azepine-1-carboxylic acids in gram scales were elaborated. It was shown that the trifluoromethyl group remarkably decreased the reactivity of azomethines in CCR. The mechanism for the formation of different products depending on the anhydride's nature was proposed.

The possibility of deoxofluorination of β-keto esters using SF4 was investigated. The scope and limitation of the reaction were determined. The efficient method for the synthesis of β,β-difluorocarboxylic acids was elaborated based on the reaction. The set of mentioned acids, being the perspective building blocks for medicinal chemistry, were synthesized on multigram scale. The safety of SF4 use was discussed. The described method does not improve upon the safety of using SF4, but practical recommendations for working with the reagent are proposed. Despite the hazards of using toxic SF4, a significant increase of efficacy in the synthesis of medicinal-chemistry-relevant building blocks, based on the reaction, in comparison with earlier described approaches is shown.

The ability to efficiently synthesize desired compounds can be a limiting factor for chemical space exploration in drug discovery. This ability is conditioned not only by the existence of well-studied synthetic protocols but also by the availability of corresponding reagents, so-called building blocks (BB). In this work, we present a detailed analysis of the chemical space of 400K purchasable BB. The chemical space was defined by corresponding synthons – fragments contributed to the final molecules upon reaction. They allow an analysis of BB physicochemical properties and diversity, unbiased by the leaving and protective groups in actual reagents. The main classes of BB were analyzed in terms of their availability, rule-of-two-defined quality, and diversity. Available BBs were eventually compared to a reference set of biologically relevant synthons derived from ChEMBL fragmentation, in order to illustrate how well they cover the actual medicinal chemistry needs. This was performed on a newly constructed universal generative topographic map of synthon chemical space, allowing to visualize both libraries and analyze their overlapping and library-specific regions.

An efficient synthesis (up to a 200 g scale) of 3-hydroxypyrrolidin-2-ones bearing alkyl substituents or functional groups at the C-5 position is described. The reaction sequence started from 1,3-dipolar cycloaddition of

Most of the existing computational tools for de novo library design are focused on the generation, rational selection, and combination of promising structural motifs to form members of the new library. However, the absence of a direct link between the chemical space of the retrosynthetically generated fragments and the pool of available reagents makes such approaches appear as rather theoretical and reality-disconnected. In this context, here we present Synthons Interpreter (SynthI), a new open-source toolkit for de novo library design that allows merging those two chemical spaces into a single synthons space. Here synthons are defined as actual fragments with valid valences and special labels, specifying the position and the nature of reactive centers. They can be issued from either the "breakup" of reference compounds according to 38 retrosynthetic rules or real reagents, after leaving group withdrawal or transformation. Such an approach not only enables the design of synthetically accessible libraries and analog generation but also facilitates reagents (building blocks) analysis in the medicinal chemistry context. SynthI code is publicly available at https://github.com/Laboratoire-de-Chemoinformatique/SynthI.

Here we present a new open-source toolkit for library design, called Synthons Interpreter or SynthI that allows merging those chemical space of the retrosynthetically generated fragments and the pool of available reagents into a single synthons space. Here synthons are defined as the actual fragments with valid valences and special labels, defining the position and nature of reactive centers. They can be issued from either the “break-up” of reference compounds according to retrosynthetic rules, or real reagents/BBs, after leaving groups transformation. Such an approach not only enables the design of synthetically accessible libraries and analogs generation but also facilitates BB analysis in the medicinal chemistry context. SynthI code is available in https://github.com/Laboratoire-de-Chemoinformatique/SynthI

The third generation Buchwald precatalysts Pd(ABP)(Phos)(OMs) (also known as Phos Pd G3)) with XPhos and RuPhos were prepared in multigram scale by a modified procedure (ABP = fragment of C-deprotonated 2-aminobiphenyl, XPhos = 2-dicyclohexylphosphino-2′,4′,6′-triisopropylbiphenyl, RuPhos = 2-dicyclohexylphosphino-2′,6′-diisopropoxybiphenyl, OMs− = CH3SO3−). The 1H- and 31P-NMR spectra of the title complexes and some impurities, measured by various 1D and 2D techniques, were analyzed in detail. The solvent-dependent isomerization of Pd(ABP)(XPhos)(OMs) was studied by NMR, and the X-ray structures of two isomers were determined. The impurities in precatalysts, such as Pd(ABP)(HABP)(OMs) (HABP—neutral 2-aminobiphenyl coordinated to Pd2+ in N-monodentate mode) and PdCl2(XPhos)2, were identified and characterized by single crystal X-ray diffraction. A simple method for the quick quality control (QC) of the precatalysts, suitable for routine use, was proposed. The method was based on the assessment of the impurity content on the basis of the 1H-NMR spectra analysis.