Search

Bispecific antibodies combine the specificity of two antibodies into one molecule. During the past two decades, advancement in protein engineering enabled the development of more than 100 bispecific formats, three of which are approved by the FDA for clinical use. In parallel to protein engineering methods, advancement in conjugation chemistries have spurred the use of chemical engineering approaches to generate bispecific antibodies. Herein, we review selected chemical strategies employed to generate bispecific antibodies that cannot be made using protein engineering methods., (Copyright © 2021. Published by Elsevier Ltd.)

Resistance to antibody-drug conjugates (ADCs) has been observed in both preclinical models and clinical studies. However, mechanisms of resistance to pyrrolobenzodiazepine (PBD)-conjugated ADCs have not been well characterized and thus, this study was designed to investigate development of resistance to PBD dimer warheads and PBD-conjugated ADCs. We established a PBD-resistant cell line, 361-PBDr, by treating human breast cancer MDA-MB-361 cells with gradually increasing concentrations of SG3199, the PBD dimer released from the PBD drug-linker tesirine. 361-PBDr cells were over 20-fold less sensitive to SG3199 compared with parental cells and were cross-resistant to other PBD warhead and ADCs conjugated with PBDs. Proteomic profiling revealed that downregulation of Schlafen family member 11 (SLFN11), a putative DNA/RNA helicase, sensitizing cancer cells to DNA-damaging agents, was associated with PBD resistance. Confirmatory studies demonstrated that siRNA knockdown of SLFN11 in multiple tumor cell lines conferred reduced sensitivity to SG3199 and PBD-conjugated ADCs. Treatment with EPZ011989, an EZH2 inhibitor, derepressed SLFN11 expression in 361-PBDr and other SLFN11-deficient tumor cells, and increased sensitivity to PBD and PBD-conjugated ADCs, indicating that the suppression of SLFN11 expression is associated with histone methylation as reported. Moreover, we demonstrated that combining an ataxia telangiectasia and Rad3-related protein (ATR) inhibitor, AZD6738, with SG3199 or PBD-based ADCs led to synergistic cytotoxicity in either resistant 361-PBDr cells or cells that SLFN11 was knocked down via siRNA. Collectively, these data provide insights into potential development of resistance to PBDs and PBD-conjugated ADCs, and more importantly, inform strategy development to overcome such resistance., (©2021 American Association for Cancer Research.)

First-generation cysteine-based site-specific antibody-drug conjugates (ADCs) are limited to one drug per cysteine. However, certain applications require a high drug to antibody ratio (DAR), such as when low-potency payloads are used. Higher drug load can be achieved using classical cysteine conjugation methods, but these result in heterogeneity, suboptimal efficacy and pharmacokinetics. Here, we describe the design, synthesis and validation of heterobifunctional linkers that can be used for the preparation of ADCs with a DAR of two, three and four in a site-specific manner per single cysteine conjugation site, resulting in site-specific ADCs with a DAR of four, six and eight. The designed linkers carry a sulfhydryl-specific iodoacetyl reactive group, and multiple cyclic diene moieties which can efficiently react with maleimide-carrying payloads through the Diels-Alder reaction. As a proof of concept, we synthesized site-specific DAR four, six and eight ADCs carrying tubulysin (AZ13601508) using engineered antibodies with a cysteine inserted after position 239 in the antibody CH2 domain. We evaluated and compared the in vitro cytotoxicity of ADCs obtained via the site-specific platform described herein, with ADCs prepared using classical cysteine conjugation. Our data validated a novel cysteine-based conjugation platform for the preparation of site-specific ADCs with high drug load for therapeutic applications.

Multiple myeloma is a hematologic cancer that disrupts normal bone marrow function and has multiple lines of therapeutic options, but is incurable as patients ultimately relapse. We developed a novel antibody-drug conjugate (ADC) targeting CS-1, a protein that is highly expressed on multiple myeloma tumor cells. The anti-CS-1 mAb specifically bound to cells expressing CS-1 and, when conjugated to a cytotoxic pyrrolobenzodiazepine payload, reduced the viability of multiple myeloma cell lines in vitro In mouse models of multiple myeloma, a single administration of the CS-1 ADC caused durable regressions in disseminated models and complete regression in a subcutaneous model. In an exploratory study in cynomolgus monkeys, the CS-1 ADC demonstrated a half-life of 3 to 6 days; however, no highest nonseverely toxic dose was achieved, as bone marrow toxicity was dose limiting. Bone marrow from dosed monkeys showed reductions in progenitor cells as compared with normal marrow. In vitro cell killing assays demonstrated that the CS-1 ADC substantially reduced the number of progenitor cells in healthy bone marrow, leading us to identify previously unreported CS-1 expression on a small population of progenitor cells in the myeloid-erythroid lineage. This finding suggests that bone marrow toxicity is the result of both on-target and off-target killing by the ADC., (©2020 American Association for Cancer Research.)

Bispecific antibody (bsAb) applications have exponentially expanded with the advent of molecular engineering strategies that have addressed many of the initial challenges, including improper light chain pairing, heterodimer purity, aggregation, and pharmacokinetics. However, the lack of high-throughput methods for the generation of monovalent bsAbs has resulted in a bottleneck that has hampered their therapeutic evaluation, as current technologies can be cost-prohibitive and impractical. To address this issue, we incorporated single-matched point mutations in the CH3 domain to recapitulate the physiological process of human IgG4 Fab-arm exchange to generate monovalent bsAbs. Furthermore, we utilized the substitutions H435R and Y436F in the CH3 domain of IgG1, which incorporates residues from human IgG3, thus ablating protein A binding. By exploiting this combination of mutations and optimizing the reduction and reoxidation conditions for Fab arm exchange, highly pure monovalent bsAbs can be rapidly purified directly from combined culture media using standard protein A purification. This methodology, reported herein for the first time, allows for the high-throughput generation of monovalent bsAbs, thus increasing the capacity for evaluating monovalent bsAb iterations for therapeutic potential.

Antibody-drug conjugates (ADCs) are a class of biotherapeutic drugs designed as targeted therapies for the treatment of cancer. Among the challenges in generating an effective ADC is the choice of an effective conjugation site on the IgG. One common method to prepare site-specific ADCs is to engineer solvent-accessible cysteine residues into antibodies. Here, we used X-ray diffraction and hydrogen-deuterium exchange mass spectroscopy to analyze the structure and dynamics of such a construct where a cysteine has been inserted after Ser 239 (Fc-239i) in the antibody heavy chain sequence. The crystal structure of this Fc-C239i variant at 0.23 nm resolution shows that the inserted cysteine structurally replaces Ser 239 and that this causes a domino-like backward shift of the local polypeptide, pushing Pro 238 out into the hinge. Proline is unable to substitute conformationally for the wild-type glycine at this position, providing a structural reason for the previously observed abolition of both FcγR binding and antibody-dependent cellular cytotoxicity. Energy estimates for the both the FcγR interface (7 kcal/mol) and for the differential conformation of proline (20 kcal/mol) are consistent with the observed disruption of FcγR binding, providing a quantifiable case where strain at a single residue appears to disrupt a key biological function. Conversely, the structure of Fc-C239i is relatively unchanged at the intersection of the CH2 and CH3 domains; the site known to be involved in binding of the neonatal Fc receptor (FcRn), and an alignment of the Fc-C239i structure with an Fc structure in a ternary Fc:FcRn:HSA (human serum albumin) complex implies that these favorable contacts would be maintained. Hydrogen deuterium exchange mass spectroscopy (HDX-MS) data further suggest a significant increase in conformational mobility for the Fc-C239i protein relative to Fc that is evident even far from the insertion site but still largely confined to the CH2 domain. Together, the findings provide a detailed structural and dynamic basis for previously observed changes in ADC functional binding to FcγR, which may guide further development of ADC designs.

We describe the characterization of antigen binding fragments (Fab)-drug conjugates prepared using a dual maleimide pyrrolobenzodiazepine dimer cytotoxic payload (SG3710). Pyrrolobenzodiazepine dimers, which are DNA cross-linkers, are a class of payloads used in antibody-drug conjugates (ADCs). SG3710 was designed to rebridge two adjacent cysteines, such as those that form the canonical interchain disulfide bond between the light and heavy chain in Fab fragments. The rebridging generated homogenous Fab conjugates, with a drug-to-Fab ratio of one, as demonstrated by the preparation of rebridged Fabs derived from the anti-HER2 trastuzumab antibody and from a negative control antibody both prepared using recombinant expression and papain digestion. The resulting anti-HER2 trastuzumab Fab-rebridged conjugate retained antigen binding, was stable in rat serum, and demonstrated potent and antigen-dependent cancer cell-killing ability. Disulfide rebridging with SG3710 is a generic approach to prepare Fab-pyrrolobenzodiazepine dimer conjugates, which does not require the Fabs to be engineered for conjugation. Thus, SG3710 offers a flexible and straightforward platform for the controlled assembly of pyrrolobenzodiazepine dimer conjugates from any Fab for oncology applications., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Most strategies used to prepare homogeneous site-specific antibody-drug conjugates (ADCs) result in ADCs with a drug-to-antibody ratio (DAR) of two. Here, we report a disulfide re-bridging strategy to prepare homogeneous ADCs with DAR of one using a dual-maleimide pyrrolobenzodiazepine (PBD) dimer (SG3710) and an engineered antibody (Flexmab), which has only one intrachain disulfide bridge at the hinge. We demonstrate that SG3710 efficiently re-bridge a Flexmab targeting human epidermal growth factor receptor 2 (HER2), and the resulting ADC was highly resistant to payload loss in serum and exhibited potent anti-tumor activity in a HER2-positive gastric carcinoma xenograft model. Moreover, this ADC was tolerated in rats at twice the dose compared to a site-specific ADC with DAR of two prepared using a single-maleimide PBD dimer (SG3249). Flexmab technologies, in combination with SG3710, provide a platform for generating site-specific homogenous PBD-based ADCs with DAR of one, which have improved biophysical properties and tolerability compared to conventional site-specific PBD-based ADCs with DAR of two.

Codelivery of multiple therapeutic agents with different anticancer mechanisms can overcome drug resistance as well as generate additive or synergistic anticancer effects that may enhance the antitumor efficacy. Antibody-drug conjugates (ADCs) can be used for highly specific delivery of multiple therapeutic agents with different anticancer mechanisms, though more research is required towards designing flexible platforms on which dual drug ADCs could be prepared. Herein, we describe the synthesis of a heterotrifunctional linker that could be used to construct flexible platforms for preparing dual-cytotoxic drug conjugates in a site-specific manner. As a proof of concept, we synthesized dual drug ADCs carrying monomethyl auristain E (MMAE, tubulin polymerization inhibitor) and pyrrolobenzodiazepine dimer (PBD, DNA minor groove alkylator). We then evaluated the dual drug ADCs for in vitro efficacy and confirmed the dual mechanism of action., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Purpose: Antibody-drug conjugates (ADC) utilizing noncleavable linker drugs have been approved for clinical use, and several are in development targeting solid and hematologic malignancies including multiple myeloma. Currently, there are no reliable biomarkers of activity for these ADCs other than presence of the targeted antigen. We observed that certain cell lines are innately resistant to such ADCs, and sought to uncover the underlying mechanism of resistance., Experimental Design: The expression of 43 lysosomal membrane target genes was evaluated in cell lines resistant to ADCs bearing the noncleavable linker, pyrrolobenzodiazepine payload SG3376, in vitro . The functional relevance of SLC46A3, a lysosomal transporter of noncleavable ADC catabolites whose expression uniquely correlated with SG3376 resistance, was assessed using EPHA2-, HER2-, and BCMA-targeted ADCs and isogenic cells overexpressing or genetically inactivated for SLC46A3 . SLC46A3 expression was also examined in patient-derived xenograft and in vitro models of acquired T-DM1 resistance and multiple myeloma bone marrow samples by RT-PCR., Results: Loss of SLC46A3 expression was found to be a mechanism of innate and acquired resistance to ADCs bearing DM1 and SG3376. Sensitivity was restored in refractory lines upon introduction of SLC46A3 , suggesting that expression of SLC46A3 may be more predictive of activity than target antigen levels alone. Interrogation of primary multiple myeloma samples indicated a range of SLC46A3 expression, including samples with undetectable levels like multiple myeloma cell lines resistant to BCMA-targeting DM1 and SG3376 ADCs., Conclusions: Our findings support SLC46A3 as a potential patient selection biomarker with immediate relevance to clinical trials involving these ADCs., (©2018 American Association for Cancer Research.)

Experimental procedures and 1 H and 13 C NMR of the heterotrifunctional linker used for preparation of dual drug conjugates and PBD payload are included. Procedure for carrying preparation of antibody linker conjugate via thiol maleimide conjugation and antibody drug conjugates (ADCs) using copper assisted click reaction and oxime ligation, their cell viability assay and western blotting procedures of the resultant conjugates are detailed. Also, reduced mass spectroscopy results and in vitro cytotoxicity of antibody drug conjugates used in this article are shown.

Prostate-specific membrane antigen (PSMA) is a membrane-bound glutamate carboxypeptidase that is highly expressed in nearly all prostate cancers with the highest expression in metastatic castration-resistant prostate cancer (mCRPC). The prevalence of increased surface expression and constitutive internalization of PSMA make it an attractive target for an antibody-drug conjugate (ADC) approach to treating patients with mCRPC. MEDI3726 (previously known as ADCT-401) is an ADC consisting of an engineered version of the anti-PSMA antibody J591 site specifically conjugated to the pyrrolobenzodiazepine (PBD) dimer tesirine. MEDI3726 specifically binds the extracellular domain of PSMA and, once internalized, releases the PBD dimer to crosslink DNA and trigger cell death. In vitro , MEDI3726 demonstrated potent and specific cytotoxicity in a panel of PSMA-positive prostate cancer cell lines, consistent with internalization and DNA interstrand crosslinking. In vivo , MEDI3726 showed robust antitumor activity against the LNCaP and the castration-resistant CWR22Rv1 prostate cancer cell line xenografts. MEDI3726 also demonstrated durable antitumor activity in the PSMA-positive human prostate cancer patient-derived xenograft (PDX) LuCaP models. This activity correlated with increased phosphorylated Histone H2AX in tumor xenografts treated with MEDI3726. MEDI3726 is being evaluated in a phase I clinical trial as a treatment for patients with metastatic castrate-resistant prostate cancer (NCT02991911). Mol Cancer Ther; 17(10); 2176-86. ©2018 AACR ., (©2018 American Association for Cancer Research.)

Purpose: To use preclinical models to identify a dosing schedule that improves tolerability of highly potent pyrrolobenzodiazepine dimers (PBDs) antibody drug conjugates (ADCs) without compromising antitumor activity. Experimental Design: A series of dose-fractionation studies were conducted to investigate the pharmacokinetic drivers of safety and efficacy of PBD ADCs in animal models. The exposure-activity relationship was investigated in mouse xenograft models of human prostate cancer, breast cancer, and gastric cancer by comparing antitumor activity after single and fractionated dosing with tumor-targeting ADCs conjugated to SG3249, a potent PBD dimer. The exposure-tolerability relationship was similarly investigated in rat and monkey toxicology studies by comparing tolerability, as assessed by survival, body weight, and organ-specific toxicities, after single and fractionated dosing with ADCs conjugated to SG3249 (rats) or SG3400, a structurally related PBD (monkeys). Results: Observations of similar antitumor activity in mice treated with single or fractionated dosing suggests that antitumor activity of PBD ADCs is more closely related to total exposure (AUC) than peak drug concentrations ( C max ). In contrast, improved survival and reduced toxicity in rats and monkeys treated with a fractionated dosing schedule suggests that tolerability of PBD ADCs is more closely associated with C max than AUC. Conclusions: We provide the first evidence that fractionated dosing can improve preclinical tolerability of at least some PBD ADCs without compromising efficacy. These findings suggest that preclinical exploration of dosing schedule could be an important clinical strategy to improve the therapeutic window of highly potent ADCs and should be investigated further. Clin Cancer Res; 23(19); 5858-68. ©2017 AACR ., (©2017 American Association for Cancer Research.)

Antibody-drug conjugates (ADC) are used to selectively deliver cytotoxic agents to tumors and have the potential for increased clinical benefit to cancer patients. 5T4 is an oncofetal antigen overexpressed on the cell surface in many carcinomas on both bulk tumor cells as well as cancer stem cells (CSC), has very limited normal tissue expression, and can internalize when bound by an antibody. An anti-5T4 antibody was identified and optimized for efficient binding and internalization in a target-specific manner, and engineered cysteines were incorporated into the molecule for site-specific conjugation. ADCs targeting 5T4 were constructed by site-specifically conjugating the antibody with payloads that possess different mechanisms of action, either a DNA cross-linking pyrrolobenzodiazepine (PBD) dimer or a microtubule-destabilizing tubulysin, so that each ADC had a drug:antibody ratio of 2. The resulting ADCs demonstrated significant target-dependent activity in vitro and in vivo ; however, the ADC conjugated with a PBD payload (5T4-PBD) elicited more durable antitumor responses in vivo than the tubulysin conjugate in xenograft models. Likewise, the 5T4-PBD more potently inhibited the growth of 5T4-positive CSCs in vivo , which likely contributed to its superior antitumor activity. Given that the 5T4-PBD possessed both potent antitumor activity as well as anti-CSC activity, and thus could potentially target bulk tumor cells and CSCs in target-positive indications, it was further evaluated in non-GLP rat toxicology studies that demonstrated excellent in vivo stability with an acceptable safety profile. Taken together, these preclinical data support further development of 5T4-PBD, also known as MEDI0641, against 5T4 + cancer indications. Mol Cancer Ther; 16(8); 1576-87. ©2017 AACR ., (©2017 American Association for Cancer Research.)

Immunogenic cell death (ICD) is the process by which certain cytotoxic drugs induce apoptosis of tumor cells in a manner that stimulates the immune system. In this study, we investigated whether antibody-drug conjugates (ADCS) conjugated with pyrrolobenzodiazepine dimer (PBD) or tubulysin payloads induce ICD, modulate the immune microenvironment, and could combine with immuno-oncology drugs to enhance antitumor activity. We show that these payloads on their own induced an immune response that prevented the growth of tumors following subsequent tumor cell challenge. ADCs had greater antitumor activity in immunocompetent versus immunodeficient mice, demonstrating a contribution of the immune system to the antitumor activity of these ADCs. ADCs also induced immunologic memory. In the CT26 model, depletion of CD8 + T cells abrogated the activity of ADCs when used alone or in combination with a PD-L1 antibody, confirming a role for T cells in antitumor activity. Combinations of ADCs with immuno-oncology drugs, including PD-1 or PD-L1 antibodies, OX40 ligand, or GITR ligand fusion proteins, produced synergistic antitumor responses. Importantly, synergy was observed in some cases with suboptimal doses of ADCs, potentially providing an approach to achieve potent antitumor responses while minimizing ADC-induced toxicity. Immunophenotyping studies in different tumor models revealed broad immunomodulation of lymphoid and myeloid cells by ADC and ADC/immuno-oncology combinations. These results suggest that it may be possible to develop novel combinatorial therapies with PBD- and tubulysin-based ADC and immuno-oncology drugs that may increase clinical responses. Cancer Res; 77(10); 2686-98. ©2017 AACR ., (©2017 American Association for Cancer Research.)

Antibody-drug conjugates (ADCs) are a class of biopharmaceuticals that combine the specificity of antibodies with the high-potency of cytotoxic drugs. Engineering cysteine residues in the antibodies using mutagenesis is a common method to prepare site-specific ADCs. With this approach, solvent accessible amino acids in the antibody have been selected for substitution with cysteine for conjugating maleimide-bearing cytotoxic drugs, resulting in homogeneous and stable site-specific ADCs. Here we describe a cysteine engineering approach based on the insertion of cysteines before and after selected sites in the antibody, which can be used for site-specific preparation of ADCs. Cysteine-inserted antibodies have expression level and monomeric content similar to the native antibodies. Conjugation to a pyrrolobenzodiazepine dimer (SG3249) resulted in comparable efficiency of site-specific conjugation between cysteine-inserted and cysteine-substituted antibodies. Cysteine-inserted ADCs were shown to have biophysical properties, FcRn, and antigen binding affinity similar to the cysteine-substituted ADCs. These ADCs were comparable for serum stability to the ADCs prepared using cysteine-mutagenesis and had selective and potent cytotoxicity against human prostate cancer cells. Two of the cysteine-inserted variants abolish binding of the resulting ADCs to FcγRs in vitro, thereby potentially preventing non-target mediated uptake of the ADCs by cells of the innate immune system that express FcγRs, which may result in mitigating off-target toxicities. A selected cysteine-inserted ADC demonstrated potent dose-dependent anti-tumor activity in a xenograph tumor mouse model of human breast adenocarcinoma expressing the oncofetal antigen 5T4.

We developed an IgG1 domain-tethering approach to guide the correct assembly of 2 light and 2 heavy chains, derived from 2 different antibodies, to form bispecific monovalent antibodies in IgG1 format. We show here that assembling 2 different light and heavy chains by sequentially connecting them with protease-cleavable polypeptide linkers results in the generation of monovalent bispecific antibodies that have IgG1 sequence, structure and functional properties. This approach was used to generate a bispecific monovalent antibody targeting the epidermal growth factor receptor and the type I insulin-like growth factor receptor that: 1) can be produced and purified using standard IgG1 techniques; 2) exhibits stability and structural features comparable to IgG1; 3) binds both targets simultaneously; and 4) has potent anti-tumor activity. Our strategy provides new engineering opportunities for bispecific antibody applications, and, most importantly, overcomes some of the limitations (e.g., half-antibody and homodimer formation, light chains mispairing, multi-step purification), inherent with some of the previously described IgG1-based bispecific monovalent antibodies.

By simultaneous binding two disease mediators, bispecific antibodies offer the opportunity to broaden the utility of antibody-based therapies. Herein, we describe the design and characterization of Bs4Ab, an innovative and generic bispecific tetravalent antibody platform. The Bs4Ab format comprises a full-length IgG1 monoclonal antibody with a scFv inserted into the hinge domain. The Bs4Ab design demonstrates robust manufacturability as evidenced by MEDI3902, which is currently in clinical development. To further demonstrate the applicability of the Bs4Ab technology, we describe the molecular engineering, biochemical, biophysical, and in vivo characterization of a bispecific tetravalent Bs4Ab that, by simultaneously binding vascular endothelial growth factor and angiopoietin-2, inhibits their function. We also demonstrate that the Bs4Ab platform allows Fc-engineering similar to that achieved with IgG1 antibodies, such as mutations to extend half-life or modulate effector functions.

Antibody-drug conjugates (ADCs) have become a powerful platform to deliver cytotoxic agents selectively to cancer cells. ADCs have traditionally been prepared by stochastic conjugation of a cytotoxic drug using an antibody's native cysteine or lysine residues. Through strategic selection of the mammalian expression host, we were able to introduce azide-functionalized glycans onto a homogeneously glycosylated anti-EphA2 monoclonal antibody in one step. Conjugation with an alkyne-bearing pyrrolobenzodiazepine dimer payload (SG3364) using copper-catalyzed click chemistry yielded a site-specific ADC with a drug-to-antibody ratio (DAR) of four. This ADC was compared with a glycoengineered DAR two site-specific ADC, and both were found to be highly potent against EphA2-positive human prostate cancer cells in both an in vitro cytotoxicity assay and a murine tumor xenograft model.

Antibody-drug conjugates (ADCs) are among the most promising empowered biologics for cancer treatment. ADCs are commonly prepared by chemical conjugation of small molecule cytotoxic anti-cancer drugs to antibodies through either lysine side chains or cysteine thiols generated by the reduction of interchain disulfide bonds. Both methods yield heterogeneous conjugates with complex biophysical properties and suboptimal serum stability, efficacy, and pharmacokinetics. To limit the complexity of cysteine-based ADCs, we have engineered and characterized in vitro and in vivo antibody cysteine variants that allow precise control of both site of conjugation and drug load per antibody molecule. We demonstrate that the chemically-defined cysteine-engineered antibody-tubulysin conjugates have improved ex vivo and in vivo stability, efficacy, and pharmacokinetics when compared to conventional cysteine-based ADCs with similar drug-to-antibody ratios. In addition, to limit the non-target FcγRs mediated uptake of the ADCs by cells of the innate immune system, which may result in off-target toxicities, the ADCs have been engineered to lack Fc-receptor binding. The strategies described herein are broadly applicable to any full-length IgG or Fc-based ADC and have been incorporated into an ADC that is in phase I clinical development., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Targeted nanomedicines are a promising technology for treatment of disease; however, preparation and characterization of well-defined protein-nanoparticle systems remain challenging. Here, we describe a platform technology to prepare antibody binding fragment (Fab)-bearing nanoparticles and an accompanying real-time cell-based assay to determine their cellular uptake compared to monoclonal antibodies (mAbs) and Fabs. The nanoparticle platform was composed of core-cross-linked polyion complex (PIC) micelles prepared from azide-functionalized PEG-b-poly(amino acids), that is, azido-PEG-b-poly(l-lysine) [N3-PEG-b-PLL] and azido-PEG-b-poly(aspartic acid) [N3-PEG-b-PAsp]. These PIC micelles were 30 nm in size and contained approximately 10 polymers per construct. Fabs were derived from an antibody binding the EphA2 receptor expressed on cancer cells and further engineered to contain a reactive cysteine for site-specific attachment and a cleavable His tag for purification from cell culture expression systems. Azide-functionalized micelles and thiol-containing Fab were linked using a heterobifunctional cross-linker (FPM-PEG4-DBCO) that contained a fluorophenyl-maleimide for stable conjugation to Fabs thiols and a strained alkyne (DBCO) group for coupling to micelle azide groups. Analysis of Fab-PIC micelle conjugates by fluorescence correlation spectroscopy, size exclusion chromatography, and UV-vis absorbance determined that each nanoparticle contained 2-3 Fabs. Evaluation of cellular uptake in receptor positive cancer cells by real-time fluorescence microscopy revealed that targeted Fab-PIC micelles achieved higher cell uptake than mAbs and Fabs, demonstrating the utility of this approach to identify targeted nanoparticle constructs with unique cellular internalization properties.

In recent years, biodistribution analyses of pharmaceutical compounds in preclinical animal models have become an integral part of drug development. Here we report on the use of optical imaging biodistribution analyses in a mouse xenograft model to identify tissues that nonspecifically retained a bispecific antibody under development. Although our bispecific antibody bound both the epidermal growth factor receptor and insulin growth factor 1 receptor are expressed on H358, nonsmall-cell lung carcinoma cells, the fluorescence from labeled bispecific antibody was less intense than expected in xenografted tumors. Imaging analyses of live mice and major organs revealed that the majority of the Alexa Fluor 750 labeled bispecific antibody was sequestered in the liver within 2 h of injection. However, results varied depending on which near-infrared fluorophore was used, and fluorescence from the livers of mice injected with bispecific antibody labeled with Alexa Fluor 680 was less pronounced than those labeled with Alexa Fluor 750. The tissue distribution of control antibodies remained unaffected by label and suggests that the retention of fluorophores in the liver may differ. Given these precautions, these results support the incorporation of optical imaging biodistribution analyses in biotherapeutic development strategies.

Antibody-drug conjugate (ADC) which delivers cytotoxic drugs specifically into targeted cells through internalization and lysosomal trafficking has emerged as an effective cancer therapy. We show that a bivalent biparatopic antibody targeting two non-overlapping epitopes on HER2 can induce HER2 receptor clustering, which in turn promotes robust internalization, lysosomal trafficking, and degradation. When conjugated with a tubulysin-based microtubule inhibitor, the biparatopic ADC demonstrates superior anti-tumor activity over ado-trastuzumab emtansine (T-DM1) in tumor models representing various patient subpopulations, including T-DM1 eligible, T-DM1 ineligible, and T-DM1 relapsed/refractory. Our findings indicate that this biparatopic ADC has promising potential as an effective therapy for metastatic breast cancer and a broader patient population may benefit from this unique HER2-targeting ADC., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Targeting multiple receptors with bispecific antibodies is a novel approach that may prevent the development of resistance to cancer treatments. Despite the initial promise, full clinical benefit of this technology has yet to be realized. We hypothesized that in order to optimally exploit bispecific antibody technology, thorough fundamental knowledge of their pharmacological properties compared to that of single agent combinations was needed. Therefore, we developed a mathematical model for the binding of bispecific antibodies to their targets that accounts for the spatial distribution of the binding receptors and the kinetics of binding, and is scalable for increasing valency. The model provided an adequate description of internal and literature-reported in vitro data on bispecific binding. Simulations of in vitro binding with the model indicated that bispecific antibodies are not always superior in their binding potency to combination of antibodies, and the affinity of bispecific arms must be optimized for maximum binding potency. Our results suggest that this tool can be used for the design and development of the next generation of anti-cancer bispecific compounds.

Maleimides are often used to covalently attach drugs to cysteine thiols for production of antibody-drug conjugates (ADCs). However, ADCs formed with traditional N-alkyl maleimides have variable stability in the bloodstream leading to loss of drug. Here, we report that N-aryl maleimides form stable antibody conjugates under very mild conditions while also maintaining high conjugation efficiency. Thiol-maleimide coupling and ADC stabilization via thiosuccinimide hydrolysis were accelerated by addition of N-phenyl or N-fluorophenyl groups to the ring-head nitrogen. Cysteine-linked ADCs prepared with N-aryl maleimides exhibited less than 20% deconjugation in both thiol-containing buffer and serum when incubated at 37 °C over a period of 7 days, whereas the analogous ADCs prepared with N-alkyl maleimides showed 35-67% deconjugation under the same conditions. ADCs prepared with the anticancer drug N-phenyl maleimide monomethyl-auristatin-E (MMAE) maintained high cytotoxicity following long-term exposure to serum whereas the N-alkyl maleimide MMAE ADC lost potency over time. These data demonstrate that N-aryl maleimides are a convenient and flexible platform to improve the stability of ADCs through manipulation of functional groups attached to the maleimide ring-head nitrogen., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Antibody-drug conjugates (ADCs) have emerged as an important class of therapeutics for cancer treatment that combine the target specificity of antibodies with the killing activity of anticancer chemotherapeutics. Early conjugation technologies relied upon random conjugation to either lysine or cysteine residues, resulting in heterogeneous ADCs. Recent technology advancements have resulted in the preparation of homogeneous ADCs through the site-specific conjugation at engineered cysteines, glycosylated amino acids, and bioorthogonal unnatural amino acids. Here we describe for the first time the conjugation of an anti-mitotic drug to an antibody following the mild and selective oxidation of a serine residue engineered at the N-terminus of the light chain. Using an alkoxyamine-derivatized monomethyl auristatine E payload, we have prepared a hydrolytically stable ADC that retains binding to its antigen and displays potent in vitro cytotoxicity and in vivo tumor growth inhibition.

Targeting Eph (erythropoietin producing hepatoma) receptors with monoclonal antibodies is being explored as therapy for several types of cancer. To test whether simultaneous targeting of EphA2, EphA4, and EphB4 would be an effective approach to cancer therapy, we generated a recombinant trispecific antibody using the variable domain genes of anti-EphA2, anti-EphA4, and anti-EphB4 monoclonal antibodies. A multidisciplinary approach combining biochemical, biophysical, and cellular-based assays was used to characterize the trispecific antibody in vitro and in vivo. Here we demonstrate that the trispecific antibody is expressed at high levels by mammalian cells, monodispersed in solution, thermostable, capable of simultaneously binding the three receptors, and able to activate the three targets effectively as evidenced by receptor internalization and degradation both in vitro and in vivo. Furthermore, pharmacokinetic analysis using tumor-bearing nude mice showed that the trispecific antibody remains in the circulation similarly to its respective parental antibodies. These results indicate that simultaneous blockade of EphA2, EphA4, and EphB4 could be an attractive approach to cancer therapy.

Widespread drug resistance due to empiric use of broad-spectrum antibiotics has stimulated development of bacteria-specific strategies for prophylaxis and therapy based on modern monoclonal antibody (mAb) technologies. However, single-mechanism mAb approaches have not provided adequate protective activity in the clinic. We constructed multifunctional bispecific antibodies, each conferring three mechanisms of action against the bacterial pathogen Pseudomonas aeruginosa by targeting the serotype-independent type III secretion system (injectisome) virulence factor PcrV and persistence factor Psl exopolysaccharide. A new bispecific antibody platform, BiS4, exhibited superior synergistic protection against P. aeruginosa-induced murine pneumonia compared to parent mAb combinations or other available bispecific antibody structures. BiS4αPa was protective in several mouse infection models against disparate P. aeruginosa strains and unexpectedly further synergized with multiple antibiotic classes even against drug-resistant clinical isolates. In addition to resulting in a multimechanistic clinical candidate (MEDI3902) for the prevention or treatment of P. aeruginosa infections, these antibody studies suggest that multifunctional antibody approaches may be a promising platform for targeting other antibiotic-resistant bacterial pathogens., (Copyright © 2014, American Association for the Advancement of Science.)

B cell activation is regulated by a variety of signals. CD19 positively regulates B cell activation, augmenting signals delivered through the BCR complex. In contrast, CD32b contains an ITIM and negatively regulates BCR signaling. Importantly, there are drugs currently in clinical trials and preclinical development that cross-link CD32b to molecules within the BCR complex. We wanted to address how single engagement versus cotargeting these molecules affects human B cell function. When B cells from healthy individuals were activated by signals that mimic a T cell response (IL-21 costimulation), ligation of CD32b, but not CD19, inhibited B cell expansion and plasma cell (PC) differentiation. In contrast, when B cells were activated through TLR, anti-CD19, but not anti-CD32b, blunted the response. However, when both CD19 and CD32b were coengaged by a bispecific anti-CD19×CD32b Ab, both types of stimuli were potently inhibited. Cross-linking CD19 with CD32b also inhibited Ab-independent functions of B cells, such as HLA upregulation, cytokine production, and the ability of B cells to prime CD4(+) T cells. Finally, although cross-linking CD19 and CD32b inhibited PC differentiation of primary B cells, it did not alter Ig production from pre-established PCs. These data elucidate the mechanism by which a complex set of signals determines the fate of B cell responsiveness. Although signals through CD19 influence TLR-driven activation, CD32b impacts the magnitude of the response following IL-21 costimulation. Therefore, simultaneous targeting of multiple surface molecules may be a necessary approach to comprehensively modulate B cell activation in vivo.

Monoclonal antibodies are traditionally used to block the function of a specific target in a given disease. However, some diseases are the consequence of multiple components or pathways and not the result of a single mediator; thus, blocking at a single point may not optimally control disease. Antibodies that simultaneously block the functions of two or more disease-associated targets are now being developed. Herein, we describe the design, expression, and characterization of several oligospecific antibody formats that are capable of binding simultaneously to two or three different antigens. These constructs were generated by genetically linking single-chain Fv fragments to the N-terminus of the antibody heavy and light chains and to the C-terminus of the antibody C(H)3 domain. The oligospecific antibodies were expressed in mammalian cells, purified to homogeneity, and characterized for binding to antigens, Fcgamma receptors, FcRn, and C1q. In addition, the oligospecific antibodies were assayed for effector function, protease susceptibility, thermal stability, and size distribution. We demonstrate that these oligospecific antibody formats maintain high expression level, thermostability, and protease resistance. The in vivo half-life, antibody-dependent cellular cytotoxicity function, and binding ability to Fcgamma receptors and C1q of the test oligospecific antibodies remain similar to the corresponding properties of their parental IgG antibodies. The excellent expression, biophysical stability, and potential manufacturing feasibility of these multispecific antibody formats suggest that they will provide a scaffold template for the construction of similar molecules to target multiple antigens in complex diseases.

The Grb2-related adaptor protein GADS plays a central role during the initial phases of signal transduction in T lymphocytes. GADS possesses N- and C-terminal Src homology 3 (SH3) domains flanking a central Src homology 2 (SH2) domain and a 126-residue region rich in glutamine and proline residues, presumed to be largely unstructured. The SH2 domain of GADS binds the adaptor protein LAT; the C-terminal SH3 domain pairs GADS to the adaptor protein SLP-76, whereas the function of the central region is unknown. High-resolution three-dimensional models are available for the isolated SH2 and C-terminal SH3 domains in complex with their respective binding partners, LAT and SLP-76. However, in part because of its intrinsic instability, there is no structural information for the entire GADS molecule. Here, we report the low-resolution structure of full-length GADS in solution using small-angle x-ray scattering (SAXS). Based on the SAXS data, complemented by gel filtration experiments, we show that full-length GADS is monomeric in solution and that its overall structural parameters are smaller than those expected for a protein with a long unstructured region. Ab initio and rigid body modeling of the SAXS data reveal that full-length GADS is a relatively compact molecule and that the potentially unstructured region retains a significant degree of structural order. The biological function of GADS is discussed based on its overall structure.

The immune receptors expressed on myeloid cells (IREM) are type I transmembrane proteins encoded on human chromosome 17 (17q25.1), whose function is believed to be important in controlling inflammation. To date, three IREM receptors have been identified. IREM-1 functions as an inhibitory receptor, whereas IREM-2 and IREM-3 serve an activating function. Here, we report the crystal structure of IREM-1 extracellular domain at 2.6 A resolution. The overall fold of IREM-1 resembles that of a V-type immunoglobulin domain, and reveals overall close homology with immunoglobulin domains from other immunoreceptors such as CLM-1, TREM-1, TLT-1 and NKp44. Comparing the surface electrostatic potential and hydrophobicity of IREM-1 with its murine homologous CLM-1, we observed unique structural properties for the complementary determining region of IREM-1, which suggests that they may be involved in recognition of the IREM-1 ligand. Particularly interesting is the structural conformation and physical properties of the antibody's equivalent CDR3 loop, which we show to be a structurally variable region of the molecule and therefore could be the main structural determinant for ligand discrimination and binding. In addition, the analysis of the IREM-1 structure revealed the presence of four structurally different cavities. Three of these cavities form a continuous hydrophobic groove on the IREM-1 surface, which point to a region of the molecule capable of accommodating potential ligands.