Search

Fault-tolerant, error-corrected quantum computation is commonly acknowledged to be crucial to the realization of large-scale quantum algorithms that could lead to extremely impactful scientific or commercial results. Achieving a universal set of quantum gate operations in a fault-tolerant, error-corrected framework suffers from a conservation of unpleasantness. In general, no matter what error-correction technique is employed, there is always one element of a universal gate set that carries a significant resource overhead - either in physical qubits, computational time, or both. Specifically, this is due to the application of non-Clifford gates. A common method for realizing these gates for stabilizer codes such as the surface code is a combination of three protocols: state injection, distillation, and gate teleportation. These protocols contribute to the resource overhead compared with logical operations such as a CNOT gate and contribute to the qubit resources for any error-corrected quantum algorithm. In this paper, we introduce a very simple protocol to potentially reduce this overhead for non-Clifford gates: transversal injection. Transversal injection modifies the initial physical states of all data qubits in a stabilizer code before standard encoding and results in the direct preparation of a large class of single qubit states, including resource states for non-Clifford logic gates. Preliminary results hint at high-quality fidelities at larger distances and motivate further research on this technique.

The development of quantum computing systems for large scale algorithms requires targeted error rates un achievable through hardware advancements alone Quantum Error Correction QEC allows us to use systems with a large number of physical qubits to form a fault tolerant system with a lower number of logical qubits and a favourable logical error rate While some gates can be easily implemented in a QEC code transversally there is no code that has a universal set of transversal gates Transversal Injection is a new method of preparing logical non Pauli eigenstates that can be used as resource states for quantum computation State preparation can be done directly in the surface code and has the potential to prepare higher fidelity injected states Compared to other techniques transversal injection can reduce the resource burden for state distillation protocols In this paper the authors present the theory behind this new technique as well as an algorithm for calculating the resulting logical states prepared in the surface code

Quantum computing advantage emerges not from brute force power, but from subtle differences in information processing that can occur for key bottleneck subroutines. In 2019, the Google Quantum AI team performed a landmark experiment demonstrating quantum computational supremacy (Arute et al., 2019) where they performed a quantum computation that, at the time, could not be done on a classical supercomputer. This was remarkable because it was achieved by a processor with only 53 qubits, an observation that emerged from theoretical work which identified that quantum computers could have a massive advantage for certain specially designed benchmarking tasks (Boixo et al., 2018; Bremner et al., 2016).

© 2019 IEEE. The reliable resource estimation and benchmarking of quantum algorithms is a critical component of the development cycle of viable quantum applications for quantum computers of all sizes. Determining resource bottlenecks in algorithms, especially when resource intensive error correction protocols are required, is crucial to reduce the cost of implementing viable algorithms on actual quantum hardware.

© 2018 IOP Publishing Ltd. Lattice surgery is a method to perform quantum computation fault-tolerantly by using operations on boundary qubits between different patches of the planar code. This technique allows for universal planar code computation without eliminating the intrinsic two-dimensional nearest-neighbor properties of the surface code that eases physical hardware implementations. Lattice surgery approaches to algorithmic compilation and optimization have been demonstrated to be more resource efficient for resource-intensive components of a fault-tolerant algorithm, and consequently may be preferable over braid-based logic. Lattice surgery can be extended to the Raussendorf lattice, providing a measurement-based approach to the surface code. In this paper we describe how lattice surgery can be performed on the Raussendorf lattice and therefore give a viable alternative to computation using braiding in measurement-based implementations of topological codes.

© 2018 American Physical Society. Quantum computations are expressed in general as quantum circuits, which are specified by ordered lists of quantum gates. The resulting specifications are used during the optimization and execution of the expressed computations. However, the specification format makes it difficult to verify that optimized or executed computations still conform to the initial gate list specifications: showing the computational equivalence between two quantum circuits expressed by different lists of quantum gates is exponentially complex in the worst case. In order to solve this issue, this work presents a derivation of the specification format tailored specifically for fault-tolerant quantum circuits. The circuits are considered a form consisting entirely of single qubit initializations, cnot gates, and single qubit measurements (ICM form). This format allows, under certain assumptions, to efficiently verify optimized (or implemented) computations. Two verification methods based on checking stabilizer circuit structures are presented.

© 2018 American Physical Society. Surface codes can protect quantum information stored in qubits from local errors as long as the per-operation error rate is below a certain threshold. Here we propose holonomic surface codes by harnessing the quantum holonomy of the system. In our scheme, the holonomic gates are built via auxiliary qubits rather than the auxiliary levels in multilevel systems used in conventional holonomic quantum computation. The key advantage of our approach is that the auxiliary qubits are in their ground state before and after each gate operation, so they are not involved in the operation cycles of surface codes. This provides an advantageous way to implement surface codes for fault-tolerant quantum computation.

© 2018, The Author(s). A recent proposal has shown that it is possible to perform linear-optics quantum computation using a ballistic generation of the lattice. Yet, due to the probabilistic generation of its cluster state, it is not possible to use the fault-tolerant Raussendorf lattice, which requires a lower failure rate during the entanglement-generation process. Previous work in this area showed proof-of-principle linear-optics quantum computation, while this paper presents an approach to it which is more practical, satisfying several key constraints. We develop a classical measurement scheme that purifies a large faulty lattice to a smaller lattice with entanglement faults below threshold. A single application of this method can reduce the entanglement error rate to 7% for an input failure rate of 25%. Thus, we can show that it is possible to achieve fault tolerance for ballistic methods.

© 2017 IOP Publishing Ltd and Deutsche Physikalische Gesellschaft. The yield of physical qubits fabricated in the laboratory is much lower than that of classical transistors in production semiconductor fabrication. Actual implementations of quantum computers will be susceptible to loss in the form of physically faulty qubits. Though these physical faults must negatively affect the computation, we can deal with them by adapting error-correction schemes. In this paper we have simulated statically placed single-fault lattices and lattices with randomly placed faults at functional qubit yields of 80%, 90%, and 95%, showing practical performance of a defective surface code by employing actual circuit constructions and realistic errors on every gate, including identity gates. We extend Stace et al's superplaquettes solution against dynamic losses for the surface code to handle static losses such as physically faulty qubits [1]. The single-fault analysis shows that a static loss at the periphery of the lattice has less negative effect than a static loss at the center. The randomly faulty analysis shows that 95% yield is good enough to build a large-scale quantum computer. The local gate error rate threshold is , and a code distance of seven suppresses the residual error rate below the original error rate at . 90% yield is also good enough when we discard badly fabricated quantum computation chips, while 80% yield does not show enough error suppression even when discarding 90% of the chips. We evaluated several metrics for predicting chip performance, and found that the average of the product of the number of data qubits and the cycle time of a stabilizer measurement of stabilizers gave the strongest correlation with logical error rates. Our analysis will help with selecting usable quantum computation chips from among the pool of all fabricated chips.

© 2017, The Author(s). The traditional method for computation in either the surface code or in the Raussendorf model is the creation of holes or “defects” within the encoded lattice of qubits that are manipulated via topological braiding to enact logic gates. However, this is not the only way to achieve universal, fault-tolerant computation. In this work, we focus on the lattice surgery representation, which realizes transversal logic operations without destroying the intrinsic 2D nearest-neighbor properties of the braid-based surface code and achieves universality without defects and braid-based logic. For both techniques there are open questions regarding the compilation and resource optimization of quantum circuits. Optimization in braid-based logic is proving to be difficult and the classical complexity associated with this problem has yet to be determined. In the context of lattice-surgery-based logic, we can introduce an optimality condition, which corresponds to a circuit with the lowest resource requirements in terms of physical qubits and computational time, and prove that the complexity of optimizing a quantum circuit in the lattice surgery model is NP-hard.

© 2017 IOP Publishing Ltd and Deutsche Physikalische Gesellschaft. In this paper we outline a method for a compiler to translate any non fault tolerant quantum circuit to the geometric representation of the lattice surgery error-correcting code using inherent merge and split operations. Since the efficiency of state distillation procedures has not yet been investigated in the lattice surgery model, their translation is given as an example using the proposed method. The resource requirements seem comparable or better to the defect-based state distillation process, but modularity and eventual implementability allow the lattice surgery model to be an interesting alternative to braiding.

© 2017 IOP Publishing Ltd. Fault-tolerant quantum error correction is a necessity for any quantum architecture destined to tackle interesting, large-scale problems. Its theoretical formalism has been well founded for nearly two decades. However, we still do not have an appropriate compiler to produce a fault-tolerant, error-corrected description from a higher-level quantum circuit for state-of the-art hardware models. There are many technical hurdles, including dynamic circuit constructions that occur when constructing fault-tolerant circuits with commonly used error correcting codes. We introduce a package that converts high-level quantum circuits consisting of commonly used gates into a form employing all decompositions and ancillary protocols needed for fault-tolerant error correction. We call this form the (I)initialisation, (C)NOT, (M)measurement form (ICM) and consists of an initialisation layer of qubits into one of four distinct states, a massive, deterministic array of CNOT operations and a series of time-ordered X- or Z-basis measurements. The form allows a more flexible approach towards circuit optimisation. At the same time, the package outputs a standard circuit or a canonical geometric description which is a necessity for operating current state-of-the-art hardware architectures using topological quantum codes.

2017 © The Authors, some rights reserved. The availability of a universal quantum computer may have a fundamental impact on a vast number of research fields and on society as a whole. An increasingly large scientific and industrial community is working toward the realization of such a device. An arbitrarily large quantum computer may best be constructed using a modular approach. We present a blueprint for a trapped ion–based scalable quantum computer module, making it possible to create a scalable quantum computer architecture based on long-wavelength radiation quantum gates. The modules control all operations as stand-alone units, are constructed using silicon microfabrication techniques, and are within reach of current technology. To perform the required quantum computations, the modules make use of long-wavelength radiation–based quantum gate technology. To scale this microwave quantum computer architecture to a large size, we present a fully scalable design that makes use of ion transport between different modules, thereby allowing arbitrarily many modules to be connected to construct a large-scale device. A high error–threshold surface error correction code can be implemented in the proposed architecture to execute fault-tolerant operations. With appropriate adjustments, the proposed modules are also suitable for alternative trapped ion quantum computer architectures, such as schemes using photonic interconnects.

Networked entanglement is an essential component for a plethora of quantum computation and communication protocols. Direct transmission of quantum signals over long distances is prevented by fibre attenuation and the no-cloning theorem, motivating the development of quantum repeaters, designed to purify entanglement, extending its range. Quantum repeaters have been demonstrated over short distances, but error-corrected, global repeater networks with high bandwidth require new technology. Here we show that error corrected quantum memories installed in cargo containers and carried by ship can provide a exible connection between local networks, enabling low-latency, high-fidelity quantum communication across global distances at higher bandwidths than previously proposed. With demonstrations of technology with sufficient fidelity to enable topological error-correction, implementation of the quantum memories is within reach, and bandwidth increases with improvements in fabrication. Our approach to quantum networking avoids technological restrictions of repeater deployment, providing an alternate path to a worldwide Quantum Internet.

Researchers are fabricating quantum processors powerful enough to execute small instances of quantum algorithms. Scalability concerns are motivating distributed-memory multicomputer architectures, and experimental efforts have demonstrated some of the building blocks for such a design. Numberous systems are emerging with the goal of enabling local and distributed quantum computing.

Quantum computing technology has reached a second renaissance in the past five years. Increased interest from both the private and public sector combined with extraordinary theoretical and experimental progress has solidified this technology as a major advancement in the 21st century. As anticipated my many, some of the first realizations of quantum computing technology has occured over the cloud, with users logging onto dedicated hardware over the classical internet. Recently, IBM has released the Quantum Experience, which allows users to access a five-qubit quantum processor. In this paper we take advantage of this online availability of actual quantum hardware and present four quantum information experiments. We utilize the IBM chip to realize protocols in quantum error correction, quantum arithmetic, quantum graph theory, and fault-tolerant quantum computation by accessing the device remotely through the cloud. While the results are subject to significant noise, the correct results are returned from the chip. This demonstrates the power of experimental groups opening up their technology to a wider audience and will hopefully allow for the next stage of development in quantum information technology.

Quantum information processing is expressed using quantum bits (qubits) and quantum gates which are arranged in terms of quantum circuits. Here, each qubit is associated with a quantum circuit wire which is used to conduct the desired operations. Most of the existing quantum circuits allocate a single quantum circuit wire for each qubit and hence introduce significant overhead. In fact, qubits are usually not needed during the entire computation, only between their initialization and measurement. Before and after that, corresponding wires may be used by other qubits. In this work, we propose a solution which exploits this fact in order to optimize the design of quantum circuits with respect to the required wires. To this end, we introduce a representation of the lifetimes of all qubits which is used to analyze the respective need for wires. Based on this analysis, a method is proposed which "recycles" the available wires and, as a result, reduces the size of the resulting circuit. Numerical tests based on established reversible and fault-tolerant quantum circuits confirm that the proposed solution reduces the number of wires by more than 90% compared to unoptimized quantum circuits.

Given a quantum algorithm, it is highly nontrivial to devise an efficient sequence of physical gates implementing the algorithm on real hardware and incorporating topological quantum error correction. In this paper, we present a first step towards this goal, focusing on generating correct and simple arrangements of topological structures that correspond to a given quantum circuit and largely neglecting their efficiency. We detail the many challenges that will need to be tackled in the pursuit of efficiency. The software source code can be consulted at https://github.com/alexandrupaler/tqec.

In this article we present a simple repeater scheme based on the negatively-charged nitrogen vacancy centre in diamond. Each repeater node is built from modules comprising an optical cavity containing a single NV(-), with one nuclear spin from (15)N as quantum memory. The module uses only deterministic processes and interactions to achieve high fidelity operations (>99%), and modules are connected by optical fiber. In the repeater node architecture, the processes between modules by photons can be in principle deterministic, however current limitations on optical components lead the processes to be probabilistic but heralded. Our resource-modest repeater architecture contains two modules at each node, and the repeater nodes are then connected by entangled photon pairs. We discuss the performance of such a quantum repeater network with modest resources and then incorporate more resource-intense strategies step by step. Our architecture should allow large-scale quantum information networks with existing or near future technology.

Programming a quantum computer is a task as baffling as quantum mechanics itself. But it now looks like a simple 3-D puzzle may hold the solution.

Quantum technology based on photons has emerged as one of the most promising platforms for quantum information processing, having already been used in proof-of-principle demonstrations of quantum communication and quantum computation. However, the scalability of this technology depends on the successful integration of experimentally feasible devices in an architecture that tolerates realistic errors and imperfections. Here, we analyse an atom-optical architecture for quantum computation designed to meet the requirements of scalability. The architecture is based on a modular atom-cavity device that provides an effective photon-photon interaction, allowing for the rapid, deterministic preparation of a large class of entangled states. We begin our analysis at the physical level, where we outline the experimental cavity quantum electrodynamics requirements of the basic device. Then, we describe how a scalable network of these devices can be used to prepare a three-dimensional topological cluster state, sufficient for universal fault-tolerant quantum computation. We conclude at the application level, where we estimate the system-level requirements of the architecture executing an algorithm compiled for compatibility with the topological cluster state

State distillation is the process of taking a number of imperfect copies of a particular quantum state and producing fewer better copies. Until recently, the lowest overhead method of distilling states produced a single improved [formula: see text] state given 15 input copies. New block code state distillation methods can produce k improved [formula: see text] states given 3k + 8 input copies, potentially significantly reducing the overhead associated with state distillation. We construct an explicit surface code implementation of block code state distillation and quantitatively compare the overhead of this approach to the old. We find that, using the best available techniques, for parameters of practical interest, block code state distillation does not always lead to lower overhead, and, when it does, the overhead reduction is typically less than a factor of three.