Search

Top‐down estimates of CO₂ fluxes are typically constrained by either surface‐based or space‐based CO₂ observations. Both of these measurement types have spatial and temporal gaps in observational coverage that can lead to differences in inferred fluxes. Assimilating both surface‐based and space‐based measurements concurrently in a flux inversion framework improves observational coverage and reduces sampling related artifacts. This study examines the consistency of flux constraints provided by these different observations and the potential to combine them by performing a series of 6‐year (2010–2015) CO₂ flux inversions. Flux inversions are performed assimilating surface‐based measurements from the in situ and flask network, measurements from the Total Carbon Column Observing Network (TCCON), and space‐based measurements from the Greenhouse Gases Observing Satellite (GOSAT), or all three data sets combined. Combining the data sets results in more precise flux estimates for subcontinental regions relative to any of the data sets alone. Combining the data sets also improves the accuracy of the posterior fluxes, based on reduced root‐mean‐square differences between posterior flux‐simulated CO₂ and aircraft‐based CO₂ over midlatitude regions (0.33–0.56 ppm) in comparison to GOSAT (0.37–0.61 ppm), TCCON (0.50–0.68 ppm), or in situ and flask measurements (0.46–0.56 ppm) alone. These results suggest that surface‐based and GOSAT measurements give complementary constraints on CO₂ fluxes in the northern extratropics and can be combined in flux inversions to improve constraints on regional fluxes. This stands in contrast with many earlier attempts to combine these data sets and suggests that improvements in the NASA Atmospheric CO₂ Observations from Space (ACOS) retrieval algorithm have significantly improved the consistency of space‐based and surface‐based flux constraints.

TanSat is the 1st Chinese carbon dioxide (CO$_{2}$) measurement satellite, launched in 2016. In this study, the University of Leicester Full Physics (UoL-FP) algorithm is implemented for TanSat nadir mode XCO$_{2}$ retrievals. We develop a spectrum correction method to reduce the retrieval errors by the online fitting of an 8th order Fourier series. The spectrum-correction model and its a priori parameters are developed by analyzing the solar calibration measurement. This correction provides a significant improvement to the O$_{2}$ A band retrieval. Accordingly, we extend the previous TanSat single CO$_{2}$ weak band retrieval to a combined O$_{2}$ A and CO$_{2}$ weak band retrieval. A Genetic Algorithm (GA) has been applied to determine the threshold values of post-screening filters. In total, 18.3% of the retrieved data is identified as high quality compared to the original measurements. The same quality control parameters have been used in a footprint independent multiple linear regression bias correction due to the strong correlation with the XCO$_{2}$ retrieval error. Twenty sites of the Total Column Carbon Observing Network (TCCON) have been selected to validate our new approach for the TanSat XCO$_{2}$ retrieval. We show that our new approach produces a significant improvement on the XCO$_{2}$ retrieval accuracy and precision when compared to TCCON with an average bias and RMSE of ���0.08 ppm and 1.47 ppm, respectively. The methods used in this study can help to improve the XCO$_{2}$ retrieval from TanSat and subsequently the Level-2 data production, and hence will be applied in the TanSat operational XCO$_{2}$ processing.

We present lower/middle tropospheric column-averaged CH4 mole fraction time series measured by nine globally distributed ground-based FTIR (Fourier transform infrared) remote sensing experiments of the Network for the Detection of Atmospheric Composition Change (NDACC). We show that these data are well representative of the tropospheric regional-scale CH4 signal, largely independent of the local surface small-scale signals, and only weakly dependent on upper tropospheric/lower stratospheric (UTLS) CH4 variations. In order to achieve the weak dependency on the UTLS, we use an a posteriori correction method. We estimate a typical precision for daily mean values of about 0.5% and a systematic error of about 2.5%. The theoretical assessments are complemented by an extensive empirical study. For this purpose, we use surface in situ CH4 measurements made within the Global Atmosphere Watch (GAW) network and compare them to the remote sensing data. We briefly discuss different filter methods for removing the local small-scale signals from the surface in situ data sets in order to obtain the in situ regional-scale signals. We find good agreement between the filtered in situ and the remote sensing data. The agreement is consistent for a variety of timescales that are interesting for CH4 source/sink research: day-to-day, monthly, and inter-annual. The comparison study confirms our theoretical estimations and proves that the NDACC FTIR measurements can provide valuable data for investigating the cycle of CH4.

An automated Fourier Transform Spectroscopic (FTS) solar observatory was established in Darwin, Australia in August 2005. The laboratory is part of the Total Carbon Column Observing Network, and measures atmospheric column abundances of CO2 and O2 and other gases. Measured CO2 columns were calibrated against integrated aircraft profiles obtained during the TWP-ICE campaign in January–February 2006, and show good agreement with calibrations for a similar instrument in Park Falls, Wisconsin. A clear-sky low airmass relative precision of 0.1% is demonstrated in the CO2 and O2 retrieved column-averaged volume mixing ratios. The 1% negative bias in the FTS XCO2 relative to the World Meteorological Organization (WMO) calibrated in situ scale is within the uncertainties of the NIR spectroscopy and analysis.

NASA's Orbiting Carbon Observatory-2 (OCO-2) has been measuring carbon dioxide column-averaged dry-air mole fraction, X$_{CO_{2}}$, in the Earth's atmosphere for over 2 years. In this paper, we describe the comparisons between the first major release of the OCO-2 retrieval algorithm (B7r) and X$_{CO_{2}}$ from OCO-2's primary ground-based validation network: the Total Carbon Column Observing Network (TCCON). The OCO-2 X$_{CO_{2}}$ retrievals, after filtering and bias correction, agree well when aggregated around and coincident with TCCON data in nadir, glint, and target observation modes, with absolute median differences less than 0.4 ppm and RMS differences less than 1.5 ppm. After bias correction, residual biases remain. These biases appear to depend on latitude, surface properties, and scattering by aerosols. It is thus crucial to continue measurement comparisons with TCCON to monitor and evaluate the OCO-2 X$_{CO_{2}}$ data quality throughout its mission.

We investigate factors that drive the variability in total column CO2 at the Total Carbon Column Observing Network sites in the Southern Hemisphere using fluxes tagged by process and by source region from the CarbonTracker analysed product as well as the Simple Biosphere model. We show that the terrestrial biosphere is the largest driver of variability in the Southern Hemisphere column CO2. However, it does not dominate in the same fashion as in the Northern Hemisphere. Local- and hemispheric-scale biomass burning can also play an important role, particularly at the tropical site, Darwin. The magnitude of seasonal variability in the column-average dry-air mole fraction of CO2, XCO2, is also much smaller in the Southern Hemisphere and comparable in magnitude to the annual increase. Comparison of measurements to the model simulations highlights that there is some discrepancy between the two time series, especially in the early part of the Darwin data record. We show that this mismatch is most likely due to erroneously estimated local fluxes in the Australian tropical region, which are associated with enhanced photosynthesis caused by early rainfall during the tropical monsoon season.

We present lower/middle tropospheric columnaveraged CH4 mole fraction time series measured by nine globally distributed ground based FTIR (Fourier transform infrared) remote sensing experiments of the Network for the Detection of Atmospheric Composition Change (NDACC). We show that these data are well representative of the tropospheric regional scale CH4 signal largely independent of the local surface small scale signals and only weakly dependent on upper tropospheric/lower stratospheric (UTLS) CH4 variations. In order to achieve the weak dependency on the UTLS we use an a posteriori correction method. We estimate a typical precision for daily mean values of about 0.5 and a systematic error of about 2.5 . The theoretical assessments are complemented by an extensive empirical study. For this purpose we use surface in situ CH4 measurements made within the Global Atmosphere Watch (GAW) briefly discuss different filter methods for removing the local small scale signals from the surface in situ data sets in order to obtain the in situ regional scale signals. We find good agreement between the filtered in situ and the remote sensing data. The agreement is consistent for a variety of timescales that are interesting for CH4 source/sink research: day to day monthly and inter annual. The comparison study confirms our theoretical estimations and proves that the NDACC FTIR measurements can provide valuable data for investigating the cycle of CH4.

資料番号: PA1210067000

We have developed an improved version of the National Institute for Environmental Studies (NIES) three-dimensional chemical transport model (TM) designed for accurate tracer transport simulations in the stratosphere, using a hybrid sigma-isentropic (σ-θ) vertical coordinate that employs both terrain-following and isentropic parts switched smoothly around the tropopause. The air-ascending rate was derived from the effective heating rate and was used to simulate vertical motion in the isentropic part of the grid (above level 350 K), which was adjusted to fit to the observed age of the air in the stratosphere. Multi-annual simulations were conducted using the NIES TM to evaluate vertical profiles and dry-air column-averaged mole fractions of CO2 and CH4. Comparisons with balloon-borne observations over Sanriku (Japan) in 2000–2007 revealed that the tracer transport simulations in the upper troposphere and lower stratosphere are performed with accuracies of ~5% for CH4 and SF6, and ~1% for CO2 compared with the observed volume-mixing ratios. The simulated column-averaged dry air mole fractions of atmospheric carbon dioxide (XCO2) and methane (XCH4) were evaluated against daily ground-based high-resolution Fourier Transform Spectrometer (FTS) observations measured at twelve sites of the Total Carbon Column Observing Network (TCCON) (Bialystok, Bremen, Darwin, Garmisch, Izaña, Lamont, Lauder, Orleans, Park Falls, Sodankylä, Tsukuba, and Wollongong) between January 2009 and January 2011. The comparison shows the model's ability to reproduce the site-dependent seasonal cycles as observed by TCCON, with correlation coefficients typically on the order 0.8–0.9 and 0.4–0.8 for XCO2 and XCH4, respectively, and mean model biases of ±0.2% and ±0.5%, excluding Sodankylä, where strong biases are found. The ability of the model to capture the tracer total column mole fractions is strongly dependent on the model's ability to reproduce seasonal variations in tracer concentrations in the planetary boundary layer (PBL). We found a marked difference in the model's ability to reproduce near-surface concentrations at sites located some distance from multiple emission sources and where high emissions play a notable role in the tracer's budget. Comparisons with aircraft observations over Surgut (West Siberia), in an area with high emissions of methane from wetlands, show contrasting model performance in the PBL and in the free troposphere. Thus, the PBL is another critical region for simulating the tracer total column mole fractions.

Estimates of the natural CO2 flux over Europe inferred from in situ measurements of atmospheric CO2 mole fraction have been used previously to check top-down flux estimates inferred from space-borne dry-air CO2 column (XCO2) retrievals. Several recent studies have shown that CO2 fluxes inferred from XCO2 data from the Japanese Greenhouse gases Observing SATellite (GOSAT) and the Scanning Imaging Absorption Spectrometer for Atmospheric CHartographY (SCIAMACHY) have larger seasonal amplitudes and a more negative annual net CO2 balance than those inferred from the in situ data. The cause of this elevated European uptake of CO2 is still unclear, but some recent studies have suggested that this is a genuine scientific phenomenon. Here, we put forward an alternative hypothesis and show that realistic levels of bias in GOSAT data can result in an erroneous estimate of elevated uptake over Europe. We use a global flux inversion system to examine the relationship between measurement biases and estimates of CO2 uptake from Europe. We establish a reference in situ inversion that uses an Ensemble Kalman Filter (EnKF) to assimilate conventional surface mole fraction observations and XCO2 retrievals from the surface-based Total Carbon Column Observing Network (TCCON). We use the same EnKF system to assimilate two independent versions of GOSAT XCO2 data. We find that the GOSAT-inferred European terrestrial biosphere uptake peaks during the summer, similar to the reference inversion, but the net annual flux is 1.40 ± 0.19 GtC a−1 compared to a value of 0.58 ± 0.14 GtC a−1 for our control inversion that uses only in situ data. To reconcile these two estimates, we perform a series of numerical experiments that assimilate observations with added biases or assimilate synthetic observations for which part or all of the GOSAT XCO2 data are replaced with model data. We find that for our global flux inversions, a large portion (60–90 %) of the elevated European uptake inferred from GOSAT data in 2010 is due to retrievals outside the immediate European region, while the remainder can largely be explained by a sub-ppm retrieval bias over Europe. We use a data assimilation approach to estimate monthly GOSAT XCO2 biases from the joint assimilation of in situ observations and GOSAT XCO2 retrievals. The inferred biases represent an estimate of systematic differences between GOSAT XCO2 retrievals and the inversion system at regional or sub-regional scales. We find that a monthly varying bias of up to 0.5 ppm can explain an overestimate of the annual sink of up to 0.20 GtC a−1. Our results highlight the sensitivity of CO2 flux estimates to regional observation biases, which have not been fully characterized by the current observation network. Without further dedicated measurements we cannot prove or disprove that European ecosystems are taking up a larger-than-expected amount of CO2. More robust inversion systems are also needed to infer consistent fluxes from multiple observation types.

Understanding the atmospheric distribution of water (H$_{2}$O) is crucial for global warming studies and climate change mitigation. In this context, reliable satellite data are extremely valuable for their global and continuous coverage, once their quality has been assessed. Short-wavelength infrared spectra are acquired by the Thermal And Near-infrared Sensor for carbon Observation-Fourier Transform Spectrometer (TANSO-FTS) aboard the Greenhouse gases Observing Satellite (GOSAT). From these, column-averaged dry-air mole fractions of carbon dioxide, methane and water vapor (XH$_{2}$O) have been retrieved at the National Institute for Environmental Studies (NIES, Japan) and are available as a Level 2 research product. We compare the NIES XH$_{2}$O data, Version 02.21, with retrievals from the ground-based Total Carbon Column Observing Network (TCCON, Version GGG2014). The datasets are in good overall agreement, with GOSAT data showing a slight global low bias of -3.1%± 17.7%, reasonable consistency over different locations (station bias of -3.1%±9.5%) and very good correlation with TCCON (R = 0.95). We identified two potential sources of discrepancy between the NIES and TCCON retrievals over land. While the TCCON XH$_{2}$O amounts can reach 6000–6500ppm when the atmospheric water content is high, the correlated NIES values do not exceed 5500 ppm. This could be due to a dry bias of TANSO-FTS in situations of high humidity and aerosol content. We also determined that the GOSAT-TCCON differences directly depend on the altitude difference between the TANSO-FTS footprint and the TCCON site. Further analysis will account for these biases, but the NIES V02.21 XH$_{2}$O product, after public release, can already be useful for water cycle studies.

This study presents results from the European Centre for Medium-Range Weather Forecasts (ECMWF) carbon dioxide (CO₂) analysis system where the atmospheric CO₂ is controlled through the assimilation of column-averaged dry-air mole fractions of CO₂ (XCO₂) from the Greenhouse gases Observing Satellite (GOSAT). The analysis is compared to a free-run simulation (without assimilation of XCO₂), and they are both evaluated against XCO₂ data from the Total Carbon Column Observing Network (TCCON). We show that the assimilation of the GOSAT XCO₂ product from the Bremen Optimal Estimation Differential Optical Absorption Spectroscopy (BESD) algorithm during the year 2013 provides XCO₂ fields with an improved mean absolute error of 0.6 parts per million (ppm) and an improved station-to-station bias deviation of 0.7 ppm compared to the free run (1.1 and 1.4 ppm, respectively) and an improved estimated precision of 1 ppm compared to the GOSAT BESD data (3.3 ppm). We also show that the analysis has skill for synoptic situations in the vicinity of frontal systems, where the GOSAT retrievals are sparse due to cloud contamination. We finally computed the 10-day forecast from each analysis at 00:00 UTC, and we demonstrate that the CO₂ forecast shows synoptic skill for the largest-scale weather patterns (of the order of 1000 km) even up to day 5 compared to its own analysis.

Global observations of column-averaged dry air mole fractions of carbon dioxide (CO2), denoted by XCO2 , retrieved from SCIAMACHY on-board ENVISAT can provide important and missing global information on the distribution and magnitude of regional CO2 surface fluxes. This application has challenging precision and accuracy requirements. In a previous publication (Heymann et al., 2012), it has been shown by analysing seven years of SCIAMACHY WFM-DOAS XCO2 (WFMDv2.1) that unaccounted thin cirrus clouds can result in significant errors. In order to enhance the quality of the SCIAMACHY XCO2 data product, we have developed a new version of the retrieval algorithm (WFMDv2.2), which is described in this manuscript. It is based on an improved cloud filtering and correction method using the 1.4 μm strong water vapour absorption and 0.76 μm O2-A bands. The new algorithm has been used to generate a SCIAMACHY XCO2 data set covering the years 2003–2009. The new XCO2 data set has been validated using ground-based observations from the Total Carbon Column Observing Network (TCCON). The validation shows a significant improvement of the new product (v2.2) in comparison to the previous product (v2.1). For example, the standard deviation of the difference to TCCON at Darwin, Australia, has been reduced from 4 ppm to 2 ppm. The monthly regional-scale scatter of the data (defined as the mean intra-monthly standard deviation of all quality filtered XCO2 retrievals within a radius of 350 km around various locations) has also been reduced, typically by a factor of about 1.5. Overall, the validation of the new WFMDv2.2 XCO2 data product can be summarised by a single measurement precision of 3.8 ppm, an estimated regional-scale (radius of 500 km) precision of monthly averages of 1.6 ppm and an estimated regional-scale relative accuracy of 0.8 ppm. In addition to the comparison with the limited number of TCCON sites, we also present a comparison with NOAA's global CO2 modelling and assimilation system CarbonTracker. This comparison also shows significant improvements especially over the Southern Hemisphere.

資料番号: PA1210059000

資料番号: PA1110063000

資料番号: PA1110076000

Model simulations of column-averaged methane mixing ratios (XCH4) are extensively used for inverse estimates of methane (CH4) emissions from atmospheric measurements. Our study shows that virtually all chemical transport models (CTM) used for this purpose are affected by stratospheric model-transport errors. We quantify the impact of such model transport errors on the simulation of stratospheric CH4 concentrations via an a posteriori correction method. This approach compares measurements of the mean age of air with modeled age and expresses the difference in terms of a correction to modeled stratospheric CH4 mixing ratios. We find age differences up to ~ 3 years yield to a bias in simulated CH4 of up to 250 parts per billion (ppb). Comparisons between model simulations and ground-based XCH4 observations from the Total Carbon Column Network (TCCON) reveal that stratospheric model-transport errors cause biases in XCH4 of ~ 20 ppb in the midlatitudes and ~ 27 ppb in the arctic region. Improved overall as well as seasonal model-observation agreement in XCH4 suggests that the proposed, age-of-air-based stratospheric correction is reasonable. The latitudinal model bias in XCH4 is supposed to reduce the accuracy of inverse estimates using satellite-derived XCH4 data. Therefore, we provide an estimate of the impact of stratospheric model-transport errors in terms of CH4 flux errors. Using a one-box approximation, we show that average model errors in stratospheric transport correspond to an overestimation of CH4 emissions by ~ 40 % (~ 7 Tg yr−1) for the arctic, ~ 5 % (~ 7 Tg yr−1) for the northern, and ~ 60 % (~ 7 Tg yr−1) for the southern hemispheric mid-latitude region. We conclude that an improved modeling of stratospheric transport is highly desirable for the joint use with atmospheric XCH4 observations in atmospheric inversions.

Estimates of the natural CO2 flux over Europe inferred from in situ measurements of atmospheric CO2 mole fraction have been used previously to check top-down flux estimates inferred from space-borne dry-air CO2 column (XCO2) retrievals. Recent work has shown that CO2 fluxes inferred from XCO2 data from the Japanese Greenhouse gases Observing SATellite (GOSAT) have a larger seasonal amplitude and a more negative annual net CO2 balance than those inferred from the in situ data. The causes of this enhanced European CO2 uptake have since become the focus of recent studies. We show this elevated uptake over Europe could largely be explained by mis-fitting data due to regional biases. We establish a reference in situ inversion that uses an Ensemble Kalman Filter (EnKF) to assimilate surface flask data and the XCO2 data from the surface-based Total Carbon Column Observing Network (TCCON). The same EnKF system is also used to assimilate two, independent versions of GOSAT XCO2 data. We find that the GOSAT-inferred European terrestrial biosphere uptake peaks during the summer, similar to the reference inversion, but the net annual flux is 1.18 ± 0.1 GtC a−1 compared to a value of 0.56 ± 0.1 GtC a−1 for our control inversion that uses only in situ data. To reconcile these two estimates, we have performed a series of numerical experiments that assimilate observations with biases or assimilate synthetic observations for which part or all of the GOSAT XCO2 data are replaced with model data. We find that 50–80% of the elevated European uptake in 2010 inferred from GOSAT data is due to retrievals outside the immediate European region, while most of the remainder can be explained by a sub-ppm retrieval bias over Europe. We have used data assimilation techniques to estimate monthly GOSAT XCO2 biases from the joint assimilation of in situ observations and GOSAT XCO2 retrievals. We find a monthly varying bias of up to 0.5 ppm can explain an overestimate of the annual sink of up to 0.18 GtC a−1.

Measurements of the atmospheric HDO/H$_{2}$O ratio help us to better understand the hydrological cycle and improve models to correctly simulate tropospheric humidity and therefore climate change. We present an updated version of the column-averaged HDO/H$_{2}$O ratio data set from the SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY). The data set is extended with 2 additional years, now covering 2003–2007, and is validated against co-located ground-based total column δD measurements from Fourier transform spectrometers (FTS) of the Total Carbon Column Observing Network (TCCON) and the Network for the Detection of Atmospheric Composition Change (NDACC, produced within the framework of the MUSICA project). Even though the time overlap among the available data is not yet ideal, we determined a mean negative bias in SCIAMACHY δD of -35±30‰ compared to TCCON and -69±15‰ compared to MUSICA (the uncertainty indicating the station-to-station standard deviation). The bias shows a latitudinal dependency, being largest (~-60 to -80 ‰) at the highest latitudes and smallest (~-20 to -30 ‰) at the lowest latitudes. We have tested the impact of an offset correction to the SCIAMACHY HDO and H$_{2}$O columns. This correction leads to a humidity- and latitude-dependent shift in δD and an improvement of the bias by 27 ‰, although it does not lead to an improved correlation with the FTS measurements nor to a strong reduction of the latitudinal dependency of the bias. The correction might be an improvement for dry, high-altitude areas, such as the Tibetan Plateau and the Andes region. For these areas, however, validation is currently impossible due to a lack of ground stations. The mean standard deviation of single-sounding SCIAMACHY–FTS differences is ~115 ‰, which is reduced by a factor ~2 when we consider monthly means. When we relax the strict matching of individual measurements and focus on the mean seasonalities using all available FTS data, we find that the correlation coefficients between SCIAMACHY and the FTS networks improve from 0.2 to 0.7–0.8. Certain ground stations show a clear asymmetry in δD during the transition from the dry to the wet season and back, which is also detected by SCIAMACHY. This asymmetry points to a transition in the source region temperature or location of the water vapour and shows the added information that HDO/H$_{2}$O measurements provide when used in combination with variations in humidity.

The Total Carbon Column Observing Network (TCCON) is a global ground-based network of Fourier transform spectrometers that produce precise measurements of column-averaged dry-air mole fractions of atmospheric methane (CH₄). Temporal variability in the total column of CH₄ due to stratospheric dynamics obscures fluctuations and trends driven by tropospheric transport and local surface fluxes that are critical for understanding CH₄ sources and sinks. We reduce the contribution of stratospheric variability from the total column average by subtracting an estimate of the stratospheric CH₄ derived from simultaneous measurements of hydrogen fluoride (HF). HF provides a proxy for stratospheric CH₄ because it is strongly correlated to CH₄ in the stratosphere, has an accurately known tropospheric abundance (of zero), and is measured at most TCCON stations. The stratospheric partial column of CH₄ is calculated as a function of the zonal and annual trends in the relationship between CH₄ and HF in the stratosphere, which we determine from ACE-FTS satellite data. We also explicitly take into account the CH₄ column averaging kernel to estimate the contribution of stratospheric CH₄ to the total column. The resulting tropospheric CH₄ columns are consistent with in situ aircraft measurements and augment existing observations in the troposphere.

Column-averaged dry-air mole fractions of carbon dioxide and methane have been retrieved from spectra acquired by the TANSO-FTS (Thermal And Near-infrared Sensor for carbon Observations-Fourier Transform Spectrometer) and SCIAMACHY (Scanning Imaging Absorption Spectrometer for Atmospheric Cartography) instruments on board GOSAT (Greenhouse gases Observing SATellite) and ENVISAT (ENVIronmental SATellite), respectively, using a range of European retrieval algorithms. These retrievals have been compared with data from ground-based high-resolution Fourier transform spectrometers (FTSs) from the Total Carbon Column Observing Network (TCCON). The participating algorithms are the weighting function modified differential optical absorption spectroscopy (DOAS) algorithm (WFMD, University of Bremen), the Bremen optimal estimation DOAS algorithm (BESD, University of Bremen), the iterative maximum a posteriori DOAS (IMAP, Jet Propulsion Laboratory (JPL) and Netherlands Institute for Space Research algorithm (SRON)), the proxy and full-physics versions of SRON's RemoTeC algorithm (SRPR and SRFP, respectively) and the proxy and full-physics versions of the University of Leicester's adaptation of the OCO (Orbiting Carbon Observatory) algorithm (OCPR and OCFP, respectively). The goal of this algorithm inter-comparison was to identify strengths and weaknesses of the various so-called round- robin data sets generated with the various algorithms so as to determine which of the competing algorithms would proceed to the next round of the European Space Agency's (ESA) Greenhouse Gas Climate Change Initiative (GHG-CCI) project, which is the generation of the so-called Climate Research Data Package (CRDP), which is the first version of the Essential Climate Variable (ECV) "greenhouse gases" (GHGs). For XCO₂, all algorithms reach the precision requirements for inverse modelling (< 8 ppm), with only WFMD having a lower precision (4.7 ppm) than the other algorithm products (2.4–2.5 ppm). When looking at the seasonal relative accuracy (SRA, variability of the bias in space and time), none of the algorithms have reached the demanding < 0.5 ppm threshold. For XCH₄, the precision for both SCIAMACHY products (50.2 ppb for IMAP and 76.4 ppb for WFMD) fails to meet the < 34 ppb threshold for inverse modelling, but note that this work focusses on the period after the 2005 SCIAMACHY detector degradation. The GOSAT XCH₄ precision ranges between 18.1 and 14.0 ppb. Looking at the SRA, all GOSAT algorithm products reach the < 10 ppm threshold (values ranging between 5.4 and 6.2 ppb). For SCIAMACHY, IMAP and WFMD have a SRA of 17.2 and 10.5 ppb, respectively.

Within the NDACC (Network for the Detection of Atmospheric Composition Change), more than 20 FTIR (Fourier-transform infrared) spectrometers, spread worldwide, provide long-term data records of many atmospheric trace gases. We present a method that uses measured and modelled XCO2 for assessing the consistency of these NDACC data records. Our XCO2 retrieval setup is kept simple so that it can easily be adopted for any NDACC/FTIR-like measurement made since the late 1950s. By a comparison to coincident TCCON (Total Carbon Column Observing Network) measurements, we empirically demonstrate the useful quality of this suggested NDACC XCO2 product (empirically obtained scatter between TCCON and NDACC is about 4‰ for daily mean as well as monthly mean comparisons, and the bias is 25‰). Our XCO2 model is a simple regression model fitted to CarbonTracker results and the Mauna Loa CO2 in situ records. A comparison to TCCON data suggests an uncertainty of the model for monthly mean data of below 3‰. We apply the method to the NDACC/FTIR spectra that are used within the project MUSICA (multi-platform remote sensing of isotopologues for investigating the cycle of atmospheric water) and demonstrate that there is a good consistency for these globally representative set of spectra measured since 1996: the scatter between the modelled and measured XCO2 on a yearly time scale is only 3‰.

The relative abundance of the heavy water isotopologue HDO provides a deeper insight into the atmospheric hydrological cycle. The SCanning Imaging Absorption spectroMeter for Atmospheric CartograpHY (SCIAMACHY) allows for global retrievals of the ratio HDO/HO in the 2.3 micron wavelength range. However, the spectroscopy of water lines in this region remains a large source of uncertainty for these retrievals. We therefore evaluate and improve the water spectroscopy in the range 4174–4300 cm⁻¹ and test if this reduces systematic uncertainties in the SCIAMACHY retrievals of HDO/H₂O. We use a laboratory spectrum of water vapour to fit line intensity, air broadening and wavelength shift parameters. The improved spectroscopy is tested on a series of ground-based high resolution FTS spectra as well as on SCIAMACHY retrievals of H2O and the ratio HDO/H₂O. We find that the improved spectroscopy leads to lower residuals in the FTS spectra compared to HITRAN 2008 and Jenouvrier et al. (2007) spectroscopy, and the retrievals become more robust against changes in the retrieval window. For both the FTS and SCIAMACHY measurements, the retrieved total H₂O columns decrease by 2–4% and we find a negative shift of the HDO/H₂O ratio, which for SCIAMACHY is partly compensated by changes in the retrieval setup and calibration software. The updated SCIAMACHY HDO/H₂O product shows somewhat steeper latitudinal and temporal gradients and a steeper Rayleigh distillation curve, strengthening previous conclusions that current isotope-enabled general circulation models underestimate the variability in the near-surface HDO/H₂O ratio.

This paper presents an improved photon path length probability density function method that permits simultaneous retrievals of column-average greenhouse gas mole fractions and light path modifications through the atmosphere when processing high-resolution radiance spectra acquired from space. We primarily describe the methodology and retrieval setup and then apply them to the processing of spectra measured by the Greenhouse gases Observing SATellite (GOSAT). We have demonstrated substantial improvements of the data processing with simultaneous carbon dioxide and light path retrievals and reasonable agreement of the satellite-based retrievals against ground-based Fourier transform spectrometer measurements provided by the Total Carbon Column Observing Network (TCCON).

The column-averaged dry-air mole fractions of carbon dioxide and methane (XCO2 and XCH4) have been retrieved from Greenhouse gases Observing SATellite (GOSAT) Short-Wavelength InfraRed (SWIR) observations and released as a SWIR L2 product from the National Institute for Environmental Studies (NIES). XCO2 and XCH4 retrieved using the version 01.xx retrieval algorithm showed large negative biases and standard deviations (−8.85 and 4.75 ppm for XCO2 and −20.4 and 18.9 ppb for XCH4, respectively) compared with data of the Total Carbon Column Observing Network (TCCON). Multiple reasons for these error characteristics (e.g., solar irradiance database, handling of aerosol scattering) are identified and corrected in a revised version of the retrieval algorithm (version 02.xx). The improved retrieval algorithm shows much smaller biases and standard deviations (−1.48 and 2.09 ppm for XCO2 and −5.9 and 12.6 ppb for XCH4, respectively) than the version 01.xx. Also, the number of post-screened measurements is increased, especially at northern mid- and high-latitudinal areas.

We retrieved column-averaged dry air mole fractions of atmospheric carbon dioxide (X_CO_2) from backscattered short-wave infrared (SWIR) sunlight measured by the Japanese Greenhouse gases Observing SATellite (GOSAT). Over two years of X_CO_2 retrieved from GOSAT is compared with X_CO_2 inferred from collocated SWIR measurements by seven ground-based Total Carbon Column Observing Network (TCCON) stations. The average difference between GOSAT and TCCON X_CO_2 for individual TCCON sites ranges from −0.87 ppm to 0.77 ppm with a mean value of 0.1 ppm and standard deviation of 0.56 ppm. We find an average bias between all GOSAT and TCCON X_CO_2 retrievals of −0.20 ppm with a standard deviation of 2.26 ppm and a correlation coefficient of 0.75. One year of XCO2 was retrieved from GOSAT globally, which was compared to global 3-D GEOS-Chem chemistry transport model calculations. We find that the latitudinal gradient, seasonal cycles, and spatial variability of GOSAT and GEOS-Chem agree well in general with a correlation coefficient of 0.61. Regional differences between GEOS-Chem model calculations and GOSAT observations are typically less than 1 ppm except for the Sahara and central Asia where a mean difference between 2 to 3 ppm is observed, indicating regional biases in the GOSAT X_CO_2 retrievals unobserved by the current TCCON network. Using a bias correction scheme based on linear regression these regional biases are significantly reduced, approaching the required accuracy for surface flux inversions.

The in situ boundary layer measurement site in Białystok (Poland) has been upgraded with a fully automated observatory for total greenhouse gas column measurements. The automated Fourier Transform Spectrometer (FTS) complements the on-site in situ facilities and FTS solar absorption measurements have been recorded nearly continuously in clear and partially cloudy conditions since March 2009. Here, the FTS measurements are compared with the collocated tall tower data. Additionally, simulations of the Jena CO_2 inversion model are evaluated with the Białystok measurement facilities. The simulated seasonal CO2 cycle is slightly overestimated by a mean difference of 1.2 ppm ± 0.9 ppm (1σ) in comparison with the FTS measurements. CO_2 concentrations at the surface, measured at the tall tower (5 m, 90 m, 300 m), are slightly underestimated by −1.5 ppm,−1.6 ppm, and −0.7 ppm respectively during the day and by −9.1 ppm,−5.9 ppm, and −1.3 ppm during the night. The comparison of the simulated CO_2 profiles with low aircraft profiles shows a slight overestimation of the lower troposphere (by up to 1 ppm) and an underestimation in near-surface heights until 800 m (by up to 2.5 ppm). In an appendix the automated FTS observatory, including the hardware components and the automation software, is described in its basics.

SCIAMACHY onboard ENVISAT (launched in 2002) enables the retrieval of global long-term column-averaged dry air mole fractions of the two most important anthropogenic greenhouse gases carbon dioxide and methane (denoted XCO2 and XCH4). In order to assess the quality of the greenhouse gas data obtained with the recently introduced v2 of the scientific retrieval algorithm WFM-DOAS, we present validations with ground-based Fourier Transform Spectrometer (FTS) measurements and comparisons with model results at eight Total Carbon Column Observing Network (TCCON) sites providing realistic error estimates of the satellite data. Such validation is a prerequisite to assess the suitability of data sets for their use in inverse modelling. It is shown that there are generally no significant differences between the SCIAMACHY and CarbonTracker carbon dioxide annual increases (2:000:16 ppm/yr compared to 1:940:03 ppm/yr on global average). The XCO2 seasonal cycle amplitudes derived from SCIAMACHY are typically larger than those from TCCON which are in turn larger than those from CarbonTracker. The absolute values of the northern hemispheric TCCON seasonal cycle amplitudes are closer to SCIAMACHY than to CarbonTracker and the corresponding differences are not significant when compared with SCIAMACHY, whereas they can be significant when compared with CarbonTracker. At Darwin we find discrepancies of the seasonal cycle derived from SCIAMACHY compared to the other data sets which can probably be ascribed to occurrences of undetected thin clouds. Based on the comparison with the reference data, we conclude that the carbon dioxide data set can be characterised by a regional relative precision of about 2:2 ppm and a relative accuracy of 1:1-1:2 ppm for monthly average composites within a radius of 500 km. For methane, prior to November 2005, the regional relative precision amounts to 12 ppb and the relative accuracy is about 3 ppb with respect to model simulations for monthly composite averages within the same radius. The loss of some spectral detector pixels results in a degradation of performance thereafter in the spectral range currently used for the methane column retrieval. This leads to larger scatter and less methane retrieved in the tropics for the subsequent time period degrading the relative accuracy. As a result, the overall relative precision is estimated to be 17 ppb and the relative accuracy is in the range of about 10-20 ppb for monthly averages within a radius of 500 km. The derived estimates show that the SCIAMACHY XCH4 data set before November 2005 is suitable for regional source/sink determination via inverse modelling worldwide. In addition, the XCO2 monthly data potentially provide valuable information in continental regions, where there is sparse sampling by surface flask measurements., JRC.H.2-Air and Climate

We compare two conceptually different methods for determining methane column-averaged mixing ratios (XCH4) from Greenhouse Gases Observing Satellite (GOSAT) shortwave infrared (SWIR) measurements. These methods account differently for light scattering by aerosol and cirrus. The proxy method retrieves a CO2 column which, in conjunction with prior knowledge on CO2 acts as a proxy for scattering effects. The physics-based method accounts for scattering by retrieving three effective parameters of a scattering layer. Both retrievals are validated on a 19-month data set using ground-based XCH4 measurements at 12 stations of the Total Carbon Column Observing Network (TCCON), showing comparable performance: for the proxy retrieval we find station-dependent retrieval biases from -0.312% to 0.421% of XCH4 with a standard deviation of 0.22% and a typical precision of 17 ppb. The physics method shows biases between -0.836% and -0.081% with a standard deviation of 0.24% and a precision similar to the proxy method. Complementing this validation we compared both retrievals with simulated methane fields from a global chemistry-transport model. This identified shortcomings of both retrievals causing biases of up to 1ings and provide a satisfying validation of any methane retrieval from space-borne SWIR measurements, in our opinion it is essential to further expand the network of TCCON stations. © Copyright 2012 by the American Geophysical Union.

The Total Carbon Column Observing Network (TCCON) is a ground-based network of Fourier Transform Spectrometer (FTS) sites around the globe, where the column abundances of CO₂, CH₄, N₂O, CO and O₂ are measured. CO₂ is constrained with a precision better than 0.25% (1-σ). To achieve a similarly high accuracy, calibration to World Meteorological Organization (WMO) standards is required. This paper introduces the first aircraft calibration campaign of five European TCCON sites and a mobile FTS instrument. A series of WMO standards in-situ profiles were obtained over European TCCON sites via aircraft and compared with retrievals of CO₂ column amounts from the TCCON instruments. The results of the campaign show that the FTS measurements are consistently biased 1.1% ± 0.2% low with respect to WMO standards, in agreement with previous TCCON calibration campaigns. The standard a priori profile for the TCCON FTS retrievals is shown to not add a bias. The same calibration factor is generated using aircraft profiles as a priori and with the TCCON standard a priori. With a calibration to WMO standards, the highly precise TCCON CO₂ measurements of total column concentrations provide a suitable database for the calibration and validation of nadir-viewing satellites.

The Bremen Optimal Estimation differential optical absorption spectroscopy (DOAS) (BESD) algorithm for satellite based retrievals of XCO_2 (the column-average dry-air mole fraction of atmospheric CO_2) has been applied to Scanning Imaging Absorption Spectrometer for Atmospheric Cartography (SCIAMACHY) data. It uses measurements in the O_2-A absorption band to correct for scattering of undetected clouds and aerosols. Comparisons with precise and accurate ground-based Fourier transform spectrometer (FTS) measurements at four Total Carbon Column Observing Network (TCCON) sites have been used to quantify the quality of the new SCIAMACHY XCO_2 data set. Additionally, the results have been compared to NOAA's assimilation system CarbonTracker. The comparisons show that the new retrieval meets the expectations from earlier theoretical studies. We find no statistically significant regional XCO_2 biases between SCIAMACHY and the FTS instruments. However, the standard error of the systematic differences is in the range of 0.2 ppm and 0.8 ppm. The XCO_2 single-measurement precision of 2.5 ppm is similar to theoretical estimates driven by instrumental noise. There are no significant differences found for the year-to-year increase as well as for the average seasonal amplitude between SCIAMACHY XCO_2 and the collocated FTS measurements. Comparison of the year-to-year increase and also of the seasonal amplitude of CarbonTracker exhibit significant differences with the corresponding FTS values at Darwin. Here the differences between SCIAMACHY and CarbonTracker are larger than the standard error of the SCIAMACHY values. The difference of the seasonal amplitude exceeds the significance level of 2 standard errors. Therefore, our results suggest that SCIAMACHY may provide valuable additional information about XCO_2, at least in regions with a low density of in situ measurements.