Search

The COVID-19 pandemic led to a sudden global increase in the production, consumption, and mismanagement of personal protective equipment (PPE). As plastic-based PPE such as disposable face masks and gloves have become widely used, human exposure to PPE-derived pollutants may occur through indirect and direct pathways. This review explores the potential health impacts related to plastic-based PPE through these pathways. Face masks release microplastics, which are directly inhaled during use or transported through the environment. The latter can adsorb chemical contaminants and harbor pathogenic microbiota, and once consumed by organisms, they can translocate to multiple organs upon intake, potentially causing detrimental and cytotoxic effects. However, more research is required to have a comprehensive overview of the human health effects.

Microplastics (MPs) are widespread in the water column of several aquatic ecosystems. Thus, the sampling methodology is considered as a basic factor influencing MPs abundance. In this baseline, a total of 67 investigations were chosen to conduct a quantitative analysis between two sampling methods: Trawl and bulk. The aim is to report a general overview of the MPs abundance and characteristic differences based on the sampling procedures and provide methodological recommendations. MPs abundance reported by bulk studies is 3500 higher than trawl studies. Furthermore, the morphological types and polymers abundances were statistically affected by the type of sampling tool. Conversely, MPs size ranges were significantly different between sampling procedures, suggesting that trawling underestimates the smaller MPs fractions. The analysis confirms that the sampling methods should be selected based on the research objectives. In this sense, it is recommended to combine both types of sampling procedures to obtain comprehensive data.

Investigations of the physicochemical degradation of personal protective equipment (PPE) under controlled environmental conditions are largely lacking. Here the chemical and physical changes of face masks and gloves (recovered from the marine environment) were evaluated after exposure time up to 60 days of simulated environmental conditions. The results suggested that the polymer backbone of PPE suffers typical changes induced by sun exposure. Changes in the intensity of diffraction peaks indicated shifts in the crystallinity of PPE, possibly altering their thermal behavior. Signs of physical degradation in PPE, such as ruptures, and rough surfaces, which exacerbated over time were also detected. Additionally, signals of some elements of concern, such as Cu and Mo, and elements typically found in seawater were detected. The results of this study allowed us to better understand the degradation of typical PPE items in the marine environment, ultimately resulting in the release of microplastics and chemical contaminants.

Marine pollution with personal protective equipment (PPE) has recently gained major attention. Multiple studies reported the release of microplastics (MPs) and chemical contaminants from face masks, the most used PPE type. However, not much is known concerning the release of phthalate esters (PAEs) in aquatic media, as well as the hazard posed by other types of PPE. In the present study, we investigated the release of MPs and PAEs from face masks and gloves recovered from the environment. The results indicated that both PPEs release MPs comparable to the literature, but higher concentrations were presented by face masks. In turn, the total concentration of six PAEs was higher in gloves than in face masks. The release of these contaminants is exacerbated over time. The present study allows researchers to understand the contribution of PPE to marine pollution while accounting for gloves, a generally overlooked source of contaminants.

Although coastal water marine algae have been popularly used by others as indicators of heavy metal pollution, data within the Bay of Bengal for the estuarine Cox’s Bazar region and Saint Martin’s Island has remained scarce. Using marine algae, the study herein forms an effort in biomonitoring of metal contamination in the aforementioned Bangladesh areas. A total of 10 seaweed species were collected, including edible varieties, analyzed for metal levels through the use of the technique of EDXRF. From greatest to least, measured mean metal concentrations in descending order have been found to be K > Fe > Zr > Br > Sr > Zn > Mn > Rb > Cu > As > Pb > Cr > Co. Potential toxic heavy metals such as Pb, As, and Cr appear at lower concentration values compared to that found for essential mineral elements. However, the presence of Pb in Sargassum oligocystum species has been observed to exceed the maximum international guidance level. Given that some of the algae species are cultivated for human consumption, the non-carcinogenic and carcinogenic indices were calculated, shown to be slightly lower than the maxima recommended by the international organizations. Overall, the present results are consistent with literature data suggesting that heavy metal macroalgae biomonitoring may be species-specific. To the best of our knowledge, this study represents the first comprehensive macroalgae biomonitoring study of metal contamination from the coastal waters of Cox’s Bazar and beyond.

Beaches in the Anthropocene carry the heavy burden of human-derived pollution, like that induced by plastic litter. For decades, plastic debris has been classified based on its source or physical size. In recent years, studies described and documented new forms of plastic formations, including plastiglomerates, plasticrusts, and pyroplastics. However, reports of these newly described formations are substantially lacking. Therefore, in the present study, we reported the first evidence of plasticrusts (plastic encrusting rock surfaces), plastiglomerates (organic/inorganic composite materials in a plastic matrix), and pyroplastics (burned and weathered plastics) in Peru. The plastic pollutants were recovered from the field through marine litter surveys on four beaches where illegal litter burning and campfires take place. All the suspected plastic formations were analyzed and confirmed using Fourier transformed infrared (FTIR) spectroscopy, and one of each type was analyzed by X-Ray fluorescence (EDX) spectrometry. Plastiglomerates consisted of a high-density polyethylene (HDPE) or polypropylene (PP) matrix with rock and sand inclusions. Pyroplastics were found in various stages of weathering and consisted of various polymers, including HDPE, PP, polyethylene terephthalate (PET), and polyamide (PA). Interestingly, our field observations suggest a new plasticrust formation pathway based on plastic burning and filling of rock crevices with molten plastic. The latter was identified as either PP or HDPE. Elements typically found in the sand and seawater (e.g., Na, Cl, Ca, Si, Fe) were identified on the surface of the plastic formations, as well as others that could potentially be associated with the leaching of additives (e.g., Ti, Br). Although the present study contributed to the knowledge concerning the occurrence of the new types of plastic formations, as well as possible formation pathways, there are still many questions to answer. Hence, we encourage future studies to focus on the toxicity that new plastic formations may induce in contrast with conventional plastics, the release of secondary contaminants (e.g., microplastics, additives), and their degradation in the environment. Lastly, standardized sampling and data treatment protocols are required.

The use and disposal of face masks, gloves, face shields, and other types of personal protective equipment (PPE) have increased dramatically due to the ongoing COVID-19 pandemic. Many governments enforce the use of PPE as an efficient and inexpensive way to reduce the transmission of the virus. However, this may pose a new challenge to solid waste management and exacerbate plastic pollution. The aim of the present study was to report the occurrence and distribution of COVID-19-associated PPE along the coast of the overpopulated city of Lima, Peru, and determine the influence of the activities carried out in each study site. In general terms, 138 PPE items were found in 11 beaches during 12 sampling weeks. The density was in the range of 0 to 7.44 × 10−4 PPE m−2. Microplastic release, colonization of invasive species, and entanglement or ingestion by apex predators are some of the potential threats identified. Recreational beaches were the most polluted sites, followed by surfing, and fishing sites. This may be because recreational beaches are many times overcrowded by beachgoers. Additionally, most of the PPE was found to be discarded by beachgoers rather than washed ashore. The lack of environmental awareness, education, and coastal mismanagement may pose a threat to the marine environment through marine litter and plastic pollution. Significant efforts are required to shift towards a sustainable solid waste management. Novel alternatives involve redesigning masks based on degradable plastics and recycling PPE by obtaining liquid fuels through pyrolysis., Graphical abstract Unlabelled Image

In the present contribution, two nationwide surveys of personal protective equipment (PPE) pollution were conducted in Peru and Argentina aiming to provide valuable information regarding the abundance and distribution of PPE in coastal sites. Additionally, PPE items were recovered from the environment and analyzed by Fourier transformed infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM) with Energy dispersive X-ray (EDX), and X-ray diffraction (XRD), and compared to brand-new PPE in order to investigate the chemical and structural degradation of PPE in the environment. PPE density (PPE m−2) found in both countries were comparable to previous studies. FTIR analysis revealed multiple polymer types comprising common PPE, mainly polypropylene, polyamide, polyethylene terephthalate, and polyester. SEM micrographs showed clear weathering signs, such as cracks, cavities, and rough surfaces in face masks and gloves. EDX elemental mapping revealed the presence of elemental additives, such as Ca in gloves and face masks and AgNPs as an antimicrobial agent. Other metals found on the surface of PPE were Mo, P, Ti, and Zn. XRD patterns displayed a notorious decrease in the crystallinity of polypropylene face masks, which could alter its interaction with external contaminants and stability. The next steps in this line of research were discussed., Graphical Abstract ga1

The ongoing COVID-19 pandemic has resulted in an unprecedented form of plastic pollution: personal protective equipment (PPE). Numerous studies have reported the occurrence of PPE in the marine environment. However, their degradation in the environment and consequences are poorly understood. Studies have reported that face masks, the most abundant type of PPE, are significant sources of microplastics due to their fibrous microstructure. The fibrous material (mostly consisting of polypropylene) exhibits physical changes in the environment, leading to its fracture and detachment of microfibers. Most studies have evaluated PPE degradation under controlled laboratory conditions. However, in situ degradation experiments, including the colonization of PPE, are largely lacking. Although ecotoxicological studies are largely lacking, the first attempts to understand the impact of MPs released from face masks showed various types of impacts, such as fertility and reproduction deficiencies in both aquatic and terrestrial organisms.

Marine litter, such as plastic bags, bottles, fabrics, or fishing gear, serve as a shelter for many marine organisms that are likely to colonize artificial substrata. Such assemblages can potentially turn marine litter into vectors of alien invasive species (AIS). Here, we report the abundance and diversity of macroinvertebrates inhabiting marine litter in Peruvian beaches. Results indicate that most of the fouled items found came from land-based sources (81.5%) and Bivalvia was the most abundant class (53.5%), mainly composed of the mussel Semimytilus algosus. No significant differences were found in the abundance and diversity of macroinvertebrates (class level) among sampling sites or sources of litter. Polypropylene and low-density polyethylene items were most frequently found with fouled biota. Although none of the identified species were non-native to the coast of Peru, we discuss marine litter as a potential source of AIS in this region.

Microplastics (

Plastic pollution is one of the major challenges in the Anthropocene. Upon reaching the marine environment, plastic debris is subject to anthropogenic and environmental conditions that result in novel items that vary in composition, physical and chemical characteristics. Here, we reviewed and discussed the potential fate and threat to the environment of four recently described plastic formations: Plastiglomerates, pyroplastics, plasticrusts, and anthropoquinas. The threats identified were mostly related to the release of toxic chemicals and plastic ingestion. Transportation of alien invasive species or microbial pathogens and fragmentation of larger plastics into microplastics (5 mm), potentially reaching marine trophic webs, are suspected as potential impacts based on the characteristics of these plastic formations. Some plastic forms may persist in the environment and voyage across the ocean, while others are denser and less likely to enter the plastic cycle or interact with biota. In the latter case, plastics are expected to become buried in the sediment and incorporate into the geological record. It is necessary to establish sampling protocols or standards that are specific to each plastic formation and start reporting the occurrence of these new plastic categories as such to avoid underestimating plastic pollution in marine environments. It is suggested that monitoring plans include these categories and identify potential sources. Further research must focus on investigating whether the suspected impacts are a matter of concern. In this sense, we have suggested research questions to address the knowledge gaps and have a better understanding of the impacts and distribution of the new plastic forms.

The extensive use of personal protective equipment (PPE) driven by the COVID-19 pandemic has become an important contributor to marine plastic pollution. However, there are very few studies quantifying and characterizing this type of pollution in coastal areas. In the present study, we monitored the occurrence of PPE (face masks, bouffant caps, and gloves) discarded in 13 sites along Cox's Bazar beach, the longest naturally occurring beach in the world. The vast majority of the items were face masks (97.9%), and the mean PPE density across sites was 6.29 × 10-3 PPE m-2. The presence of illegal dumping sites was the main source of PPE, which was mainly located on touristic/recreational beaches. Fishing activity contributed to PPE pollution at a lower level. Poor solid waste management practices in Cox's Bazar demonstrated to be a major driver of PPE pollution. The potential solutions and sustainable alternatives were discussed.

Microplastic pollution is a problem of global scale, posing a threat to marine biota. To determine the current state of microplastic pollution on four popular sandy beaches of the coast of Lima, Peru, a sampling campaign was carried out in both intertidal and supralittoral zones. Microplastic abundance, type, size, color and distribution were recorded. The overall microplastic abundance was of the same order of magnitude as previous data obtained in Peru. Foams were the most abundant (78.3%) microplastic type. Statistical analyses revealed significant differences between sites and zones. High variability of microplastic abundance was found among adjacent beaches and zones. Fourier Transform Infrared Spectroscopy (FTIR) analysis revealed that all foams were identified as polystyrene. The present results revealed an alarming level of microplastics present on Peruvian sandy beaches, but information about the sources, local dynamics and impacts of microplastics in this region are scarce, and thus further research is needed.

Plastic pollution is one of the major issues impacting on the marine environment. Plastic polymers are known to leach industrial chemicals and associated contaminants. In this review, we focused on assessing the global distribution and concentration of two polystyrene-derived contaminants, hexabromocyclododecanes (HBCDs) and styrene oligomers (SOs), in marine sediments and seawater. Overall, most of the studies were carried out in Asia, North America, and Europe. Relatively high concentrations of these contaminants are generally attributed to the proximity of urban cities, plastic industries, polystyrene pollution, and aquaculture. Moreover, the concentrations in sediments are many times higher than in seawater. HBCDs were found to be a negligible risk to marine biota when compared to the ecotoxicological endpoints. However, realistic concentrations of SOs could compromise the wellbeing of certain species in highly polluted sites. The future perspectives and research were discussed.

Plastic pollution is one of the major challenges in the Anthropocene. A plastic waste sub-product, microplastics (

Plastic pollution is regarded as one of the major issues from the Anthropocene epoch. Microplastics ( red > black > green. These results are in lower magnitude levels than those reported in others species from the same region. However, microplastics could transfer from sea urchins to predators in higher trophic levels, like marine mammals. Prospects for further research was discussed.

Microplastics (< 5 mm) are widespread within the marine environment, posing a major threat to marine biota. The aim of the present study was to investigate microplastic contamination in three widespread and highly commercial fish from the coast of Lima, Peru. Peruvian silverside (Odontesthes regia), Peruvian morwong (Cheilodactylus variegatus), and Peruvian grunt (Anisotremus scapularis) specimens were caught off the coast of Lima. Fish stomach and intestines were extracted and submerged in 10% (w/v) KOH, followed by 24 h incubation at 60 °C. The resulting supernatant solution was vacuum filtrated and filters were then observed under an optical microscope and stereomicroscope. Strict quality control and external contamination prevention measures were taken. Microplastic abundance, type and color were recorded. Quality control measures resulted in reduced external contamination. C. variegatus was the most contaminated fish (5.13 ± 0.81 MP/individual), similar to A. scapularis (5.00 ± 0.46 MP/individual), but significantly different to O. regia (0.43 ± 0.11 MP/individual). Fibers were the overall most abundant microplastic type, while blue the dominant color. Results indicated highly contaminated fish, compared to those from other parts of the SE Pacific. Microplastic ingestion by C. variegatus and A. scapularis may be subject to trophic transfer from their natural prey. Highly populated cities and poor solid waste management may contribute to worsen microplastic ingestion by native marine species. The need for further research and a marine microplastic monitoring program was discussed.