Search

Cake layer deposition on a membrane surface can determine both external and internal membrane fouling through negatively affecting the total filtration resistance while exerting a positive effect as a pre-filter. Membranes are usually subjected to a periodic cake layer removal through routine physical cleaning, specifically permeate backwashing of hollow fiber membranes, or enhanced cleaning through, for example, chemically-enhanced backwashing. Physical cake layer removal is crucial for sustaining permeability, yet the effect of different physical cleaning modes remains poorly evaluated. The present work attempts to analyze physical cake layer removal through the application of specific cleaning methods and the impact of these on the subsequent resistance. The constituent contributions to the overall resistance are appraised by means of the Resistances In-Series model, with the aim of producing a robust protocol for quantifying these discrete contributors. The results, based in part on published data, show the proposed approach to reliably determine the relative contribution of the different resistance components to within 0.1 · 10 12  m −1 across a range of different bench and pilot-scale plants, confirming the resilience of the method. [ABSTRACT FROM AUTHOR]

Aged or mature leachate, produced by old landfills, can be very refractory; for this reason mature leachate is difficult to treat alone, but it can be co-treated with sewage or domestic wastewater. The aim of the study was to investigate the feasibility of leachate co-treatment with synthetic wastewater, in terms of process performance and biomass activity, by means of respirometric techniques. Two sequencing batch reactors (SBRs), named SBR1 and SBR2, were fed with synthetic wastewater and two different percentages of landfill leachate (respectively 10% and 50% v v-1 in SBR1 and SBR2). The results showed good chemical oxygen demand (COD) removal efficiency for both reactors, with average COD removals equal to 91.64 and 89.04% respectively for SBR1 and SBR2. Furthermore, both SBRs showed good ammonia-nitrogen (AN) removal efficiencies, higher than 60%, thus confirming the feasibility of leachate co-treatment with a readily biodegradable wastewater. Significant respiration rates were obtained for the heterotrophic population (average values of maximum oxygen uptake rate equal to 37.30 and 56.68 mg O2 L-1 h-1 respectively for SBR1 and SBR2), thus suggesting the feasibility of leachate co-treatment with synthetic wastewater. [ABSTRACT FROM AUTHOR]

The growing increment of the urbanization and, on the other hand, the even more strict effluent limits imposed by the Water Framework Directive for the receiving water body quality state have led to the need for upgrading several existing WWTP. With this respect HMBBR systems are an innovative solution since they allow to upgrade existing high loaded WWTP without building new tanks. However, some uncertainties in their design, maintenance as well as performance have to be addressed due to their recent acquisition compared with well consolidated technologies such as activated sludge systems. In this light, a data gathering campaign on a HMBBR pilot plant has been performed. The aim was to detect the performance of such new technology as well as to survey the influencing effect of the carrier media filling ratio. Indeed, there may be problem of competitiveness between attached and suspended biomass that jointly operate in the same system for carbon and nitrogen removal. Such competitiveness may lead to a worsening of the system efficiency. The results are interesting and the gathered data in the experimental period show a slight difference in terms of performance behaviour, between the two systems (35 and 66%). Such result leads to address the filling ratio choice towards the 35%. [ABSTRACT FROM AUTHOR]

In recent years there has been an increasing interest in the development of hybrid biofilm reactors, especially in the upgrading of existing WWFP that are no longer able to respect concentration limits. In fact, today's challenge is the achievement of a good aquatic state for the receiving water bodies according to the Water Framework Directive requirements, which indeed limit even more the continuous emissions, i.e. coming from WWTP. This paper presents the setting up of a mathematical model for the simulation of a hybrid MBBR system; the model calibration/validation has been carried out considering a field gathering campaign on an experimental pilot plant. The main goal is to gain insight about MBBR processes attempting to overcome main shortcomings in particular referring to the modelling aspects. The model is made up of two connected sub-models for the simulation of the suspended and attached biomass. The model is mainly based on the concepts of the activated sludge model No. 1 (ASM1) for the description of the biokinetic process both for the suspended and for the attached biomass. The results show a good agreement between predicted and observed values both for the attached and for the suspended biomass moreover they are encouraging for further researches. [ABSTRACT FROM AUTHOR]

A membrane bioreactor (MBR) pilot plant was operated in two subsequent experimental periods (namely, Periods I and II) with different start-up and sludge withdrawal strategies to study its peculiar biokinetic behavior by using respirometric techniques. Two extreme operational conditions were chosen to investigate the different biomass activity under dynamic or pseudostationary conditions during and after the start-up phases. Particularly, the MBR pilot plant was operated with the same volumetric loading rate (VLR) and permeate flux but differently managed during the start-up phase. In Period I, the MBR pilot plant was started up without sludge inoculum and operated without sludge withdrawals; on the contrary, in Period II the MBR pilot plant was started up with sludge inoculum and operated with regular sludge withdrawals. The obtained results highlighted that the different start-up strategies significantly affected the value of the yield coefficient, the storage phenomena, the decay coefficient, and the maximum respiration rates of heterotrophic species. More specifically, both experimental periods underlined interesting aspects related to the bacterial behavior under significant stress conditions occurring during a non-steady-state (start-up) phase. [ABSTRACT FROM AUTHOR]

The effect of intermittent aeration (IA) on a MBR system was investigated. The study was aimed at analyzing different working conditions and the influence of different IA cycles on the biological performance of the MBR pilot plant, in terms of organic carbon and ammonium removal as well as extracellular polymeric substances (EPSs) production. The membrane modules were placed in a separate compartment, continuously aerated. This configuration allowed to disconnect from the filtration stage the biological phenomena occurring into the IA bioreactor. The observed results highlighted good efficiencies, in terms of organic carbon and ammonium removal. It was noticed a significant soluble microbial products (SMPs) release, likely related to the higher metabolic stress that anoxic conditions exerted on the biomass. However, the proposed configuration, with the membranes in a separate compartment, allowed to reduce the EPSs in the membrane tank even during the non-aerated phase, thus lowering fouling development. [ABSTRACT FROM AUTHOR]