Search

The approaches to forensic human identification (HID) are largely comparative in nature, relying upon the comparison of short tandem repeat profiles to known reference materials and/or database profiles. However, many profiles are generated from evidence materials that either do not have a reference material for comparison or do not produce a database hit. As an alternative to individualizing analysis for HID, researchers of forensic DNA have demonstrated that the human epigenome can provide a wealth of information. However, epigenetic analysis requires sodium b̲is̲ulfite c̲onversion (BSC), a sample preparation method that is time-consuming, labor-intensive, prone to contamination, and characterized by DNA loss and fragmentation. To provide an alternative method for BSC that is more amenable to integration with the forensic DNA workflow, we describe a rotationally-driven, microfluidic method for dynamic solid phase-BSC (dSP-BSC) that streamlines the sample preparation process in an automated format, capable of preparing up to four samples in parallel. The method permitted decreased incubation intervals by ∼36% and was assessed for relative DNA recovery and conversion efficiency and compared to gold-standard and enzymatic approaches.

We report clear proof-of-principle for centrifugally-driven, multiplexed, paper-based orthogonal flow sandwich-style immunocapture (cOFI) and colorimetric detection of Zaire Ebola virus-like particles. Capture antibodies are immobilized onto nanoporous nitrocellulose membranes that are then laminated into polymeric microfluidic discs to yield ready-to-use analytical devices. Fluid flow is controlled solely by rotational speed, obviating the need for complex pneumatic pumping systems, and providing more precise flow control than with the capillary-driven flow used in traditional lateral flow immunoassays (LFIs). Samples containing the antigen of interest and gold nanoparticle-labeled detection antibodies are pumped centrifugally through the embedded, prefunctionalized membrane where they are subsequently captured to generate a positive, colorimetric signal. When compared to the equivalent LFI counterparts, this cOFI approach generated immunochromatographic colorimetric responses that are objectively darker (saturation), more intense (grayscale), and less variable regarding total area of the color response. We also describe an image analysis approach that enables access to rich color data and area statistics without the need for a commercial 'strip reader' or custom-written image analysis algorithms. Instead, our analytical method exploits inexpensive equipment ( e.g. , smart phone, flatbed scanner, etc. ) and freely available software (Fiji distribution of ImageJ) to permit characterization of immunochromatographic responses that includes multiple color metrics, offering insights beyond typical grayscale analysis. The findings reported here stand as clear proof-of-principle for the feasibility of disc-based, centrifugally driven orthogonal flow through a membrane with immunocapture (cOFI) and colorimetric readout of a sandwich-type immunoassay in less than 15 minutes. Once fully developed, this cOFI platform could render a faster, more accurate diagnosis, while processing multiple samples simul-taneously.

Rotationally-driven lab-on-a-disc (LoaD) microfluidic systems are among the most promising methods for realizing complex nucleic acid (NA) testing at the point-of-need (PoN). However, despite significant advancements in NA amplification methods, very few sample-to-answer centrifugal microfluidic platforms have been realized due, in part, to a lack of on-disc sample preparation. In many instances, NA extraction (NAE) and/or lysis must be performed off-disc using conventional laboratory equipment and methods, thus tethering the assay to centralized facilities. Omission of in-line cellular lysis and NAE can be partially attributed to the nature of centrifugally-driven fluidics. Since flow is directed radially outward relative to the center of rotation (CoR), the number of possible sequential unit operations is limited by the disc radius. To address this, we report a simple, practical, automatable, and easy-to-implement method for inward fluid displacement (IFD) compatible with downstream nucleic acid amplification tests (NAATs). This approach leverages carbon dioxide (CO 2 ) gas generated from on-board acid-base neutralization to drive liquid from the disc periphery towards the CoR. Large architectural features or highly corrosive chemicals required in other approaches were replaced with safe-to-handle IFD reagents that maintained their reactivity for at least six months of storage on-disc. Further, spatiotemporal control over neutralization initiation and containment of the resultant pneumatic pressure head was reliably achieved using a single diode for both laser-actuated valve opening and channel sealing, which eliminated the need for manual intervention (e.g., taping over vents) required in other IFD methods. Following initial characterization via dye recovery studies, we demonstrated for the first time that CO 2 -driven displacement does not inhibit downstream NAATs; NAs isolated direct-from-swab on disc were compatible with both 'gold standard' polymerase chain reaction (PCR) techniques and loop-mediated isothermal amplification (LAMP). The IFD approach described here stands to significantly ease integration of an increased number of sequential on-board processes, including cellular lysis, nucleic acid extraction, amplification, and detection, to greatly lower barriers towards automatable sample-to-answer LoaDs amenable for use on-site operation by non-technical personnel., (Copyright © 2022 Elsevier B.V. All rights reserved.)

To bring to bear the power of centrifugal microfluidics on vertical flow immunoassays, control of flow orthogonally through nanoporous membranes is essential. The on-disc approach described here leverages the rapid print-cut-laminate (PCL) disc fabrication and prototyping method to create a permanent seal between disc materials and embedded nanoporous membranes. Rotational forces drive fluid flow, replacing capillary action, and complex pneumatic pumping systems. Adjacent microfluidic features form a flow path that directs fluid orthogonally (vertically) through these embedded membranes during assay execution. This method for membrane incorporation circumvents the need for solvents (e.g., acetone) to create the membrane-disc bond and sidesteps issues related to undesirable bypass flow. In other recently published work, we described an orthogonal flow (OF) platform that exploited embedded membranes for automation of enzyme-linked immunosorbent assays (ELISAs). Here, we more fully characterize flow patterns and cellulosic membrane behavior within the centrifugal orthogonal flow (cOF) format. Specifically, high-speed videography studies demonstrate that sample volume, membrane pore size, and ionic composition of the sample matrix significantly impact membrane behavior, and consequently fluid drainage profiles, especially when cellulosic membranes are used. Finally, prototype discs are used to demonstrate proof-of-principle for sandwich-type antigen capture and immunodetection within the cOF system.

The diversification of analytical tools for diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is imperative for effective virus surveillance and transmission control worldwide. Development of robust methods for rapid, simple isolation of viral RNA permits more expedient pathogen detection by downstream real-time reverse transcriptase polymerase chain reaction (real-time RT-PCR) to minimize stalled containment and enhance treatment efforts. Here, we describe an automatable rotationally driven microfluidic platform for enrichment and enzymatic extraction of SARS-CoV-2 RNA from multiple sample types. The multiplexed, enclosed microfluidic centrifugal device (μCD) is capable of preparing amplification-ready RNA from up to six samples in under 15 min, minimizing user intervention and limiting analyst exposure to pathogens. Sample enrichment leverages Nanotrap Magnetic Virus Particles to isolate intact SARS-CoV-2 virions from nasopharyngeal and/or saliva samples, enabling the removal of complex matrices that inhibit downstream RNA amplification and detection. Subsequently, viral capsids are lysed using an enzymatic lysis cocktail for release of pathogenic nucleic acids into a PCR-compatible buffer, obviating the need for downstream purification. Early in-tube assay characterization demonstrated comparable performance between our technique and a "gold-standard" commercial RNA extraction and purification kit. RNA obtained using the fully integrated μCDs permitted reliable SARS-CoV-2 detection by real-time RT-PCR. Notably, we successfully analyzed full-process controls, positive clinical nasopharyngeal swabs suspended in viral transport media, and spiked saliva samples, showcasing the method's broad applicability with multiple sample matrices commonly encountered in clinical diagnostics.

Increased opioid use and misuse have imposed large analytical demands across clinical and forensic sectors. Due to the absence of affordable, accurate, and simple on-site tests (e.g., point of interdiction and bedside), analysis is primarily conducted in centralized laboratories via time-consuming, labor-intensive methods. Many healthcare facilities do not have such analytical capabilities and must send samples to commercial laboratories, increasing turnaround time and care costs, as well as delaying public health warnings regarding the emergence of specific substances. Enzyme-linked immunosorbent assays (ELISAs) are used ubiquitously, despite lengthy workflows that require substantial manual intervention. Faster, reliable analytics are desperately needed to mitigate the mortality and morbidity associated with the current substance use epidemic. We describe one such alternative─a portable centrifugal microfluidic ELISA system that supplants repetitive pipetting with rotationally controlled fluidics. Embedded cellulosic membranes act as microvalves, permitting flow only when centrifugally generated hydraulic pressure exceeds their liquid entry pressure. These features enable stepwise reagent introduction, incubation, and removal simply by tuning rotational frequency. We demonstrate the success of this platform through sensitive, specific colorimetric detection of opiates, a subclass of opioids naturally derived from the opium poppy. Objective image analysis eliminated subjectivity in human color perception and permitted reliable detection of opiates in buffer and artificial urine at the ng/μL range. Opiates were clearly differentiated from other drug classes without interference from common adulterants known to cause false positive results in current colorimetric field tests. Eight samples were simultaneously analyzed in under 1 h, a marked reduction from the traditional multiday timeline. This approach could permit rapid, automatable ELISA-based drug detection outside of traditional laboratories by nontechnical personnel.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a zoonotic RNA virus characterized by high transmission rates and pathogenicity worldwide. Continued control of the COVID-19 pandemic requires the diversification of rapid, easy to use, sensitive, and portable methods for SARS-CoV-2 sample preparation and analysis. Here, we propose a method for SARS-CoV-2 viral enrichment and enzymatic extraction of RNA from clinically relevant matrices in under 10 min. This technique utilizes affinity-capture hydrogel particles to concentrate SARS-CoV-2 from solution, and leverages existing PDQeX technology for RNA isolation. Characterization of our method is accomplished with reverse transcription real-time polymerase chain reaction (RT-PCR) for relative, comparative RNA detection. In a double-blind study analyzing viral transport media (VTM) obtained from clinical nasopharyngeal swabs, our sample preparation method demonstrated both comparable results to a routinely used commercial extraction kit and 100% concordance with laboratory diagnoses. Compatibility of eluates with alternative forms of analysis was confirmed using microfluidic RT-PCR (μRT-PCR), recombinase polymerase amplification (RPA), and loop-mediated isothermal amplification (LAMP). The alternative methods explored here conveyed successful amplification from all RNA eluates originating from positive clinical samples. Finally, this method demonstrated high performance within a saliva matrix across a broad range of viral titers and dilutions up to 90% saliva matrix, and sets the stage for miniaturization to the microscale., Competing Interests: Declaration of competing interest This work was sponsored by MicroGEM USA, will be available to them for licensing from the University of Virginia, and the PI has an equity interest in this entity., (Copyright © 2021. Published by Elsevier B.V.)

This report describes the development of a centrifugally controlled microfluidic dynamic solid-phase extraction (dSPE) platform to reliably obtain amplification-ready nucleic acids (NAs) directly from buccal swab cuttings. To our knowledge, this work represents the first centrifugal microdevice for comprehensive preparation of high-purity NAs from raw buccal swab samples. Direct-from-swab cellular lysis was integrated upstream of NA extraction, and automatable laser-controlled on-board microvalving strategies provided the strict spatiotemporal fluidic control required for practical point-of-need use. Solid-phase manipulation during extraction leveraged the application of a bidirectional rotating magnetic field to promote thorough interaction with the sample (e.g., NA capture). We illustrate the broad utility of this technology by establishing downstream compatibility of extracted nucleic acids with three noteworthy assays, namely, the polymerase chain reaction (PCR), reverse transcriptase PCR (RT-qPCR), and loop-mediated isothermal amplification (LAMP). The PCR-readiness of the extracted DNA was confirmed by generating short tandem repeat (STR) profiles following multiplexed amplification. With no changes to assay workflow, viral RNA was successfully extracted from contrived (spiked) SARS-CoV-2 swab samples, confirmed by RT-qPCR. Finally, we demonstrate the compatibility of the extracted DNA with LAMP-a technique well suited for point-of-need genetic analysis due to minimal hardware requirements and compatibility with colorimetric readout. We describe an automatable, portable microfluidic platform for the nucleic acid preparation device that could permit practical, in situ use by nontechnical personnel.

Recently, there has been an explosion of scientific literature describing the use of colorimetry for monitoring the progression or the endpoint result of colorimetric reactions. The availability of inexpensive imaging technology (e.g., scanners, Raspberry Pi, smartphones and other sub-$50 digital cameras) has lowered the barrier to accessing cost-efficient, objective detection methodologies. However, to exploit these imaging devices as low-cost colorimetric detectors, it is paramount that they interface with flexible software that is capable of image segmentation and probing a variety of color spaces (RGB, HSB, Y'UV, L*a*b*, etc.). Development of tailor-made software (e.g., smartphone applications) for advanced image analysis requires complex, custom-written processing algorithms, advanced computer programming knowledge and/or expertise in physics, mathematics, pattern recognition and computer vision and learning. Freeware programs, such as ImageJ, offer an alternative, affordable path to robust image analysis. Here we describe a protocol that uses the ImageJ program to process images of colorimetric experiments. In practice, this protocol consists of three distinct workflow options. This protocol is accessible to uninitiated users with little experience in image processing or color science and does not require fluorescence signals, expensive imaging equipment or custom-written algorithms. We anticipate that total analysis time per region of interest is ~6 min for new users and <3 min for experienced users, although initial color threshold determination might take longer.

Microvalving is a pivotal component in many microfluidic lab-on-a-chip platforms and micro-total analysis systems (μTAS). Effective valving is essential for the integration of multiple unit operations, such as, liquid transport, mixing, aliquoting, metering, washing, and fractionation. The ideal microfluidic system integrates numerous, sequential unit operations, provides precise spaciotemporal reagent release and flow control, and is amenable to rapid, low-cost fabrication and prototyping. Centrifugal microfluidics is an attractive approach that minimizes the need for supporting peripheral hardware. However, many of the microfluidic valving methods described in the literature suffer from operational limitations and fail when high rotational frequencies or pressure heads are required early in the analytical process. Current approaches to valve closure add unnecessary complexity to the microfluidic architecture, require the incorporation of additional materials such as wax, and entail extra fabrication steps or processes. Herein we report the characterization and optimization of a laser-actuated, closable valve method for polymeric microfluidic devices that ameliorates these shortcomings. Under typical operational conditions (rcf ≤605 ×g) a success rate >99% was observed, i.e. successful valve closures remained leak free through 605 ×g. Implementation of the laser-actuated closable valving system is demonstrated on an automated, centrifugally driven dynamic solid phase extraction (dSPE) device. Compatibility of this laser-actuated valve closure approach with commercially available polymerase chain reaction (PCR) assays is established by the generation of full 18-plex STR profiles from DNA purified via on-disc dSPE. This novel approach promises to simplify microscale valving, improve functionality by increasing the number of integrated unit operations, and allow for the automation of progressively complex biochemical assays.