Search

Structural health monitoring (SHM) aims to improve knowledge of the safety and maintainability of civil structures. The usage of recording systems exploiting wireless communication technology is particularly suitable for SHM, especially for rapid response following earthquakes. In this study, both of these issues are combined, and we report on the application of seismic interferometry to SHM using a dataset of seven earthquakes collected using a novel wireless system of accelerometers during the L'Aquila, Italy, seismic sequence in 2009. We show that interferometric analysis allows the estimation of the shear- wave velocity of seismic phases propagating throughout a structure, and, most important for SHM purposes, allows the monitoring of the velocity variations during the aftershock sequence. Moreover, innovatively we apply the S transform to the building response functions retrieved by interferometry to estimate the fundamental resonance frequency and the quality factor Q.

The influence of vibrating buildings on the free-field ground motion could affect the earthquake recordings collected inside or nearby the buildings. Some evidences are known for large structures, but also small buildings could adversely affect the quality of the recordings. An example is given for a station of the Italian Accelerometric Network whose recordings show a clear mark of the frequency of the host building. To tackle this problem in a more general way, we performed numerical simulations whose first aim was to validate existing empirical evidence from a test site. Gallipoli et al. (Bull Seismol Soc Am 96:2457-2464, 2006) monitored a release test on a 2-storey R.C. building in Bagnoli (Italy), showing that a single vibrating building may affect the "free-field" motion with an influence that reaches 20% of peak ground acceleration. We re-analysed the data of that experiment following the Safak (Soil Dyn Earthq Eng 17:509-517, 1998) approach to building-soil motion, described as propagation of up- and down-going S-waves. The numerical model is a chain of single degree of freedom oscillators, whose dynamic behaviour depends on mass, stiffness and damping. The agreement between the synthetic and real data encouraged us to use this model to reproduce generalised structures as systems with a single degree of freedom. We run multiple tests varying the distance, between building and station, and the building-soil coupling, obtaining a statistical distribution of the influence of a single vibrating building on free-field ground motion taking into account the distance.

In recent years, structural health monitoring (SHM) has received increasing interest from both research and professional engineering communities. This is due to the limitations related to the use of traditional methods based on visual inspection for a rapid and effective assessment of structures and infrastructures when compared with the great potential offered by newly developed automatic systems. Most of these kinds of systems allow the continuous estimation of structural modal properties that are strictly correlated to the mechanical characteristics of the monitored structure. These can change as a result of material deterioration and structural damage related to earthquake shaking. Furthermore, a suitable configuration of a dense sensor network in a real-time monitoring system can allow to detect and localize structural and non-structural damage by comparing the initial and a final state of the structure after a critical event, such as a relevant earthquake. In this paper, the modal curvature evaluation method, used for damage detection and localization on framed structures, considering the mode curvature variation due to strong earthquake shaking, is further developed. The modified approach is validated by numerical and experimental case studies. The extended procedure, named “Curvature Evolution Method” (CEM), reduces the required computing time and the uncertainties in the results. Furthermore, in this work, an empirical relationship between curvature variation and damage index has been defined for both bare and infilled frames.