Search

Sensitization of graphene with inorganic semiconducting nanostructures has been demonstrated as a powerful strategy to boost its optoelectronic performance. However, the limited tunability of optical properties and toxicity of metal cations in the inorganic sensitizers prohibits their widespread applications, and the in-depth understanding of the essential interfacial charge-transfer process within such hybrid systems remains elusive. Here, we design and develop high-quality nanographene (NG) dispersions with a large-scale production using high-shear mixing exfoliation. The physisorption of these NG molecules onto graphene gives rise to the formation of graphene-NG van der Waals heterostructures (VDWHs), characterized by strong interlayer coupling through π-π interactions. As a proof of concept, photodetectors fabricated on the basis of such VDWHs show ultrahigh responsivity up to 4.5 × 10 7 A/W and a specific detectivity reaching 4.6 × 10 13 Jones, being competitive with the highest values obtained for graphene-based photodetectors. The outstanding device characteristics are attributed to the efficient transfer of photogenerated holes from NGs to graphene and the long-lived charge separation at graphene-NG interfaces (beyond 1 ns), as elucidated by ultrafast terahertz (THz) spectroscopy. These results demonstrate the great potential of such graphene-NG VDWHs as prototypical building blocks for high-performance, low-toxicity optoelectronics.

Organic transistors are key elements for flexible, wearable, and biocompatible logic applications. Multiresponsivity is highly sought-after in organic electronics to enable sophisticated operations and functions. Such a challenge can be pursued by integrating more components in a single device, each one responding to a specific external stimulus. Here, the first multiresponsive organic device based on a photochromic-ferroelectric organic field-effect transistor, which is capable of operating as nonvolatile memory with 11 bit memory storage capacity in a single device, is reported. The memory elements can be written and erased independently by means of light or an electric field, with accurate control over the readout signal, excellent repeatability, fast response, and high retention time. Such a proof of concept paves the way toward enhanced functional complexity in optoelectronics via the interfacing of multiple components in a single device, in a fully integrated low-cost technology compatible with flexible substrates., (© 2021 Wiley-VCH GmbH.)

We used cathodoluminescence (CL) spectroscopy to characterize the oxygen vacancies (V O ) in ceria (CeO 2 ). The effects of the processing atmosphere and thermal quenching temperature on the nature and distribution of the intrinsic defects and on the spectroscopic behavior were investigated. The presence of polarons and associates of the polarons with the oxygen vacancies such as (V O •• -Ce Ce ' ) • is demonstrated. CL intensity quenching above a critical concentration of V O has been shown. Even though the emission centers in all samples are the same, their concentration changes with the oxygen partial pressure of the processing atmosphere. Deconvolution of the observed CL spectra shows that the emissions originating from the F 0 centers prevail over those of F + centers of V O when the defect concentration is high., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

Flow, heat, and mass transfer in fixed beds of catalyst particles are complex phenomena and, when combined with catalytic reactions, are multiscale in both time and space; therefore, advanced computational techniques are being applied to fixed bed modeling to an ever-greater extent. The fast-growing literature on the use of computational fluid dynamics (CFD) in fixed bed design reflects the rapid development of this subfield of reactor modeling. We identify recent trends and research directions in which successful methodology has been established, for example, in computer generation of packings of complex particles, and where more work is needed, for example, in the meshing of nonsphere packings and the simulation of industrial-size packed tubes. Development of fixed bed reactor models, by either using CFD directly or obtaining insight, closures, and parameters for engineering models from simulations, will increase confidence in using these methods for design along with, or instead of, expensive pilot-scale experiments.

Palladium-based catalytic membrane reactors (CMRs) effectively remove H₂ to induce higher conversions in methane steam reforming (MSR) and water-gas-shift reactions (WGS). Within such a context, this work evaluates the technical performance of a novel CMR, which utilizes two catalysts in series, rather than one. In the process system under consideration, the first catalyst, confined within the shell side of the reactor, reforms methane with water yielding H₂, CO and CO₂. After reforming is completed, a second catalyst, positioned in series, reacts with CO and water through the WGS reaction yielding pure H₂O, CO₂ and H₂. A tubular composite asymmetric Pd/Au/Pd membrane is situated throughout the reactor to continuously remove the produced H₂ and induce higher methane and CO conversions while yielding ultrapure H₂ and compressed CO₂ ready for dehydration. Experimental results involving (i) a conventional packed bed reactor packed (PBR) for MSR, (ii) a PBR with five layers of two catalysts in series and (iii) a CMR with two layers of two catalysts in series are comparatively assessed and thoroughly characterized. Furthermore, a comprehensive 2D computational fluid dynamics (CFD) model was developed to explore further the features of the proposed configuration. The reaction was studied at different process intensification-relevant conditions, such as space velocities, temperatures, pressures and initial feed gas composition. Finally, it is demonstrated that the above CMR module, which was operated for 600 h, displays quite high H₂ permeance and purity, high CH₄ conversion levels and reduced CO yields., Competing Interests: The authors declare no conflict of interest.

The probability and consequences of gene flow to wild relatives is typically considered in the environmental risk assessment of genetically engineered crops. This is a report from a discussion by a group of experts who used a problem formulation approach to consider existing information for risk assessment of gene flow from cassava (Manihot esculenta) genetically engineered for virus resistance to the 'wild' (naturalized) relative M. glaziovii in East Africa. Two environmental harms were considered in this case: (1) loss of genetic diversity in the germplasm pool, and (2) loss of valued species, ecosystem resources, or crop yield and quality due to weediness or invasiveness of wild relatives. Based on existing information, it was concluded that gene flow will occur, but it is not likely that this will reduce the genetic diversity in the germplasm pool. There is little existing information about the impact of the virus in natural populations that could be used to inform a prediction about whether virus resistance would lead to an increase in reproduction or survival, hence abundance of M. glaziovii. However, an increase in the abundance of M. glaziovii should be manageable, and would not necessarily lead to the identified environmental harms.

Cyanogenic potential (CNp) of cassava constitutes a serious problem for over 500 million people who rely on the crop as their main source of calories. Genetic diversity is a key to successful crop improvement for breeding new improved variability for target traits. Forty-three improved genotypes of cassava developed by International Institute of Tropical Agriculture (ITA), Ibadan, were characterized for CNp trait using 35 Simple Sequence.Repeat (SSR) markers. Essential colorimetry picric test was used for evaluation of CNp on a color scale of 1 to 14. The CNp scores obtained ranged from 3 to 9, with a mean score of 5.48 (+/- 0.09) based on Statistical Analysis System (SAS) package. TMS M98/ 0068 (4.0 +/- 0.25) was identified as the best genotype with low CNp while TMS M98/0028 (7.75 +/- 0.25) was the worst. The 43 genotypes were assigned into 7 phenotypic groups based on rank-sum analysis in SAS. Dissimilarity analysis representatives for windows generated a phylogenetic tree with 5 clusters which represented hybridizing groups. Each of the clusters (except 4) contained low CNp genotypes that could be used for improving the high CNp genotypes in the same or near cluster. The scatter plot of the genotypes showed that there was little or no demarcation for phenotypic CNp groupings in the molecular groupings. The result of this study demonstrated that SSR markers are powerful tools for the assessment of genetic variability, and proper identification and selection of parents for genetic improvement of low CNp trait among the IITA cassava collection.

Xanthomonas axonopodis pv manihotis is the causal agent of cassava bacterial blight (CBB) worldwide. CBB disease is a major constraint to cassava cultivation, and losses can be extremely severe in regions where highly susceptible cultivars are grown. To develop an efficient disease management policy, the genetic diversity of the pathogens population must be known. There is dearth of information on the genetic diversity of X. axonopodis pv manihotis population in Nigeria. We used RAPD (random amplified polymorphic DNA) and AFLP (amplified fragment length polymorphism), a PCR-based technique, to characterize the X. axonopodis pv manihotis isolates from the western States of Nigeria. Thirteen strains Xam and 2 reference strains were tested with eight primers combination of AFLP and 4 RAPD primers. RAPD amplified DNA fragment data showed four major clusters at 80 % similarity coefficient level and two strains were not clustered by this analysis. Strains Kwa76A and Ond48A were also separated in the principal component analysis of the same data. Numerical analysis differentiated the AFLP patterns into four distinct clusters and grouped two strains separately at 66 % similarity. PCA assembly grouped the bacterial strains into 4 and one of the strains was singled out from the others. The two DNA analyses techniques seem to be complimentary to one another and informative on the genomic structure of Xam population in Western Nigeria. The genetic analysis presented here contributes to understanding of the Xam population structure in Western Nigeria.

Background: Cassava (Manihot esculenta Crantz), a starchy root crop grown in tropical and subtropical climates, is the sixth most important crop in the world after wheat, rice, maize, potato and barley. The repertoire of simple sequence repeat (SSR) markers for cassava is limited and warrants a need for a larger number of polymorphic SSRs for germplasm characterization and breeding applications., Results: A total of 846 putative microsatellites were identified in silico from an 8,577 cassava unigene set with an average density of one SSR every 7 kb. One hundred and ninety-two candidate SSRs were screened for polymorphism among a panel of cassava cultivars from Africa, Latin America and Asia, four wild Manihot species as well as two other important taxa in the Euphorbiaceae, leafy spurge (Euphorbia esula) and castor bean (Ricinus communis). Of 168 markers with clean amplification products, 124 (73.8%) displayed polymorphism based on high resolution agarose gels. Of 85 EST-SSR markers screened, 80 (94.1%) amplified alleles from one or more wild species (M epruinosa, M glaziovii, M brachyandra, M tripartita) whereas 13 (15.3%) amplified alleles from castor bean and 9 (10.6%) amplified alleles from leafy spurge; hence nearly all markers were transferable to wild relatives of M esculenta while only a fraction was transferable to the more distantly related taxa. In a subset of 20 EST-SSRs assessed by fluorescence-based genotyping the number of alleles per locus ranged from 2 to 10 with an average of 4.55 per locus. These markers had a polymorphism information content (PIC) from 0.19 to 0.75 with an average value of 0.55 and showed genetic relationships consistent with existing information on these genotypes., Conclusion: A set of 124 new, unique polymorphic EST-SSRs was developed and characterized which extends the repertoire of SSR markers for cultivated cassava and its wild relatives. The markers show high PIC values and therefore will be useful for cultivar identification, taxonomic studies, and genetic mapping. The study further shows that mining ESTs is a highly efficient strategy for polymorphism detection within the cultivated cassava gene pool.

Cassava mosaic disease (CMD) caused by African cassava mosaic virus (ACMV) and East African cassava mosaic Cameroon virus (EACMCV) is the major constraint to cassava production in Nigeria. Sequences of the DNA-A component of ACMV and EACMCV isolates from leguminous plant species (Senna occidentalis, Leucana leucocephala and Glycine max), castor oil plant (Ricinus communis), a weed host (Combretum confertum) and a wild species of cassava (Manihot glaziovii) were determined. All ACMV isolates from these hosts showed 96-98% nucleotide sequence identity with cassava isolates from West Africa. EACMCV was found only in four hosts (S. occidentalis, L. leucocephala, C. confertum, M. glaziovii), and sequences of these isolates showed 96-99% identity with cassava isolates from West Africa. These results provide definitive evidence for the natural occurrence of ACMV and EACMCV in plant species besides cassava.

Cassava, a staple food in sub-Saharan Africa, does not provide adequate amounts of pro-vitamin A (VA) carotenoids and has been targeted for biofortification (i.e. selectively breeding cultivars of increased nutrient density with agroeconomically acceptable characteristics). However, the accessibility of pro-VA carotenoids for absorption in different cultivars of cassava remains unknown. Here, we used the coupled in vitro digestion/Caco-2 cell uptake model to screen the relative accessibility of beta-carotene (betaC) in 10 cultivars of cassava with varying concentrations of betaC. After cooking (boiled for 30 min), the betaC concentration in tubers from different cultivars ranged from less than detectable to 6.9 microg betaC/g cassava. Samples were subjected to simulated oral, gastric, and small intestinal digestion to determine stability and micellarization of betaC. All-trans betaC, 9-cis betaC, and 13-cis betaC were the most abundant carotenoids in cooked cassava and recoveries after digestion exceeded 70%. Efficiency of micellarization of total betaC was 30 +/- 2% for various cultivars with no significant difference in isomers and linearly proportional to concentration in cooked cassava (r = 0.87; P < 0.001). Accumulation of all-trans betaC by Caco-2 cells incubated with the diluted micelle fraction for 4 h was proportional (R(2) = 0.99; P < 0.001) to the quantity present in micelles. These results suggest that all-trans betaC content appears to provide the key selection marker for breeding cassava to improve VA status and that the more complicated screening procedure using in vitro digestion coupled to cell uptake does not provide additional information on potential bioavailability.

Nine cassava genotypes were evaluated for their growth responses and adaptability to soil moisture stress on the field and in the screenhouse in Nigeria. Genotypes were evaluated in three savanna agroecologies in a randomized complete block design with three replicates. Screenhouse evaluation was conducted using three moisture regimes of 75, 50 and 25% Field Capacity (FC) in a two-factor factorial experiment in CRD with three replicates. Morphological and yield data were collected on the field and in the screenhouse. Results showed significant (p < 0.05) difference among genotypes on the field and in the screenhouse. Field moisture stress led to a decline in plant height by 47%, stem girth by 15%, number of tubers by 95% and tuber yield by 87%. Screenhouse moisture condition of 25% FC led to a reduction in plant height by 12.6 and 21.2%, stem girth by 16.3 and 21.7%, number of roots by 94.5 and 88.7% and root weight by 93.3 and 94.9%, respectively at 16 and 30 WAP. Moisture stress therefore resulted into considerable reduction in both vegetative growth and yield of cassava genotypes. Therefore, a concerted effort in breeding cassava for drought tolerance is needed as cassava cultivation is expanding into nontraditional semiarid regions of sub-Saharan Africa. Germplasm introduced from Latin America (especially north-eastern Brazil) is providing a unique source of variability to further broaden the genetic base for drought tolerance in cassava.

Cassava (Manihot esculenta Crantz) is a staple food for over 600 million people in the tropics and subtropics and is increasingly used as an industrial crop for starch production. Cassava has a high growth rate under optimal conditions but also performs well in drought-prone areas and on marginal soils. To increase the tools for understanding and manipulating drought tolerance in cassava, we generated expressed sequence tags (ESTs) from normalized cDNA libraries prepared from dehydration-stressed and control well-watered tissues. Analysis of a total of 18,166 ESTs resulted in the identification of 8,577 unique gene clusters (5,383 singletons and 3,194 clusters). Functional categories could be assigned to 63% of the unigenes, while another approximately 11% were homologous to hypothetical genes with unclear functions. The remaining approximately 26% were not significantly homologous to sequences in public databases suggesting that some may be novel and putatively specific to cassava. The dehydration-stressed library uncovered numerous ESTs with recognized roles in drought-responses, including those that encode late-embryogenesis-abundant proteins thought to confer osmoprotective functions during water stress, transcription factors, heat-shock proteins as well as proteins involved in signal transduction and oxidative stress. The unigene clusters were screened for short tandem repeats for further development as microsatellite markers. A total of 592 clusters contained 646 repeats, representing 3.3% of the ESTs queried. The ESTs presented here are the first dehydration stress transcriptome of cassava and can be utilized for the development of microarrays and gene-derived molecular markers to further dissect the molecular basis of drought tolerance in cassava.

Inoculation of cassava with infectious clones of cassava mosaic geminiviruses (Geminiviridae: Begomovirus) and total DNA extracts from plants infected with well-characterised viruses was evaluated using the Bio-Rad Helios Gene Gun System. Total DNA extracts from infected plants and cloned viruses were produced for coating gold particles and bombardment onto new cassava genotypes, 96/1089A, 96/1039, 96/0160, 96/0304 and three local landraces TME 117, TME 3 and TME 4. Cloned DNA of a Kenyan isolate of the recombinant variant of East African cassava mosaic virus (EACMV-UG2-[Ka]), was only infectious to TME 117 (7/10 plants), 3 weeks post-inoculation with mild infection symptoms in the newly developing leaves. Biolistic inoculation with a chimeric pseudorecombinant virus between DNA A and B components from EACMV-[Ke-Kilifi] and EACMV-UG2-[Ka], respectively, was infectious to TME 117, 96/1039 and 96/0304 and developed very severe and persistent symptoms. TME 3 and TME 4 also developed symptoms, 12 days post-inoculation (d.p.i.). Total DNA extracts of ACMV and EACMV-[Ke-Kilifi] resulted in serious infections with symptoms already evident, 10d.p.i. In general, biolistic inoculation trials with total DNA extracts resulted in a higher number of infected plants expressing symptoms at a much earlier stage (10-12d.p.i.) compared with trials inoculated with virus clones.

Large-scale screening of cassava, Manihot esculenta Crantz, genotypes for resistance to infestation by whitefly Bemisia tabaci Gennadius, the vector of cassava mosaic geminiviruses, is limited. A range of new cassava elite clones were therefore assessed for the whitefly infestation in the 1999/2000 and 2000/2001 cropping seasons in experimental fields of International Institute of Tropical Agriculture, Ibadan, Nigeria. On each scoring day, between 0600 and 0800 hours when the whiteflies were relatively immobile, adult whitefly populations on the five topmost expanded leaves of cassava cultivars were counted. All through the 6-mo scoring period, there was a highly significant difference in whitefly infestation among the new cassava elite clones. Vector population buildup was observed in Ibadan (forest-savanna transition zone) and Onne (humid forest), 2 mo after planting (MAP). Mean infestation across cassava genotypes was significantly highest (16.6 whiteflies per plant) in Ibadan and lowest in Zaria (0.2). Generally, whitefly infestation was very low in all locations at 5 and 6 MAP. During this period, cassava genotypes 96/1439 and 91/02324 significantly supported higher infestations than other genotypes. Plants of 96/1089A and TMS 30572 supported the lowest whitefly infestation across cassava genotypes in all locations. The preferential whitefly visitation, the differences between locations in relation to whitefly population, cassava mosaic disease, and the fresh root yield of cassava genotypes are discussed.

Field evaluation of six cassava genotypes for resistance to root rot disease was compared with three rapid laboratory methods (whole root inoculation, root slice inoculation, and stem inoculation) for resistance screening. Both the field evaluation and the three laboratory methods separated the varieties into resistant and susceptible groups. Genotypes 30572 and 91/02324 were resistant while 92/0247, 92/0057 and TME-1 were susceptible. One genotype (30001) was not consistent in its reaction between field evaluation and laboratory assays. In the laboratory assays with three fungal pathogens, different pathogens varied in their levels of virulence on host genotypes. With the most virulent pathogen (Botryodiplodia theobromae), the majority of the genotypes reacted in the same way across trials with the root slice and whole root assays. Due to the good correlation between the whole root assay and the field results, we recommend this for the routine assessment of cassava resistance to root rot disease and for the analysis of virulence of pathogen isolates. However, because of the advantages in terms of economy of labour, space, time, quantity of root and inoculum required, the root slice assay could be used for the preliminary screening of large cassava accessions. The selected genotypes can then be further screened with the whole root inoculation method.

Although cassava is a major food crop, its scientific breeding began only recently compared with other crops. Significant progress has been achieved, particularly in Asia where cassava is used mainly for industrial processes and no major biotic constraints affect its productivity. Cassava breeding faces several limitations that need to be addressed. The heterozygous nature of the crop and parental lines used to generate new segregating progenies makes it difficult to identify parents with good breeding values. Breeding so far has been mainly based on a mass phenotypic recurrent selection. There is very little knowledge on the inheritance of traits of agronomic relevance. Several approaches have been taken to overcome the constraints in the current methodologies for the genetic improvement of cassava. Evaluations at early stages of selection allow for estimates of general combining ability effect or breeding values of parental lines. Inbreeding by sequential self-pollination facilitates the identification of useful recessive traits, either already present in the Manihot gene pool or induced by mutagenesis.

The aim of this study was to investigate under a controlled environment, the effect of temperature on the survival and infectivity of Pseudotheraptus devastans Distant, a cassava anthracnose disease vector. The insect P. devastans was collected from young cassava (Manihot esculenta Crantz) field plots, at the International Institute of Tropical Agriculture, (IITA), Ibadan, Nigeria. A mixture of the different developmental stages of eggs, first to fifth instar nymphs, and adults, were incubated in controlled environment chambers, under various constant temperatures of: 15, 17, 22, 25, 27, 30, and 35 degrees C. Relative humidity at different temperature conditions were recorded and maintained at 90%, 85%, 80%, 75%, 70%, 65%, and 60%, respectively. A significant increase in insect survival was observed between 22 and 27 degrees C temperature conditions while a significant decrease in survival was observed at 15 degrees C and above 30 degrees C. Lesion number, lesion diameter and infectivity among the insect stages varied as a function of temperature and relative humidity. Infectivity was highest at 22-25 degrees C maintained at 75-80% RH and lowest at 15 degrees C and above 30 degrees C maintained respectively, at 65% RH and 90% RH. There was considerable low vector infectivity due to low survival of the insects at extreme temperatures.

Cassava (Manihot esculenta) is an allogamous, vegetatively propagated, Neotropical crop that is also widely grown in tropical Africa and Southeast Asia. To elucidate genetic diversity and differentiation in the crop's primary and secondary centers of diversity, and the forces shaping them, SSR marker variation was assessed at 67 loci in 283 accessions of cassava landraces from Africa (Tanzania and Nigeria) and the Neotropics (Brazil, Colombia, Peru, Venezuela, Guatemala, Mexico and Argentina). Average gene diversity (i.e., genetic diversity) was high in all countries, with an average heterozygosity of 0.5358 +/- 0.1184. Although the highest was found in Brazilian and Colombian accessions, genetic diversity in Neotropical and African materials is comparable. Despite the low level of differentiation [F(st)(theta) = 0.091 +/- 0.005] found among country samples, sufficient genetic distance (1-proportion of shared alleles) existed between individual genotypes to separate African from Neotropical accessions and to reveal a more pronounced substructure in the African landraces. Forces shaping differences in allele frequency at SSR loci and possibly counterbalancing successive founder effects involve probably spontaneous recombination, as assessed by parent-offspring relationships, and farmer-selection for adaptation.

Fifty-three cassava lines were selected from breeding populations at the International Institute of Tropical Agriculture (IITA), Ibadan, Nigeria and screened in vitro for resistance to cassava anthracnose disease (CAD). The in vitro inoculation of stem cuttings with the fungus Colletotrichum gloeosporioides f.sp. manihotis showed significant differences (p +/- 0.05) in acervuli production and in the sensitivity of the cassava lines to the fungal infection after 7 days of incubation at 25 degrees C. Cassava lines 88/01084, 91/00595, 91/00475, 91/00344, 91/00684, 91/00313, 91/00422, and 91/00344 were highly resistant, with necrotic lesion sizes less than 7 mm. In contrast pedigree lines 88/02549, 89/0008, 91/00390 and 91/00402 were highly susceptible with the largest necrotic lesion size being greater than 20 mm. Ten cassava lines from the in vitro screening that showed varying levels of resistance to CAD were selected, based on their flowering abilities for diallel hydridization trials, and were further screened in greenhouse and field trials for CAD resistance. The greenhouse and field screening showed significant varietal differences (p +/- 0.05) in sensitivity to the fungus. In all cases, the progeny lines showed correlated levels of resistance irrespective of the type of screening or assessments. Correlation analysis of the in vitro, greenhouse and field assessments showed that there was a good correspondence among all three methods of evaluating for CAD.

Gene complementarity among various sources of resistance to greenbug biotype E was assessed. Analysis of the F2 generation of crosses between susceptible and resistant parents (mating 1) and among sources of resistance (mating 2) suggested that resistance in sorghum to greenbug biotype E was complexly inherited and, to some extent, dependent on the nature of both the resistant and susceptible parents. Positive transgressive segregation in the F2 generations of both matings was found to be due to effective plus factors, contributed by both parents in a cross, which complemented each other. The number of plus factors ranged from one to two in the susceptible parents and from two to five in the resistant parents of mating 1, and from one to five in the parents of mating 2. The consistently significant reciprocal effects shown by Sarvasi and PI264453 indicated that these sources had major factors for resistance in their cytoplasms, which were expressed in all their crosses. The results from this study indicated that the sources of resistance complemented each other to give increased number of F2 segregates with increased resistance. Thus, it should be possible to increase and diversify resistance of sorghum to greenbug biotype E by accumulating different, effective plus factors from various sources through recurrent selection.