Search

The large development in the consumption of rubber is observed in the recent years, which leads to an increase of the production of rubber related waste. Rubbers are not hazardous waste, but they constitute a hazard for both environment and health, in case of fire in storage sites. So, recycling appears as one of the best solutions for disposing of rubber waste.This paper presents an experimental investigation dealing with the valorisation of rubber waste, specifically rubber obtained from old shoes sole waste. The waste rubbers are used form (0/5 mm) to mixes as addition at percentage (10%, 20%, 30% and 40%) in sand concrete. The physical (workability, bulk density), mechanical (compressive and flexural strength) and thermal properties are studied and analysed.The results indicate that the incorporation of rubber waste particles in sand concrete contributes to increase the workability and reduce the bulk density of all studied sand concrete. The obtained results show that mechanical performance (compressive and flexural strength) decreases when the rubber content increases. Nevertheless, the presence of rubber aggregate leads to a significant reduction in thermal conductivity, which improves the thermal insulation performances of sand concrete. This study insures that reusing of recycled rubber waste in sand concrete gives a positive approach to reduce the cost of materials and solve some environmental problems.

Until now, there are few studies on the effect of mineral admixtures on correlation between compressive strength and ultrasonic pulse velocity for concrete. The aim of this work is to study the effect of mineral admixture available in Algeria such as limestone powder, granulated slag and natural pozzolana on the correlation between compressive strength and corresponding ultrasonic pulse velocity for self-compacting concrete (SCC). Compressive strength and ultrasonic pulse velocity (UPV) were determined for four different SCC (with and without mineral admixture) at the 3, 7, 28 and 90 day curing period. The results of this study showed that it is possible to develop a good correlation relationship between the compressive strength and the corresponding ultrasonic pulse velocity for all SCC studied in this research and all the relationships had exponential form. However, constants were different for each mineral admixture type; where, the best correlation was found in the case of SCC with granulated slag (R2 = 0.85). Unlike the SCC with pozzolana, which have the lowest correlation coefficient (R2 = 0.69).

In the last years, an increase of coffee beverages consumption has been observed all over the world; and its consumption increases the waste coffee grounds which will become an environmental problems. Recycling of this waste to produce new materials like sand concrete appears as one of the best solutions for reduces the problem of pollution. This work aims to study the possibility of recycling waste coffee grounds (Spent Coffee Grounds (SCG)) as a fine aggregate by replacing the sand in the manufacturing of dune sand concrete. For this; sand concrete mixes were prepared with substitution of sand with the spent coffee grounds waste at different percentage (0%, 5%, 10%, 15% and 20% by volume of the sand) in order to study the influence of this wastes on physical (Workability, bulk density and porosity), mechanical (compressive and flexural strength) and Thermal (Thermal conductivity and thermal diffusivity) properties of dune sand concrete. The results showed that the use of spent coffee grounds waste as partial replacement of natural sand contributes to reduce workability, bulk density and mechanical strength of sand concrete mixes with an increase on its porosity. However, the thermal characteristics are improved and especially for a level of 15% and 20% of substitution. So, it is possible to obtain an insulating material which can be used in the various types of structural components. This study ensures that reusing of waste coffee grounds in dune sand concrete gives a positive approach to reduce the cost of materials and solve some environmental problems.

The development of new building materials is a current problem where researchers are trying to find the right materials for each region and returning cheapest countries. Recycling and recovery of waste are now considered as a promising solution to meet the deficit between production and consumption and protecting the environment. This work focused on the study of the effect of brick waste in the production of cement mortar with substitution rates ranging from 5-30% by weight of cement and to compare its performance with fresh and hardened state with ordinary mortar considered as control mortar. Compressive and tensile strengths up to 28 days of age were compared with those of controlled mortar. Water absorption was also measured at 28 days of age. The test results indicate the beneficial effect of brick waste powder on performance of cement mortar with an optimum of 15% of cement weight substitution.

Over the past twenty years, the rubber wastes are an important part of municipal solid waste. This work focuses on the recycling of rubber waste, specifically rubber waste of used shoes discharged into the nature and added in the mass of crushed sand concrete with percentage (10%, 20%, 30% and 40%). The physical (workability, fresh density), mechanical (compressive and flexural strength) and thermal (thermal conductivity) of different crushed sand concrete made are analyzed and compared to the respective controls. The use of rubber waste in crushed sand concrete contributes to reduce the bulk density and performance of sand concrete. Nevertheless, the use of rubber aggregate leads to a significant reduction in thermal conductivity, which improves the thermal insulation of crushed sand concrete.