224 results on '"Di, Hongshuang"'
Search Results
2. Analysis of flatness actuator efficiency in thin strip steel tandem cold rolling by FEM considering the effect of time-varying work roll thermal crown
3. Study on In-Situ Nucleation, Growth Kinetics and Crystallographic Structure of Acicular Ferrite in X100 Pipeline Steel Welds
4. Improving strength and ductility via ausforming combined with austempering through deformation-induced bainite refinement
5. Corrosion resistance and mechanism of X100 pipeline steel laser-metal active gas hybrid welds with Cr containing welding wire in NS4 solution
6. High cycle fatigue properties and fatigue crack propagation behavior of a bainite railway axle steel
7. The strengthening effects and mechanisms of alloying elements on interfaces for multiphase Ni-based superalloys: A first-principles study
8. Novel analytical heat source model for cold rolling based on an energy method and unified yield criterion
9. Tailoring bainitic transformation and enhancing mechanical properties of carbide-free bainitic steel via high-temperature ausforming
10. Machine learning neural-network identification for dynamic recrystallization grains during hot deformation of nickel-based superalloy
11. On the critical strain of thermal-mechanical processing to tailor grain boundary character distribution in INCOLOY 925 alloy
12. Effect of microstructure homogeneity on the impact fracture mechanism of X100 pipeline steel laser–MAG hybrid welds with an alternating magnetic field
13. Effect of root welding heat input on microstructure evolution and fracture mechanism in intercritically reheat-coarse grained heat-affected zone of X80 pipeline steel
14. Simulation and experimental researches on multi-plate rubber pad forming of two-step micro-channel based on different forming driving models
15. Optimization solution of vertical rolling force using unified yield criterion
16. Three-dimensional hot processing map of a nickel-based superalloy (Alloy 925) established by modified artificial neural network model
17. Effect of Ti content on the inclusions, microstructure and fracture mechanism of X100 pipeline steel laser-MAG hybrid welds
18. Study on the mechanism of heat input on the grain boundary distribution and impact toughness in CGHAZ of X100 pipeline steel from the aspect of variant
19. Orientation-Dependent Characteristics for Residual Grains during Hot Deformation of Nickel-Based Alloy 925
20. Effects of deep cryogenic treatment on the microstructure and mechanical properties of an ultrahigh-strength TRIP-aided bainitic steel
21. Effect of secondary peak temperature on microstructure and toughness in ICCGHAZ of laser-arc hybrid welded X100 pipeline steel joints
22. Improving the mechanical properties of PHS laser welded joints by adding Ni foil to suppress δ-ferrite
23. Study on δ-ferrite evolution and properties of laser fusion zone during post-weld heat treatment on Al-Si coated press-hardened steel
24. Micro-mechanisms of the site-specific precipitation behavior of δ-Ni3Nb phase at cavity surface in Ni-based superalloys
25. Enhancing austenite stability in a new medium-Mn steel by combining deep cryogenic treatment and intercritical annealing: An experimental and theoretical study
26. Analysis on surface morphology formation process of Al-Si coated 22MnB5 steel during laser welding
27. Influence of dynamic strain aging on the mechanical properties and microstructural evolution for Alloy 800H during hot deformation
28. A Comparative Analysis on Microstructure and Fracture Mechanism of X100 Pipeline Steel CGHAZ Between Laser Welding and Arc Welding
29. Effect of Heating Rate during Continuous Annealing on Microstructure and Mechanical Properties of High-Strength Dual-Phase Steel
30. Microstructure and properties in dissimilar/similar weld joints between DP780 and DP980 steels processed by fiber laser welding
31. On the Constitutive Modeling of the Hot Deformation Behavior of a High-Mn Twinning-Induced Plasticity Steel
32. Analysis of Hot Rolling with Simplified Weighted Velocity Field and My Criterion
33. Texture and microstructure evolution of Incoloy 800H superalloy during hot rolling and solution treatment
34. Influence of Dew Point on the Selective Oxidation, Microstructure and Mechanical Properties of a High-Al Low-Si Dual Phase Steel during Hot-Dip Galvanizing Process
35. Dislocation interaction with Ω phase in crept Al–Cu–Mg–Ag alloys
36. Flow softening of 253 MA austenitic stainless steel during hot compression at higher strain rates
37. Study on the Thermal History and the Heterogeneities in Microstructure and Mechanical Properties of Directed Energy Deposition-Arc Inconel 718 Alloy
38. Research on the hot deformation behavior of a Fe–Ni–Cr alloy (800H) at temperatures above 1000 °C
39. Effect of martensite morphology and volume fraction on strain hardening and fracture behavior of martensite–ferrite dual phase steel
40. Influence of annealing temperature on mechanical properties and microstructures of a high manganese austenitic steel
41. Dynamic behavior and microstructural evolution during moderate to high strain rate hot deformation of a Fe–Ni–Cr alloy (alloy 800H)
42. Gauge Control
43. Principle of Plasticity Mechanics
44. Temper Rolling
45. Improving Strength-Ductility via Short Austenitization in a Low-Carbon Carbide-Free Bainitic Steel
46. The impact of aging pre-treatment on the hot deformation behavior of alloy 800H at 750 °C
47. On the hot deformation behavior of AISI 420 stainless steel based on constitutive analysis and CSL model
48. Dependence of Grain Size on Mechanical Properties and Microstructures of High Manganese Austenitic Steel
49. Processing, Microstructures and Mechanical Properties of Ultra-high Strength Steel Sheet
50. Advanced High Strength Steels and Their Processes
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.