Search

The present study analyzed the effects of low-level laser therapy (LLLT) and the purified natural latex protein (Hevea brasiliensis, F1 protein) on the morpho-function of sciatic nerve crush injuries in rats. One-hundred and eight male Wistar rats were randomly allocated to six groups (n = 18): 1. Control; 2. Exposed (nerve exposed); 3. Injury (injured nerve without treatment); 4. LLLT (injured nerve irradiated with LLLT (15 J/cm2, 780 nm)); 5. F1 (injured nerve treated with F1 protein (0.1%)); and 6. LLLT + F1 (injured nerve treated with LLLT and F1). On the 1st, 7th, 14th, and 56th days after injury, a functional sensory analysis of mechanical allodynia and mechanical hyperalgesia and a motor analysis of grip strength and gait were performed. After 3, 15, and 57 days, the animals were euthanized for morphometric/ultrastructural analyses. The treatments applied revealed improvements in morphometric/ultrastructural parameters compared to the injured group. Sensory analyses suggested that the improvements observed were associated with time progression and not influenced by the treatments. Motor analyses revealed significant improvements in grip strength from the 7th day in the LLLT group and in gait from the 56th day in all treated groups. We concluded that even though the morphological analyses showed improvements with the treatments, they did not influence sensory recovery, and LLLT improved motor recovery. [ABSTRACT FROM AUTHOR]

The allografts were used to obtain sufficient alveolar bone tissue for proper dental implant placement. The objective of the present study was to evaluate the morphological and quantitative characteristics (cellular and collagen densities) of the newly formed alveolar bone with the application of cortical bone (CB) and demineralized bone matrix (DBM) allografts. Six samples of alveolar bone tissue from 5 patients (50 ± 6.3 years) were obtained after 6 months of application of the allografts and immediately before the placement of the dental implants. The samples were fixed (buffered formaldehyde, pH7.2), decalcified (EDTA 10%) and histologically processed (HE and Picro-Sirius) for histologic analysis. Morphological analysis revealed presence of osteocytes and trabeculae in neoformed bone tissue near the allografts and absence of inflammatory and allergic cells; the remnants of CB were located mainly in the periphery of the bone tissue and the remnants of DBM were more incorporated into the tissue. Osteogenitor cells were observed around the remaining material. The cell density was not modified in newly formed bone tissue with the application of both allografts as compared to mature bone tissue. The density of the type I and III collagens present in the osteoids interspersed with the remainder of the materials showed a tendency to increase in the samples treated with DBM. It was concluded that by the histological characteristics observed both grafts were biocompatible, however the bone treated with DBM presented better incorporation and a tendency of increase of the collagen content in the remnant region of the allografts. [ABSTRACT FROM AUTHOR]

The effects of low-level laser therapy (LLLT) and natural latex protein (F1, Hevea brasiliensis) were evaluated on crush-type injuries (15kg) to the sciatic nerve in the expressions of nerve growth factor (NGF) and vascular endothelium growth factor (VEGF) and ultrastructural morphology to associate with previous morphometric data using the same protocol of injury and treatment. Thirty-six male rats were allocated into six experimental groups (n = 6): 1-Control; 2-Exposed nerve; 3-Injured nerve; 4-LLLT (15J/cm2, 780nm, 30mW, Continuous Wave) treated injured nerve; 5-F1 (0,1mg) treated injured nerve; and 6-LLLT&F1 treated injured nerve. Four or eight weeks after, sciatic nerve samples were processed for analysis. NGF expression were higher (p<0.05) four weeks after in all injured groups in comparison to Control (Med:0.8; Q1:0; Q3:55.5%area). Among them, the Injured (Med:70.7; Q1:64.4; Q3:77.5%area) showed the highest expression, and F1 (Med:17.3; Q1:14.1; Q3:21.7%area) had the lowest. At week 8, NGF expressions decreased in the injured groups. VEGF was expressed in all groups; its higher expression was observed in the injured groups 4 weeks after (Injured. Med:29.5; F1. Med:17.7 and LLLT&F1. Med:19.4%area). At week 8, a general reduction of VEGF expression was noted, remaining higher in F1 (Med:35.1; Q1.30.6; Q3.39.6%area) and LLLT&F1 (Med:18.5; Q1:16; Q3:25%area). Ultrastructural morphology revealed improvements in the treated groups; 4 weeks after, the F1 group presented greater quantity and diameter of the nerve fibers uniformly distributed. Eight weeks after, the F1 and LLLT&F1 showed similar characteristics to the non-injured groups. In summary, these results and our previous studies indicated that F1 and LLLT may favorably influence the healing of nerve crush injury. Four weeks after nerve injury F1 group showed the best results suggesting recovery acceleration; at 8th week F1 and LLLT&F1 groups presented better features and higher vascularization that could be associated with VEGF maintenance. [ABSTRACT FROM AUTHOR]

It is critical to know the precise location and configuration of the mandibular canal (MC) to avoid damages in the alveolar inferior nerve during an invasive dental treatment. The aim of this study was to provide anatomic relationships of the mandibular canal in its entire pathway related to cortical walls and dental roots to serve as basic knowledge for dental clinical procedures performed in this area. We analyzed 50 CBCT images assessing the specific location of MC at the retromolar space as related to inferior teeth roots. Data were analyzed by side using descriptive statistics (median: mean [M], standard deviation [SD], 95 % confidence interval: lower endpoint [IC] and upper endpoint [IC']). The MC length and pathway were measured from the mandibular foramen up to the mental foramen. MC was closer from lingual cortical than buccal at the retromolar space as well the distal root of the second molar and the root of the second premolar are closest to MC. A mean length for the MC of 70.8 (±5.3 mm) for the right side and 71 (±5.8 mm) for the left side were observed. In conclusion, it is critical for clinicians to know three-dimensionally the topographic relationships between the inferior teeth roots and the mandibular canal before proceeding to any invasive dental or surgical procedure at this region. [ABSTRACT FROM AUTHOR]

Tendons are transition tissues that transfer the contractile forces generated by the muscles to the bones, allowing movement. The region where the tendon attaches to the bone is called bone-tendon junction or enthesis and may be classified as fibrous or fibrocartilaginous. This study aims to analyze the collagen fibers and the cells present in the bone-tendon junction using light microscopy and ultrastructural techniques as scanning electron microscopy and transmission electron microscopy. Forty male Wistar rats were used in the experiment, being 20 adult rats at 4 months-old and 20 elderly rats at 20 months-old. The hind limbs of the rats were removed, dissected and prepared to light microscopy, transmission electron microscopy and scanning electron microscopy. The aging process showed changes in the collagen fibrils, with a predominance of type III fibers in the elderly group, in addition to a decrease in the amount of the fibrocartilage cells, fewer and shorter cytoplasmic processes and a decreased synthetic capacity due to degradation of the organelles involved in synthesis. [ABSTRACT FROM AUTHOR]

Introduction: In this study we evaluated the characteristics of the tibialis anterior muscle after sciatic nerve crush and treatment with low-level laser therapy (LLLT) or the protein from natural latex (P1). Methods: We studied the following 6 groups of male Wistar rats: control (CG); exposed nerve (EG); injured nerve (IG); injured nerve with LLLT (LG); injured nerve with P1 (PG); and injured nerve with P1 and LLLT (LPG). Results: After 4 weeks, muscle morphology showed improvement in the treated groups; after 8 weeks, the treated groups resembled controls, especially the PG. Morphometry revealed muscle fiber atrophy after nerve injury, with time-dependent recovery. Histochemical analysis revealed increased intermediate fiber area. The PG was more similar to controls with NADH staining, whereas the LPG more closely resembled controls with SDH staining. Conclusion: Treatment using only P1 proved most efficient, revealing a negative interaction between P1 and LLLT. [ABSTRACT FROM AUTHOR]

Hyaluronic acid hydrogels (HAHs) have been used as a carrier of substances and factors in the repair of nervous tissue. Natural latex protein ( Hevea brasiliensis, F1) has shown positive effects in treating various types of tissues, including peripheral nerves. This study evaluated the F1 associated with a HAH in a controlled crush injury (axonotmesis) of the sciatic nerve in Wistar rats. The samples were photomicrographed for morphometric and quantitative analyzes using ImageJ 1.47k software (NIH, Bethesda, MD). Morphological, quantitative (myelin area/nerve area ratio and capillary density) and morphometric (minimum nerve fiber diameter, G-Ratio) data revealed an improvement in the recovery of the sciatic nerve with the application of HAH and the combination of HAH and F1 after 4 and 8 weeks of nerve injury. The most efficacious results were observed with the combination of both substances, F1 and HAH, revealing the regenerative capacity of this new biomaterial, which was hardly tested on nerve tissue. [ABSTRACT FROM AUTHOR]

The sensory nerve endings of the rat tongue, cheek and palate were studied using immunohistochemical staining and transmission electron microscopy analysis. The specimens were fixed in modified Karnovsky solution and embedded in Spurr resin. Substance P, calcitonin gene-related peptide (CGRP)- and protein gene product 9.5 (PGP b9.5)-containing nerve fibers in the rat tongue, cheek and palate were examined by electronic microscopical analysis and immunohistochemical localization. These fibers run very close to the basal lamina of the epithelium and extend into the filliform and fungiform papillae. Numerous plexiform fibers immunoreactive for substance P, CGRP and PGP 9.5 were found in the connective tissue of mucosa. Electron microscopic observations showed clearly immunostained nerve fibers, which are located very close to the basal lamina of epithelial cells. Some electron-dense granules may be observed in the axoplasms of both substance P and CGRP immunoreactive fibers. Several lamellar corpuscles into the subepithelial connective tissue papillae, Merkel corpuscles and numerous thin unmyelinated and myelinated axons were observed. The terminal axons revealed numerous mitochondria, neurofilaments, microtubules and clear vesicles in the base of axoplasmic protrusions. The lamellar cells showed caveolae and interlamelar spaces filled by amorphous substance. Between the lamellar cells and axoplasmic membrane, and in the adjacent lamellae region, desmosome-type junctions were observed. The quantitative and morphometric analysis showed nerve endings with an average area of 4.83 ± 3.4 μm2 and 19.4 internal mitochondria in this site and the organized corpuscles with an average area of 79.24 ± 27.24 μm2 and 24.23 internal mitochondria in this place. All the structures observed are involved in the transmission of pain and mechanoreceptors stimulus of these oral mucosae. [ABSTRACT FROM PUBLISHER]

This study analyzed the effects of a low-level laser therapy (LLLT, 15 J/cm², 780 nm wavelength) and the natural latex protein (P1, 0.1%) in sciatic nerve after crush injury (15 Kgf, axonotmesis) in rats. Sixty rats (male, 250 g) were allocated into the 6 groups (n = 10): CG--control group; EG--nerve exposed; IG--injured nerve without treatment; LG--crushed nerve treated with LLLT; PG--injured nerve treated with P1; and LPG--injured nerve treated with LLLT and P1. After 4 or 8 weeks, the nerve samples were processed for morphological, histological quantification and ultrastructural analysis. After 4 weeks, the myelin density and morphological characteristics improved in groups LG, PG, and LPG compared to IG. After 8 weeks, PG, and LPG were similar to CG and the capillary density was higher in the LG, PG, and LPG. In the ultrastructural analysis the PG and LPG had characteristics that were similar to the CG. The application of LLLT and/or P1 improved the recovery from the nerve crush injury, and in the long term, the P1 protein was the better treatment used, since only the application of LLLT has not reached the same results, and these treatments applied together did not potentiate the recovery. [ABSTRACT FROM AUTHOR]

Abstract: The present study evaluates by ultrastructural and immunohistochemical methods, the possible changes on muscular tissue affected by LLLI during a treatment, for example, in cases of temporomandibular joint disorders. Sixty male Wistar rats divided into 6 groups (n =10) received ten laser irradiations, with different energy densities (groups I-0; II-0.5; III-1.0; IV-2.5; V-5.0; and VI-20J/cm2). Muscles were removed and processed for transmission electron microscopic and immunohistochemical (VEGF and VEGFR-2) analyses. Captured photomicrographs of immunohistochemistry and transmission electron microscopy were evaluated. It was observed in the irradiated muscles, mitochondria of different shapes and sizes, with increased plasticity evidenced by organelles in fusion, division and the presence of elongated structures with characteristics of mitochondria, proximity with the dilated sarcoplasmatic reticulum, suggesting organelles with large amounts of energy, and the presence of cytoplasmic protrusions in the capillaries with high dosages. All studied groups showed immunostainings for both markers (VEGF and VEGFR-2), but in general those who received higher doses also showed the markings more pronounced, suggesting dose-dependent biomodulation. It was concluded that the LLLI was able to modify the ultrastructural characteristics and immunohistochemical pattern of VEGF and VEGFR-2 in the masseter muscle of rats. [Copyright &y& Elsevier]

• Three swallowing patterns were identified. • Pattern II was found at a lower frequency than pattern I and III. • Significant differences were found between pattern I and III. • The swallowing patterns was corroborated with quantitative data of tongue movement and its relation with the palate. The purpose of this study was to compare the different swallowing patterns regarding tongue movement during saliva swallowing in healthy participants. Seventeen participants (23.0 ± 3.6 years old) were included in this cross-sectional study. The movement of the tongue (anterior, middle and posterior portions) on the three axes of space (inferior-superior, anterior-posterior and medial-lateral) was recorded using a 3D electromagnetic articulograph. The tongue movement patterns registered during saliva swallowing were classified according to Bourdiol et al. (2014) into Type I, II or III. Three swallowing patterns were identified (Type I, 64.7 %; Type II, 5.9 %; and Type III, 29.4 %). On the anterior-posterior axis, the displacement of the three portions of the tongue was significantly higher in Type III pattern compared with the Type I pattern. Furthermore, on the superior-inferior axis, the displacement of the anterior portion was significantly higher in Type III pattern compared with Type I pattern. In Type I pattern, on the inferior-superior axis, the smallest range of displacement occurred in the anterior portion of the tongue, followed by the middle and, finally, the posterior portion. In the analysis of Type III swallowing pattern, no significant differences were found on the range of displacement of the tongue portions on the three axes. Statistical differences were found between swallowing patterns Type I and III regarding tongue movement. The frequency of pattern II found in the participants of this study was not high enough to compare the three patterns. However, the results obtained indicate that the methodology applied could be used to identify the patterns based on quantitative data. [ABSTRACT FROM AUTHOR]

Background: The elaboration of biocompatible nerve guide conduits (NGCs) has been studied in recent years as a treatment for total nerve rupture lesions (axonotmesis). Different natural polymers have been used in these studies, including cellulose associated with soy protein. The purpose of this report was to describe manufacturing NGCs suitable for nerve regeneration using the method of dip coating and evaporation of solvent with cellulose acetate (CA) functionalized with soy protein acid hydrolysate (SPAH). Methods: The manufacturing method and bacterial control precautions for the CA/SPAH NGCs were described. The structure of the NGCs was analyzed under a scanning electron microscope (SEM); porosity was analyzed with a degassing method using a porosimeter. Schwann cell (SCL 4.1/F7) biocompatibility of cell-seeded nerve guide conduits was evaluated with the MTT assay. Results: The method employed allowed an easy elaboration and customization of NGCs, free of bacteria, with pores in the internal surface, and the uniform wall thickness allowed manipulation, which showed flexibility; additionally, the sample was suturable. The NGCs showed initial biocompatibility with Schwann cells, revealing cells adhered to the NGC structure after 5 days. Conclusions: The fabricated CA/SPAH NGCs showed adequate features to be used for peripheral nerve regeneration studies. Future reports are necessary to discuss the ideal concentration of CA and SPAH and the mechanical and physicochemical properties of this biomaterial. [ABSTRACT FROM AUTHOR]

Background: The envelope of motion is a diagrammatic representation of the mandibular border movements. Classically, those movements are carried out eccentrically; starting from the position of maximal intercuspation, the mandible describes an excursion movement until reaching maximal mouth opening. Reverse movements would describe a different path, but up to now concentric development of mandibular border movements has not been considered. Literature states that beyond mandibular border movements limits, no movement is possible. Therefore, it is of great interest to compare both paths—both envelopes of motion—and define the actual limits of mandibular movement. Objective: The aim of this study was to compare the geometric characteristics of mandibular border movements carried out eccentrically and concentrically by healthy subjects. Methods: Sixteen individuals aged between 18 and 27 years, molar class I and with no temporomandibular disorders, participated in the study. Eccentric and concentric mandibular movements were recorded using a 3D electromagnetic articulograph. Data were processed with computational scripts developed in MATLAB. Maximum mouth opening, trajectories, displacement ranges, polygon areas and chewing cycle area/ mandibular border movements area ratio were analysed. Results: The frontal plane showed significant differences in all the parameters evaluated. Higher values were registered in the concentric area of the border movement envelope (P =.008) and in the trajectories on both sides. Statistical differences were observed in polygon areas (P =.006) in the sagittal plane and right ranges (P =.046) in the horizontal plane. Conclusion: Concentric mandibular movements revealed significant differences in three‐dimensional trajectories in the frontal plane. [ABSTRACT FROM AUTHOR]

The placement of a polymeric electrospun scaffold is among the most promising strategies to improve nerve regeneration after critical neurotmesis. It is of great interest to investigate the effect of these structures on Schwann cells (SCs), as these cells lead nerve regeneration and functional recovery. The aim of this study was to assess SC viability and morphology when cultured on polyhydroxybutyrate (PHB) electrospun scaffolds with varied microfiber thicknesses and pore sizes. Six electrospun scaffolds were obtained using different PHB solutions and electrospinning parameters. All the scaffolds were morphologically characterized in terms of fiber thickness, pore size, and overall appearance by analyzing their SEM images. SCs seeded onto the scaffolds were analyzed in terms of viability and morphology throughout the culture period through MTT assay and SEM imaging. The SCs were cultured on three scaffolds with homogeneous smooth fibers (fiber thicknesses: 2.4 μm, 3.1 μm, and 4.3 μm; pore sizes: 16.7 μm, 22.4 μm, and 27.8 μm). SC infiltration and adhesion resulted in the formation of a three-dimensional network composed of intertwined fibers and cells. The SCs attached to the scaffolds maintained their characteristic shape and size throughout the culture period. Bigger pores and thicker fibers resulted in higher SC viability. [ABSTRACT FROM AUTHOR]

Parkinson's Disease (PD), treated with the dopamine precursor l-3,4-dihydroxyphenylalanine (L-DOPA), displays motor and non-motor orofacial manifestations. We investigated the pathophysiologic mechanisms of the lateral pterygoid muscles (LPMs) and the trigeminal system related to PD-induced orofacial manifestations. A PD rat model was produced by unilateral injection of 6-hydroxydopamine into the medial forebrain bundle. Abnormal involuntary movements (dyskinesia) and nociceptive responses were determined. We analyzed the immunodetection of Fos-B and microglia/astrocytes in trigeminal and facial nuclei and morphological markers in the LPMs. Hyperalgesia response was increased in hemiparkinsonian and dyskinetic rats. Hemiparkinsonism increased slow skeletal myosin fibers in the LPMs, while in the dyskinetic ones, these fibers decreased in the contralateral side of the lesion. Bilateral increased glycolytic metabolism and an inflammatory muscle profile were detected in dyskinetic rats. There was increased Fos-B expression in the spinal nucleus of lesioned rats and in the motor and facial nucleus in L-DOPA-induced dyskinetic rats in the contralateral side of the lesion. Glial cells were increased in the facial nucleus on the contralateral side of the lesion. Overall, spinal trigeminal nucleus activation may be associated with orofacial sensorial impairment in Parkinsonian rats, while a fatigue profile on LPMs is suggested in L-DOPA-induced dyskinesia when the motor and facial nucleus are activated. [ABSTRACT FROM AUTHOR]

This study analyzed the effects of a low-level laser therapy (LLLT, 15 J/cm², 780 nm wavelength) and the natural latex protein (P1, 0.1%) in sciatic nerve after crush injury (15 Kgf, axonotmesis) in rats. Sixty rats (male, 250 g) were allocated into the 6 groups (n = 10): CG--control group; EG--nerve exposed; IG--injured nerve without treatment; LG--crushed nerve treated with LLLT; PG--injured nerve treated with P1; and LPG--injured nerve treated with LLLT and P1. After 4 or 8 weeks, the nerve samples were processed for morphological, histological quantification and ultrastructural analysis. After 4 weeks, the myelin density and morphological characteristics improved in groups LG, PG, and LPG compared to IG. After 8 weeks, PG, and LPG were similar to CG and the capillary density was higher in the LG, PG, and LPG. In the ultrastructural analysis the PG and LPG had characteristics that were similar to the CG. The application of LLLT and/or P1 improved the recovery from the nerve crush injury, and in the long term, the P1 protein was the better treatment used, since only the application of LLLT has not reached the same results, and these treatments applied together did not potentiate the recovery. [ABSTRACT FROM AUTHOR]

Simple Summary: Currently, polymeric biomaterials are the choice for the design of scaffolds for the regeneration of peripheral nerves. Polyhydroxybutyrate (PHB) is a polymer belonging to the class of polyesters that are produced naturally in nature by microorganisms. To gain a better understanding of the efficacy of therapeutic approaches involving PHB scaffolds for peripheral nerve regeneration, we conducted a systematic review of the literature with the aim of discussing the current knowledge of PHB scaffolds applied to nerve regeneration. The use of PHB as a biomaterial to prepare tubular scaffolds for nerve regeneration was shown to be promising. The incorporation of additives appears to be a trend that improves nerve regeneration. In the last two decades, artificial scaffolds for nerve regeneration have been produced using a variety of polymers. Polyhydroxybutyrate (PHB) is a natural polyester that can be easily processed and offer several advantages; hence, the purpose of this review is to provide a better understanding of the efficacy of therapeutic approaches involving PHB scaffolds in promoting peripheral nerve regeneration following nerve dissection in animal models. A systematic literature review was performed following the "Preferred Reporting Items for Systematic Reviews and Meta-Analyses" (PRISMA) criteria. The revised databases were: Pub-Med/MEDLINE, Web of Science, Science Direct, EMBASE, and SCOPUS. Sixteen studies were included in this review. Different animal models and nerves were studied. Extension of nerve gaps reconnected by PHB scaffolds and the time periods of analysis were varied. The additives included in the scaffolds, if any, were growth factors, neurotrophins, other biopolymers, and neural progenitor cells. The analysis of the quality of the studies revealed good quality in general, with some aspects that could be improved. The analysis of the risk of bias revealed several weaknesses in all studies. The use of PHB as a biomaterial to prepare tubular scaffolds for nerve regeneration was shown to be promising. The incorporation of additives appears to be a trend that improves nerve regeneration. One of the main weaknesses of the reviewed articles was the lack of standardized experimentation on animals. It is recommended to follow the currently available guidelines to improve the design, avoid the risk of bias, maximize the quality of studies, and enhance translationality. [ABSTRACT FROM AUTHOR]

Electrospun scaffolds can imitate the hierarchical structures present in the extracellular matrix, representing one of the main concerns of modern tissue engineering. They are characterized in order to evaluate their capability to support cells or to provide guidelines for reproducibility. The issues with widely used methods for morphological characterization are discussed in order to provide insight into a desirable methodology for electrospun scaffold characterization. Reported methods include imaging and physical measurements. Characterization methods harbor inherent limitations and benefits, and these are discussed and presented in a comprehensive selection matrix to provide researchers with the adequate tools and insights required to characterize their electrospun scaffolds. It is shown that imaging methods present the most benefits, with drawbacks being limited to required costs and expertise. By making use of more appropriate characterization, researchers will avoid measurements that do not represent their scaffolds and perhaps might discover that they can extract more characteristics from their scaffold at no further cost. [ABSTRACT FROM AUTHOR]

Electrospun scaffolds have a 3D fibrous structure that attempts to imitate the extracellular matrix in order to be able to host cells. It has been reported in the literature that controlling fiber surface topography produces varying results regarding cell–scaffold interactions. This review analyzes the relevant literature concerning in vitro studies to provide a better understanding of the effect that controlling fiber surface topography has on cell–scaffold interactions. A systematic approach following PRISMA, GRADE, PICO, and other standard methodological frameworks for systematic reviews was used. Different topographic interventions and their effects on cell–scaffold interactions were analyzed. Results indicate that nanopores and roughness on fiber surfaces seem to improve proliferation and adhesion of cells. The quality of the evidence is different for each studied cell–scaffold interaction, and for each studied morphological attribute. The evidence points to improvements in cell–scaffold interactions on most morphologically complex fiber surfaces. The discussion includes an in-depth evaluation of the indirectness of the evidence, as well as the potentially involved publication bias. Insights and suggestions about dose-dependency relationship, as well as the effect on particular cell and polymer types, are presented. It is concluded that topographical alterations to the fiber surface should be further studied, since results so far are promising. [ABSTRACT FROM AUTHOR]

Abstract: This study analyzed the ultrastructural characteristics of the myotendinous junction (MTJ) between anterior belly of digastrics muscle and the intermediate tendon in adult rats. Six male Wistar rats were used and were anesthetized with an overdose of urethane and sacrificed by intracardiac perfusion with modified Karnovsky solution, postfixed in 1% osmium tetroxide, dehydrated in increasing series of alcohols and embedded in Spurr resin for transmission electron microscopic analysis. Ultrastructural analysis showed conical shape of the fiber extremity in MTJ region, highlighting the presence of numerous mitochondria arranged in groups in the subsarcolemmal and intermyofibrillary regions. Atypical MTJ characteristics were seen interspersed with bundles of collagen fibers. Classic characteristics such as finger-like processes by means of sarcoplasmic projections were observed among interdigitations. Terminals and periphericals bundles of myofibrils showed close relationship with the adjacent muscle fiber''s endomysium through lateral junctions. In the distal portion, it was observed that the communication region of microtendons forming the intermediate tendon of digastric muscle, and it can highlight the columns disposition of tenocytes. In conclusion, the MTJ ultrastructure between the anterior belly of digastric muscle and intermediate tendon of adult rats showed classical morphologic descriptions and presented an atypical region revealed by the subspecialization between the myofibrils bundles and collagen fibers in the MTJ region. [Copyright &y& Elsevier]

Abstract: The myotendon junction (MTJ) is a specialised area into the muscle fibers where the sarcoplasmic membranes connect to the collagen fibers bundles. There are few data about plasticity of the MTJ in aging processes. The aim of this study is to analyse the ultrastructure characteristics of MTJ of medial pterygoid muscle of adult and aged rats. Employing the transmission electron microscopy method, twenty male rats Wistar (Rattus norvegicus) were divided into two groups: A (n =10) with 12 months of age; B (n =10) 24 months of age. The animals were anaesthetised with overdose the urethane (3g/kg, i.p.) and sacrified during the perfusion with modified Karnovsky solution. The specimens were post-fixed in a 1% osmium tetroxide solution, dehydrated in ascending concentration of ethanol and embedded in Spurr resin. The thin sections, of 90nm thick, were counterstained with uranyl acetate and lead citrate solution, and examined in a Jeol 1010 transmission electron microscope. The fine structure of the MTJ of group A revealed the defined interdigitations and disposed in several levels of deep formations containing the collagen fibers. In the group B, such structures did not observed, detecting the projections irregular in shape, and large of extra matrix with in aspect of remodelling. In conclusion it was possible to identify the plasticity of MTJ in the group B which presented several morphological alterations comparing to the adult animals. These data of group B suggested the occurrence of aging processes in the MTJ in rats. [Copyright &y& Elsevier]

Abstract: This study verified the effect of unilateral teeth extraction on the suprahyoid muscles in gerbils (Meriones unguiculatus). Ten adult male gerbils weighing about 50g had induced occlusal alterations by upper molar teeth extraction on the left side while the other ten animals were only subjected to surgical stress, control group. After 60 days, animals of both groups, experimental and control had the suprahyoid muscles removed and processed for histological and histochemical (adenosine triphosphatase (ATPase), nicotine adenine dinucleotide tetrazolium reductase (NADH-TR) and succinate dehydrogenase (SDH)) purposes. The fiber type area was estimated in % according to Weibel method (point-counting method) using a test-system. The myosinic ATPase pH 4.7 activity in the control group of the digastric, milohyoid and geniohyoid muscles presented a small area of type I fiber and a larger area of type IIa fibers; in the experimental group, significant contractile capacity alteration was not observed. Samples of the digastric, milohyoid and geniohyoid muscles, after SDH activity, showed a small area with high metabolic activity fibers, and a large area with intermediary and low metabolic activity fibers in the control group. The milohyoid muscle of the experimental group presented low metabolic fibers in a reduced area, in both sides, however without significant difference. In the experimental group, high metabolic fibers were observed on the left side in a reduced area in the geniohyoid muscle, but without statistical significance. Thus, the geniohyoid muscle did not change the metabolic activity after occlusal alteration. In conclusion, 60 days of unilateral malocclusion induced was able to alter the fibers oxidative activity of the suprahyoid muscles, however, it does not affect the contractile property of the fibers. The digastric muscle has adequate fibers to produce fast contraction and able to resist to fatigue in intermediate degrees, but became more fatigable after unilateral exodontia. [Copyright &y& Elsevier]

The aim of this study was to analyze the general, geometric, and kinematic characteristics of the masticatory cycle’s movements in a tridimensional way, using a method developed by our study group to provide a new insight into the analysis of mandibular movements due to advancement in the potential of computational analysis. Ten individuals (20.1 ± 2.69 years), molar class I, without mandibular movement problems participated in this study. The movements of the masticatory cycles, frontal and sagittal mandibular border movements, were recorded using 3D electromagnetic articulography and processed with computational scripts developed by our research group. The number of chewing cycles, frequency (cycles/s), chewing cycle areas/mandibular border movements areas ratios, and the mouth opening and closing speeds on the 3D trajectory of the chewing cycle were compared. The cycles were divided and analyzed in thirds. The masticatory cycles showed high variation among the individuals (21.6 ± 9.4 cycles); the frequency (1.46 ± 0.21 cycles/s) revealed a moderate positive correlation (R = 0.52) with the number of cycles. The frontal area ratios between the cycle area and the mandibular border movement presented higher values in the first third (6.65%) of the masticatory cycles, and the ratios of sagittal areas were higher and more variable (first, 7.67%; second, 8.06%; and third, 10.04%) than the frontal view. The opening and closing mouth speeds were greater in the second third of the masticatory cycles (OS, 57.82 mm/s; CS, 58.34 mm/s) without a significant difference between the opening and closing movements when the same thirds were evaluated. Further studies are necessary to improve the understanding of the masticatory cycles regarding the standardization of parameters and their values. [ABSTRACT FROM AUTHOR]

Cases in which the normal amount of teeth is exceeded for the primary or permanent dentition formula, are known as supernumerary teeth or hyperdontia. This can occur in single, or multiple form, unilaterally or bilaterally, and affect both maxilla and mandible. It is more prevalent in men, in permanent dentition and in the maxilla; the mesiodens type being the most common supernumerary. Its etiology is still not entirely clear, however, hyperactivity of the dental lamina associated to genetic and environmental factors is the most accepted theory. Supernumerary teeth can be asymptomatic and can only be detected in radiographs. They can also present various clinical manifestations such as dental malposition, delay in dental eruption, root resorption and diastemas. Treatment depends on the type of tooth and its relation with adjacent structures. In the following report we present the case of an asymptomatic, upper and lower partially edentulous 54-year-old male patient, who requested rehabilitation treatment at a private dental clinic in Temuco, Chile. In routine panoramic radiography, two supernumerary teeth were observed, one on each side of the mandible and in the premolar region. Upon reviewing these findings with cone beam computed tomography, it was determined that the supernumerary on the right side corresponded to a supplementary premolar and the supernumerary on the left side corresponded to a supernumerary of molariform morphology. In this case we determined to extract the teeth, due to their location and impact on subsequent rehabilitation treatment. [ABSTRACT FROM AUTHOR]

The aim of this study was to analyze the influence of three different transmucosal heights of the abutments in single and multiple implant-supported prostheses through the finite element method. External hexagon implants, MicroUnit, and EsthetiCone abutments were scanned and placed in an edentulous maxillary model obtained from a tomography database. The simulations were divided into two groups: (1) one implant with 3.75 × 10 mm placed in the upper central incisor, simulating a single implant-supported fixed prosthesis with an EsthetiCone abutment; and (2) two implants with 3.75 × 10 mm placed in the upper lateral incisors with MicroUnit abutments, simulating a multiple implant-supported prosthesis. Subsequently, each group was subdivided into three models according to the transmucosal height (1, 2, and 3 mm). A static oblique load at an angle of 45 degrees to the long axis of the implant in palatal-buccal direction of 150 and 75 N was applied for multiple and single implant-supported prosthesis, respectively. The implants and abutments were assessed according to the equivalent Von Mises stress analyses while the bone and ceramics were analyzed through maximum and minimum principal stresses. The total deformation values increased in all models, while the transmucosal height was augmented. The transmucosal height of the abutments influences the stress values at the bone, ceramics, implants, and abutments of both the single and multiple implant-supported prostheses, with the transmucosal height of 1 mm showing the lowest stress values. [ABSTRACT FROM PUBLISHER]

Masticatory movements are studied for decades in odontology; a better understanding of them could improve dental treatments. The aim of this study was to describe an innovative, accurate, and systematic method of analyzing masticatory cycles, generating comparable quantitative data. The masticatory cycles of 5 volunteers (Class I, 19 ± 1.7 years) without articular or dental occlusion problems were evaluated using 3D electromagnetic articulography supported by MATLAB software. The method allows the trajectory morphology of the set of chewing cycles to be analyzed from different views and angles. It was also possible to individualize the trajectory of each cycle providing accurate quantitative data, such as number of cycles, cycle areas in frontal view, and the ratio between each cycle area and the frontal mandibular border movement area. There was a moderate negative correlation (−0.61) between the area and the number of cycles: the greater the cycle area, the smaller the number of repetitions. Finally it was possible to evaluate the area of the cycles through time, which did not reveal a standardized behavior. The proposed method provided reproducible, intelligible, and accurate quantitative and graphical data, suggesting that it is promising and may be applied in different clinical situations and treatments. [ABSTRACT FROM AUTHOR]

The objective of this study was to evaluate three energy densities of low-level laser therapy (LLLT, GaAlAs, 780 nm, 40 mW, 0.04 cm2) for the treatment of lesions to peripheral nerves using the sciatic nerve of rats injured via crushing model (15 kgf, 5.2 MPa). Thirty Wistar rats (♂, 200-250 g) were divided into five groups (n = 6): C-control, not injured, and irradiated; L0-injured nerve without irradiation; L4-injured nerve irradiated with LLLT 4 J/cm2 (0.16 J); L10-injured nerve irradiated with LLLT 10 J/cm2 (0.4 J); and L50-injured nerve irradiated with LLLT 50 J/cm2 (2 J). The animals were sacrificed 2 weeks after the injury via perfusion with glutaraldehyde (2.5%, 0.1 M sodium cacodylate buffer). The nerve tissue was embedded in historesin, cut (3 μm), mounted on slides, and stained (Sudan black and neutral red). The morphological and quantitative analysis (myelin and blood capillary densities) and morphometric parameters (maximum and minimum diameters of nerve fibers, axon diameter, G-ratio, myelin sheath thickness) were assessed using the ImageJ software. ANOVA (parametric) or Kruskal-Wallis (nonparametric) tests were used for the statistical analysis. Groups L0, L4, L10, and L50 exhibited diminished values of all the quantitative and morphometric parameters in comparison to the control group. The morphological, quantitative, and morphometric data revealed improvement after injury in groups L4, L10, and L50 (irradiated groups) compared to the injured-only group (L0); the best results, in general, were observed for the L10 group after 15 days of nerve injury. [ABSTRACT FROM AUTHOR]

Cellular behavior in nerve regeneration is affected by the architecture of the polymeric nerve guide conduits (NGCs); therefore, design features of polymeric NGCs are critical for neural tissue engineering. Hence, the purpose of this scoping review is to summarize the adequate quantitative/morphometric parameters of the characteristics of NGC that provide a supportive environment for nerve regeneration, enhancing the understanding of a previous study. 394 studies were found, of which 29 studies were selected. The selected studies revealed four morphometric characteristics for promoting nerve regeneration: wall thickness, fiber size, pore size, and porosity. An NGC with a wall thickness between 250–400 μm and porosity of 60–80%, with a small pore on the inner surface and a large pore on the outer surface, significantly favored nerve regeneration; resulting in an increase in nutrient permeability, retention of neurotrophic factors, and optimal mechanical properties. On the other hand, the superiority of electrospun fibers is described; however, the size of the fiber is controversial in the literature, obtaining optimal results in the range of 300 nm to 30 µm. The incorporation of these optimal morphometric characteristics will encourage nerve regeneration and help reduce the number of experimental studies as it will provide the initial morphometric parameters for the preparation of an NGC. [ABSTRACT FROM AUTHOR]

Abstract: In order to obtain a precise diagnosis and treatment for temporomandibular dysfunctions, it is necessary to have morphological and functional knowledge of the temporomandibular joint. Anatomic components are important to the understanding of the complexity of temporomandibular joint. Nonetheless, just as important are the anatomic relationships that this joint has with the neighboring structures. Thus, the aim of this study was to present the anatomic relationships of the temporomandibular joint in its various surfaces: external or lateral, anterior, posterior, medial, superior, and posterosuperior, considering the morphological and histological aspects. Nine human heads, fixed in formalin (10%) underwent sagittal medial section and were subsequently dissected, evidencing the anatomic components of all surfaces to be analyzed. Components of the external surface were: skin, subcutaneous tissue, lymphatic ganglia, parotid gland, superficial temporal artery, transverse facial artery, zygomatic-orbital artery, superficial temporal vein, facial and auriculotemporal nerves, masseter muscle, and pre-auricular lymphonodus. The anterior surface comprised the masseter and lateral pterygoid muscles (upper and inferior heads), pterygoid venous plexus, mandibular notch, posterior deep temporal artery, masseteric nerve, and deep posterior temporal branches. Medial surface components were: internal maxillary artery, of which middle meningeal artery was one of the closest branches to the TMJ, anterior tympanic artery, inferior alveolar, lingual, auriculotemporal, and chorda tympani nerves, which belonged to the surface posterior to the anterior wall of the auditory duct; auricolotemporal nerve, parotid gland; and petrotympanic fissure. The cerebral fossa (meninges and encephalon) belonged to the superior surface and the ear belonged to the posterosuperior surface. Histologically, the temporomandibular joint is composed by different tissues that compound the mandibular head, mandibular fossa, and articular eminence of the temporomandibular joint. It was concluded that the temporomandibular joint is a complex structure and the clinician must have the ability to formulate the diagnosis based on the understanding of morphological aspects of the structures that compose the stomatognatic system. [Copyright &y& Elsevier]

The "nerve guide conduits" (NGC) used in nerve regeneration must mimic the natural environment for proper cell behavior. Objective: To describe the main morphological characteristics of polymeric NGC to promote nerve regeneration. Methods: A scoping review was performed following the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) criteria in the PubMed, Web of Science, Science Direct, and Scientific Electronic Library Online (SciELO) databases. Primary studies that considered/evaluated morphological characteristics of NGC to promote nerve regeneration were included. Result: A total of 704 studies were found, of which 52 were selected. The NGC main morphological characteristics found in the literature were: (I) NGC diameter affects the mechanical properties of the scaffold. (II) Wall thickness of NGC determines the exchange of nutrients, molecules, and neurotrophins between the internal and external environment; and influences the mechanical properties and biodegradation, similarly to NGC (III) porosity, (IV) pore size, and (V) pore distribution. The (VI) alignment of the NGC fibers influences the phenotype of cells involved in nerve regeneration. In addition, the (VII) thickness of the polymeric fiber influences neurite extension and orientation. Conclusions: An NGC should have its diameter adjusted to the nerve with wall thickness, porosity, pore size, and distribution of pores, to favor vascularization, permeability, and exchange of nutrients, and retention of neurotrophic factors, also favoring its mechanical properties and biodegradability. [ABSTRACT FROM AUTHOR]

Abstract: The purpose of this study was to determine maximum bite force in molar and incisor regions in young Brazilian indigenous individuals, who have had a natural diet since birth, and compare the sample with white Brazilian individuals. To do this, individuals were paired one-to-one (same weight, height, and Class I facial pattern). A secondary purpose was to elucidate the relation between bite force and gender in both populations. Eighty-two Brazilians took part in this study. Participants were aged between 18 and 28 years and were divided into two groups: 41 Xingu indigenous individuals and 41 white Brazilian individuals, with 28 men and 13 women in each group. The inclusion criteria were: having complete dentition; normal occlusion; no neurological, psychiatric or movement disorders; no reports of toothaches; having satisfactory periodontal health; absence of large facial skeletal alterations (typical Class II and Class III individuals); and no previous treatments using occlusal splints. To measure maximum bite force, a digital dynamometer model IDDK (Kratos—Equipamentos Industriais Ltda, Cotia, São Paulo, Brazil) was used, with a capacity of 1000N, adapted for oral conditions. Assessments were made in the first molar (right and left) and central incisive regions. Results reveal that mean maximum bite forces in indigenous individuals of the right molar is 421N, left molar 429N and incisor region is 194N and for white individuals of the right molar is 410N, left molar 422N and incisor region is 117N. Comparing indigenous with white individuals, maximal bite force showed a tendency of being greater in the indigenous group. It was observed that the incisor region showed statistical significance (p <0.0005) but no significance was observed in the molar region. Moreover, indigenous men showed the highest bite force values. [Copyright &y& Elsevier]

R2004 --> Introduction: Cellular behavior in peripheral nerve regeneration is directly affected by the architecture of the Scaffold or Nerve Guide Conduits (NGC) therefore design features and selection of a suitable NGC are critical for neural tissue engineering. Thus, the objective of this review is to summarize the current knowledge on the adequate parameters of tubular scaffold features. Review methods: A qualitative systematic review of the literature was carried out following the criteria of Preferred Reporting Items for Systematic Reviews and Meta‐Analysis (PRISMA). The following databases were used: PubMed/MEDLINE, Scopus, Web of Science, Scielo. A preliminary search was made to establish the main morphological characteristics of a tubular scaffold that influence peripheral nerve regeneration, converging on seven: Scaffold adjustment; wall thickness; porosity; pore size and orientation; alignment and thickness of the fibers. Finally, a new systematic search was carried out including the main characteristics. Primary studies studying one or more pre‐established characteristics were included. Results: A total of 1901 studies were found, and 50 animals and/or in vitro studies were selected. In general, the oversized Scaffold negatively affects nerve regeneration. On the other hand, an electrospun fibrous Scaffold, with aligned fibers from 0.76 to 5 µm thick, a wall thickness between 250‐400 μm, the porosity of 60‐80%, asymmetric, with nano‐sized pores (∼50 nm) on the internal surface and pores of micrometric size (∼50 μm) on the external surface, significantly favored nerve regeneration, resulting in increased nutrient permeability, retention of neurotrophic factors, and optimal mechanical properties. Conclusions: The incorporation of these optimal morphological characteristics described in the literature in the tubular scaffolds will favor peripheral nerve regeneration and will help to reduce the number of in vitro and in vivo experimental studies necessary to evaluate the bioartificial nerve graft since it will provide the initial morphological parameters in its elaboration, ensuring success in morphological terms. [ABSTRACT FROM AUTHOR]