Search

We present the discovery of TOI-6303b and TOI-6330b, two massive transiting super-Jupiters orbiting a M0 and a M2 star respectively, as part of the Searching for GEMS survey. These were detected by TESS and then confirmed via ground-based photometry and radial velocity observations with the Habitable-zone Planet Finder (HPF). TOI-6303b has a mass of 7.84 +/- 0.31 MJ, a radius of 1.03 +/- 0.06 RJ , and an orbital period of 9.485 days. TOI-6330b has a mass of 10.00 +/- 0.31 MJ , a radius of 0.97 +/- 0.03 RJ , and an orbital period of 6.850 days. We put these planets in context of super-Jupiters around M-dwarfs discovered from radial-velocity surveys, as well as recent discoveries from astrometry. These planets have masses that can be attributed to two dominant planet formation mechanisms - gravitational instability and core-accretion. Their masses necessitate massive protoplanetary disks that should either be gravitationally unstable, i.e. forming through gravitational instability, or be amongst some of the most massive protoplanetary disks to form objects through core-accretion. We also discuss the eccentricity distribution of these objects, as a potential indicator of their formation and evolutionary mechanisms., Comment: arXiv admin note: text overlap with arXiv:2408.14694

Gaia astrometry of nearby stars is precise enough to detect the tiny displacements induced by substellar companions, but radial velocity data are needed for definitive confirmation. Here we present radial velocity follow-up observations of 28 M and K stars with candidate astrometric substellar companions, which led to the confirmation of two systems, Gaia-4b and Gaia-5b, and the refutation of 21 systems as stellar binaries. Gaia-4b is a massive planet ($M = 11.8 \pm 0.7 \:\mathrm{M_J}$) in a $P = 571.3 \pm 1.4\:\mathrm{day}$ orbit with a projected semi-major axis $a_0=0.312 \pm 0.040\:\mathrm{mas}$ orbiting a $0.644 \pm 0.02 \:\mathrm{M_\odot}$ star. Gaia-5b is a brown dwarf ($M = 20.9 \pm 0.5\:\mathrm{M_J}$) in a $P = 358.58 \pm 0.19\:\mathrm{days}$ eccentric $e=0.6412 \pm 0.0027$ orbit with a projected angular semi-major axis of $a_0 = 0.947 \pm 0.038\:\mathrm{mas}$ around a $0.34 \pm 0.03 \mathrm{M_\odot}$ star. Gaia-4b is one of the first exoplanets discovered via the astrometric technique, and is one of the most massive planets known to orbit a low-mass star., Comment: Submitted to AAS journals. 26 pages, 12 figures, 4 tables

Disk-integrated observations of the Sun provide a unique vantage point to explore stellar activity and its effect on measured radial velocities. Here, we report a new approach for disk-integrated solar spectroscopy and evaluate its capabilities for solar radial velocity measurements. Our approach is based on a near-infrared laser heterodyne radiometer (LHR) combined with an optical frequency comb calibration, and we show that this combination enables precision, disk-integrated solar spectroscopy with high spectral resolution (~800,000), high signal-to-noise ratio (~2,600), and absolute frequency accuracy. We use the comb-calibrated LHR to record spectra of the solar Fe I 1565 nm transition over a six-week period. We show that our measurements reach sub-meter-per-second radial velocity precision over a single day, and we use daily measurements of the absolute line center to assess the long-term stability of the comb-calibrated LHR approach. We use this long-duration dataset to quantify the principal uncertainty sources that impact the measured radial velocities, and we discuss future modifications that can further improve this approach in studies of stellar variability and its impact on radial velocity measurements.

Compact photonic systems that offer high frequency stability and low noise are of increasing importance to applications in precision metrology, quantum computing, communication, and advanced sensing technologies. However, on-chip resonators comprised of dielectrics cannot match the frequency stability and noise characteristics of Fabry-Perot cavities, whose electromagnetic modes live almost entirely in vacuum. In this study, we present a novel strategy to interface micro-fabricated Fabry-Perot cavities with photonic integrated circuits to realize compact, high-performance integrated systems. Using this new integration approach, we demonstrate self-injection locking of an on-chip laser to a milimeter-scale vacuum-gap Fabry-Perot using a circuit interface that transforms the reflected cavity response to enable efficient feedback to the laser. This system achieves a phase noise of -97 dBc/Hz at 10 kHz offset frequency, a fractional frequency stability of 5*10-13 at 10 ms, a 150 Hz 1/pi integral linewidth, and a 35 mHz fundamental linewidth. We also present a complementary integration strategy that utilizes a vertical emission grating coupler and a back-reflection cancellation circuit to realize a fully co-integrated module that effectively redirects the reflected signals and isolates back-reflections with a 10 dB suppression ratio, readily adaptable for on-chip PDH locking. Together, these demonstrations significantly enhance the precision and functionality of RF photonic systems, paving the way for continued advancements in photonic applications.

We report on the discovery of a transiting giant planet around the 3500 K M3-dwarf star TOI-6383A located 172 pc from Earth. It was detected by the Transiting Exoplanet Survey Satellite (TESS) and confirmed by a combination of ground-based follow-up photometry and precise radial velocity measurements. This planet has an orbital period of $\sim$1.791 days, mass of 1.040$\pm$0.094 $M_J$ and a radius of 1d.008$^{+0.036}_{-0.033} ~R_J$, resulting in a mean bulk density of 1.26$^{+0.18}_{-0.17}$ g cm$^{-3}$. TOI-6383A has an M-dwarf companion star, TOI-6383B, which has a stellar effective temperature $T_{eff}$ $\sim$ 3100 K and a projected orbital separation of 3100 AU. TOI-6383A is a low-mass dwarf star hosting a giant planet and is an intriguing object for planetary evolution studies due to its high planet-to-star mass ratio. This discovery is part of the \textit{Searching for Giant Exoplanets around M-dwarf Stars (GEMS)} Survey, intending to provide robust and accurate estimates of the occurrence of GEMS and the statistics on their physical and orbital parameters. This paper presents an interesting addition to the small number of confirmed GEMS, particularly notable since its formation necessitates massive, ust-rich protoplanetary discs and high accretion efficiency ($>$ 10\%)., Comment: 20 pages, 8 figures

We introduce a new parallelized approach to photothermal microscopy that utilizes mid-infrared dual-comb lasers, enabling simultaneous measurements at hundreds of wavelengths. This technology allows for high-speed, label-free chemical identification with super-resolution infrared imaging, overcoming the limitations of slow, single-wavelength-laser methods.

A resonant electro-optic (EO) frequency comb is generated through electro-optic modulation of laser light within an optical resonator. Compared to cavity-less EO combs generated in a single pass through a modulator, resonant EO combs can produce broader spectra with lower radio frequency (RF) power and offer a measure of noise filtering beyond the cavity's linewidth. Understanding, measuring, and suppressing the sources of phase noise in resonant EO combs is crucial for their applications in metrology, astrophotonics, optical clock generation, and fiber-optic communication. According to the standard phase noise model of frequency combs, only two variables - the common mode offset and repetition rate phase noise - are needed to fully describe the phase noise of comb lines. However, in this work we demonstrate analytically, numerically, and experimentally that this standard model breaks down for resonant EO combs at short timescales (high frequencies) and under certain comb parameters. Specifically, a third phase noise component emerges. Consequently, resonant EO combs feature qualitatively different phase noise from their cavity-less counterparts and may not exhibit the anticipated noise filtering. A more complete description of the deviations from the standard phase noise model is critical to accurately predict the performance of frequency combs. The description presented here paves the way for improved designs tailored to applications such as super-continuum generation and optical communication.

We present the discovery of a low-density planet transiting TOI-5688 A b, a high-metallicity M2V star. This planet was discovered as part of the search for transiting giant planets ($R \gtrsim8$ M$_\oplus$) through the Searching for GEMS (Giant Exoplanets around M-dwarf Stars) survey. The planet TOI-5688 A b was discovered with the Transiting Exoplanet Survey Satellite (TESS), and characterized with ground-based transits from Red Buttes Observatory (RBO), the Table Mountain Observatory of Pomona College, and radial velocity (RV) measurements with the Habitable-Zone Planet Finder (HPF) on the 10 m Hobby Eberly Telescope (HET) and NEID on the WIYN 3.5 m telescope. From the joint fit of transit and RV data, the mass of the planet is $124\pm24$ M$_\oplus$ and the radius is $10.4\pm0.7$ R$_\oplus$. This planet has a density of $0.61^{+0.20}_{-0.15}$ g/cm${}^3$, and is on a $\sim2.95$ day orbit around its host star. The spectroscopic and photometric analysis of the host star TOI-5688 A shows that it is a high metallicity ([Fe/H] $ = 0.47\pm0.16$ dex) M2V star, favoring the core-accretion formation pathway as the likely formation scenario for this planet. In this paper, we analyze potential mechanisms of planet formation in the context of the formation of TOI-5688 A b. Additionally, observations with Gaia suggest the presence of a wide-separation binary companion, TOI-5688 B, which has a projected separation of $\sim5"$ (1110 AU) and is an M4V. This makes TOI-5688 A b part of a growing number of GEMS in wide-separation binary systems., Comment: 20 pages, 7 figures, Submitted to AJ, Comments are welcome

Laser spectroscopy and interferometry have provided an unparalleled view into the fundamental nature of matter and the universe through ultra-precise measurements of atomic transition frequencies and gravitational waves. Optical frequency combs have expanded metrology capabilities by phase-coherently bridging radio frequency and optical domains to enable traceable high-resolution spectroscopy across bandwidths greater than hundreds of terahertz. However, quantum mechanics limits the measurement precision achievable with laser frequency combs and traditional laser sources, ultimately impacting fundamental interferometry and spectroscopy. Squeezing the distribution of quantum noise to enhance measurement precision of either the amplitude or phase quadrature of an optical field leads to significant measurement improvements with continuous wave lasers. In this work, we generate bright amplitude-squeezed frequency comb light and apply it to molecular spectroscopy using interferometry that leverages the high-speed and broad spectral coverage of the dual-comb technique. Using the Kerr effect in nonlinear optical fiber, the amplitude quadrature of a frequency comb centered at 1560 nm is squeezed by >3 dB over a 2.5 THz of bandwidth that includes 2500 comb teeth spaced by 1 GHz. Interferometry with a second coherent state frequency comb yields mode-resolved spectroscopy of hydrogen sulfide gas with a signal-to-noise ratio (SNR) nearly 3 dB beyond the shot noise limit, taking full metrological advantage of the amplitude squeezing when the electrical noise floor is considered. The quantum noise reduction leads to a two-fold quantum speedup in the determination of gas concentration, with impact for fast, broadband, and high SNR ratio measurements of multiple species in dynamic chemical environments., Comment: 31 pages, 12 figures

Transiting giant exoplanets around M-dwarf stars (GEMS) are rare, owing to the low-mass host stars. However, the all-sky coverage of TESS has enabled the detection of an increasingly large number of them to enable statistical surveys like the \textit{Searching for GEMS} survey. As part of this endeavour, we describe the observations of six transiting giant planets, which includes precise mass measurements for two GEMS (K2-419Ab, TOI-6034b) and statistical validation for four systems, which includes validation and mass upper limits for three of them (TOI-5218b, TOI-5616b, TOI-5634Ab), while the fourth one -- TOI-5414b is classified as a `likely planet'. Our observations include radial velocities from the Habitable-zone Planet Finder on the Hobby-Eberly Telescope, and MAROON-X on Gemini-North, along with photometry and high-contrast imaging from multiple ground-based facilities. In addition to TESS photometry, K2-419Ab was also observed and statistically validated as part of the K2 mission in Campaigns 5 and 18, which provides precise orbital and planetary constraints despite the faint host star and long orbital period of $\sim 20.4$ days. With an equilibrium temperature of only 380 K, K2-419Ab is one of the coolest known well-characterized transiting planets. TOI-6034 has a late F-type companion about 40\arcsec~away, making it the first GEMS host star to have an earlier main-sequence binary companion. These confirmations add to the existing small sample of confirmed transiting GEMS., Comment: Accepted in AJ

The search for earth-like exoplanets with the Doppler radial velocity technique is an extremely challenging and multifaceted precision spectroscopy problem. Currently, one of the limiting instrumental factors in reaching the required long-term $10^{-10}$ level of radial velocity precision is the defect-driven sub-pixel quantum efficiency variations in the large-format detector arrays used by precision echelle spectrographs. Tunable frequency comb calibration sources that can fully map the point spread function across a spectrograph's entire bandwidth are necessary for quantifying and correcting these detector artifacts. In this work, we demonstrate a combination of laser frequency and mode spacing control that allows full and deterministic tunability of a 30 GHz electro-optic comb together with its filter cavity. After supercontinuum generation, this gives access to any optical frequency across 700 - 1300 nm. Our specific implementation is intended for the comb deployed at the Habitable Zone Planet Finder spectrograph and its near-infrared Hawaii-2RG array, but the techniques apply to all laser frequency combs used for precision astronomical spectrograph calibration and other applications that require broadband tuning., Comment: 6 pages, 5 figures

Mid-infrared microscopy is an important tool for biological analyses, allowing a direct probe of molecular bonds in their low energy landscape. In addition to the label-free extraction of spectroscopic information, the application of broadband sources can provide a third dimension of chemical specificity. However, to enable widespread deployment, mid-infrared microscopy platforms need to be compact and robust while offering high speed, broad bandwidth and high signal-to-noise ratio (SNR). In this study, we experimentally showcase the integration of a broadband, high-repetition-rate dual-comb spectrometer (DCS) in the mid-infrared range with a scanning microscope. We employ a set of 1-GHz mid-infrared frequency combs, demonstrating their capability for high-speed and broadband hyperspectral imaging of polymers and ovarian tissue. The system covers 1000 $\mathrm{cm^{-1}}$ at $\mathrm{\nu_c=2941 \; cm^{-1}}$ with 12.86 kHz spectra acquisition rate and 5 $\mathrm{\mu m}$ spatial resolution. Taken together, our experiments and analysis elucidate the trade-off between bandwidth and speed in DCS as it relates to microscopy. This provides a roadmap for the future advancement and application of high-repetition-rate DCS hyperspectral imaging.

We demonstrate a vacuum-gap ultrastable optical reference cavity that does not require a vacuum enclosure. Our simple method of optical contact bonding in a vacuum environment allows for cavity operation in air while maintaining vacuum between the cavity mirrors. Vacuum is maintained long term, with no observed degradation in cavity stability for over 1 year after bonding. For a 1550 nm laser stabilized to a 9.7 mL in-vacuum bonded cavity, the measured Allan deviation is $2.4\times 10^{-14}$ at 1 s and its phase noise is thermal-noise-limited from 0.1 Hz to 10 kHz, reaching about -105 dBc/Hz at 10 kHz offset frequency. This represents the highest stability of any oscillator operated without a vacuum enclosure. Furthermore, we demonstrate a 0.5 mL in-vacuum bonded cavity created using microfabricated mirrors and cavity dicing, with phase noise reaching -95 dBc/Hz at 10 kHz offset frequency. By relieving the need for high-vacuum enclosures, we greatly enhance the portability and utility of low noise, compact cavity-stabilized lasers, with applications ranging from environmental sensing to mobile optical clocks to ultralow noise microwave generation., Comment: 10 pages, 6 figures

The detection of light of thermal origin is the principal means by which humanity has learned about our world and the cosmos. In optical astronomy, in particular, direct detection of thermal photons and the resolution of their spectra have enabled discoveries of the broadest scope and impact. Such measurements, however, do not capture the phase of the thermal fields--a parameter that has proven crucial to transformative techniques in radio astronomy such as synthetic aperture imaging. Over the last 25 years, tremendous progress has occurred in laser science, notably in the phase-sensitive, broad bandwidth, high resolution, and traceable spectroscopy enabled by the optical frequency comb. In this work, we directly connect the fields of frequency comb laser spectroscopy and passive optical sensing as applied to astronomy, remote sensing, and atmospheric science. We provide fundamental sensitivity analysis of dual-comb correlation spectroscopy (DCCS), whereby broadband thermal light is measured via interferometry with two optical frequency combs. We define and experimentally verify the sensitivity scaling of DCCS at black body temperatures relevant for astrophysical observations. Moreover, we provide comparison with direct detection techniques and more conventional laser heterodyne radiometry. Our work provides the foundation for future exploration of comb-based broadband synthetic aperture hyperspectral imaging across the infrared and optical spectrum., Comment: 54 pages, 7 figures

Next-generation communications, radar and navigation systems will extend and exploit the higher bandwidth of the millimeter-wave domain for increased communication data rates as well as radar with higher sensitivity and increased spatial resolution. However, realizing these advantages will require the generation of millimeter-wave signals with low phase noise in simple and compact form-factors. The rapidly developing field of photonic integration addresses this challenge and provides a path toward simplified and portable, low-noise mm-wave generation for these applications. We leverage these advances by heterodyning two silicon photonic chip lasers, phase-locked to the same miniature Fabry-Perot (F-P) cavity to demonstrate a simple framework for generating low-noise millimeter-waves with phase noise below the thermal limit of the F-P cavity. Specifically, we generate 94.5 GHz and 118.1 GHz millimeter-wave signals with phase noise of -117 dBc/Hz at 10 kHz offset, decreasing to -120 dBc/Hz at 40 kHz offset, a record low value for such photonic devices. We achieve this with existing technologies that can be integrated into a platform less than $\approx$ 10 mL in volume. Our work illustrates the significant potential and advantages of low size, weight, and power (SWaP) photonic-sourced mm-waves for communications and sensing., Comment: 5 pages, 4 figures

Modern communication, navigation, and radar systems rely on low noise and frequency-agile microwave sources. In this application space, photonic systems provide an attractive alternative to conventional microwave synthesis by leveraging high spectral purity lasers and optical frequency combs to generate microwaves with exceedingly low phase noise. However, these photonic techniques suffer from a lack of frequency tunability, and also have substantial size, weight, and power requirements that largely limit their use to laboratory settings. In this work, we address these shortcomings with a hybrid opto-electronic approach that combines simplified optical frequency division with direct digital synthesis to produce tunable low-phase-noise microwaves across the entire X-band. This results in exceptional phase noise at 10 GHz of -156 dBc/Hz at 10 kHz offset and fractional frequency instability of 1x10^-13 at 0.1 s. Spot tuning away from 10 GHz by 500 MHz, 1 GHz, and 2 GHz, yields phase noise at 10 kHz offset of -150 dBc/Hz, -146 dBc/Hz, and -140 dBc/Hz, respectively. The synthesizer architecture is fully compatible with integrated photonic implementations that will enable a versatile microwave source in a chip-scale package. Together, these advances illustrate an impactful and practical synthesis technique that shares the combined benefits of low timing noise provided by photonics and the frequency agility of established digital synthesis.

We applied a tabletop, ultrafast, high-harmonic generation (HHG) source to measure the element-specific ferromagnetic resonance (FMR) in ultra-thin magnetic alloys and multilayers on an opaque Si substrate. We demonstrate a continuous wave bandwidth of 62 GHz, with promise to extend to 100 GHz or higher. This laboratory-scale instrument detects the FMR using ultrafast, extreme ultraviolet (EUV) light, with photon energies spanning the M-edges of most relevant magnetic elements. An RF frequency comb generator is used to produce a microwave excitation that is intrinsically synchronized to the EUV pulses with a timing jitter of 1.1 ps or better. We apply this system to measure the dynamics in a multilayer system as well as Ni-Fe and Co-Fe alloys. Since this instrument operates in reflection-mode, it is a milestone toward measuring and imaging the dynamics of the magnetic state and spin transport of active devices on arbitrary and opaque substrates. The higher bandwidth also enables measurements of materials with high magnetic anisotropy, as well as ferrimagnets, antiferromagnets, and short-wavelength (high wavevector) spinwaves in nanostructures or nanodevices. Furthermore, the coherence and short wavelength of the EUV will enable extending these studies using dynamic nanoscale lensless imaging techniques such as coherent diffractive imaging, ptychography, and holography.

Dual-comb spectroscopy in the ultraviolet (UV) and visible would enable broad bandwidth electronic spectroscopy with unprecedented frequency resolution. However, there are significant challenges in generation, detection and processing of dual-comb data that have restricted its progress in this spectral region. In this work, we leverage robust 1550 nm few-cycle pulses to generate frequency combs in the UV-visible. We couple this source to a wavelength multiplexed dual-comb spectrometer and simultaneously retrieve 100 MHz comb-mode-resolved spectra over three distinct harmonics spanning 380-800 nm. The experiments highlight the path to continuous dual-comb coverage spanning 200-750 nm, offering extensive access to electronic transitions in atoms, molecules, and solids.

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms., Comment: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

The unique benefits of Fabry-P\'erot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and timekeeping systems, it will be necessary to develop strategies to integrate compact Fabry-P\'erot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry-P\'erot resonators with a silicon photonic circuit. This circuit interface produces spatial separation of the incident and reflected waves, as required for on-chip Pound-Drever-Hall frequency locking, while also suppressing unwanted back reflections from the Fabry-P\'erot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.

We report the discovery of a close-in ($P_{\mathrm{orb}} = 3.349\:\mathrm{days}$) warm Neptune with clear transit timing variations (TTVs) orbiting the nearby ($d=47.3\:\mathrm{pc}$) active M4 star, TOI-2015. We characterize the planet's properties using TESS photometry, precise near-infrared radial velocities (RV) with the Habitable-zone Planet Finder (HP) Spectrograph, ground-based photometry, and high-contrast imaging. A joint photometry and RV fit yields a radius $R_p~=~3.37_{-0.20}^{+0.15} \:\mathrm{R_\oplus}$, mass $m_p~=~16.4_{-4.1}^{+4.1}\:\mathrm{M_\oplus}$, and density $\rho_p~=~2.32_{-0.37}^{+0.38} \:\mathrm{g cm^{-3}}$ for TOI-2015b, suggesting a likely volatile-rich planet. The young, active host star has a rotation period of $P_{\mathrm{rot}}~=~8.7 \pm~0.9~\mathrm{days}$ and associated rotation-based age estimate of $1.1~\pm~0.1\:\mathrm{Gyr}$. Though no other transiting planets are seen in the TESS data, the system shows clear TTVs of super period $P_{\mathrm{sup}}~\approx~430\:\mathrm{days}$ and amplitude $\sim$$100\:\mathrm{minutes}$. After considering multiple likely period ratio models, we show an outer planet candidate near a 2:1 resonance can explain the observed TTVs while offering a dynamically stable solution. However, other possible two-planet solutions -- including 3:2 and 4:3 resonance -- cannot be conclusively excluded without further observations. Assuming a 2:1 resonance in the joint TTV-RV modeling suggests a mass of $m_b~=~13.3_{-4.5}^{+4.7}\:\mathrm{M_\oplus}$ for TOI-2015b and $m_c~=~6.8_{-2.3}^{+3.5}\:\mathrm{M_\oplus}$ for the outer candidate. Additional transit and RV observations will be beneficial to explicitly identify the resonance and further characterize the properties of the system., Comment: 29 pages, 15 figures, 6 tables. Accepted for publication in The Astronomical Journal

The fields of precision timekeeping and spectroscopy increasingly rely on optical frequency comb interferometry. However, comb-based measurements are not described by existing quantum theory because they exhibit both large mode mismatch and finite strength local oscillators. To establish this quantum theory, we derive measurement operators for homodyne detection with arbitrary mode overlap. These operators are a combination of quadrature and intensity-like measurements, which inform a filter that maximizes the quadrature measurement signal-to-noise ratio. Furthermore, these operators establish a foundation to extend frequency-comb interferometry to a wide range of scenarios, including metrology with nonclassical states of light., Comment: 6 pages plus appendices

NEID is a high-resolution red-optical precision radial velocity (RV) spectrograph recently commissioned at the WIYN 3.5 m telescope at Kitt Peak National Observatory, Arizona, USA. NEID has an extremely stable environmental control system, and spans a wavelength range of 380 to 930 nm with two observing modes: a High Resolution (HR) mode at R $\sim$ 112,000 for maximum RV precision, and a High Efficiency (HE) mode at R $\sim$ 72,000 for faint targets. In this manuscript we present a detailed description of the components of NEID's optical fiber feed, which include the instrument, exposure meter, calibration system, and telescope fibers. Many parts of the optical fiber feed can lead to uncalibratable RV errors, which cannot be corrected for using a stable wavelength reference source. We show how these errors directly cascade down to performance requirements on the fiber feed and the scrambling system. We detail the design, assembly, and testing of each component. Designed and built from the bottom-up with a single-visit instrument precision requirement of 27 $\textrm{cm~s}^{-1}$, close attention was paid to the error contribution from each NEID subsystem. Finally, we include the lab and on-sky tests performed during instrument commissioning to test the illumination stability, and discuss the path to achieving the instrumental stability required to search for a true Earth twin around a Solar-type star., Comment: The Astronomical Journal, Volume 166, Number 3, 2023

Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are difficult to further reduce in size and power consumption. Our work addresses this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division. Narrow linewidth self-injection locked integrated lasers are stabilized to a miniature Fabry-P\'{e}rot cavity, and the frequency gap between the lasers is divided with an efficient dark-soliton frequency comb. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc/Hz at 100 Hz offset frequency that decreases to -135 dBc/Hz at 10 kHz offset--values which are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.

We report precision atmospheric spectroscopy of $CO_2$ using a laser heterodyne radiometer (LHR) calibrated with an optical frequency comb. Using the comb-calibrated LHR, we record spectra of atmospheric $CO_2$ near 1572.33 nm with a spectral resolution of 200 MHz using sunlight as a light source. The measured $CO_2$ spectra exhibit frequency shifts by approximately 11 MHz over the course of the five-hour measurement, and we show that these shifts are caused by Doppler effects due to wind along the spectrometer line of sight. The measured frequency shifts are in excellent agreement with an atmospheric model, and we show that our measurements track the wind-induced Doppler shifts with a relative frequency precision of 100 kHz (15 cm/s), equivalent to a fractional precision of a few parts in $10^{10}$. These results demonstrate that frequency-comb-calibrated LHR enables precision velocimetry that can be of use in applications ranging from climate science to astronomy., Comment: 4 pages, 3 figures

Molecular diagnostics are a primary tool of modern chemistry, enabling researchers to map chemical reaction pathways and rates to better design and control chemical systems. Many chemical reactions are complex and fast, and existing diagnostic approaches provide incomplete information. For example, mass spectrometry is optimized to gather snapshots of the presence of many chemical species, while conventional laser spectroscopy can quantify a single chemical species through time. Here we optimize for multiple objectives by introducing a high-speed and broadband, mid-infrared dual frequency comb absorption spectrometer. The optical bandwidth of >1000 cm-1 covers absorption fingerprints of many species with spectral resolution <0.03 cm-1 to accurately discern their absolute quantities. Key to this advance are 1 GHz pulse repetition rate frequency combs covering the 3-5 um region that enable microsecond tracking of fast chemical process dynamics. We demonstrate this system to quantify the abundances and temperatures of each species in the complete reactants-to-products breakdown of 1,3,5-trioxane, which exhibits a formaldehyde decomposition pathway that is critical to modern low temperature combustion systems. By maximizing the number of observed species and improving the accuracy of temperature and concentration measurements, this spectrometer advances understanding of chemical reaction pathways and rates and opens the door for novel developments such as combining high-speed chemistry with machine learning.

We present an in-vacuum bonded, 9.7 mL-volume Fabry-P\'erot ultrastable optical reference cavity that operates without a vacuum enclosure. A laser stabilized to the cavity demonstrates low, thermal noise-limited phase noise and 5x10^{-14} Allan deviation at 1 second., Comment: Submitted to IEEE Photonics Conference 2023

The introduction of nonlinear nanophotonic devices to the field of optical frequency comb metrology has enabled new opportunities for low-power and chip-integrated clocks, high-precision frequency synthesis, and broad bandwidth spectroscopy. However, most of these advances remain constrained to the near-infrared region of the spectrum, which has restricted the integration of frequency combs with numerous quantum and atomic systems in the ultraviolet and visible. Here, we overcome this shortcoming with the introduction of multi-segment nanophotonic thin-film lithium niobate (LN) waveguides that combine engineered dispersion and chirped quasi-phase matching for efficient supercontinuum generation via the combination of $\chi^{(2)}$ and $\chi^{(3)}$ nonlinearities. With only 90 pJ of pulse energy at 1550 nm, we achieve gap-free frequency comb coverage spanning 330 to 2400 nm. The conversion efficiency from the near-infrared pump to the UV-Visible region of 350-550 nm is nearly 20%. Harmonic generation via the $\chi^{(2)}$ nonlinearity in the same waveguide directly yields the carrier-envelope offset frequency and a means to verify the comb coherence at wavelengths as short as 350 nm. Our results provide an integrated photonics approach to create visible and UV frequency combs that will impact precision spectroscopy, quantum information processing, and optical clock applications in this important spectral window.

In current theories of planet formation, close-orbiting planets as massive as Neptune are expected to be very rare around low-mass stars. We report the discovery of a Neptune-mass planet orbiting the `ultracool' star LHS 3154, which is nine times less massive than the Sun. The planet's orbital period is 3.7 days and its minimum mass is 13.2 Earth masses, giving it the largest known planet-to-star mass ratio among short-period planets ($<$\,100 days) orbiting ultracool stars. Both the core accretion and gravitational instability theories for planet formation struggle to account for this system. In the core-accretion scenario, in particular, the dust mass of the protoplanetary disk would need to be an order of magnitude higher than typically seen in protoplanetary disk observations of ultracool stars., Comment: Original Manuscript as submitted to Science on Oct 17, 2022. In review

Frequency combs with mode spacing in the range of 10 to 20 gigahertz (GHz) are critical for increasingly important applications such as astronomical spectrograph calibration, high-speed dual-comb spectroscopy, and low-noise microwave generation. While electro-optic modulators and microresonators can provide narrowband comb sources at this repetition rate, a significant remaining challenge is a means to produce pulses with sufficient peak power to initiate nonlinear supercontinuum generation spanning hundreds of terahertz (THz) as required for self-referencing in these applications. Here, we provide a simple, robust, and universal solution to this problem using off-the-shelf polarization-maintaining (PM) amplification and nonlinear fiber components. This fiber-integrated approach for nonlinear temporal compression and supercontinuum generation is demonstrated with a resonant electro-optic frequency comb at 1550 nm. We show how to readily achieve pulses shorter than 60 fs at a repetition rate of 20 GHz and with peak powers in excess of 2 kW. The same technique can be applied to picosecond pulses at 10 GHz to demonstrate temporal compression by a factor of 9x yielding 50 fs pulses with peak power of 5.5 kW. These compressed pulses enable flat supercontinuum generation spanning more than 600 nm after propagation through multi-segment dispersion-tailored anomalous-dispersion highly nonlinear fiber (HNLF) or tantala waveguides. The same 10 GHz source can readily achieve an octave-spanning spectrum for self-referencing in dispersion-engineered silicon nitride waveguides. This simple all-fiber approach to nonlinear spectral broadening fills a critical gap for transforming any narrowband 10 to 20 GHz frequency comb into a broadband spectrum for a wide range of applications that benefit from the high pulse rate and require access to the individual comb modes., Comment: 15 pages, 11 figures

We confirm the planetary nature of two gas giants discovered by TESS to transit M dwarfs with stellar companions at wide separations. TOI-3984 A ($J=11.93$) is an M4 dwarf hosting a short-period ($4.353326 \pm 0.000005$ days) gas giant ($M_p=0.14\pm0.03~\mathrm{M_{J}}$ and $R_p=0.71\pm0.02~\mathrm{R_{J}}$) with a wide separation white dwarf companion. TOI-5293 A ($J=12.47$) is an M3 dwarf hosting a short-period ($2.930289 \pm 0.000004$ days) gas giant ($M_p=0.54\pm0.07~\mathrm{M_{J}}$ and $R_p=1.06\pm0.04~\mathrm{R_{J}}$) with a wide separation M dwarf companion. We characterize both systems using a combination of ground-based and space-based photometry, speckle imaging, and high-precision radial velocities from the Habitable-zone Planet Finder and NEID spectrographs. TOI-3984 A b ($T_{eq}=563\pm15$ K and $\mathrm{TSM}=138_{-27}^{+29}$) and TOI-5293 A b ($T_{eq}=675_{-30}^{+42}$ K and $\mathrm{TSM}=92\pm14$) are two of the coolest gas giants among the population of hot Jupiter-sized gas planets orbiting M dwarfs and are favorable targets for atmospheric characterization of temperate gas giants and three-dimensional obliquity measurements to probe system architecture and migration scenarios., Comment: Published in AJ, 46 pages, 16 figures, 6 tables, updated to reflect published version. arXiv admin note: substantial text overlap with arXiv:2201.09963

We perform an in-depth analysis of the recently validated TOI-3884 system, an M4 dwarf star with a transiting super-Neptune. Using high precision light curves obtained with the 3.5 m Apache Point Observatory and radial velocity observations with the Habitable-zone Planet Finder (HPF), we derive a planetary mass of 32.6 +7.3 -7.4 Earth Masses and radius of 6.4 +/- 0.2 Earth Radii. We detect a distinct star spot crossing event occurring just after ingress and spanning half the transit for every transit. We determine this spot feature to be wavelength-dependent with the amplitude and duration evolving slightly over time. Best-fit star spot models show that TOI-3884b possesses a misaligned ($\lambda$ = 75 +\- 10 degrees) orbit which crosses a giant pole-spot. This system presents a rare opportunity for studies into the nature of both a misaligned super-Neptune and spot evolution on an active mid-M dwarf., Comment: Accepted to AJ

TOI-1899 b is a rare exoplanet, a temperate Warm Jupiter orbiting an M-dwarf, first discovered by Ca\~nas et al. (2020) from a TESS single-transit event. Using new radial velocities (RVs) from the precision RV spectrographs HPF and NEID, along with additional TESS photometry and ground-based transit follow-up, we are able to derive a much more precise orbital period of $P = 29.090312_{-0.000035}^{+0.000036}$ d, along with a radius of $R_p = 0.99 \pm 0.03~R_J$. We have also improved the constraints on planet mass, $M_p = 0.67 \pm 0.04~M_J$, and eccentricity, which is consistent with a circular orbit at 2$\sigma$ ($e = 0.044_{-0.027}^{+0.029}$). TOI-1899 b occupies a unique region of parameter space as the coolest known ($T_{eq} \approx$ 380 K) Jovian-sized transiting planet around an M-dwarf; we show that it has great potential to provide clues regarding the formation and migration mechanisms of these rare gas giants through transmission spectroscopy with JWST as well as studies of tidal evolution., Comment: 28 pages, 15 figures, 3 tables, accepted to AJ

We develop and demonstrate a compact (less than $6$ mL) portable Fabry-P\'{e}rot optical reference cavity. A laser locked to the cavity is thermal noise limited at $2\times10^{-14}$ fractional frequency stability. Broadband feedback control with an electro-optic modulator enables near thermal-noise-limited phase noise performance from $1$ Hz to $10$ kHz offset frequencies. The additional low vibration, temperature, and holding force sensitivity of our design makes it well suited for out-of-the-lab applications such as optically derived low noise microwave generation, compact and mobile optical atomic clocks, and environmental sensing through deployed fiber networks., Comment: 12 pages, 6 figures

The possibility of an Earth-Sun analog beyond our solar system is one of the most longstanding questions in science. At present, answering this question embodies an extremely difficult measurement problem that requires multiple coordinated advances in astronomical telescopes, fiber optics, precision spectrographs, large format detector arrays, and advanced data processing. Taken together, addressing this challenge will require the measurement and calibration of shifts in stellar spectra at the 10^-10 level over multi-year periods. The potential for such precision has recently been advanced by the introduction of laser frequency combs (LFCs) to the field of precision astronomical spectroscopy. However, the expense, complexity and lack of full spectral coverage of LFCs has limited their widespread use and ultimate impact. To address this issue, we explore simple and robust white-light-illuminated Fabry-Perot (FP) etalons as spectral calibrators for precise radial velocity measurements. We track the frequencies of up to 13,000 etalon modes of the installed FPs from two state-of-the-art astronomical spectrographs. Combining these measurements with modeling, we trace unexpected chromatic variations of the FP modes to sub-picometer changes in the dielectric layers of the broad bandwidth FP mirrors. This yields the determination of the frequencies of the FP modes with precision approaching 10^-11/day, equivalent to a radial velocity (RV) Doppler shift of 3 mm/s/day. These results represent critical progress in precision RV measurements on two fronts: first, they make FP etalons a more powerful stand-alone calibration tool, and second, they demonstrate the capability of LFCs to extend cm/s level RV measurement precision over periods approaching a year. Together, these advances highlight a path to achieving spectroscopic calibration at levels that will be critical for finding earths like our own., Comment: 12 pages, 4 figures

We present the discovery of TOI-5205~b, a transiting Jovian planet orbiting a solar metallicity M4V star, which was discovered using Transiting Exoplanet Survey Satellite photometry and then confirmed using a combination of precise radial velocities, ground-based photometry, spectra, and speckle imaging. TOI-5205~b has one of the highest mass ratios for M dwarf planets with a mass ratio of almost 0.3$\%$, as it orbits a host star that is just $0.392 \pm 0.015$ \solmass{}. Its planetary radius is $1.03 \pm 0.03~R_J$, while the mass is $1.08 \pm 0.06~M_J$. Additionally, the large size of the planet orbiting a small star results in a transit depth of $\sim 7\%$, making it one of the deepest transits of a confirmed exoplanet orbiting a main-sequence star. The large transit depth makes TOI-5205~b a compelling target to probe its atmospheric properties, as a means of tracing the potential formation pathways. While there have been radial-velocity-only discoveries of giant planets around mid-M dwarfs, this is the first transiting Jupiter with a mass measurement discovered around such a low-mass host star. The high mass of TOI-5205~b stretches conventional theories of planet formation and disk scaling relations that cannot easily recreate the conditions required to form such planets., Comment: Accepted in AJ. arXiv admin note: text overlap with arXiv:2203.07178

Non-perturbative and phase-sensitive light-matter interactions have led to the generation of attosecond pulses of light and the control electrical currents on the same timescale. Traditionally, probing these effects via high harmonic generation has involved complicated lasers and apparatuses to generate the few-cycle and high peak power pulses needed to obtain and measure spectra that are sensitive to the phase of the light wave. Instead, we show that nonlinear effects dependent on the carrier-envelope phase can be accessed in solid state crystals with simple low-energy frequency combs that we combine with high-sensitivity demodulation techniques to measure harmonic spectral modulations. Central to this advance is the use of a scalable 100 MHz Erbium-fiber frequency comb at 1550 nm to produce 10 nJ, 20 fs pulses which are focused to the TW/cm2 level. In a single pass through a 500 {\mu}m ZnO crystal this yields harmonic spectra as short as 200 nm. With this system, we introduce a technique of carrier-envelope amplitude modulation spectroscopy (CAMS) and use it to characterize the phase-sensitive modulation of the ultraviolet harmonics with 85 dB signal-to-noise ratio. We further verify the non-perturbative nature of the harmonic generation through polarization gating of the driving pulse to increase the effects of the carrier-envelope phase. Our work demonstrates robust and ultra-sensitive methods for generating and characterizing harmonic generation at 100 MHz rates that should provide advantages in the study of attosecond nonlinear processes in solid state systems. Additionally, as a simple and low-noise frequency comb, this broadband source will be useful for precision dual-comb spectroscopy of a range of physical systems across the ultraviolet and visible spectral regions (200 - 650 nm)., Comment: 12 pages, 7 figures

We present the validation of two planets orbiting M dwarfs, TOI-1696b and TOI-2136b. Both planets are mini-Neptunes orbiting nearby stars, making them promising prospects for atmospheric characterization with the James Webb Space Telescope. We validated the planetary nature of both candidates using high contrast imaging, ground-based photometry, and near-infrared radial velocities. Adaptive Optics images were taken using the ShARCS camera on the 3 m Shane Telescope. Speckle images were taken using the NN-Explore Exoplanet Stellar Speckle Imager on the WIYN 3.5 m telescope. Radii and orbital ephemerides were refined using a combination of TESS, the diffuser-assisted ARCTIC imager on the 3.5m ARC telescope at Apache Point Observatory, and the 0.6 m telescope at Red Buttes Observatory. We obtained radial velocities using the Habitable-Zone Planet Finder on the 10 m Hobby-Eberly Telescope, which enabled us to place upper limits on the masses of both transiting planets. TOI-1696b (P = 2.5 days; R$_{p}$ = 3.24 R$_{\oplus}$; M$_{p}$ $<$ 56.6 M$_{\oplus}$) falls into a sparsely-populated region of parameter space considering its host star's temperature (T$_{\rm{eff}}$ = 3168 K, M4.5), as planets of its size are quite rare around mid to late M dwarfs. On the other hand, TOI-2136b (P = 7.85 days; R$_{p}$ = 2.09 R$_{\oplus}$; M$_{p}$ $<$ 15.0 M$_{\oplus}$) is an excellent candidate for atmospheric follow-up with JWST., Comment: Accepted for Publication in the Astronomical Journal

Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekeeping, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities, where increased size is leveraged to improve noise performance, but with the trade-off of cost, hand assembly, and limited application environments. On the other hand, planar waveguide lasers and cavities exploit the benefits of CMOS scalability but are fundamentally limited from achieving hertz-level linewidths at longer times by stochastic noise and thermal sensitivity inherent to the waveguide medium. These physical limits have inhibited the development of compact laser systems with frequency noise required for portable optical clocks that have performance well beyond conventional microwave counterparts. In this work, we break this paradigm to demonstrate a compact, high-coherence laser system at 1548 nm with a 1 s integrated linewidth of 1.1 Hz and fractional frequency instability less than 10$^{-14}$ from 1 ms to 1 s. The frequency noise at 1 Hz offset is suppressed by 11 orders of magnitude from that of the free-running diode laser down to the cavity thermal noise limit near 1 Hz$^2$/Hz, decreasing to 10$^{-3}$ Hz$^2$/Hz at 4 kHz offset. This low noise performance leverages wafer-scale integrated lasers together with an 8 mL vacuum-gap cavity that employs micro-fabricated mirrors with sub-angstrom roughness to yield an optical $Q$ of 11.8 billion. Significantly, all the critical components are lithographically defined on planar substrates and hold the potential for parallel high-volume manufacturing. Consequently, this work provides an important advance towards compact lasers with hertz-level linewidths for applications such as portable optical clocks, low-noise RF photonic oscillators, and related communication and navigation systems.

The Fabry-P\'erot resonator is one of the most widely used optical devices, enabling scientific and technological breakthroughs in diverse fields including cavity QED, optical clocks, precision length metrology and spectroscopy. Though resonator designs vary widely, all high-end applications benefit from mirrors with the lowest loss and highest finesse possible. Fabrication of the highest finesse mirrors relies on centuries-old mechanical polishing techniques, which offer losses at the part-per-million (ppm) level. However, no existing fabrication techniques are able to produce high finesse resonators with the large range of mirror geometries needed for scalable quantum devices and next-generation compact atomic clocks. In this paper, we introduce a new and scalable approach to fabricate mirrors with ultrahigh finesse ($\geq 10^{6}$) and user-defined radius of curvature spanning four orders of magnitude ($10^{-4}-10^{0}$ m). We employ photoresist reflow and reactive ion etching to shape and transfer mirror templates onto a substrate while maintaining sub-Angstrom roughness. This substrate is coated with a dielectric stack and used to create arrays of compact Fabry-P\'erot resonators with finesse values as high as 1.3 million and measured excess loss $<$ 1 ppm. Optical ringdown measurements of 43 devices across 5 substrates reveal that the fabricated cavity mirrors -- with both small and large radii of curvature -- produce an average coating-limited finesse of 1.05 million. This versatile new approach opens the door to scalable fabrication of high-finesse miniaturized Fabry-P\'erot cavities needed for emerging quantum optics and frequency metrology technologies., Comment: 16 pages, 9 figures

Lasers stabilized to vacuum-gap Fabry-P\'erot optical reference cavities display extraordinarily low noise and high stability, with linewidths much less than 1 Hz. These lasers can expand into new applications and ubiquitous use with the development of compact, portable cavities that are manufacturable at scale. Here we demonstrate an 8 mL volume Fabry-P\'erot cavity constructed with mirrors that are fabricated lithographically with finesse near 1 million. A laser locked to the cavity exhibits phase noise limited by the cavity thermal noise for offset frequencies ranging from 1 Hz to $\approx$ 1 kHz, with a fractional frequency stability of 7$\times$10$^{-15}$ at 1 second. Furthermore, the use of microfabricated mirrors allows us to expand the design space of centimeter-scale cavities, and we explore the noise implications of pushing towards cavity volumes of 2 mL or less., Comment: 7 pages, 4 figures

We present the discovery of a new Jovian-sized planet, TOI-3757 b, the lowest density planet orbiting an M dwarf (M0V). It orbits a solar-metallicity M dwarf discovered using TESS photometry and confirmed with precise radial velocities (RV) from HPF and NEID. With a planetary radius of $12.0^{+0.4}_{-0.5}$ $R_{\oplus}$ and mass of $85.3^{+8.8}_{-8.7}$ $M_{\oplus}$, not only does this object add to the small sample of gas giants ($\sim 10$) around M dwarfs, but also, its low density ($\rho =$ $0.27^{+0.05}_{-0.04}$ $\textrm{g~cm}^{-3}$) provides an opportunity to test theories of planet formation. We present two hypotheses to explain its low density; first, we posit that the low metallicity of its stellar host ($\sim$ 0.3 dex lower than the median metallicity of M dwarfs hosting gas giants) could have played a role in the delayed formation of a solid core massive enough to initiate runaway accretion. Second, using the eccentricity estimate of $0.14 \pm 0.06$ we determine it is also plausible for tidal heating to at least partially be responsible for inflating the radius of TOI-3757b b. The low density and large scale height of TOI-3757 b makes it an excellent target for transmission spectroscopy studies of atmospheric escape and composition (TSM $\sim$ 190). We use HPF to perform transmission spectroscopy of TOI-3757 b using the helium 10830 \AA~ line. Doing this, we place an upper limit of 6.9 \% (with 90\% confidence) on the maximum depth of the absorption from the metastable transition of He at $\sim$ 10830 \AA, which can help constraint the atmospheric mass loss rate in this energy limited regime., Comment: AJ. arXiv admin note: text overlap with arXiv:2107.13670

Accurate tracers of the stellar magnetic field and rotation are cornerstones for the study of M dwarfs and for reliable detection and characterization of their exoplanetary companions. Such measurements are particularly challenging for old, slowly rotating, fully convective M dwarfs. To explore the use of new activity and rotation tracers, we examined multi-year near-infrared spectroscopic monitoring of two such stars -- GJ 699 (Barnard's Star) and Teegarden's Star -- carried out with Habitable Zone Planet Finder spectrograph. We detected periodic variations in absorption line widths across the stellar spectrum with higher amplitudes towards longer wavelengths. We also detected similar variations in the strength and width of the 12435.67 Angstrom neutral potassium (K I) line, a known tracer of the photospheric magnetic field. Attributing these variations to rotational modulation, we confirm the known $145\pm15$ d rotation period of GJ 699, and measure the rotation period of Teegarden's Star to be $99.6\pm1.4$ d. Based on simulations of the K I line and the wavelength-dependence of the line width signal, we argue that the observed signals are consistent with varying photospheric magnetic fields and the associated Zeeman effect. These results highlight the value of detailed line profile measurements in the near-infrared for diagnosing stellar magnetic field variability. Such measurements may be pivotal for disentangling activity and exoplanet-related signals in spectroscopic monitoring of old, low-mass stars., Comment: Accepted for publication in ApJL

We confirm the planetary nature of two gas giants discovered by TESS to transit M dwarfs. TOI-3714 ($V=15.24,~J=11.74$) is an M2 dwarf hosting a hot Jupiter ($M_p=0.70 \pm 0.03~\mathrm{M_J}$ and $R_p=1.01 \pm 0.03~\mathrm{R_J}$) on an orbital period of $2.154849 \pm 0.000001$ days with a resolved white dwarf companion. TOI-3629 ($V=14.63,~J=11.42$) is an M1 dwarf hosting a hot Jupiter ($M_p=0.26 \pm 0.02~\mathrm{M_J}$ and $R_p=0.74 \pm 0.02~\mathrm{R_J}$) on an orbital period of $3.936551_{-0.000006}^{+0.000005}$ days. We characterize each transiting companion using a combination of ground-based and space-based photometry, speckle imaging, and high-precision velocimetry from the Habitable-zone Planet Finder and the NEID spectrographs. With the discovery of these two systems, there are now nine M dwarfs known to host transiting hot Jupiters. Among this population, TOI-3714 b ($T_{eq}=750\pm20$ K and $\mathrm{TSM}=98\pm7$) and TOI-3629 b ($T_{eq}=690\pm20$ K and $\mathrm{TSM}=80\pm9$) are warm gas giants amenable to additional characterization with transmission spectroscopy to probe atmospheric chemistry and, for TOI-3714, obliquity measurements to probe formation scenarios., Comment: 39 pages, 13 figures, 4 tables. Accepted for publication in AJ

Mid-infrared (MIR) spectrometers are invaluable tools for molecular fingerprinting and hyper-spectral imaging. Among the available spectroscopic approaches, GHz MIR dual-comb absorption spectrometers have the potential to simultaneously combine the high-speed, high spectral resolution, and broad optical bandwidth needed to accurately study complex, transient events in chemistry, combustion, and microscopy. However, such a spectrometer has not yet been demonstrated due to the lack of GHz MIR frequency combs with broad and full spectral coverage. Here, we introduce the first broadband MIR frequency comb laser platform at 1 GHz repetition rate that achieves spectral coverage from 3 to 13 {\mu}m. This frequency comb is based on a commercially available 1.56 {\mu}m mode-locked laser, robust all-fiber Er amplifiers and intra-pulse difference frequency generation (IP-DFG) of few-cycle pulses in \c{hi}(2) nonlinear crystals. When used in a dual comb spectroscopy (DCS) configuration, this source will simultaneously enable measurements with {\mu}s time resolution, 1 GHz (0.03 cm-1) spectral point spacing and a full bandwidth of >5 THz (>166 cm-1) anywhere within the MIR atmospheric windows. This represents a unique spectroscopic resource for characterizing fast and non-repetitive events that are currently inaccessible with other sources.

We validate the planetary nature of an ultra-short period planet orbiting the M dwarf KOI-4777. We use a combination of space-based photometry from Kepler, high-precision, near-infrared Doppler spectroscopy from the Habitable-zone Planet Finder, and adaptive optics imaging to characterize this system. KOI-4777.01 is a Mars-sized exoplanet ($\mathrm{R}_{p}=0.51 \pm 0.03R_{\oplus}$) orbiting the host star every 0.412-days ($\sim9.9$-hours). This is the smallest validated ultra-short period planet known and we see no evidence for additional massive companions using our HPF RVs. We constrain the upper $3\sigma$ mass to $M_{p}<0.34~\mathrm{M_\oplus}$ by assuming the planet is less dense than iron. Obtaining a mass measurement for KOI-4777.01 is beyond current instrumental capabilities., Comment: 25 pages, 8 figures, accepted for publication in AJ

We present high-resolution observations of a flaring event in the M8 dwarf vB 10 using the near-infrared Habitable zone Planet Finder (HPF) spectrograph on the Hobby Eberly Telescope (HET). The high stability of HPF enables us to accurately subtract a VB 10 quiescent spectrum from the flare spectrum to isolate the flare contributions, and study the changes in the relative energy of the Ca II infrared triplet (IRT), several Paschen lines, the He 10830 \AA~ triplet lines, and select iron and magnesium lines in HPF`s bandpass. Our analysis reveals the presence of a red asymmetry in the He 10830 \AA~ triplet; which is similar to signatures of coronal rain in the Sun. Photometry of the flare derived from an acquisition camera before spectroscopic observations, and the ability to extract spectra from up-the-ramp observations with the HPF infrared detector, enables us to perform time-series analysis of part of the flare, and provide coarse constraints on the energy and frequency of such flares. We compare this flare with historical observations of flares around vB 10 and other ultracool M dwarfs, and attempt to place limits on flare-induced atmospheric mass loss for hypothetical planets around vB 10., Comment: Accepted in ApJ. 22 pages, 13 figures, 3 tables

The warm Neptune GJ 3470b transits a nearby ($d=29$pc) bright slowly rotating M1.5-dwarf star. Using spectroscopic observations during two transits with the newly commissioned NEID spectrometer on the WIYN 3.5m Telescope at Kitt Peak Observatory, we model the classical Rossiter-Mclaughlin effect yielding a sky-projected obliquity of $\lambda=98_{-12}^{+15\:\circ}$ and a $v \sin i = 0.85_{-0.33}^{+0.27}$km/s. Leveraging information about the rotation period and size of the host star, our analysis yields a true obliquity of $\psi=95_{-8}^{+9\:\circ}$, revealing that GJ 3470b is on a polar orbit. Using radial velocities from HIRES, HARPS and the Habitable-zone Planet Finder, we show that the data are compatible with a long-term RV slope of $\dot{\gamma} = -0.0022 \pm 0.0011$m/s/day over a baseline of 12.9 years. If the RV slope is due to acceleration from another companion in the system, we show that such a companion is capable of explaining the polar and mildly eccentric orbit of GJ 3470b using two different secular excitation models. The existence of an outer companion can be further constrained with additional RV observations, Gaia astrometry, and future high-contrast imaging observations. Lastly, we show that tidal heating from GJ 3470b's mild eccentricity has most likely inflated the radius of GJ 3470b by a factor of $\sim$1.5-1.7, which could help account for its evaporating atmosphere., Comment: 21 pages, 7 figures. Accepted in ApJL