Search

Liquid spectroscopy in the mid-infrared spectral range is a very powerful, yet premature technique for selective and sensitive molecule detection. Due to the lack of suitable concepts and materials for versatile miniaturized sensors, it is often still limited to bulky systems and offline analytics. Mid-infrared plasmonics is a promising field of current research for such compact and surface-sensitive structures, enabling new pathways for much-needed photonic integrated sensors. In this work, we focus on extending the concept of Ge/Au-based mid-infrared plasmonic waveguides to enable broadband liquid detection. Through the implementation of high-quality dielectric passivation layers deposited by atomic layer deposition (ALD), we cover the weak and water-soluble Ge native oxide. We show that approximately 10 nm of e.g. Al2O3 or ZrO2 can already protect the plasmonic waveguides for up to 90 min of direct water exposure. This unlocks integrated sensing schemes for broadband molecule detection based on mid-infrared plasmonics. In a proof-of-concept experiment, we further demonstrate that the ZrO2 coated waveguides can be activated by surface functionalization, allowing the selective measurement of diethyl ether at a wavelength of 9.38 {\mu}m.

Long-wave infrared (LWIR, 8-14 um) photonics is a rapidly growing research field within the mid-IR with applications in molecular spectroscopy and optical free-space communication. LWIR-applications are often addressed using rather bulky tabletop-sized free-space optical systems, preventing advanced photonic applications such as rapid-time-scale experiments. Here, device miniaturization into photonic integrated circuits (PICs) with maintained optical capabilities is key to revolutionize mid-IR photonics. Sub-wavelength mode confinement in plasmonic structures enabled such miniaturization approaches in the visible-to-near-IR spectral range. However, adopting plasmonics for the LWIR needs suitable low-loss and -dispersion materials with compatible integration strategies to existing mid-IR technology. In this work we further unlock the field of LWIR/mid-IR PICs, by combining photolithographic patterning of organic polymers with dielectric-loaded surface plasmon polariton (DLSPP) waveguides. In particular, polyethylene shows favorable optical properties, including low refractive index and broad transparency between ~2-200 um. We investigate the whole value chain, including design, fabrication, and characterization of polyethylene-based DLSPP waveguides and demonstrate their first-time plasmonic operation and mode guiding capabilities along s-bend structures. Low bending losses of ~1.3 dB and straight-section propagation lengths of ~1 mm, pave the way for unprecedented, complex on-chip mid-IR photonic devices. Moreover, DLSPPs allow full control of the mode parameters (propagation length and guiding capabilities) for precisely addressing advanced sensing and telecommunication applications with chip-scale devices.

We demonstrate Resonant Tunneling Diodes, embedded in double metal cavities, strongly coupled to the cavity field, while maintaining their electronic properties. We measure the polariton dispersion and find a relative vacuum Rabi splitting of 16%, which explicitly qualifies for the strong-coupling regime. Additionally we show that electronic transport has a significant influence on the polaritons by modulating the coupling strength. The merge between electronic transport and polaritonic physics in our devices opens up a new aspect of cavity quantum electro-dynamics and integrated photonics.

Spectral fingerprints of molecules are mostly accessible in the terahertz and mid-infrared ranges, such that efficient molecular-detection technologies rely on broadband coherent light sources at such frequencies. THz Quantum Cascade Lasers can achieve octave-spanning bandwidths. However, their tunability and wavelength selectivity is often constrained by the geometry of their cavity. The recently introduced Quantum Cascade Random Lasers represent alternative sources of THz light, in which random scattering provides the required field confinement. The random resonator geometry greatly relaxes wavelength selectivity, thus producing radiation that is both spectrally broadband and collimated in the far-field. Yet, the intrinsic randomness of these devices' spectral emission strongly restricts the scope of their potential applications. In this work, we demonstrate the all-optical adaptive control and tuning of Quantum Cascade Random Lasers. The specificity of our random-laser sources is exploited to locally modify the system's permittivity with a near-infrared (NIR) laser beam and thereby substantially reconfigure the distribution of disorder. Using a spatial light modulator combined with an optimization procedure, the NIR illumination is spatially modulated to reshape the spectral emission and transform the initially multimode laser into a single mode source, which could be harnessed to perform self-referenced spectroscopic measurements. Moreover, we show that local NIR perturbations can be used to sense linear and nonlinear interactions amongst modes in the near field. Our work points the way towards the design of broadly tunable THz sources with greatly relaxed fabrication constraints., Comment: 11 pages, 3 figures

The generation of mid-infrared pulses in monolithic and electrically pumped devices is of great interest for mobile spectroscopic instruments. The gain dynamics of interband cascade lasers (ICL) are promising for mode-locked operation at low threshold currents. Here, we present conclusive evidence for the generation of picosecond pulses in ICLs via active mode-locking. At small modulation power, the ICL operates in a linearly chirped frequency comb regime characterized by strong frequency modulation. Upon increasing the modulation amplitude, the chirp decreases until broad pulses are formed. Careful tuning of the modulation frequency minimizes the remaining chirp and leads to the generation of 3.2 ps pulses.

Optical frequency combs enable all-solid-state spectrometers that will trigger a breakthrough in miniaturization and on-chip integration of mid-infrared sensing technology. Interband cascade lasers (ICLs) are an ideal candidate for practical implementations due to their low power consumption and zero-bias detection functionality. Here, we demonstrate the generation of self-starting ICL frequency combs. We show that the gain is fast enough to respond to beating of the intracavity field, which hinders the formation of short pulses. Instead, the ICL operates in a comb state, where the phases of the fundamental intermode beatings are splayed over a range of $2\pi$. This state appears to be general to self-starting combs based on the inherent gain nonlinearity and minimizes oscillations of the population inversion. Using the same epi-layer material, we demonstrate efficient detector operation at room temperature up to several GHz bandwidth and thereby provide a complete and unmatched platform for monolithic and battery driven dual-comb spectroscopy.

The addition of boron to GaAs nanowires grown by self-catalyzed molecular beam epitaxy was found to have a strong effect on the nanowire morphology, with axial growth greatly reduced as the nominal boron concentration was increased. Transmission electron microscopy measurements show that the Ga catalyst droplet was unintentionally consumed during growth. Concurrent radial growth, a rough surface morphology and tapering of nanowires grown under boron flux suggest that this droplet consumption is due to reduced Ga adatom diffusion on the nanowire sidewalls in the presence of boron. Modelling of the nanowire growth puts the diffusion length of Ga adatoms under boron flux at around 700-1000nm. Analyses of the nanowire surfaces show regions of high boron concentration, indicating the surfactant nature of boron in GaAs.

Quantum cascade laser (QCL) frequency combs are a promising candidate for chemical sensing and biomedical diagnostics, requiring only milliseconds of acquisition time to record absorption spectra without any moving parts. They are electrically pumped and have a small footprint, making them an ideal platform for on-chip integration. Until now, optical feedback is fatal for frequency comb generation in QCLs and destroys intermodal coherence. This property imposes strict limits on the possible degree of integration. Here, we demonstrate coherent injection locking of the repetition frequency to a stabilized RF oscillator. For the first time, we prove that the spectrum of the injection locked QCL can be phase-locked, resulting in the generation of a frequency comb. We show that injection locking is not only a versatile tool for all-electrical frequency stabilization, but also mitigates the fatal effect of optical feedback on the frequency comb. A prototype self-detected dual-comb setup consisting only of an injection locked dual-comb chip, a lens and a mirror demonstrates the enormous potential for on-chip dual-comb spectroscopy. These results pave the way to miniaturized and all-solid-state mid-infrared spectrometers.

We demonstrate a convenient and fast method to measure the spectrally resolved far-fields of multimode terahertz quantum cascade lasers by combining a microbolometer focal plane array with an FTIR spectrometer. Far-fields of fundamental TM0 and higher lateral order TM1 modes of multimode Fabry-P\'erot type lasers have been distinguished, which very well fit to the results obtained by a 3D finite-element simulation. Furthermore, multimode random laser cavities have been investigated, analyzing the contribution of each single laser mode to the total far-field. The presented method is thus an important tool to gain in-depth knowledge of the emission properties of multimode laser cavities at terahertz frequencies, which become increasingly important for future sensing applications., Comment: 8 pages, 4 figures

Broadband coherent light sources are becoming increasingly important for sensing and spectroscopic applications, especially in the mid-infrared and terahertz (THz) spectral regions, where the unique absorption characteristics of a whole host of molecules are located. The desire to miniaturize such light emitters has recently lead to spectacular advances with compact on-chip lasers that cover both of these spectral regions. The long wavelength and the small size of the sources result in a strongly diverging laser beam that is difficult to focus on the target that one aims to perform spectroscopy with. Here, we introduce an unconventional solution to this vexing problem relying on a random laser to produce coherent broadband THz radiation as well as an almost diffraction limited far-field emission profile. Our random lasers do not require any fine-tuning and thus constitute a promising example of practical device applications for random lasing., Comment: 12 pages, 8 figures

The monolithic integration of novel nanomaterials with mature and established technologies has considerably widened the scope and potential of nanophotonics. For example, the integration of single semiconductor quantum dots into photonic crystals has enabled highly efficient single-photon sources. Recently, there has also been an increasing interest in using graphene - a single atomic layer of carbon - for optoelectronic devices. However, being an inherently weak optical absorber (only 2.3 % absorption), graphene has to be incorporated into a high-performance optical resonator or waveguide to increase the absorption and take full advantage of its unique optical properties. Here, we demonstrate that by monolithically integrating graphene with a Fabry-Perot microcavity, the optical absorption is 26-fold enhanced, reaching values >60 %. We present a graphene-based microcavity photodetector with record responsivity of 21 mA/W. Our approach can be applied to a variety of other graphene devices, such as electro-absorption modulators, variable optical attenuators, or light emitters, and provides a new route to graphene photonics with the potential for applications in communications, security, sensing and spectroscopy., Comment: 19 pages, 4 figures